Carbide Ball End Mills（Machining Application：Engraving）

Search by sub-category

198

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 15 Days or Less 24 Days or Less

?* Information on days to ship and prices

1
2
3
4
5
Next >>

MSBH345 3-Flute Ball-End Mill for High-Hardness

NS TOOL

Enables high-efficiency machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	96.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model

MISUMI

[Features]
-High rigidity, 2 flute type with longitudinal taper
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	34.83 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL series carbide ball end mill, 2-flute / short model

MISUMI

XAL Series is the definitive choice for cost-sensitive customers

Volume Discount

XAL
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	13.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing ends 31/12/2024

HSB, HM Coated 2-Flute Ball

UNION TOOL

[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	37.04 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model

MISUMI

The user friendly regular flute length type is released simultaneously

Volume Discount

MR
General Steel
2 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	22.05 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Spherical Ball End FXS-EQD

OSG

Spherical cutting edge prevent chattering in the machining of standing wall. Machining undercut enabled.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	121.20 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 31/12/2024

MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)

NS TOOL

Long Neck Ball End Mill for Short Shank Type (supports shrink fit)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.37 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Carbide Solid Ball End Mill CSBE

EIKOSHA

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	103.57 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Single Cut Ball 70 End Mill DH-OCHB Type

DIJET

[Features]
· One mill for roughing to finishing high-hardness material.
· 4-blade solid ball end mill, capable of machining even 70 HRC hardness.
· Reduces chattering by using high tool rigidity and unequal divisions.
· Implements good cutting performance with low resistance, with a torsion angle of 45°.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	105.49 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

MISUMI

[Features]
-Designed with optimum blade length, shank length and overall length considering processing with shrink fit holder
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. High-precision tools with low quality variation are ideal for high-precision 3D machining of moulds
-Sampless shape (sharpening from the outer edge to the centre of the rounded blade in one process) is designed to produce a smooth cutting edge without steps.

Volume Discount

TS
General Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	64.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide long neck ball end mill, 2-flute / long neck model

MISUMI

[Features]
-Long neck shape suitable for deep cavity milling
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes

Select to compare

Configure now
Min. Shipping Days ：	5 Days

GS MILL Hard Ball GSBH

NACHI(FUJIKOSHI)

Suitable for high-speed finishing of high hardness material machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	112.06 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, FX-MG-EBD

OSG

Can work with materials ranging from general materials to quenched steel. Can also be compatible with high speed model machining centers.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	91.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Heavy Duty for Heavy Duty Cutting Ball End (HSK Compatible) FX-HS-EBDS

OSG

Ball end mill for heavy cutting that allows high-speed, high-efficiency (large depth of the cut) machining. Shrink-HSK Just Fit short overall length types.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	87.89 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, for Plus Check, Ball End CAP-EBD

OSG

Ball end mill for copper, aluminum alloy, and plastic. Good cutting properties and expels debris well.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	72.61 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

WXL-Coated 2-Flute Pencil Neck Ball End Type WXL-PC-EBD

OSG

[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	63.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT

OSG

Overturns old notions of deep engraving work with improved high efficiency machining. Unique spiral ball blade prevents vibrations during deep engraving and allows stable high feed cutting.

Select to compare

Configure now
Starting from^∗ ：	83.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

2-Flute Long Neck Ball End (Deep Rib Ball) WXL-LN-EBD

OSG

Displays effectiveness on a wide range of uses such as metal mold machining to copper electrode processing thanks to the effects of the high hardness lubricating film WXL coating.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	49.20 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MSB345 3-Flute Ball-End Mill

NS TOOL

Enables efficient machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	71.66 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SSB200 CBN Super Speed Ball End Mill

NS TOOL

High efficiency CBN ball end mill that combines CBN's long life and high precision with carbide's ease of use

Select to compare

Configure now
Starting from^∗ ：	160.01 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 31/12/2024

MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)

NS TOOL

Neck relief type suitable to narrow deep processing. Supports three-dimensional precision deep engraving from low to high speeds

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.61 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 31/12/2024

HM Coated 2-Flute, Long Neck Ball HSLB

UNION TOOL

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	28.03 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SSPB220 CBN Super Spiral Ball End Mill

