Registar
Categoria
Ver mais
Condições de filtragem

Limpar tudo

  • Blade diameter (D)(φ)
  • work material
  • Blade length (ℓ)(mm)
    [5-45/1mm unidades]
  • Number of flutes(sheet)
  • Type
  • Coating
  • Fabricante

High Helical End Mills (Carbide) (work material: Stainless Steel)

    13 itens
    * Informações sobre dias de expedição, custos de expedição e preços
    Lista
    Foto
    Comparar especificações
  • 1
    • SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated
      • Volume Discount

      OKAZAKI SEIKO

      SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated

      Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      6 ～ 20Stainless Steel[○]15 ～ 456SquareFor High Hardness (Silicon Group)6 ～ 2080 ～ 150-
      Preço regular (excluindo IVA):
      112.92 €～
      Data de envio regular:
      10 dias úteis
      Configurar
    • TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model
      • Volume Discount
      • TS
      • General Steel
      • Multi-Flutes （5 ~）
      • B (Stub)

      MISUMI

      TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model

      The high precision high helical end mill for shrink fit holder is ideal for side finishing
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 12Stainless Steel[◎]4.5 ～ 184 ～ 6High HelicalFor High Hardness (Silicon Group)6 ～ 1250 ～ 75-
      Preço regular (excluindo IVA):
      98.32 €～
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less)
      • Volume Discount
      • TS
      • General Steel
      • Multi-Flutes （5 ~）
      • R (Regular)

      MISUMI

      TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less)

      [Features] -Cutting edge runout accuracy within 5µm (compared to manufacturer's measurements), back taper within 5µm and shank diameter tolerance h5 standards are used, making it ideal for lateral surface machining that requires high precision using high quality tools with low quality variation-Designed with a blade shape that emphasises sharpness with positive blade and cutting edge sharpness corner, suitable for machining raw material such as carbon steel.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ～ 12Stainless Steel[◎]10 ～ 304 ～ 6High HelicalFor High Hardness (Silicon Group)6 ～ 1260 ～ 100-
      Preço regular (excluindo IVA):
      94.04 €～
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model
      • Volume Discount
      • TS
      • General Steel
      • Multi-Flutes （5 ~）
      • S (Short)

      MISUMI

      TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model

      [Features] When machining raw material, heat-treated steel, aluminium, etc., finishing standing walls for mould bottom (main mould), etc., they show their strength thanks to the positive rake angle, sharp corners of the bottom edge and strong bevel angle of 53°-High tool rigidity minimises tool tilt during side milling.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ～ 12Stainless Steel[◎]2 ～ 244 ～ 6High HelicalFor High Hardness (Silicon Group)6 ～ 1260 ～ 10017 ～ 70
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model
      • Volume Discount
      • TS
      • General Steel
      • Multi-Flutes （5 ~）
      • R (Regular)

      MISUMI

      TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model

      [Features] -When machining raw material, heat-treated steel, aluminium, etc., when finishing standing walls of the mould bottom (main mould), etc., they show their strength thanks to the positive rake angle, the sharp corners of the bottom edge and the strong bevel angle of 53°-High tool rigidity minimises tool tilt during side milling.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ～ 20Stainless Steel[◎]2.5 ～ 454 ～ 6High HelicalFor High Hardness (Silicon Group)6 ～ 2060 ～ 13020 ～ 92
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAC series carbide high-helical end mill, for high-hardness steel machining, multi-blade, 45° torsion / regular model
      • Volume Discount
      • TiAlN
      • High-Hardness Steel
      • Multi-Flutes （5 ~）

      MISUMI

      XAC series carbide high-helical end mill, for high-hardness steel machining, multi-blade, 45° torsion / regular model

      [Features] -Designed with a tool shape that increases rigidity for machining high hardness steels-Since it is designed with a large rake angle, it can also be used on machines where the cutting speed is not increased-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      6 ～ 25Stainless Steel[○]13 ～ 446 ～ 8High HelicalTiAlN6 ～ 2557 ～ 104-
      Preço regular (excluindo IVA):
      41.22 €～
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAC series carbide high-helical end mill for high-hardness steel machining, multi-blade, 45° torsion / long model
      • Volume Discount
      • TiAlN
      • High-Hardness Steel
      • Multi-Flutes （5 ~）

