Registar

Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Condições de filtragem

Limpar tudo

  • Estoque
  • Blade diameter (D)(φ)
  • work material
  • Blade length (ℓ)(mm)
    [4-75/1mm unidades]
  • Number of flutes(sheet)
  • Type
  • Coating
    • XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model
      • Volume Discount
      • XAL
      • General Steel
      • 3 Flutes

      MISUMI

      XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model

      The new "standard" square end mill with 45° spiral is available at an ultra-low price
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]1.5 ~ 263SquareFor General Steels (AlCrN, etc.)4 ~ 1245 ~ 100-
      Preço (excluindo IVA) a partir de:
      22.01 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model
      • Volume Discount
      • XAL
      • General Steel
      • 4 Flutes

      MISUMI

      XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model

      The new "standard" square end mill with 45° spiral is available at an ultra-low price
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]5 ~ 384SquareFor General Steels (AlCrN, etc.)4 ~ 2045 ~ 125-
      Preço (excluindo IVA) a partir de:
      22.70 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model
      • Volume Discount
      • XAL
      • General Steel
      • 2 Flutes

      MISUMI

      XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model

      The price of the low-cost classic XAL Series has been further reduced!
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]0.2 ~ 402SquareFor General Steels (AlCrN, etc.)3 ~ 2040 ~ 110-
      Preço (excluindo IVA) a partir de:
      9.33 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model
      • Volume Discount
      • XAL
      • General Steel
      • 4 Flutes

      MISUMI

      XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model

      Popular XAL Series with the 4-flute structure that's ideal for side milling has been further reduced in price!
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]2 ~ 404SquareFor General Steels (AlCrN, etc.)4 ~ 2040 ~ 110-
      Preço (excluindo IVA) a partir de:
      10.86 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
      • Volume Discount
      • XAL
      • General Steel
      • 4 Flutes

      MISUMI

      XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model

      The Misumi's original fine intermediate flute length is available at a reasonable price
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]3 ~ 604SquareFor General Steels (AlCrN, etc.)4 ~ 2045 ~ 130-
      Preço (excluindo IVA) a partir de:
      10.85 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAC series carbide square end mill, 2-flute / short model
      • Volume Discount
      • TiAlN
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      XAC series carbide square end mill, 2-flute / short model

      [Features] -Standard TiAlN Coating
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 20General Steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2.5 ~ 382SquareTiAlN4 ~ 2040 ~ 105-
      Preço (excluindo IVA) a partir de:
      13.92 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAC series carbide square end mill, 4-flute / short model
      • Volume Discount
      • TiAlN
      • General Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      XAC series carbide square end mill, 4-flute / short model

      [Features] -Standard TiAlN coating
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2 ~ 20General Steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]6 ~ 384SquareTiAlN4 ~ 2040 ~ 105-
      Preço (excluindo IVA) a partir de:
      15.43 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAC series carbide square end mill, 4-flute / long model
      • Volume Discount
      • TiAlN
      • General Steel
      • 4 Flutes
      • L (Long)

      MISUMI

      XAC series carbide square end mill, 4-flute / long model

      User friendly TiAlN coated series with long flute length
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ~ 12General Steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]12 ~ 304SquareTiAlN6 ~ 1250 ~ 90-
      Preço (excluindo IVA) a partir de:
      29.70 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Adopting the 3-blade shape, it is resistant to chattering and can operate from plunging to grooving without steps-The unique shape of the chip groove enables grooving with a depth of cut equivalent to that of a 2-blade tool-Adopting the stub-blade length, which is 1. 5 times longer than the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter-Compared with square cutters with 30° spiral angle, both rotation and feed are more than twice as fast-The 45° spiral angle makes it ideal for high-speed machining compared with the general 30° spiral angleIt has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ~ 183SquareFor High Hardness (Silicon Group)6 ~ 1260 ~ 10014 ~ 68
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • S (Short)

      MISUMI

      TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

      [Features] -Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Adopting the 3-flank shape makes it resistant to chatter, The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool-The 45° helix angle makes it ideal for high-speed machining compared to a 30° helix angle for general purpose-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 383SquareFor High Hardness (Silicon Group)4 ~ 2060 ~ 11018 ~ 73
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • SR