NS TOOL

[Features]
· Spiral ball shape used to improve sharpness of cutting edge.
· The cutting edge shape used improves the chipping resistance of the cutting edge.
· When the peripheral cutting edge makes contact with the cutting surface, chatter vibration occurs due to an increase in cutting resistance and this affects tool life and cutting surface quality. (This effect can be reduced by using a strong back taper shape.)
Torsion angle: 20°

Select to compare

Configure now
Starting from^∗ ：	172.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Blade Sander Ball

WIDIN

[Features]
· Compatible with soft materials and aluminum alloys with a blade shape that emphasizes sharpness.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	34.19 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Carbide 2-Flute Short Ball End Mill 30° B222X

7 LEADERS

[Features]
· 2-flute short ball end mill that supports a wide range of work materials.
· Capable of continuous stable cutting.
· Nanoparticle multilayer coating.
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.21 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

TSC series carbide ball end mill (R accuracy ±3μm)

MISUMI

[Features]
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of moulds with high quality tools with low quality variation
-Seamless shape (sharpening from outer edge to centre of rounded blade in 1 process) is designed to create smooth cutting edge flank without steps.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	46.74 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

MISUMI

[Features]
-Compatible with shrink fit chucks for high precision machining
-Designed with short flute length and overall length for shrink fit and emphasis on rigidity
It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	24.07 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAC series carbide ball end mill, 2-flute / short model

MISUMI

[Features]
All-purpose ball nose end mill with 2 cutting edges for a wide range of profiling
-For rough machining of workpieces that are expected to have a good surface finish after machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

Volume Discount

TiAlN
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	23.03 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAC series carbide ball end mill, 2-flute / short, long shank model

MISUMI

[Features]
-Ideal for high precision 3D machining of moulds due to high tool rigidity and excellent chip evacuation
-For rough machining of the workpiece, a good surface finish can be expected after machining.
-Long shank type, ideal for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiAlN
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	44.96 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide ball end mill, short model

MISUMI

[Features]
-Good surface finish can be expected for the rough surface of the workpiece after machining
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, regular model

MISUMI

[Features]
-Regular bridge length allows for many regrinding times
-Can be regrinded. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 2-flute / short, long shank model

MISUMI

[Features]
-Long shank, ideal for deep cavity milling
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model

MISUMI

A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge

Volume Discount

TS
General Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 3-flute / short model

MISUMI

[Features]
-The 3-edge shape is resistant to chattering and enables high feed rate
-The surface of the workpiece is very well finished after machining.
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 3-flute / regular model

MISUMI

[Features]
-The 3-edge shape is chatter resistant and enables high feed
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, short model

MISUMI

[Features]
-The surface of the workpiece is very good after machining.
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 4-flute / regular model

MISUMI

[Features]
-The surface of the workpiece is very good after machining.
-It has coating with high oxidation resistance and high hardness, and achieves long service life. As a coating property, it is effective in high-speed machining and dry machining.
-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Carbide ball end mill, 2-flute / short model

MISUMI

Highly versatile due to the non-coated specification

Volume Discount

Non-Coated
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model

MISUMI

[Features]
-High feed, high rigidity 3-spiral taper shape with taper length
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.

Volume Discount

TS
General Steel
3 Flutes

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide long neck ball end mill, 3-flute / long neck model

MISUMI

[Features]
-Long-neck ball with 3 cutting edges, suitable for high-speed machining of deep cutting areas
-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide long neck ball end mill, 4-flute / long neck model

MISUMI

[Features]
-Long Neck Ball 4-Flute type suitable for high-feed machining of deep cutting areas
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

MISUMI

[Features]
-Ultra-fine-grained carbide base material suitable for machining high hardness steels is used (according to the manufacturer's cutting test results).
-MIAutomatic steelI-Original shape with rigid cutting edge treatment and no side cutting edge. High strength of the tool and cutting edge, resulting in a stable cutting edge shape and long tool life in high-speed milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	113.26 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

MISUMI

The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel

Volume Discount

TS
High-Hardness Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	64.27 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

MISUMI

[Features]
The shape with 3 flutes and short flute length prevents chatter and enables high feed machining
The tapered neck effectively suppresses chatter
Machining of high hardness steel up to 65HRC is possible
The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, pricing, etc.

