Registar

Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Condições de filtragem

Limpar tudo

  • Estoque
  • Blade diameter (D)(φ)
  • work material
  • Blade length (ℓ)(mm)
    [4-60/1mm unidades]
  • Number of flutes(sheet)
  • Type
  • Coating
    • TSC series carbide long neck square end mill, 2-flute / long neck model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes

      MISUMI

      TSC series carbide long neck square end mill, 2-flute / long neck model

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Can select the optimum body length for machining deep parts of the workpiece-Optimal for machining in the low to medium rotation range due to the universal 30° helix angle-It has a coating with high oxidation resistance and high hardness and achieves a long service life. Effective in high-speed machining and dry machining as coating characteristics.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.1 ~ 6General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.2 ~ 102Long-Neck SquareFor High Hardness (Silicon Group)4 ~ 640 ~ 1000.3 ~ 60
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAL series carbide square end mill, 2-flute / 3D Flute Length model
      • Volume Discount
      • XAL
      • General Steel
      • 2 Flutes

      MISUMI

      XAL series carbide square end mill, 2-flute / 3D Flute Length model

      The Misumi's unique lineup of fine flute length is available at attractive low prices
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]0.3 ~ 602SquareFor General Steels (AlCrN, etc.)3 ~ 2040 ~ 110-
      Preço (excluindo IVA) a partir de:
      9.61 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model

      [Features] -The cutter shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and quenched and tempered steel (up to 50 HRC)-All-purpose cutter with 4 cutting edges for a wide range of applications-Optimal for machining in the low to medium speed range due to the general-purpose helix angle of 30°-The coating shows high oxidation resistance and high hardness and achieves a long tool life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 604SquareFor High Hardness (Silicon Group)4 ~ 2045 ~ 13023 ~ 92
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide long neck square end mill, 4-flute / long neck model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes

      MISUMI

      TSC series carbide long neck square end mill, 4-flute / long neck model

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Can select optimum body length for machining deep parts of workpiece-Optimal for machining in low to medium turning range due to universal 30° helix angle-It has coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 6General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ~ 94Long-Neck SquareFor High Hardness (Silicon Group)4 ~ 650 ~ 1004 ~ 50
      Preço (excluindo IVA) a partir de:
      19.68 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • WXL-Coated 2-Flute 2D Flute Length Type WXL-2D-DE
      • DESCONTO
      • Volume Discount

      OSG

      WXL-Coated 2-Flute 2D Flute Length Type WXL-2D-DE

      [Features]· 2-flute end mill coated with WXL hard lubricating film coating. Proven cutting performance on not only steel but also copper alloys. Recommended for both wet-type and dry-type milling.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.1 ~ 30General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]0.2 ~ 602SquareFor General Steels (AlCrN, etc.)4 ~ 3245 ~ 140-
      Preço (excluindo IVA) a partir de:
      25.40 €
      Preço especial
      Data de envio regular:
      Item em stock: 1 dia útil
      Alguns artigos podem ser enviados no próprio dia
      Configurar
    • TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model

      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Regular 2-groove size that can be used for a wide range of applications-Optimal for low to medium speed machining due to the universal 30° helix angle-It is equipped with a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.2 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.6 ~ 602SquareFor High Hardness (Silicon Group)3 ~ 2040 ~ 13023 ~ 92
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model
      • Volume Discount
      • XAL
      • General Steel
      • 2 Flutes

      MISUMI

      XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model

      A long flute length type that supports deep engraving
      Ler mais
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.5 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]2 ~ 482SquareFor General Steels (AlCrN, etc.)4 ~ 1245 ~ 100-
      Preço (excluindo IVA) a partir de:
      12.36 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • C-CES2000 UT Coat, 2-Flute Square

        UNION TOOL

        C-CES2000 UT Coat, 2-Flute Square

        [Features]· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)· Reasonable price, yet high quality and high performance
        Ler mais
        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
        0.1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]0.15 ~ 482SquareTiCN3 ~ 2038 ~ 110-
        Preço (excluindo IVA) a partir de:
        25.90 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • GSX MILL 4-Flute Blade 2D GSX4C-2D
        • Volume Discount

