Registar

Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Condições de filtragem

Limpar tudo

  • Estoque
  • Blade diameter (D)(φ)
  • work material
  • Blade length (ℓ)(mm)
    [4-75/1mm unidades]
  • Number of flutes(sheet)
  • Type
  • Coating
    • Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill
      • Non-Coated
      • General Steel

      MISUMI

      Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

      [Features] -Alteration cutter that can determine the corner chamfer size of carbide cutters in 0.1 mm steps-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2 ~ 20Copper[○]3 ~ 602 ~ 4SquareFor High Hardness (Silicon Group) / Non-Coated4 ~ 2040 ~ 130-
      Data de envio regular:
      7 dias úteis
      Configurar
    • Carbide Blade Neck Relief End Mill, 4-Flute / Short Model
      • General Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      Carbide Blade Neck Relief End Mill, 4-Flute / Short Model

      Blade relief type with a 4-flute structure
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      6 ~ 12Copper[○]-4SquareNon-Coated6 ~ 1245 ~ 75-
      Data de envio regular:
      7 dias úteis
      Configurar
    • Carbide Blade Neck Relief End Mill, 4-Flute / Regular Model
      • General Steel
      • 4 Flutes
      • R (Regular)

      MISUMI

      Carbide Blade Neck Relief End Mill, 4-Flute / Regular Model

      Blade relief type with a 4-flute structure
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      6 ~ 12Copper[○]-4SquareNon-Coated6 ~ 1260 ~ 85-
      Data de envio regular:
      7 dias úteis
      Configurar
    • Carbide Square End Mill for Aluminium Machining, 2-Flute / 2D Flute Length (Short) Model
      • Volume Discount
      • Non-Coated
      • Aluminum
      • 2 Flutes

      MISUMI

      Carbide Square End Mill for Aluminium Machining, 2-Flute / 2D Flute Length (Short) Model

      Aluminum processing end mills that have pursued the machined surface accuracy are available at ultra-low prices
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.5 ~ 20Copper[○]1 ~ 402SquareNon-Coated4 ~ 2040 ~ 110-
      Preço (excluindo IVA) a partir de:
      13.44 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • Carbide Square End Mill for Aluminium Machining, 2-Flute / 3D Flute Length (Regular) Model
      • Volume Discount
      • Non-Coated
      • Aluminum
      • 2 Flutes

      MISUMI

      Carbide Square End Mill for Aluminium Machining, 2-Flute / 3D Flute Length (Regular) Model

      Achieves standing-wall machining with high surface accuracy in a single shot! The flute length of 3 times the outer diameter is available at an ultra low price
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.5 ~ 20Copper[○]1.5 ~ 602SquareNon-Coated4 ~ 2040 ~ 130-
      Preço (excluindo IVA) a partir de:
      14.80 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • Carbide Square End Mill for Aluminium Machining, 2-Flute / 5D Flute Length (Extra Long) Model
      • Volume Discount
      • Non-Coated
      • Aluminum
      • 2 Flutes

      MISUMI

      Carbide Square End Mill for Aluminium Machining, 2-Flute / 5D Flute Length (Extra Long) Model

      Achieves standing-wall machining with high surface accuracy in a single shot! The flute length of 5 times the outer diameter is available at an ultra low price
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ~ 12Copper[○]15 ~ 602SquareNon-Coated6 ~ 1260 ~ 130-
      Preço (excluindo IVA) a partir de:
      32.63 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model
      • Volume Discount

      MISUMI

      XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model

      The long-awaited long-neck type joins the popular XAL Series
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.1 ~ 6Copper[◎]0.2 ~ 92Long-Neck SquareFor General Steels (AlCrN, etc.)4 ~ 650 ~ 1000.3 ~ 60
      Preço (excluindo IVA) a partir de:
      10.81 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model
      • Volume Discount

      MISUMI

      XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model

      The price that's only achievable by XAL Series! Introducing the 4-flute long neck
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 6Copper[◎]1.5 ~ 94Long-Neck SquareFor General Steels (AlCrN, etc.)4 ~ 650 ~ 1004 ~ 50
      Preço (excluindo IVA) a partir de:
      16.93 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model
      • Volume Discount

