Benefits · Relatively small bending radii thanks to highly flexible cable design · Compact design enables small outer diameters despite high number of cores · With conductor cross-sections from 014 mm² for low-frequency data transmission · Proven cable successfully tested for over 2 million bending cycles in cable chains
Application · Suitable for medium mechanical stress · The PVC outer sheath is somewhat oil-resistant · Can be used in dry and damp rooms · For use in control, regulating and measurement circuits · The cable design allows highly flexible, continuously flexing use in moving machine parts and in the cable chain, with horizontal travel distances of up to 10 m · Can be used universally at machine interfaces for many applications for data and signal transmission in the low-frequency range
Application · The cable can be laid on or under plaster · in pipes, cable ducts · in dry, damp or wet environments · EIB installation mainly consists of sensors/command-transmitters (eg light barriers, switches, thermostats, infrared, wind meters, timers), and actuators (eg engines, heaters, ventilators, lights, blinds) · The product is designed for use in building management, eg for decentralised control of lighting, heating, air-conditioning, ventilation, energy management, blinds, time management, locking systems etc · KNX technology was formed from the merging of three established European bus standards: EIP, EHS (household appliances and consumer electronics) and Batibus (heating/ventilation/air conditioning)