        NACHI(FUJIKOSHI)

        GSX MILL 4-Flute Blade 2D GSX4C-2D

        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
        3 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]6 ~ 244SquareFor General Steels (AlCrN, etc.)6 ~ 1245 ~ 75-
        Preço (excluindo IVA) a partir de:
        34.14 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • CPR for Resin Processing, 2-Flute Long Neck Square
        • DESCONTO
        • Volume Discount

        UNION TOOL

        CPR for Resin Processing, 2-Flute Long Neck Square

        [Features]· Long Neck End Mill for Resin Processing· Ideal for deep grooving thanks to the undercut processing of the neck part
        Ler mais
        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
        0.5 ~ 6Aluminum[○] / Copper[◎] / Resin[◎]1 ~ 122Long-Neck SquareNon-Coated3 ~ 638 ~ 1202 ~ 63
        Preço (excluindo IVA) a partir de:
        34.04 €
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Champion Solid, End Mill NC-2
        • Volume Discount

        NS TOOL

        Champion Solid, End Mill NC-2

        General purpose type with 2x blade length
        Ler mais
        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
        0.5 ~ 6General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]1 ~ 122SquareNon-Coated3 ~ 635 ~ 55-
        Preço (excluindo IVA) a partir de:
        56.97 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Coated (TiAIN) Solid Carbide End Mills (4 Flutes) IC4SSV

          THE CUT

          Coated (TiAIN) Solid Carbide End Mills (4 Flutes) IC4SSV

          [Features]· Gash land· Outstanding cost performance.· Capable of machining a wide range of workpieces from raw materials up to alloy steel.· TiAlN coated for a longer tool life.
          Ler mais
          Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
          11General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○]304SquareTiAlN1275-
          Preço (excluindo IVA) a partir de:
          68.61 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model
          • Volume Discount
          • TS
          • General Steel
          • 2 Flutes
          • B (Stub)

          MISUMI

          TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model

          [Features] -Provides high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Suitable for high-speed machining with flute length 1.5 times the cutting edge diameter-Optimal for low to medium speed machining due to universal 30° helix angle-it has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
          Ler mais
          Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
          0.5 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.75 ~ 302SquareFor High Hardness (Silicon Group)4 ~ 2040 ~ 105-
          Preço (excluindo IVA) a partir de:
          13.35 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model
          • Volume Discount
          • Non-Coated
          • General Steel
          • 2 Flutes

          MISUMI

          Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model

          The blade diameter of 0.01 mm increments can be selected from the extensive variations of flute length
          Ler mais
          Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
          3.15 ~ 19.99General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3.5 ~ 482SquareNon-Coated6 ~ 2040 ~ 105-
          Preço (excluindo IVA) a partir de:
          34.57 €
          Data de envio regular:
          7 dias úteis
          Configurar
        • 2-Flute 3D Type WXL-3D-DE
          • DESCONTO
          • Volume Discount

          OSG

          2-Flute 3D Type WXL-3D-DE

          2-bladed end mill treated with the high hardness lubricating film WXL coat.ing Effective at grinding copper alloys in addition to steel. Recommended for both wet and dry machining.
          Ler mais
          Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
          0.1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]0.3 ~ 602SquareFor General Steels (AlCrN, etc.)4 ~ 2045 ~ 130-
          Preço (excluindo IVA) a partir de:
          25.40 €
          Preço especial
          Data de envio regular:
          Item em stock: 1 dia útil
          Alguns artigos podem ser enviados no próprio dia
          Configurar
        • 2-Flute, Short, FX-MG-EDS

            OSG

            2-Flute, Short, FX-MG-EDS

            General-purpose 2-flute end-mill with heat resistant FX coating. Supports a wide range of machining.
            Ler mais
            Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
            0.2 ~ 30General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]0.4 ~ 452SquareTiAlN3 ~ 3240 ~ 125-
            Preço (excluindo IVA) a partir de:
            52.27 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • 3-Flute, Short, DLC-ETS

