High Helical End Mills (Carbide)（work material：General Steel）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
XAC series carbide high-helical end mill, for high-hardness steel machining, multi-blade, 45° torsion / regular model
MISUMI
[Features]
-Designed with a tool shape that increases rigidity for machining high hardness steels
-Since it is designed with a large rake angle, it can also be used on machines where the cutting speed is not increased
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TiAlN
- High-Hardness Steel
- Multi-Flutes （5 ~）
Configure nowStarting from∗ ： 41.22 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model
MISUMI
The high precision high helical end mill for shrink fit holder is ideal for side finishing- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- B (Stub)
Configure nowStarting from∗ ： 98.32 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less)
MISUMI
[Features]
-Cutting edge runout accuracy within 5µm (compared to manufacturer's measurements), back taper within 5µm and shank diameter tolerance h5 standards are used, making it ideal for lateral surface machining that requires high precision using high quality tools with low quality variation
-Designed with a blade shape that emphasises sharpness with positive blade and cutting edge sharpness corner, suitable for machining raw material such as carbon steel.- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- R (Regular)
Configure nowStarting from∗ ： 94.04 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model
MISUMI
[Features]
When machining raw material, heat-treated steel, aluminium, etc., finishing standing walls for mould bottom (main mould), etc., they show their strength thanks to the positive rake angle, sharp corners of the bottom edge and strong bevel angle of 53°
-High tool rigidity minimises tool tilt during side milling.- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model
MISUMI
[Features]
-When machining raw material, heat-treated steel, aluminium, etc., when finishing standing walls of the mould bottom (main mould), etc., they show their strength thanks to the positive rake angle, the sharp corners of the bottom edge and the strong bevel angle of 53°
-High tool rigidity minimises tool tilt during side milling.- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
XAC series carbide high-helical end mill for high-hardness steel machining, multi-blade, 45° torsion / long model
MISUMI
The expensive long flute type for high hardness is offered at an affordable price- Volume Discount
- TiAlN
- High-Hardness Steel
- Multi-Flutes （5 ~）
Configure nowStarting from∗ ： 46.60 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated
OKAZAKI SEIKO
Unique blade type and OK hard coating enable high speed machining of high hardness materials up to 65 HRC.- Volume Discount
Configure nowStarting from∗ ： 90.77 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated
OKAZAKI SEIKO
Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.- Volume Discount
Configure nowStarting from∗ ： 112.92 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SPEED / T 3 Flute Anti-Vibration
SPEED TIGER
[Features]
· High helical type with 3-flute blade ideal for grooving.
· Supports high speed processing and large cutting depth with vibration prevention effects due to core thickness change.
· P type T coat has a high thermal oxidation temperature and surface hardness, provides a long life, and has a wide range of compatible work materials.Configure nowStarting from∗ ： 17.18 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SPEED / T 4 Flute Anti-Vibration High Border
SPEED TIGER
[Features]
· High helical type focusing on finishing with high speed processing and vibration prevention effects due to core thickness change.
· P type T coat has a high thermal oxidation temperature and surface hardness, and provides a long life.
· Can be used with a wide range of applicable cutting materials.
· Focuses on usability with a long blade length of 30 mm and a blade diameter of ø10.Configure nowStarting from∗ ： 49.41 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Carbide 4-Flute High-Hardness End Mill 55° E168TX
7 LEADERS
[Features]
· High performance 4-flute 55° high torsion end mill for machining high hardness materials with UMG carbide substrate.
· Enables high-efficiency machining in side cutting of high-hardness materials (up to HRC 70).
· Nanoparticle multilayer coating.
· Suitable for machining high-hardness materials from HRC 45 to 70 due to high sheath harness and high initial oxidation temperature.
· Suitable for a wide range of work materials from general steel to high hardness steel.- Volume Discount
Configure nowStarting from∗ ： 55.21 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 93.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 115.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Solid Carbide High Helix (45°) End Mill For High Hardnesses (4 Flutes), IC4HST
THE CUT
[Features]
· Demonstrates excellent wear and heat resistance thanks to its special coating geared towards high hardness materials.
· Capable of machining a wide range of workpieces from alloy steel to high hardness steel (HRC55 or lower.)