      MISUMI

      XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model

      Introducing a regular type with 45° spiral in the popular XAL Series
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 12Copper[◎]4 ~ 484SquareFor General Steels (AlCrN, etc.)4 ~ 1245 ~ 105-
      Preço (excluindo IVA) a partir de:
      23.28 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC Series Carbide Uneven Lead 4-Flute Square End Mill
      • Volume Discount

      MISUMI

      TSC Series Carbide Uneven Lead 4-Flute Square End Mill

      The long-awaited unequal lead 4-flute square end mill is introduced in the TSC Series (helix angle of 40° / 43°)
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2 ~ 25Copper[○]4 ~ 504SquareFor High Hardness (Silicon Group)6 ~ 2550 ~ 120-
      Preço (excluindo IVA) a partir de:
      47.37 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)
      • Volume Discount

      MISUMI

      VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)-Effective for machining deep parts due to extra-long blade length-Ultra-fine-grained carbide base material and coating with excellent adhesion and heat resistance are used-Can machine heat-treated steel up to 50HRC-. Optimal for machining in low to medium rotation range due to universal 30° helix angle-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 20Copper[○]4 ~ 802Square-6 ~ 2060 ~ 200-
      Preço (excluindo IVA) a partir de:
      35.10 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • VAC Series Carbide Roughing End Mill
      • Volume Discount

      MISUMI

      VAC Series Carbide Roughing End Mill

      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ~ 12Copper[○]8 ~ 303 ~ 4Roughing-6 ~ 1250 ~ 80-
      Preço (excluindo IVA) a partir de:
      43.47 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • VAC Series Carbide 2-Flute Long Neck Square End Mill
      • Volume Discount

      MISUMI

      VAC Series Carbide 2-Flute Long Neck Square End Mill

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)-Effective for deep cutting due to long neck type-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can machine heat-treated steel up to 50HRC-. Optimal for machining in low to medium rotation range due to general 30° helix angle-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.2 ~ 12Copper[○]0.3 ~ 202Long-Neck Square-4 ~ 1240 ~ 1100.5 ~ 50
      Preço (excluindo IVA) a partir de:
      22.26 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)
      • Volume Discount

      MISUMI

      VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)-Effective for machining deep parts due to extra long blade length-Ultra-fine-grained carbide base material and coating with excellent adhesion and heat resistance are used-Can machine heat-treated steel up to 50HRC-. Optimal for machining in low to medium rotation range due to universal 30° helix angle-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1.5 ~ 25Copper[○]6 ~ 1204Square-4 ~ 2560 ~ 250-
      Preço (excluindo IVA) a partir de:
      38.08 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • VAC Series Carbide 2-Flute Square End Mill
      • Volume Discount

      MISUMI

      VAC Series Carbide 2-Flute Square End Mill

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)-All-purpose blade with regular 2-blade length-Ultra-fine carbide base material and coating with excellent adhesion and heat resistance are used-Can machine heat-treated steel up to 50HRC-. Optimal for machining in low to medium rotation range due to general purpose helix angle of 30°-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.3 ~ 20Copper[○]0.6 ~ 452Square-4 ~ 2040 ~ 100-
      Preço (excluindo IVA) a partir de:
      16.19 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)
      • Volume Discount

      MISUMI

      VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)

      [Features] -The chatter is suppressed by uneven pitches and uneven flutes. Stable machining with consistent surface accuracy is possible-It uses an ultra-fine grain carbide base material. The coating with excellent adhesion and heat resistance enables machining under high-speed conditions-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ~ 20Copper[○]7 ~ 264Square-6 ~ 2054 ~ 92-
      Preço (excluindo IVA) a partir de:
      18.33 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • DLC Mill Long Sharp Corner, 2-Flute SL2DLCSC
      • Volume Discount

      NACHI(FUJIKOSHI)

      DLC Mill Long Sharp Corner, 2-Flute SL2DLCSC

      An aluminum-use end mill suited for deep grooving, grooving at depth, or wide area side surface processing.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3 ~ 5Copper[○]12 ~ 202SquareDLC650 ~ 60-
      Preço (excluindo IVA) a partir de:
      76.47 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • DLC Mill for Aluminium 2DLCM
      • Volume Discount

      NACHI(FUJIKOSHI)