              OSG

              3-Flute, Short, DLC-ETS

              Its own ultra-smooth new DLC coating prevents welding. Achieves high-speed high-efficiency machining in aircraft aluminum parts.
              Ler mais
              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              5 ~ 12Aluminum[◎] / Copper[○] / Resin[○]13 ~ 263SquareDLC6 ~ 1250 ~ 75-
              Preço (excluindo IVA) a partir de:
              62.31 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • 3-Flute, for Steel / Aluminium Alloy, Short, CA-ETS
              • Volume Discount

              OSG

              3-Flute, for Steel / Aluminium Alloy, Short, CA-ETS

              Great cutting sharpness and wide flutes that removes swarf swiftly contribute to fast, efficient grooving and side surface machining.
              Ler mais
              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              3 ~ 8Aluminum[◎] / Copper[◎] / Resin[○]8 ~ 193SquareNon-Coated6 ~ 850 ~ 60-
              Preço (excluindo IVA) a partir de:
              46.93 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • HLS, HM Coated 2-Flute Long Neck Square
              • DESCONTO
              • Volume Discount

              UNION TOOL

              HLS, HM Coated 2-Flute Long Neck Square

              [Features]· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity, enabling deep rib milling of high-hardness materials· High Accuracy: O.D. Tolerance: 0/-0.01 (D ≤ 0.15), 0/-0.015 (D ≥ 0.2)· The refined shape improves the fracture resistance and the synergistic effect with HARDMAX coating ensures long product life
              Ler mais
              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              0.1 ~ 6General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]0.1 ~ 92Long-Neck SquareFor High Hardness (Silicon Group)4 ~ 645 ~ 1200.3 ~ 60
              Preço (excluindo IVA) a partir de:
              48.05 €
              Preço especial
              Data de envio regular:
              Item em stock: 1 dia útil
              Alguns artigos podem ser enviados no próprio dia
              Configurar
            • C-CES4000S UT Coat, 4-Flute Square (Sharp Corner)

                UNION TOOL

                C-CES4000S UT Coat, 4-Flute Square (Sharp Corner)

                [Features]· C-CES: 4-flute sharp corner type· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)· Reasonable price, yet high quality and high performance
                Ler mais
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                1 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]2.5 ~ 264SquareTiCN4 ~ 1245 ~ 75-
                Preço (excluindo IVA) a partir de:
                46.70 €
                Data de envio regular:
                7 dias úteis
                Configurar
              • CPS for Resin Processing, 2-Flute Square

                  UNION TOOL

                  CPS for Resin Processing, 2-Flute Square

                  [Features]· Medium Blade Length End Mill for Resin Processing· Unique blade shape· Blade Length = 3x Outer Diameter (Some 1.5x/2x)· An excellent machined surface can be obtained, even for long resin protrusion machining
                  Ler mais
                  Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                  0.3 ~ 12Aluminum[○] / Copper[◎] / Resin[◎]0.9 ~ 362SquareNon-Coated3 ~ 1245 ~ 100-
                  Preço (excluindo IVA) a partir de:
                  44.80 €
                  Data de envio regular:
                  6 dias úteis
                  Configurar
                • CPRL for Resin Processing, 2-Flute Long Neck, Long Shank Square

                    UNION TOOL

                    CPRL for Resin Processing, 2-Flute Long Neck, Long Shank Square

                    [Features]· Long Neck / Long Shank Square End Mill for Resin Processing· Adopts a long shank to support deep groove machining of objects with long projections· Exhibits excellent sharpness in resin processing
                    Ler mais
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    0.5 ~ 4Aluminum[○] / Copper[◎] / Resin[◎]1 ~ 82Long-Neck SquareNon-Coated4 ~ 680 ~ 1004 ~ 40
                    Preço (excluindo IVA) a partir de:
                    63.62 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • NX-35 Lead 35 End Mill
                    • Volume Discount