· The 4 flutes and 45° torsion angle help reduce cutting resistance and provide a quality finished surface.Configure nowStarting from∗ ： 47.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Solid Carbide High Helix End Mill (6 Flutes) IC6HXE
THE CUT
[Features]
· Outstanding cost performance.
· The special coating improves wear resistance.
· Also good for machining high hardness steel.
· All sizes features 6 flutes.Configure nowStarting from∗ ： 61.97 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Blade diameter (D)(φ) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Coating |
| Shank diameter (d)(mm) |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Blade tip shape |
| Torsion Angle (θ) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OKAZAKI SEIKO | OKAZAKI SEIKO | SPEED TIGER | SPEED TIGER | 7 LEADERS | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | THE CUT | THE CUT |
| Product Series | TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less) | TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model | TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model | SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated | SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated | Solid Carbide High Helix (45°) End Mill For High Hardnesses (4 Flutes), IC4HST | |||||||||
| Starting from∗ | 41.22 € *Unit price with basic configuration Volume Discount | 98.32 € *Unit price with basic configuration Volume Discount | 94.04 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | 46.60 € *Unit price with basic configuration Volume Discount | 90.77 € *Unit price with basic configuration Volume Discount | 112.92 € *Unit price with basic configuration Volume Discount | 17.18 € *Unit price with basic configuration | 49.41 € *Unit price with basic configuration | 55.21 € *Unit price with basic configuration Volume Discount | 93.15 € *Unit price with basic configuration Volume Discount | 115.79 € *Unit price with basic configuration Volume Discount | 47.59 € *Unit price with basic configuration | 61.97 € *Unit price with basic configuration |
| Min. Shipping Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 10 Days | 10 Days | 5 Days | 7 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Specifications |
|
|
|
|
|
| |||||||||
| Blade diameter (D)(φ) | 6 ～ 25 | 3 ～ 12 | 3 ～ 12 | 1 ～ 12 | 1 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 3 | 8 ～ 16 | 3 ～ 20 | 5 | 6 ～ 8 | 6 | 6 |
| work material | General Steel[○] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] |
| Blade length (ℓ)(mm) | 13 ～ 44 | 4.5 ～ 18 | 10 ～ 30 | 2 ～ 24 | 2.5 ～ 45 | 26 ～ 76 | 15 ～ 45 | 15 ～ 45 | 8 | 20 ～ 40 | 8 ～ 38 | 12.5 | 15 ～ 20 | 15 | 15 |
| Number of flutes(sheet) | 6 ～ 8 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 6 ～ 8 | 6 | 6 | 3 | 4 | 4 | 3 | 6 | 4 | 6 |
| Type | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | Square | Square | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical |
| Coating | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - | - | - | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | - |
| Shank diameter (d)(mm) | 6 ～ 25 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 4 | 8 ～ 16 | 6 ～ 20 | 6 | 6 ～ 8 | 6 | 6 |
| Overall Length (L)(mm) | 57 ～ 104 | 50 ～ 75 | 60 ～ 100 | 60 ～ 100 | 60 ～ 130 | 70 ～ 140 | 50 ～ 105 | 80 ～ 150 | 50 | 60 ～ 100 | 50 ～ 100 | 50 | 50 ～ 60 | 50 | 60 |
| Underneck length (ℓ1)(mm) | - | - | - | 17 ～ 70 | 20 ～ 92 | - | - | - | - | - | - | - | - | - | - |
| Machining Application | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Side / Groove / Plunging (Z feed) / Inclined Cuts | Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Countersinking | Groove | Side | Side / Groove | Side |
| Blade tip shape | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | Sharp Edge | Sharp Edge | - | - | With Lead | Sharp Edge | Sharp Edge | - | - |
| Torsion Angle (θ) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Variable lead | Variable lead | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) |
Loading...
Filter by:
-
Blade diameter (D)(φ)
-
work material
-
Blade length (ℓ)(mm)
-
Number of flutes(sheet)
-
Type
- Square
- High Helical
-
Coating
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Blade tip shape
-
Torsion Angle (θ)
Brand
-
- NACHI(FUJIKOSHI) (2)
- OKAZAKI SEIKO (2)
- SPEED TIGER (2)
- THE CUT (2)
- 7 LEADERS (1)
- DIJET (0)
- GUHRING (0)
- OSG (0)
CAD data type
-
- 2D
- 3D
Categories related to High Helical End Mills (Carbide)
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.