Registar
Categoria
Ver mais
Condições de filtragem

Limpar tudo

  • Blade diameter (D)(φ)
  • work material
  • Blade length (ℓ)(mm)
    [5-45/1mm unidades]
  • Number of flutes(sheet)
  • Type
  • Coating
  • Fabricante

High Helical End Mills (Carbide) (work material: Quenched and tempered steel)

    17 itens
    * Informações sobre dias de expedição, custos de expedição e preços
    Lista
    Foto
    Comparar especificações
  • 1
    • SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated
      • Volume Discount

      OKAZAKI SEIKO

      SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated

      Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      6 ～ 20Quenched and tempered steel[◎]15 ～ 456SquareFor High Hardness (Silicon Group)6 ～ 2080 ～ 150-
      Preço regular (excluindo IVA):
      112.92 €～
      Data de envio regular:
      10 dias úteis
      Configurar
    • TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model
      • Volume Discount
      • TS
      • General Steel
      • Multi-Flutes （5 ~）
      • B (Stub)

      MISUMI

      TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model

      The high precision high helical end mill for shrink fit holder is ideal for side finishing
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 12Quenched and tempered steel[◎]4.5 ～ 184 ～ 6High HelicalFor High Hardness (Silicon Group)6 ～ 1250 ～ 75-
      Preço regular (excluindo IVA):
      98.32 €～
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less)
      • Volume Discount
      • TS
      • General Steel
      • Multi-Flutes （5 ~）
      • R (Regular)

      MISUMI

      TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less)

      [Features] -Cutting edge runout accuracy within 5µm (compared to manufacturer's measurements), back taper within 5µm and shank diameter tolerance h5 standards are used, making it ideal for lateral surface machining that requires high precision using high quality tools with low quality variation-Designed with a blade shape that emphasises sharpness with positive blade and cutting edge sharpness corner, suitable for machining raw material such as carbon steel.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 12Quenched and tempered steel[◎]10 ～ 304 ～ 6High HelicalFor High Hardness (Silicon Group)6 ～ 1260 ～ 100-
      Preço regular (excluindo IVA):
      94.04 €～
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model
      • Volume Discount
      • TS
      • General Steel
      • Multi-Flutes （5 ~）
      • S (Short)

      MISUMI

      TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model

      [Features] When machining raw material, heat-treated steel, aluminium, etc., finishing standing walls for mould bottom (main mould), etc., they show their strength thanks to the positive rake angle, sharp corners of the bottom edge and strong bevel angle of 53°-High tool rigidity minimises tool tilt during side milling.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ～ 12Quenched and tempered steel[◎]2 ～ 244 ～ 6High HelicalFor High Hardness (Silicon Group)6 ～ 1260 ～ 10017 ～ 70
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model
      • Volume Discount
      • TS
      • General Steel
      • Multi-Flutes （5 ~）
      • R (Regular)

      MISUMI

      TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model

      [Features] -When machining raw material, heat-treated steel, aluminium, etc., when finishing standing walls of the mould bottom (main mould), etc., they show their strength thanks to the positive rake angle, the sharp corners of the bottom edge and the strong bevel angle of 53°-High tool rigidity minimises tool tilt during side milling.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ～ 20Quenched and tempered steel[◎]2.5 ～ 454 ～ 6High HelicalFor High Hardness (Silicon Group)6 ～ 2060 ～ 13020 ～ 92
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAC series carbide high-helical end mill, for high-hardness steel machining, multi-blade, 45° torsion / regular model
      • Volume Discount
      • TiAlN
      • High-Hardness Steel
      • Multi-Flutes （5 ~）

      MISUMI

      XAC series carbide high-helical end mill, for high-hardness steel machining, multi-blade, 45° torsion / regular model

      [Features] -Designed with a tool shape that increases rigidity for machining high hardness steels-Since it is designed with a large rake angle, it can also be used on machines where the cutting speed is not increased-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      6 ～ 25Quenched and tempered steel[◎]13 ～ 446 ～ 8High HelicalTiAlN6 ～ 2557 ～ 104-
      Preço regular (excluindo IVA):
      41.22 €～
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAC series carbide high-helical end mill for high-hardness steel machining, multi-blade, 45° torsion / long model
      • Volume Discount
      • TiAlN
      • High-Hardness Steel
      • Multi-Flutes （5 ~）

      MISUMI

      XAC series carbide high-helical end mill for high-hardness steel machining, multi-blade, 45° torsion / long model

      The expensive long flute type for high hardness is offered at an affordable price
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      6 ～ 20Quenched and tempered steel[◎]26 ～ 766 ～ 8High HelicalTiAlN6 ～ 2070 ～ 140-
      Preço regular (excluindo IVA):
      46.60 €～
      Data de envio regular:
      5 dias úteis
      Configurar
    • SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated
      • Volume Discount

      OKAZAKI SEIKO

      SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated

      Unique blade type and OK hard coating enable high speed machining of high hardness materials up to 65 HRC.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      6 ～ 20Quenched and tempered steel[◎]15 ～ 456SquareFor High Hardness (Silicon Group)6 ～ 2050 ～ 105-
      Preço regular (excluindo IVA):
      90.77 €～
      Data de envio regular:
      10 dias úteis
      Configurar
    • One Cut 70 DV-SEH