                    NS TOOL

                    NX-35 Lead 35 End Mill

                    The blade length is 3x the blade diameter and the torsion angle is 35°. Features a slightly larger torsion angle than standard torsion and enables high efficiency machining
                    Ler mais
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    0.5 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]1.5 ~ 362SquareNon-Coated4 ~ 1240 ~ 85-
                    Preço (excluindo IVA) a partir de:
                    42.30 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing)
                    • DESCONTO
                    • Volume Discount

                    NS TOOL

                    MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing)

                    Infinity coating has been adopted for the original deep rib end mill. Neck relief type suitable for narrow deep processing.
                    Ler mais
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    0.1 ~ 6General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.15 ~ 92Long-Neck SquareTiAlN4 ~ 645 ~ 1200.3 ~ 60
                    Preço (excluindo IVA) a partir de:
                    26.72 €
                    Preço especial
                    Data de envio regular:
                    Item em stock: 1 dia útil
                    Alguns artigos podem ser enviados no próprio dia
                    Configurar
                  • MX230 MUGEN-COATING 2-Flute LEAD 30 End Mill
                    • Volume Discount

                    NS TOOL

                    MX230 MUGEN-COATING 2-Flute LEAD 30 End Mill

                    Standard type that can be used with versatility for grooves or sides
                    Ler mais
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    0.1 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.2 ~ 242SquareTiAlN4 ~ 1245 ~ 80-
                    Preço (excluindo IVA) a partir de:
                    17.54 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • SED2LA Long Square End Mill, 2-Flute, OK Coated
                    • Volume Discount

                    OKAZAKI SEIKO

                    SED2LA Long Square End Mill, 2-Flute, OK Coated

                    SED2LA, Long square end mill, 2-flute, OK coating-The long design enables milling of deep cavities-Sharp helix angle (45 to 60°).
                    Ler mais
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    3 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]15 ~ 802Long-Neck SquareTiAlN6 ~ 2070 ~ 150-
                    Preço (excluindo IVA) a partir de:
                    86.26 €
                    Data de envio regular:
                    10 dias úteis
                    Configurar
                  • SED2M Medium Square End Mill, 2-Flute, Non-Coated
                    • Volume Discount

                    OKAZAKI SEIKO

                    SED2M Medium Square End Mill, 2-Flute, Non-Coated

                    A 2-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
                    Ler mais
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    1 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4 ~ 362SquareNon-Coated4 ~ 1245 ~ 75-
                    Preço (excluindo IVA) a partir de:
                    33.40 €
                    Data de envio regular:
                    10 dias úteis
                    Configurar
                  • All Purpose Square End Mill Regular 3-Flute 3560
                    • Volume Discount

                    GUHRING

                    All Purpose Square End Mill Regular 3-Flute 3560

                    Machining is possible with a wide range of materials, from raw materials to hardened materials. Excellent cost performance. with the same price as 2-flute blades.
                    Ler mais
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    2 ~ 20--3Square-6 ~ 2057 ~ 104-
                    Preço (excluindo IVA) a partir de:
                    42.34 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • Carbide Center V End Mill (with Rounded Tip) KSVRA-2
                    • Volume Discount

                    KYOWA SEIKO

                    Carbide Center V End Mill (with Rounded Tip) KSVRA-2

                    [Features] A carbide end mill with 2 cutting edges, suitable for general steel, stainless steel and other workpieces.The R-shaped tip can be used for 3D machining and filleting.The high cutting speed and high production efficiency lead to a reduction in overall production costs.
                    Ler mais
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    1 ~ 6General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]2 ~ 122-TiAlN4 ~ 650 ~ 60-
                    Preço (excluindo IVA) a partir de:
                    107.74 €
                    Data de envio regular:
                    8 dias úteis
                    Configurar
                  • 3-Flute Long End Mill For Aluminium Alloys AERO-ETL

                      OSG

                      3-Flute Long End Mill For Aluminium Alloys AERO-ETL

                      [Features]· Maximizes the performance of high-power output machinery. · Ideal for high-efficiency machining of the large-type aluminum parts used in aircraft. · The sharp edges provide excellent cutting performance. (Thin film thickness of 1 μm)
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      12 ~ 20Aluminum[◎]50-SquareDLC12 ~ 20110-
                      Preço (excluindo IVA) a partir de:
                      178.80 €
                      Data de envio regular:
                      6 dias úteis
                      Configurar
                    • XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model
                      • Volume Discount
                      • XAL
                      • General Steel
                      • 2 Flutes