      MISUMI

      XAC series carbide high-helical end mill for high-hardness steel machining, multi-blade, 45° torsion / long model

      The expensive long flute type for high hardness is offered at an affordable price
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      6 ～ 20Stainless Steel[○]26 ～ 766 ～ 8High HelicalTiAlN6 ～ 2070 ～ 140-
      Preço regular (excluindo IVA):
      46.60 €～
      Data de envio regular:
      5 dias úteis
      Configurar
    • SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated
      • Volume Discount

      OKAZAKI SEIKO

      SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated

      Unique blade type and OK hard coating enable high speed machining of high hardness materials up to 65 HRC.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      6 ～ 20Stainless Steel[○]15 ～ 456SquareFor High Hardness (Silicon Group)6 ～ 2050 ～ 105-
      Preço regular (excluindo IVA):
      90.77 €～
      Data de envio regular:
      10 dias úteis
      Configurar
    • SPEED / T 3 Flute Anti-Vibration

        SPEED TIGER

        SPEED / T 3 Flute Anti-Vibration

        [Features]· High helical type with 3-flute blade ideal for grooving.· Supports high speed processing and large cutting depth with vibration prevention effects due to core thickness change.· P type T coat has a high thermal oxidation temperature and surface hardness, provides a long life, and has a wide range of compatible work materials.
        Ler mais
        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
        3Stainless Steel[○]83High Helical-450-
        Preço regular (excluindo IVA):
        17.18 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • SPEED / T 4 Flute Anti-Vibration High Border

          SPEED TIGER

          SPEED / T 4 Flute Anti-Vibration High Border

          [Features]· High helical type focusing on finishing with high speed processing and vibration prevention effects due to core thickness change.· P type T coat has a high thermal oxidation temperature and surface hardness, and provides a long life.· Can be used with a wide range of applicable cutting materials.· Focuses on usability with a long blade length of 30 mm and a blade diameter of ø10.
          Ler mais
          Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
          8 ～ 16Stainless Steel[○]20 ～ 404High Helical-8 ～ 1660 ～ 100-
          Preço regular (excluindo IVA):
          49.41 €～
          Data de envio regular:
          7 dias úteis
          Configurar
        • GSX MILL VL Slot 2.5D GSXVLSLT3-2.5D
          • Volume Discount

          NACHI(FUJIKOSHI)

          GSX MILL VL Slot 2.5D GSXVLSLT3-2.5D

          Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
          5Stainless Steel[○]12.53High HelicalFor General Steels (AlCrN, etc.)650-
          Preço regular (excluindo IVA):
          93.15 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Solid Carbide High Helix (45°) End Mill For High Hardnesses (4 Flutes), IC4HST

            THE CUT

            Solid Carbide High Helix (45°) End Mill For High Hardnesses (4 Flutes), IC4HST

            [Features]· Demonstrates excellent wear and heat resistance thanks to its special coating geared towards high hardness materials.· Capable of machining a wide range of workpieces from alloy steel to high hardness steel (HRC55 or lower.)· The 4 flutes and 45° torsion angle help reduce cutting resistance and provide a quality finished surface.
            Ler mais
            Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
            6Stainless Steel[○]154High HelicalTiAlN650-
            Preço regular (excluindo IVA):
            47.59 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • Solid Carbide High Helix End Mill (6 Flutes) IC6HXE

              THE CUT

              Solid Carbide High Helix End Mill (6 Flutes) IC6HXE

              [Features]· Outstanding cost performance.· The special coating improves wear resistance.· Also good for machining high hardness steel.· All sizes features 6 flutes.
              Ler mais
              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              6Stainless Steel[○]156High Helical-660-
              Preço regular (excluindo IVA):
              61.97 €
              Data de envio regular:
              6 dias úteis
              Configurar
          • 1

            • Categorias relacionadas com High Helical End Mills (Carbide)