      MISUMI

      TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

      [Features] -Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Adopting the 3-flank shape, it is resistant to chatter,-The unique shape of the chip groove enables flute cutting with a depth of cut equivalent to that of a 2-flute tool-This product has an average cutting edge length between TSC-HEM3S (short cutting edge length) and TSC-HEM3R (normal cutting edge length), hence it is called "SR Cutting Edge Length. "-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose cutters with 30° helix angleIt has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ~ 16General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ~ 403SquareFor High Hardness (Silicon Group)6 ~ 1660 ~ 11022 ~ 78
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Adopting the 3-flute shape, it is resistant to chatter and can operate from plunging to grooving without steps-The unique shape of the chip groove enables grooving with a depth of cut equivalent to that of a 2-flute tool-Comparable to 30° helix angle square shoulder cutters, both rotation and feed are more than twice as fast-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle cutters-The coating has high oxidation resistance and hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4 ~ 563SquareFor High Hardness (Silicon Group)6 ~ 2060 ~ 13026 ~ 92
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • L (Long)

      MISUMI

      TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model

      [Features] -Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-The unique shape of the chipbreaker enables grooves to be cut with a depth of cut equivalent to that of a 2-flute tool-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ~ 753SquareFor High Hardness (Silicon Group)6 ~ 2060 ~ 15030 ~ 112
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • S (Short)

      MISUMI

      TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

      [Features] -High performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-The unique shape of the chip groove enables cutting grooves with a depth of cut equivalent to that of a two flute tool-The application of a rounded cutting edge at the rear end of the flute suppresses machining streaks that occur when machining the side face in multiple steps (product shown in Fig. 3 only). -The helix angle of 45° makes it ideal for high-speed machining, compared with the general helix angle of 30°-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]3.5 ~ 303SquareFor High Hardness (Silicon Group)6 ~ 2080 ~ 20030 ~ 140
      Preço (excluindo IVA) a partir de:
      81.25 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-The unique shape of the chip groove enables grooves to be cut with a depth of cut equivalent to that of a 2-blade tool-By adopting a stitch groove length 1. 5 times longer than the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter-Compared to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-The 45° helix angle makes it ideal for high-speed machining compared to a general-purpose cutter with 30° helix angle-it has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating characteristics-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 16General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ~ 244SquareFor High Hardness (Silicon Group)6 ~ 1660 ~ 11014 ~ 74
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)-The unique shape of the chipbreaker enables flute cutting with a depth of cut equivalent to that of a 2-flute tool-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast-The 45° helix angle makes it ideal for high speed machining compared to a general purpose square end mill with 30° helix angle-it has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 384SquareFor High Hardness (Silicon Group)4 ~ 2060 ~ 11018 ~ 72
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • SR

      MISUMI

      TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model

      [Features] -The high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-The unique shape of the chip groove enables cutting grooves with a depth of cut equivalent to that of a two flute tool-This product has an average flute length between TSC-HEM4S (short flute length) and TSC-HEM4R (normal flute length), hence it is called "SR flute length". "-Compared to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-The 45° helix angle makes it ideal for high-speed machining compared to general-purpose end mills with 30° helix angleIt has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ~ 16General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ~ 404SquareFor High Hardness (Silicon Group)6 ~ 1660 ~ 11022 ~ 78
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • L (Long)

      MISUMI

      TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model

      [Features] -The high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-The unique shape of the chip groove enables cutting of grooves with a depth of cut equivalent to that of a 2-flute tool-Compared to square shoulder cutters with 30° helix angle, both rotation and feed are more than twice as fast-The 45° helix angle makes it ideal for high-speed machining compared to a general-purpose 30° helix square cutter-it has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ~ 754SquareFor High Hardness (Silicon Group)6 ~ 2060 ~ 15030 ~ 112
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Due to the unique shape of the chip groove, groove cutting can be performed with a depth of cut comparable to that of a 2-groove.-The application of a rounded blade at the rear end of the groove suppresses machining streaks that occur during multi-step machining of the side face. (Product in Fig. 3 only)-The 45° helix angle makes it ideal for high-speed machining compared to the general 30° helix angleIt has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2 ~ 22General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]3.5 ~ 304SquareFor High Hardness (Silicon Group)6 ~ 2080 ~ 20030 ~ 140
      Preço (excluindo IVA) a partir de:
      64.13 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model