                      MISUMI

                      XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model

                      The price of the low-cost classic XAL Series has been further reduced!
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      0.1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]0.2 ~ 402SquareFor General Steels (AlCrN, etc.)3 ~ 2040 ~ 110-
                      Preço (excluindo IVA) a partir de:
                      9.33 €
                      Data de envio regular:
                      5 dias úteis
                      Configurar
                    • XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model
                      • Volume Discount
                      • XAL
                      • General Steel
                      • 4 Flutes

                      MISUMI

                      XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model

                      Popular XAL Series with the 4-flute structure that's ideal for side milling has been further reduced in price!
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]2 ~ 404SquareFor General Steels (AlCrN, etc.)4 ~ 2040 ~ 110-
                      Preço (excluindo IVA) a partir de:
                      10.86 €
                      Data de envio regular:
                      5 dias úteis
                      Configurar
                    • XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
                      • Volume Discount
                      • XAL
                      • General Steel
                      • 4 Flutes

                      MISUMI

                      XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model

                      The Misumi's original fine intermediate flute length is available at a reasonable price
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]3 ~ 604SquareFor General Steels (AlCrN, etc.)4 ~ 2045 ~ 130-
                      Preço (excluindo IVA) a partir de:
                      10.85 €
                      Data de envio regular:
                      5 dias úteis
                      Configurar
                    • XAC series carbide square end mill, 2-flute / short model
                      • Volume Discount
                      • TiAlN
                      • General Steel
                      • 2 Flutes
                      • S (Short)

                      MISUMI

                      XAC series carbide square end mill, 2-flute / short model

                      [Features] -Standard TiAlN Coating
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      1 ~ 20General Steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2.5 ~ 382SquareTiAlN4 ~ 2040 ~ 105-
                      Preço (excluindo IVA) a partir de:
                      13.92 €
                      Data de envio regular:
                      5 dias úteis
                      Configurar
                    • XAC series carbide square end mill, 4-flute / short model
                      • Volume Discount
                      • TiAlN
                      • General Steel
                      • 4 Flutes
                      • S (Short)

                      MISUMI

                      XAC series carbide square end mill, 4-flute / short model

                      [Features] -Standard TiAlN coating
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      2 ~ 20General Steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]6 ~ 384SquareTiAlN4 ~ 2040 ~ 105-
                      Preço (excluindo IVA) a partir de:
                      15.43 €
                      Data de envio regular:
                      5 dias úteis
                      Configurar
                    • XAC series carbide square end mill, 4-flute / long model
                      • Volume Discount
                      • TiAlN
                      • General Steel
                      • 4 Flutes
                      • L (Long)

                      MISUMI

                      XAC series carbide square end mill, 4-flute / long model

                      User friendly TiAlN coated series with long flute length
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      3 ~ 12General Steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]12 ~ 304SquareTiAlN6 ~ 1250 ~ 90-
                      Preço (excluindo IVA) a partir de:
                      29.70 €
                      Data de envio regular:
                      5 dias úteis
                      Configurar
                    • TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 2 Flutes
                      • B (Stub)

                      MISUMI

                      TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model

                      [Features] -The tool shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-The tool's rigidity is highlighted by shortening the flute length and overall length for shrink fit-Optimal for low to medium speed machining due to the universal 30° helix angle-The tool has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      0.5 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 122SquareFor High Hardness (Silicon Group)4 ~ 1240 ~ 65-
                      Preço (excluindo IVA) a partir de:
                      13.09 €
                      Data de envio regular:
                      5 dias úteis
                      Configurar
                    • TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 2 Flutes
                      • S (Short)

