Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!
MISUMI
TSC series carbide long neck square end mill, 2-flute / long neck model
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 6 | General Steel[◎] | 0.2 ~ 10 | 2 | Long-Neck Square | For High Hardness (Silicon Group) | 4 ~ 6 | 40 ~ 100 | 0.3 ~ 60 |
MISUMI
XAL series carbide square end mill, 2-flute / 3D Flute Length model
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 20 | General Steel[◎] | 0.3 ~ 60 | 2 | Square | For General Steels (AlCrN, etc.) | 3 ~ 20 | 40 ~ 110 | - |
MISUMI
TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
1 ~ 20 | General Steel[◎] | 3 ~ 60 | 4 | Square | For High Hardness (Silicon Group) | 4 ~ 20 | 45 ~ 130 | 23 ~ 92 |
MISUMI
TSC series carbide long neck square end mill, 4-flute / long neck model
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
1 ~ 6 | General Steel[◎] | 1.5 ~ 10 | 4 | Long-Neck Square | For High Hardness (Silicon Group) | 4 ~ 6 | 40 ~ 100 | 4 ~ 50 |
OSG
WXL-Coated 2-Flute 2D Flute Length Type WXL-2D-DE
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 30 | General Steel[◎] | 0.2 ~ 60 | 2 | Square | For General Steels (AlCrN, etc.) | 4 ~ 32 | 45 ~ 140 | - |
SANDVIK
SANDVIK CoroMill Plura Solid Carbide End Mill for High Feed Face Milling
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
4 ~ 20 | General Steel[○] | 0.2 ~ 1.3 | 4 | - | - | 6 ~ 20 | - | - |
MISUMI
TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
0.2 ~ 20 | General Steel[◎] | 0.6 ~ 60 | 2 | Square | For High Hardness (Silicon Group) | 3 ~ 20 | 40 ~ 130 | 23 ~ 92 |
MISUMI
XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
0.5 ~ 12 | General Steel[◎] | 2 ~ 48 | 2 | Square | For General Steels (AlCrN, etc.) | 4 ~ 12 | 45 ~ 100 | - |
UNION TOOL
C-CES2000 UT Coat, 2-Flute Square
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 20 | General Steel[◎] | 0.15 ~ 48 | 2 | Square | TiCN | 3 ~ 20 | 38 ~ 110 | - |
SANDVIK
End Mill For Roughing & Semi-Finishing (Center Cut / Double Fluted) Hardness: 43 ≦ HRC ≦ 63
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
2 ~ 20 | General Steel[○] | 7 ~ 38 | 3 ~ 4 | Square | TiCN | 6 ~ 20 | 57 ~ 125 | - |
MISUMI
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
1 ~ 20 | General Steel[◎] | 4 ~ 56 | 4 | Square | For High Hardness (Silicon Group) | 6 ~ 20 | 60 ~ 130 | 26 ~ 92 |
MISUMI
TSC series carbide end mill for key grooves, 2-flute / short model
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
2 ~ 14 | General Steel[◎] | 3 ~ 21 | 2 | Square | For High Hardness (Silicon Group) | 6 ~ 16 | 45 ~ 75 | - |
NACHI(FUJIKOSHI)
GSX MILL 4-Flute Blade 2D GSX4C-2D
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
3 ~ 12 | General Steel[◎] | 6 ~ 24 | 4 | Square | For General Steels (AlCrN, etc.) | 6 ~ 12 | 45 ~ 75 | - |
NS TOOL
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
0.5 ~ 6 | General Steel[◎] | 1 ~ 12 | 2 | Square | Non-Coated | 3 ~ 6 | 35 ~ 55 | - |
NS TOOL
MUGEN-COATING PREMIUM 2-Flute LEAD 25 End Mill MXH225
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 6 | General Steel[◎] | 0.1 ~ 6 | 2 | Square | For High Hardness (Silicon Group) | 4 ~ 6 | 45 ~ 50 | - |
OSG
Carbide Counterboring Series FX Coated For Counterboring 2 Flute Short FX-ZDS
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
3 ~ 20 | General Steel[◎] | 8 ~ 38 | 2 | Square | TiAlN | 6 ~ 20 | 50 ~ 125 | - |
OSG
Carbide Vibration-Proof End Mill AE-VMS
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
3 ~ 12 | General Steel[◎] | 8 ~ 26 | 4 | Square | - | 6 ~ 12 | 60 ~ 90 | - |
THE CUT
Coated (TiAIN) Solid Carbide End Mills (4 Flutes) IC4SSV
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
11 | General Steel[○] | 30 | 4 | Square | TiAlN | 12 | 75 | - |
MISUMI
TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
0.5 ~ 20 | General Steel[◎] | 0.75 ~ 30 | 2 | Square | For High Hardness (Silicon Group) | 4 ~ 20 | 40 ~ 105 | - |
MISUMI
TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
1 ~ 6 | General Steel[◎] | 1.5 ~ 13 | 3 | Long-Neck Square | For High Hardness (Silicon Group) | 4 ~ 6 | 50 ~ 100 | 4 ~ 60 |
MISUMI
Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
3.15 ~ 19.99 | General Steel[◎] | 3.5 ~ 48 | 2 | Square | Non-Coated | 6 ~ 20 | 40 ~ 105 | - |
MISUMI
XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
1 ~ 12 | General Steel[◎] | 5 ~ 60 | 4 | Square | For General Steels (AlCrN, etc.) | 4 ~ 12 | 45 ~ 105 | - |