Volume Discount

TS
High-Hardness Steel
3 Flutes

Select to compare

Configure now
Starting from^∗ ：	71.52 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model

MISUMI

Blade shape ball end mill that's suitable for work materials with low thermal conductivity such as the hard-to-cut SUS

Volume Discount

TS
SUS
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	103.49 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
R Size(mm)
Type
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Coating
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
R Precision(μm)
Machining Application

	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 31/12/2024	Select to compare	Select to compare	Select to compare Promotional pricing ends 31/12/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare Promotional pricing ends 31/12/2024	Select to compare Promotional pricing ends 31/12/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	NS TOOL	MISUMI	MISUMI	UNION TOOL	MISUMI	OSG	NS TOOL	EIKOSHA	DIJET	MISUMI	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	UNION TOOL	NS TOOL	WIDIN	7 LEADERS	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	MSBH345 3-Flute Ball-End Mill for High-Hardness	TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model	XAL series carbide ball end mill, 2-flute / short model	HSB, HM Coated 2-Flute Ball	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model	Spherical Ball End FXS-EQD	MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)	Carbide Solid Ball End Mill CSBE	Single Cut Ball 70 End Mill DH-OCHB Type	TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model	TSC series carbide long neck ball end mill, 2-flute / long neck model	GS MILL Hard Ball GSBH	2-Flute, Ball End, FX-MG-EBD	2-Flute Heavy Duty for Heavy Duty Cutting Ball End (HSK Compatible) FX-HS-EBDS	2-Flute, for Plus Check, Ball End CAP-EBD	WXL-Coated 2-Flute Pencil Neck Ball End Type WXL-PC-EBD	3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT	2-Flute Long Neck Ball End (Deep Rib Ball) WXL-LN-EBD	MSB345 3-Flute Ball-End Mill	SSB200 CBN Super Speed Ball End Mill	MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)	HM Coated 2-Flute, Long Neck Ball HSLB	SSPB220 CBN Super Spiral Ball End Mill	2-Blade Sander Ball	Carbide 2-Flute Short Ball End Mill 30° B222X	TSC series carbide ball end mill (R accuracy ±3μm)	TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model	XAC series carbide ball end mill, 2-flute / short model	XAC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, short model	TSC series carbide ball end mill, regular model	TSC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model	TSC series carbide ball end mill, 3-flute / short model	TSC series carbide ball end mill, 3-flute / regular model	TSC series carbide ball end mill, short model	TSC series carbide ball end mill, 4-flute / regular model	Carbide ball end mill, 2-flute / short model	TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model	TSC series carbide long neck ball end mill, 3-flute / long neck model	TSC series carbide long neck ball end mill, 4-flute / long neck model	TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade	TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model	TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model	TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model
Starting from^∗	96.47 € *Unit price with basic configuration Volume Discount	34.83 € *Unit price with basic configuration Volume Discount	13.95 € *Unit price with basic configuration Volume Discount	37.04 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 Volume Discount	22.05 € *Unit price with basic configuration Volume Discount	121.20 € *Unit price with basic configuration Volume Discount	36.37 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 Volume Discount	103.57 € *Unit price with basic configuration Volume Discount	105.49 € *Unit price with basic configuration Volume Discount	64.20 € *Unit price with basic configuration Volume Discount	- Volume Discount	112.06 € *Unit price with basic configuration Volume Discount	91.40 € *Unit price with basic configuration Volume Discount	87.89 € *Unit price with basic configuration Volume Discount	72.61 € *Unit price with basic configuration Volume Discount	63.80 € *Unit price with basic configuration Volume Discount	83.42 € *Unit price with basic configuration	49.20 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	71.66 € *Unit price with basic configuration Volume Discount	160.01 € *Unit price with basic configuration	31.61 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 Volume Discount	28.03 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 Volume Discount	172.90 € *Unit price with