                      MISUMI

                      TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model

                      [Features] -Provides high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-All-purpose cutter with 2 cutting edges for a wide range of applications-Optimal for machining in the low to medium speed range due to the general-purpose helix angle of 30°-It has a coating with high oxidation resistance and high hardness and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      0.1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.2 ~ 402SquareFor High Hardness (Silicon Group)3 ~ 2035 ~ 11017 ~ 73
                      Data de envio regular:
                      5 dias úteis
                      Configurar
                    • TSC series carbide square end mill, 2-flute / 2.5D Flute Length model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 2 Flutes
                      • SR

                      MISUMI

                      TSC series carbide square end mill, 2-flute / 2.5D Flute Length model

                      The lineup of fine intermediate flute length between short and regular is available only in Misumi
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      0.5 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.25 ~ 302SquareFor High Hardness (Silicon Group)4 ~ 1245 ~ 8520 ~ 55
                      Data de envio regular:
                      5 dias úteis
                      Configurar
                    • TSC series carbide square end mill, 2-flute / 3.5D Flute Length model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 2 Flutes
                      • RL

                      MISUMI

                      TSC series carbide square end mill, 2-flute / 3.5D Flute Length model

                      Lineups of fine intermediate flute length between regular and long are available only in MISUMI.
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      0.5 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.75 ~ 422SquareFor High Hardness (Silicon Group)4 ~ 1245 ~ 9526 ~ 65
                      Data de envio regular:
                      5 dias úteis
                      Configurar
                    • TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 2 Flutes
                      • L (Long)

                      MISUMI

                      TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model

                      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)-The 4D flute length supports deep cavity milling-Optimal for low to medium rotation machining due to the universal 30° helix angle-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      1 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4 ~ 482SquareFor High Hardness (Silicon Group)4 ~ 1245 ~ 10029 ~ 76
                      Data de envio regular:
                      5 dias úteis
                      Configurar
                    • TSC series carbide square end mill for shrinkage fitting, 4-flute / 1D Flute Length (stub) model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 4 Flutes
                      • B (Stub)

                      MISUMI

                      TSC series carbide square end mill for shrinkage fitting, 4-flute / 1D Flute Length (stub) model

                      [Features] -The tool shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and quenched and tempered steel (up to 50 HRC)-The rigidity of the tool is emphasized by shortening the flute length and overall length for shrink fit-Optimal for low to medium speed machining due to the universal 30° helix angle-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      2 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ~ 124SquareFor High Hardness (Silicon Group)4 ~ 1240 ~ 65-
                      Preço (excluindo IVA) a partir de:
                      18.32 €
                      Data de envio regular:
                      5 dias úteis
                      Configurar
                    • TSC series carbide square end mill, 4-flute / 1.5D Flute Length (stub) model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 4 Flutes
                      • B (Stub)

                      MISUMI

                      TSC series carbide square end mill, 4-flute / 1.5D Flute Length (stub) model

                      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Suitable for high-speed machining with 1.5 times groove length-Optimal for low to medium speed machining due to universal 30° helix angle-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      2 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 184SquareFor High Hardness (Silicon Group)4 ~ 1240 ~ 75-
                      Preço (excluindo IVA) a partir de:
                      20.56 €
                      Data de envio regular:
                      5 dias úteis
                      Configurar
                    • TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 4 Flutes
                      • S (Short)

                      MISUMI

                      TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model

                      [Features] -The coating shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)-Optimal for low to medium speed machining due to universal 30° helix angle-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ~ 404SquareFor High Hardness (Silicon Group)4 ~ 2040 ~ 11015 ~ 73
                      Data de envio regular:
                      5 dias úteis
                      Configurar
                    • TSC series carbide square end mill, 4-flute / 2.5D Flute Length model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 4 Flutes
                      • SR

                      MISUMI

                      TSC series carbide square end mill, 4-flute / 2.5D Flute Length model

                      [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Slot length is 2.5 times the cutting edge diameter between short and regular flutes-Optimal for machining in low to medium rotation range due to universal 30° helix angle-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                      Ler mais
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      1 ~ 16General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2.5 ~ 404SquareFor High Hardness (Silicon Group)4 ~ 1645 ~ 10519 ~ 73
                      Data de envio regular:
                      5 dias úteis
                      Configurar