      DLC Mill for Aluminium 2DLCM

      End-mill for aluminum, copper alloy. Dry processing of aluminum is possible.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1.5 ~ 2Copper[○]4 ~ 62SquareDLC440-
      Preço (excluindo IVA) a partir de:
      51.95 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • Long Neck for Copper Work, 2-Flute CURIB
      • Volume Discount

      NACHI(FUJIKOSHI)

      Long Neck for Copper Work, 2-Flute CURIB

      Well suited for detailed machining on copper electrodes. Suited for aluminum as well. A variety of size alignment allows for multiple types of machining.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2Copper[◎]32Long-Neck SquareCrN45012
      Preço (excluindo IVA) a partir de:
      60.15 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • DLC Mill, Sharp Corner, 2-Flute 2DLCSC
      • Volume Discount

      NACHI(FUJIKOSHI)

      DLC Mill, Sharp Corner, 2-Flute 2DLCSC

      End-mill for aluminum, copper alloy. Adopts a sharp corner.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      8Copper[○]192SquareDLC860-
      Preço (excluindo IVA) a partir de:
      94.79 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • DLC Mill Slot Long Shank DLCSLTLS
      • Volume Discount

      NACHI(FUJIKOSHI)

      DLC Mill Slot Long Shank DLCSLTLS

      Continuous high efficiency processing from drilling to groove cutting of aluminum alloy is possible. Suitable for deep carving processing.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2 ~ 10Copper[○]3 ~ 153SquareDLC4 ~ 1050 ~ 1008 ~ 42
      Preço (excluindo IVA) a partir de:
      79.57 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • GSX MILL Roughing 2.5D GSXRE-2.5D
      • Volume Discount

      NACHI(FUJIKOSHI)

      GSX MILL Roughing 2.5D GSXRE-2.5D

      Fracture resistance during high-speed, high efficiency machining has been increased. Heat resistance and wear resistance has further improved due to GSX coating.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      12Copper[○]304RoughingFor General Steels (AlCrN, etc.)1275-
      Preço (excluindo IVA) a partir de:
      140.70 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • WXL-Coated 2-Flute 1.5D Flute Length Type WXL-1.5D-DE
      • Volume Discount

      OSG

      WXL-Coated 2-Flute 1.5D Flute Length Type WXL-1.5D-DE

      [Features]· 2-flute end mill coated with WXL hard lubricating film coating. Proven cutting performance on not only steel but also copper alloys. Recommended for both wet-type and dry-type milling.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.1 ~ 12Copper[◎]0.15 ~ 182SquareFor General Steels (AlCrN, etc.)4 ~ 1245 ~ 75-
      Preço (excluindo IVA) a partir de:
      25.40 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • 2-Flute 4D Type WXL-4D-DE
      • Volume Discount

      OSG

      2-Flute 4D Type WXL-4D-DE

      2-bladed end mill treated with the high hardness lubricating film WXL coat.ing Effective at grinding copper alloys in addition to steel. Recommended for both wet and dry machining.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.2 ~ 12Copper[◎]0.8 ~ 482SquareFor General Steels (AlCrN, etc.)4 ~ 1245 ~ 100-
      Preço (excluindo IVA) a partir de:
      39.70 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • 2-Flute, Extra Long, FX-MG-EXDL
      • Volume Discount

      OSG

      2-Flute, Extra Long, FX-MG-EXDL

      General-purpose 2-flute end-mill super long blade type with heat resistant FX coating.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      3Copper[○]202SquareTiAlN660-
      Preço (excluindo IVA) a partir de:
      67.46 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • 2-Flute, Extra Long, MG-EXDL

        OSG

        2-Flute, Extra Long, MG-EXDL

        A non-coated 2-flute extra long type.
        Ler mais
        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
        5Copper[○]402SquareNon-Coated680-
        Preço (excluindo IVA) a partir de:
        88.35 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • 2-Flute, Short, DIA-EDS

          OSG

          2-Flute, Short, DIA-EDS

          End mill, which was subjected to ultra-fine crystal diamond coating. Achieves outstanding tool life in high silicon aluminum alloy or graphite processing.
          Ler mais
          Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
          0.5 ~ 12Copper[○]1 ~ 262SquareDia Coat4 ~ 1240 ~ 75-
          Preço (excluindo IVA) a partir de:
          92.08 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • 2-Flute, Short, DLC-EDS
          • Volume Discount