      [Features] -The tool shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-The tool's rigidity is highlighted by shortening the flute length and overall length for shrink fit-Optimal for low to medium speed machining due to the universal 30° helix angle-The tool has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.5 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 122SquareFor High Hardness (Silicon Group)4 ~ 1240 ~ 65-
      Preço (excluindo IVA) a partir de:
      13.09 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model

      [Features] -Provides high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-All-purpose cutter with 2 cutting edges for a wide range of applications-Optimal for machining in the low to medium speed range due to the general-purpose helix angle of 30°-It has a coating with high oxidation resistance and high hardness and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.2 ~ 402SquareFor High Hardness (Silicon Group)3 ~ 2035 ~ 11017 ~ 73
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide square end mill, 2-flute / 2.5D Flute Length model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • SR

      MISUMI

      TSC series carbide square end mill, 2-flute / 2.5D Flute Length model

      The lineup of fine intermediate flute length between short and regular is available only in Misumi
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.5 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.25 ~ 302SquareFor High Hardness (Silicon Group)4 ~ 1245 ~ 8520 ~ 55
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide square end mill, 2-flute / 3.5D Flute Length model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • RL

      MISUMI

      TSC series carbide square end mill, 2-flute / 3.5D Flute Length model

      Lineups of fine intermediate flute length between regular and long are available only in MISUMI.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.5 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.75 ~ 422SquareFor High Hardness (Silicon Group)4 ~ 1245 ~ 9526 ~ 65
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • L (Long)

      MISUMI

      TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)-The 4D flute length supports deep cavity milling-Optimal for low to medium rotation machining due to the universal 30° helix angle-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4 ~ 482SquareFor High Hardness (Silicon Group)4 ~ 1245 ~ 10029 ~ 76
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide square end mill for shrinkage fitting, 4-flute / 1D Flute Length (stub) model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide square end mill for shrinkage fitting, 4-flute / 1D Flute Length (stub) model

      [Features] -The tool shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and quenched and tempered steel (up to 50 HRC)-The rigidity of the tool is emphasized by shortening the flute length and overall length for shrink fit-Optimal for low to medium speed machining due to the universal 30° helix angle-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ~ 124SquareFor High Hardness (Silicon Group)4 ~ 1240 ~ 65-
      Preço (excluindo IVA) a partir de:
      18.32 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide square end mill, 4-flute / 1.5D Flute Length (stub) model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide square end mill, 4-flute / 1.5D Flute Length (stub) model

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Suitable for high-speed machining with 1.5 times groove length-Optimal for low to medium speed machining due to universal 30° helix angle-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 184SquareFor High Hardness (Silicon Group)4 ~ 1240 ~ 75-
      Preço (excluindo IVA) a partir de:
      20.56 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model

      [Features] -The coating shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)-Optimal for low to medium speed machining due to universal 30° helix angle-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ~ 404SquareFor High Hardness (Silicon Group)4 ~ 2040 ~ 11015 ~ 73
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide square end mill, 4-flute / 2.5D Flute Length model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • SR

      MISUMI

      TSC series carbide square end mill, 4-flute / 2.5D Flute Length model

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Slot length is 2.5 times the cutting edge diameter between short and regular flutes-Optimal for machining in low to medium rotation range due to universal 30° helix angle-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 16General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2.5 ~ 404SquareFor High Hardness (Silicon Group)4 ~ 1645 ~ 10519 ~ 73
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide square end mill, 4-flute / 3.5D Flute Length model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • RL

      MISUMI

      TSC series carbide square end mill, 4-flute / 3.5D Flute Length model

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)-The flute length is 3.5 times the cutting diameter between the normal flute and the long flute-Optimal for low to medium speed machining due to the universal 30° helix angle-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 16General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3.5 ~ 564SquareFor High Hardness (Silicon Group)6 ~ 1645 ~ 12026 ~ 88
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide square end mill, 4-flute / 4D Flute Length (long) model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • L (Long)