        DIJET

        One Cut 70 DV-SEH

        Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
        Ler mais
        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
        8Quenched and tempered steel[○]206High Helical-875-
        Preço regular (excluindo IVA):
        116.71 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • One Cut 70 (with Fine Corner R) DV-SEHH-R02

          DIJET

          One Cut 70 (with Fine Corner R) DV-SEHH-R02

          Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
          Ler mais
          Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
          4Quenched and tempered steel[○]124High Helical-660-
          Preço regular (excluindo IVA):
          83.01 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • SPEED / T 3 Flute Anti-Vibration

            SPEED TIGER

            SPEED / T 3 Flute Anti-Vibration

            [Features]· High helical type with 3-flute blade ideal for grooving.· Supports high speed processing and large cutting depth with vibration prevention effects due to core thickness change.· P type T coat has a high thermal oxidation temperature and surface hardness, provides a long life, and has a wide range of compatible work materials.
            Ler mais
            Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
            3Quenched and tempered steel[○]83High Helical-450-
            Preço regular (excluindo IVA):
            17.18 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • SPEED / T 4 Flute Anti-Vibration High Border

              SPEED TIGER

              SPEED / T 4 Flute Anti-Vibration High Border

              [Features]· High helical type focusing on finishing with high speed processing and vibration prevention effects due to core thickness change.· P type T coat has a high thermal oxidation temperature and surface hardness, and provides a long life.· Can be used with a wide range of applicable cutting materials.· Focuses on usability with a long blade length of 30 mm and a blade diameter of ø10.
              Ler mais
              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              8 ～ 16Quenched and tempered steel[○]20 ～ 404High Helical-8 ～ 1660 ～ 100-
              Preço regular (excluindo IVA):
              49.41 €～
              Data de envio regular:
              7 dias úteis
              Configurar
            • Carbide 4-Flute High-Hardness End Mill 55° E168TX
              • Volume Discount

              7 LEADERS

              Carbide 4-Flute High-Hardness End Mill 55° E168TX

              [Features]· High performance 4-flute 55° high torsion end mill for machining high hardness materials with UMG carbide substrate.· Enables high-efficiency machining in side cutting of high-hardness materials (up to HRC 70).· Nanoparticle multilayer coating.· Suitable for machining high-hardness materials from HRC 45 to 70 due to high sheath harness and high initial oxidation temperature.· Suitable for a wide range of work materials from general steel to high hardness steel.
              Ler mais
              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              3 ～ 20Quenched and tempered steel[○]8 ～ 384High Helical-6 ～ 2050 ～ 100-
              Preço regular (excluindo IVA):
              55.21 €～
              Data de envio regular:
              8 dias úteis
              Configurar
            • GSX MILL VL Slot 2.5D GSXVLSLT3-2.5D
              • Volume Discount

              NACHI(FUJIKOSHI)

              GSX MILL VL Slot 2.5D GSXVLSLT3-2.5D

              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              5Quenched and tempered steel[○]12.53High HelicalFor General Steels (AlCrN, etc.)650-
              Preço regular (excluindo IVA):
              93.15 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • GSX MILL VL Hard 2.5D GSXVLH6-2.5D
              • Volume Discount

              NACHI(FUJIKOSHI)

              GSX MILL VL Hard 2.5D GSXVLH6-2.5D

              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              6 ～ 8Quenched and tempered steel[○]15 ～ 206High HelicalFor General Steels (AlCrN, etc.)6 ～ 850 ～ 60-
              Preço regular (excluindo IVA):
              115.79 €～
              Data de envio regular:
              6 dias úteis
              Configurar
            • Solid Carbide High Helix (45°) End Mill For High Hardnesses (4 Flutes), IC4HST

                THE CUT

                Solid Carbide High Helix (45°) End Mill For High Hardnesses (4 Flutes), IC4HST

                [Features]· Demonstrates excellent wear and heat resistance thanks to its special coating geared towards high hardness materials.· Capable of machining a wide range of workpieces from alloy steel to high hardness steel (HRC55 or lower.)· The 4 flutes and 45° torsion angle help reduce cutting resistance and provide a quality finished surface.
                Ler mais
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                6Quenched and tempered steel[○]154High HelicalTiAlN650-
                Preço regular (excluindo IVA):
                47.59 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Solid Carbide High Helix End Mill (6 Flutes) IC6HXE

                  THE CUT

                  Solid Carbide High Helix End Mill (6 Flutes) IC6HXE

                  [Features]· Outstanding cost performance.· The special coating improves wear resistance.· Also good for machining high hardness steel.· All sizes features 6 flutes.
                  Ler mais
                  Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                  6Quenched and tempered steel[○]156High Helical-660-
                  Preço regular (excluindo IVA):
                  61.97 €
                  Data de envio regular:
                  6 dias úteis
                  Configurar
              • 1

                • Produtos recentemente visualizados

                Categorias relacionadas com High Helical End Mills (Carbide)