          OSG

          2-Flute, Short, DLC-EDS

          End mill that has been subjected to its own ultra-smooth new DLC coating. Offers excellent performance with difficult to weld rolling aluminum alloy.
          Ler mais
          Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
          0.5 ~ 12Copper[○]1 ~ 242SquareDLC4 ~ 1240 ~ 75-
          Preço (excluindo IVA) a partir de:
          46.58 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • 2-Flute, Short, FX-EDS-6

            OSG

            2-Flute, Short, FX-EDS-6

            End Mill for high-speed machining that sufficiently exhibits the performance of high-speed, high-precision machining center.
            Ler mais
            Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
            0.2 ~ 2.5Copper[○]0.3 ~ 3.72SquareTiAlN6501.5 ~ 5
            Preço (excluindo IVA) a partir de:
            52.27 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • 2-Flute, Short, MG-EDS
            • Volume Discount

            OSG

            2-Flute, Short, MG-EDS

            Pin corner.
            Ler mais
            Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
            1.4 ~ 25Copper[○]4 ~ 452SquareNon-Coated4 ~ 2540 ~ 120-
            Preço (excluindo IVA) a partir de:
            35.95 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • 2-Flute, Short, WX-EDS
            • Volume Discount

            OSG

            2-Flute, Short, WX-EDS

            General-purpose type of 2 blade end mill that uses a high toughness cemented carbide with excellent stability to the base material. Supports a wide range of work materials and achieves reliable machining.
            Ler mais
            Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
            9 ~ 12Copper[○]19 ~ 262SquareTiAlN10 ~ 1270 ~ 75-
            Preço (excluindo IVA) a partir de:
            61.55 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • 2-Flute, Stub Shape, FX-MG-EDSS

              OSG

              2-Flute, Stub Shape, FX-MG-EDSS

              Ultra-short blade with blade length 1.5 times the blade diameter, Ideal for high-speed machining with high-speed machining center.
              Ler mais
              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              3 ~ 16Copper[○]4.5 ~ 242SquareTiAlN6 ~ 1650 ~ 100-
              Preço (excluindo IVA) a partir de:
              61.38 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • 2-Flute, Stub Shape (Gut Mill) WX-G-EDSS
              • Volume Discount

              OSG

              2-Flute, Stub Shape (Gut Mill) WX-G-EDSS

              Powerful 2-flute end-mill with reinforced base blade corner section. Heavy cutting is possible because of the short blade length high rigidity. Achieves reduction in lead-time during mass production processes.
              Ler mais
              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              5.5Copper[○]8.32SquareTiAlN650-
              Preço (excluindo IVA) a partir de:
              82.80 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • 2-Flute, Medium, MG-EDN

                OSG

                2-Flute, Medium, MG-EDN

                Pin corner.
                Ler mais
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                3.5 ~ 5Copper[○]12 ~ 172SquareNon-Coated650 ~ 60-
                Preço (excluindo IVA) a partir de:
                53.61 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • 2-Flute, Miniature, Short, MG-EDS-3
                • Volume Discount

                OSG

                2-Flute, Miniature, Short, MG-EDS-3

                Uses carbide alloy that increases in great intensity to Young's modulus.
                Ler mais
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                0.2 ~ 2Copper[○]0.6 ~ 62SquareNon-Coated340-
                Preço (excluindo IVA) a partir de:
                37.76 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • 2-Flute, Long FX-MG-EDL
                • Volume Discount

                OSG

                2-Flute, Long FX-MG-EDL

                General-purpose 2-flute end-mill long blade type with heat resistant FX coating.
                Ler mais
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                7 ~ 11Copper[○]24 ~ 342SquareTiAlN8 ~ 1270 ~ 90-
                Preço (excluindo IVA) a partir de:
                126.10 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • 2-Flute, Long MG-EDL
                • Volume Discount

                OSG

                2-Flute, Long MG-EDL

                Pin corner.
                Ler mais
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                13 ~ 25Copper[○]40 ~ 672SquareNon-Coated12 ~ 25100 ~ 140-
                Preço (excluindo IVA) a partir de:
                181.52 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • 2-Flute, for Steel / Aluminium Alloy / Plus Check (HSK Compatible) CRN-HS-EDS
                • Volume Discount