      MISUMI

      TSC series carbide square end mill, 4-flute / 4D Flute Length (long) model

      [Features] -The cutter shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and quenched and tempered steel (up to 50 HRC)-All-purpose cutter with 4 cutting edges for a wide range of applications-Optimal for machining in the low to medium speed range due to the general-purpose helix angle of 30°-The coating shows high oxidation resistance and high hardness and achieves a long tool life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4 ~ 484SquareFor High Hardness (Silicon Group)4 ~ 1245 ~ 10029 ~ 70
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide radius end mill for countersink, 3-flute / short model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill for countersink, 3-flute / short model

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-By leaving the round land width (the width of the cylindrical part without clearance angle at the circumferential groove), it is possible to achieve an effect similar to that of a reamer and improve the surface roughness of the machined surface-The end cutting edge is almost flat, making it ideal for finishing counterbores. -The 3-flute shape suppresses chatter that can occur during drilling and counterboring-Optimal for machining in the low to medium speed range due to the universal 30° helix angle-The coating has high oxidation resistance and high hardness, achieving long life. Effective in high-speed machining and dry machining as coating characteristics.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ~ 16General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]8 ~ 323SquareFor High Hardness (Silicon Group)6 ~ 1650 ~ 110-
      Preço (excluindo IVA) a partir de:
      56.23 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • Carbide square end mill, 2-flute / 2D Flute Length (short) model
      • Volume Discount
      • Non-Coated
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      Carbide square end mill, 2-flute / 2D Flute Length (short) model

      Excellent in general versatility, it is a 2D flute length type that can be used in a wide range of applications
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.2 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.4 ~ 242SquareNon-Coated3 ~ 1235 ~ 7517 ~ 45
      Data de envio regular:
      5 dias úteis
      Configurar
    • Carbide square end mill, 2-flute / 3D Flute Length (regular) model
      • Volume Discount
      • Non-Coated
      • General Steel
      • 2 Flutes
      • R (Regular)

      MISUMI

      Carbide square end mill, 2-flute / 3D Flute Length (regular) model

      The 3D flute length type that produces high-quality finish supports a wide range of machining areas
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.2 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.6 ~ 362SquareNon-Coated3 ~ 1240 ~ 8523 ~ 55
      Data de envio regular:
      5 dias úteis
      Configurar
    • Carbide square end mill, 4-flute / 2D Flute Length (short) model
      • Volume Discount
      • Non-Coated
      • General Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      Carbide square end mill, 4-flute / 2D Flute Length (short) model

      The 2D flute length type with high versatility achieves high-precision processing including grooving
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 20General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ~ 404SquareNon-Coated4 ~ 2040 ~ 11017 ~ 73
      Data de envio regular:
      5 dias úteis
      Configurar
    • Carbide square end mill, 4-flute / 3D Flute Length (regular) model
      • Volume Discount
      • Non-Coated
      • General Steel
      • 4 Flutes
      • R (Regular)

      MISUMI

      Carbide square end mill, 4-flute / 3D Flute Length (regular) model

      The 3D flute length type that's capable of sophisticated grooving is also known for the producing the high-quality finish
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2 ~ 20General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ~ 604SquareNon-Coated4 ~ 2045 ~ 13023 ~ 92
      Data de envio regular:
      5 dias úteis
      Configurar
    • Carbide square end mill, 4-flute / 4D Flute Length (long) model
      • Volume Discount
      • Non-Coated
      • General Steel
      • 4 Flutes
      • L (Long)

      MISUMI

      Carbide square end mill, 4-flute / 4D Flute Length (long) model

      Achieves both high levels of machining precision and reduction of processing time in side milling
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4 ~ 484SquareNon-Coated4 ~ 1245 ~ 10029 ~ 70
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model
      • Volume Discount
      • TS
      • SUS
      • 3 Flutes
      • S (Short)

      MISUMI

      TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model

      Demonstrates phenomenal performance in processing the difficult-to-cut SUS304
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ~ 16General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]7 ~ 353SquareFor High Hardness (Silicon Group)6 ~ 1660 ~ 105-
      Preço (excluindo IVA) a partir de:
      72.42 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model
      • Volume Discount
      • TS
      • SUS
      • 3 Flutes
      • R (Regular)

      MISUMI

      TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model

      Ideal for the standing-wall finish of stainless steel
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]10.5 ~ 383SquareFor High Hardness (Silicon Group)6 ~ 1260 ~ 100-
      Preço (excluindo IVA) a partir de:
      101.09 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model
      • Volume Discount
      • TS
      • Titanium
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model