MISUMI
VAC Series Carbide 4-Flute Uneven Lead Square End Mill
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
2 ~ 20 | General Steel[◎] | 6 ~ 45 | 4 | Square | - | 6 ~ 20 | 50 ~ 100 | - |
MISUMI
VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
3 ~ 25 | General Steel[◎] | 8 ~ 38 | 4 | Square | - | 6 ~ 25 | 57 ~ 104 | - |
OSG
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 20 | General Steel[◎] | 0.3 ~ 60 | 2 | Square | For General Steels (AlCrN, etc.) | 4 ~ 20 | 45 ~ 130 | - |
OSG
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
0.2 ~ 30 | General Steel[◎] | 0.4 ~ 45 | 2 | Square | TiAlN | 3 ~ 32 | 40 ~ 125 | - |
OSG
WX Super Coat, Multi-Flutes, Short, WXS-EMS
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
8 | General Steel[◎] | 19 | 6 | Square | For High Hardness (Silicon Group) | 8 | 70 | - |
UNION TOOL
HLS, HM Coated 2-Flute Long Neck Square
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 6 | General Steel[○] | 0.1 ~ 9 | 2 | Long-Neck Square | For High Hardness (Silicon Group) | 4 ~ 6 | 45 ~ 120 | 0.3 ~ 60 |
UNION TOOL
C-CES4000S UT Coat, 4-Flute Square (Sharp Corner)
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
1 ~ 12 | General Steel[◎] | 2.5 ~ 26 | 4 | Square | TiCN | 4 ~ 12 | 45 ~ 75 | - |
NS TOOL
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
0.5 ~ 12 | General Steel[◎] | 1.5 ~ 36 | 2 | Square | Non-Coated | 4 ~ 12 | 40 ~ 85 | - |
NS TOOL
Ultra-Fine Machining End Mill Micro Edge MSME100
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
0.01 ~ 0.05 | General Steel[◎] | 0.01 ~ 0.05 | 1 | Square | Non-Coated | 4 | 45 | - |
NS TOOL
MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing)
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 6 | General Steel[◎] | 0.15 ~ 9 | 2 | Long-Neck Square | TiAlN | 4 ~ 6 | 45 ~ 120 | 0.3 ~ 60 |
NS TOOL
MX230 MUGEN-COATING 2-Flute LEAD 30 End Mill
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 12 | General Steel[◎] | 0.2 ~ 24 | 2 | Square | TiAlN | 4 ~ 12 | 45 ~ 80 | - |
NS TOOL
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
3 ~ 12 | General Steel[◎] | 8 ~ 23 | 3 | Square | Non-Coated | 6 ~ 12 | 45 ~ 70 | - |
OKAZAKI SEIKO
SED2LA Long Square End Mill, 2-Flute, OK Coated
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
3 ~ 20 | General Steel[◎] | 15 ~ 80 | 2 | Long-Neck Square | TiAlN | 6 ~ 20 | 70 ~ 150 | - |
OKAZAKI SEIKO
SED2M Medium Square End Mill, 2-Flute, Non-Coated
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
1 ~ 12 | General Steel[◎] | 4 ~ 36 | 2 | Square | Non-Coated | 4 ~ 12 | 45 ~ 75 | - |
OKAZAKI SEIKO
SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
3 ~ 20 | General Steel[◎] | 15 ~ 80 | 4 | High Helical | TiAlN | 6 ~ 20 | 70 ~ 150 | - |
OKAZAKI SEIKO
SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
5 ~ 22 | General Steel[◎] | 8 ~ 32 | 4 | High Helical | Non-Coated | 4 ~ 20 | 70 ~ 150 | - |
KYOWA SEIKO
Carbide Center V End Mill (with Rounded Tip) KSVRA-2
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
1 ~ 6 | General Steel[◎] | 2 ~ 12 | 2 | - | TiAlN | 4 ~ 6 | 50 ~ 60 | - |
SANDVIK
CoroMill Plura End Mill For Finishing, Cylindrical Shank With Corner Radius
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
3 ~ 20 | General Steel[○] | 8 ~ 38 | 4 ~ 8 | Square | TiCN | 6 ~ 20 | 57 ~ 104 | - |
SANDVIK
Dedicated CoroMill Plura End Mill For Roughing & Finishing, 2P340-PA
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
2 ~ 25 | General Steel[○] | 7.5 ~ 45.5 | 4 | Square | - | 6 ~ 25 | 57 ~ 121 | - |
OSG
Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
3 ~ 12 | General Steel[◎] | 4.5 ~ 18 | 4 | Square | - | 6 ~ 12 | 45 ~ 75 | - |
SANDVIK
SANDVIK CoroMill 316 Solid Carbide Head for High Chip Load Milling
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
- | General Steel[○] | 10 | 2 | - | - | - | - | - |
MISUMI
XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
1 ~ 12 | General Steel[◎] | 1.5 ~ 26 | 3 | Square | For General Steels (AlCrN, etc.) | 4 ~ 12 | 45 ~ 100 | - |
MISUMI
XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model
Blade diameter (D)(φ) | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Type | Coating | Shank diameter (d)(mm) | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) |
---|---|---|---|---|---|---|---|---|
2 ~ 20 | General Steel[◎] | 5 ~ 38 | 4 | Square | For General Steels (AlCrN, etc.) | 4 ~ 20 | 45 ~ 125 | - |