                OSG

                2-Flute, for Steel / Aluminium Alloy / Plus Check (HSK Compatible) CRN-HS-EDS

                A minimum tool protrusion amount can be set with 2-plane binding HSK holder. Suitable for high-speed mass production of copper electrodes.
                Ler mais
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                1 ~ 12Copper[◎]1.5 ~ 182SquareCrN6 ~ 1250 ~ 802.5 ~ 30
                Preço (excluindo IVA) a partir de:
                61.87 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • 2-Flute, Miniature Short for Steel / Aluminium Alloy / Plus Check

                  OSG

                  2-Flute, Miniature Short for Steel / Aluminium Alloy / Plus Check

                  Hightly lubricant CRN coating performs excellently on copper alloy, aluminum alloy, and plastic machining. Also perfectly suited for detail work on copper electrodes and copper alloy IT components.
                  Ler mais
                  Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                  0.5 ~ 3Copper[◎]1.5 ~ 82SquareCrN340-
                  Preço (excluindo IVA) a partir de:
                  46.68 €
                  Data de envio regular:
                  6 dias úteis
                  Configurar
                • 2-Flute, Long for Steel / Aluminium Alloy / Plus Check, CRN-EDL-4

                    OSG

                    2-Flute, Long for Steel / Aluminium Alloy / Plus Check, CRN-EDL-4

                    Hightly lubricant CRN coating performs excellently on copper alloy, aluminum alloy, and plastic machining. Produces a shiny, beautiful finished surface when used for copper electrode work.
                    Ler mais
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    1 ~ 3Copper[◎]4 ~ 152SquareCrN445 ~ 50-
                    Preço (excluindo IVA) a partir de:
                    60.65 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • 2-Flute, for Steel / Aluminium Alloy, Short, CA-RG-EDS
                    • Volume Discount

                    OSG

                    2-Flute, for Steel / Aluminium Alloy, Short, CA-RG-EDS

                    For copper, aluminum alloy. Well suited for finishing work on surfaces thanks to good cutting capabilities and a unique chatter preventing blade design.
                    Ler mais
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    4.5 ~ 10Copper[◎]11 ~ 222SquareNon-Coated6 ~ 1045 ~ 70-
                    Preço (excluindo IVA) a partir de:
                    76.20 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • 3-Flute, for Slotting, Stub Shape, WX-SHTSS
                    • Volume Discount

                    OSG

                    3-Flute, for Slotting, Stub Shape, WX-SHTSS

                    End mill is set to allow for continuous groove machining without prior thrust machining, all with a single piece. Makes it possible to reduce the number of magazine tools.
                    Ler mais
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    3 ~ 12Copper[○]4.5 ~ 183SquareTiAlN6 ~ 1250 ~ 75-
                    Preço (excluindo IVA) a partir de:
                    49.08 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • Corresponding Standing Wall Type for 3-Blade Steel / Aluminium Alloy CA-MFE
                    • Volume Discount

                    OSG

                    Corresponding Standing Wall Type for 3-Blade Steel / Aluminium Alloy CA-MFE

                    Provides a wide variety of cutter paths, among high precision, high efficiency standing-wall machining, such as helical processing, contouring, ramping. Due to a long, slim shank, over-hang length is freely adjusted.
                    Ler mais
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    10 ~ 12Copper[◎]15 ~ 183SquareNon-Coated8 ~ 10130 ~ 150-
                    Preço (excluindo IVA) a partir de:
                    100.21 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • 4-Flute, Extra Long, MG-EXML
                    • Volume Discount

                    OSG

                    4-Flute, Extra Long, MG-EXML

                    A non-coated 4-flute extra long type.
                    Ler mais
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    5 ~ 8Copper[○]504SquareNon-Coated6 ~ 1090 ~ 95-
                    Preço (excluindo IVA) a partir de:
                    108.75 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • 4-Flute, Short, FX-MG-EMS

                      OSG

                      4-Flute, Short, FX-MG-EMS

                      General-purpose 4-flute end-mill with heat resistant FX coating. Supports high-speed, high feed machining.
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      2 ~ 30Copper[○]6 ~ 454SquareFor General Steels (AlCrN, etc.)4 ~ 3240 ~ 125-
                      Preço (excluindo IVA) a partir de:
                      70.14 €
                      Data de envio regular:
                      6 dias úteis
                      Configurar