      An end mill for titanium machining that performs medium roughing and finish machining at the same time
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      6 ~ 20General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○]14 ~ 424SquareFor High Hardness (Silicon Group)6 ~ 2060 ~ 120-
      Preço (excluindo IVA) a partir de:
      109.35 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • Diamond Coated Carbide Square End Mill for Aluminium Machining, 2-Flute / Regular Model
      • Volume Discount
      • DIA
      • Aluminum
      • 2 Flutes
      • R (Regular)

      MISUMI

      Diamond Coated Carbide Square End Mill for Aluminium Machining, 2-Flute / Regular Model

      Demonstrates the tremendous durability and finishing precision in aluminum machining
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 12Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]3 ~ 362SquareDia Coat4 ~ 1240 ~ 80-
      Preço (excluindo IVA) a partir de:
      78.87 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • DLC Coated Carbide Square End Mill for Aluminium Machining, 2-Flute / 2D Flute Length (Short) Model
      • Volume Discount
      • DLC
      • Aluminum
      • 2 Flutes
      • S (Short)

      MISUMI

      DLC Coated Carbide Square End Mill for Aluminium Machining, 2-Flute / 2D Flute Length (Short) Model

      Short flute length that suppresses chattering
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 20Aluminum[◎] / Copper[○] / Resin[○]2 ~ 402SquareDLC4 ~ 2040 ~ 11017 ~ 73
      Data de envio regular:
      5 dias úteis
      Configurar
    • DLC Coated Carbide Square End Mill for Aluminium Machining, 2-Flute / 3D Flute Length (Regular) Model
      • Volume Discount
      • DLC
      • Aluminum
      • 2 Flutes
      • R (Regular)

      MISUMI

      DLC Coated Carbide Square End Mill for Aluminium Machining, 2-Flute / 3D Flute Length (Regular) Model

      The cutting performance of aluminum has been improved by the combination of sharp edge and DLC coating
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.5 ~ 20Aluminum[◎] / Copper[○] / Resin[○]1.5 ~ 602SquareDLC4 ~ 2040 ~ 13023 ~ 92
      Data de envio regular:
      5 dias úteis
      Configurar
    • DLC Coated Carbide Square End Mill for Aluminium Machining, 2-Flute / 4D Flute Length (Long) Model
      • Volume Discount
      • DLC
      • Aluminum
      • 2 Flutes
      • L (Long)

      MISUMI

      DLC Coated Carbide Square End Mill for Aluminium Machining, 2-Flute / 4D Flute Length (Long) Model

      4D flute length type that's ideal for deep engraving
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ~ 12Aluminum[◎] / Copper[○] / Resin[○]5 ~ 482SquareDLC6 ~ 1260 ~ 10029 ~ 70
      Data de envio regular:
      5 dias úteis
      Configurar
    • DLC Coated Carbide Square End Mill for Aluminium Machining, 3-Flute / 2D Flute Length (Short) Model
      • Volume Discount
      • DLC
      • Aluminum
      • 3 Flutes
      • S (Short)

      MISUMI

      DLC Coated Carbide Square End Mill for Aluminium Machining, 3-Flute / 2D Flute Length (Short) Model

      3-flute structure that's excellent in discharging chips
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 12Aluminum[◎] / Copper[○] / Resin[○]2 ~ 243SquareDLC4 ~ 1240 ~ 8017 ~ 50
      Data de envio regular:
      5 dias úteis
      Configurar
    • DLC Coated Carbide Square End Mill for Aluminium Machining, 3-Flute / 3D Flute Length (Regular) Model
      • Volume Discount
      • DLC
      • Aluminum
      • 3 Flutes
      • R (Regular)

      MISUMI

      DLC Coated Carbide Square End Mill for Aluminium Machining, 3-Flute / 3D Flute Length (Regular) Model

      The unique tip pocket shape improves the discharging of chips
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.5 ~ 20Aluminum[◎] / Copper[○] / Resin[○]1.5 ~ 603SquareDLC4 ~ 2040 ~ 13023 ~ 92
      Data de envio regular:
      5 dias úteis
      Configurar