basic configuration	34.19 € *Unit price with basic configuration Volume Discount	24.21 € *Unit price with basic configuration Volume Discount	46.74 € *Unit price with basic configuration Volume Discount	24.07 € *Unit price with basic configuration Volume Discount	23.03 € *Unit price with basic configuration Volume Discount	44.96 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	113.26 € *Unit price with basic configuration Volume Discount	64.27 € *Unit price with basic configuration Volume Discount	71.52 € *Unit price with basic configuration Volume Discount	103.49 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	6 Days	5 Days	5 Days	Same day	5 Days	6 Days	Same day	6 Days	6 Days	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	Same day	Same day	6 Days	8 Days	8 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days
Specifications		TS General Steel 2 Flutes	XAL General Steel 2 Flutes	Stock	MR General Steel 2 Flutes R (Regular)					TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes											Stock				TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TiAlN General Steel 2 Flutes S (Short)	TiAlN General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes R (Regular)	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	Non-Coated General Steel 2 Flutes S (Short)	TS General Steel 3 Flutes	TS General Steel 3 Flutes	TS General Steel 4 Flutes	TS High-Hardness Steel 2 Flutes	TS High-Hardness Steel 2 Flutes B (Stub)	TS High-Hardness Steel 3 Flutes	TS SUS 2 Flutes S (Short)
R Size(mm)	0.5 ～ 3	0.15 ～ 5	0.05 ～ 10	0.03 ～ 6	0.2 ～ 8	0.5 ～ 6	0.1 ～ 1.5	0.4 ～ 20	-	0.3 ～ 2	0.05 ～ 3	0.2 ～ 6	0.5 ～ 15	0.5 ～ 6	0.5 ～ 10	0.1 ～ 6	0.5 ～ 6	0.05 ～ 3	0.5 ～ 6	0.1 ～ 1	0.05 ～ 3	0.05 ～ 3	0.1 ～ 3	R0.75 ～ R10	0.15 ～ 10	1.5 ～ 3	0.2 ～ 6	0.2 ～ 12.5	2 ～ 8	0.05 ～ 10	0.2 ～ 8	0.5 ～ 12.5	0.5 ～ 5	0.5 ～ 10	1 ～ 6	1 ～ 10	1.5 ～ 6	0.2 ～ 10	0.5 ～ 3	0.5 ～ 3	1 ～ 3	1 ～ 5	0.3 ～ 3	0.5 ～ 3	1 ～ 5
Type	Ball	Tapered neck ball	Ball	Ball	Ball	Spherical Ball	Long-Neck Ball	Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball / Spherical Ball	Ball	Ball	Ball	Ball	Ball	Tapered neck ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Tapered neck ball	Ball
work material	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○]
Blade length (ℓ)(mm)	1.5 ～ 10	0.3 ～ 8	0.2 ～ 38	0.06 ～ 22	1.5 ～ 30	0.7 ～ 8.1	0.15 ～ 2.5	3 ～ 70	7.5 ～ 9	0.6 ～ 4	0.07 ～ 8	0.4 ～ 12	2.5 ～ 55	1 ～ 12	2.5 ～ 38	0.16 ～ 12	1.5 ～ 18	0.08 ～ 6	1.5 ～ 20	0.15 ～ 1.2	0.07 ～ 6	0.08 ～ 4.8	0.15 ～ 3.6	4 ～ 38	0.6 ～ 38	4.5 ～ 9	0.4 ～ 12	0.8 ～ 50	8 ～ 30	0.2 ～ 25	1.5 ～ 30	2 ～ 30	-	2 ～ 25	5 ～ 22	3 ～ 25	5 ～ 22	0.8 ～ 25	0.8 ～ 6	0.8 ～ 4.8	1.6 ～ 6	1 ～ 5	0.6 ～ 6	0.8 ～ 4.8	3 ～ 15
Number of flutes(sheet)	3	2	2	2	2	2	2	2	4	2	2	2	2	2	2	2	3	2	3	2	2	2	2	2	2	2	2	2	2	2	2	2	2	3	3	4	4	2	3	2 ～ 3	4	2	2	3	2
Coating	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	MRC	TiAlN	TiAlN	-	Other	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	Non-Coated	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiAlN	Non-Coated	TiAlN	For High Hardness (Silicon Group)	Non-Coated	TiAlN	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)
Overall Length (L)(mm)	60 ～ 80	50 ～ 110	40 ～ 160	50 ～ 110	50 ～ 140	60 ～ 110	35 ～ 50	45 ～ 180	-	40	40 ～ 110	50 ～ 110	50 ～ 180	50 ～ 80	60 ～ 180	45 ～ 160	60 ～ 220	45 ～ 120	60 ～ 120	52 ～ 53	45 ～ 120	45 ～ 120	50 ～ 70	50 ～ 160	50 ～ 100	60 ～ 90	40 ～ 65	40 ～ 180	100 ～ 250	40 ～ 150	50 ～ 140	70 ～ 280	70 ～ 90	50 ～ 150	50 ～ 110	50 ～ 150	60 ～ 110	40 ～ 150	50 ～ 110	50 ～ 110	50 ～ 70	50 ～ 90	40	70 ～ 110	50 ～ 100
Underneck length (ℓ1)(mm)	-	1.5 ～ 60	-	-	-	5 ～ 60	0.5 ～ 20	-	24 ～ 36	-	0.2 ～ 60	0.6 ～ 7.5	-	2.5 ～ 30	-	1 ～ 80	6 ～ 160.8	0.3 ～ 50	-	0.3 ～ 5	0.3 ～ 50	0.3 ～ 60	0.3 ～ 18	-	-	-	-	-	-	15 ～ 75	17 ～ 80	15 ～ 80	4 ～ 55	15 ～ 75	17 ～ 72	15 ～ 75	17 ～ 72	-	7 ～ 60	3 ～ 50	4 ～ 30	5 ～ 10	-	20 ～ 50	-
Shank diameter (d)(mm)	6	4 ～ 12	3 ～ 20	4 ～ 12	4 ～ 16	6 ～ 12	4	4 ～ 32	-	6	3 ～ 8	4 ～ 12	4 ～ 25	6 ～ 12	4 ～ 20	4 ～ 16	6 ～ 20	3 ～ 6	6 ～ 12	4	4 ～ 6	3 ～ 6	4	3 ～ 20	4 ～ 20	6	4 ～ 12	3 ～ 25	4 ～ 16	3 ～ 20	4 ～ 16	3 ～ 25	6 ～ 10	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 12	3 ～ 20	4 ～ 8	4 ～ 6	4 ～ 6	6 ～ 10	6	4 ～ 8	6 ～ 10
R Precision(μm)	0.01～-0.01	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.01	-0.007～0.007 ～ -0.002～0.002	±0.005 ～ ±0.01	-	0.005～-0.005	±0.02	±8	±0.003	-0.007 ~ +0.003 ～ ±0.005	-	-0.01～+0.01	-0.015～+0.015 ～ -0.01	-0.01～+0.01	-0.005 to +0.005 ～ -0.005～+0.005	-	-0.005～+0.005	0.01～-0.01	0.005～-0.005 ～ 3 to -3	0.005～-0.005 ～ 0.01～-0.01	-0.005～0.005 ～ -0.002～0.002	0.05～-0.05 ～ 5 to -5	±0.01	±10	-0.005 ~ +0.001 ～ ±0.003	-0.007 ~ +0.003 ～ ±0.005	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	±0.01	-0.005 ~ +0.001 ～ ±0.003	-0.007 ~ +0.003 ～ ±0.005	±0.01
Machining Application	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving

1
2
3
4
5
Next >>

Filter by:

Stock

- Show only stock items
Clear

R Size(mm)
0.005

0.01

0.015

0.02

0.025

0.03

0.04

0.05

R0.05

0.075

0.1

R0.1

0.125

0.15

R0.15

0.175

0.2

R0.2

0.225

0.25

R0.25

0.275

0.3

R0.3

0.325

0.35

R0.35

0.375

0.4

R0.4

0.425

0.45

R0.45

0.475

0.5

R0.5

0.55

R0.55

0.6

R0.6

0.65

R0.65

0.7

R0.7

0.75

R0.75

0.8

R0.8

0.85

R0.85

0.9

R0.9

0.95

R0.95

1

R1

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

R1.75

1.8

1.85

1.9

1.95

2

R2

2.05

2.1

2.15

2.2

2.25

R2.25

2.3

2.35

2.4

2.45

2.5

R2.5

2.55

2.6

2.65

2.7

2.75

R2.75

2.8

2.85

2.9

2.95

3

R3

R 3.0

3.05

3.1

3.15

3.175

3.2

3.25

R3.25

3.3

3.35

3.4

3.45

3.5

R3.5

3.55

3.6

3.65

3.7

3.75

R3.75

3.8

3.85

3.9

3.95

4

R4

R 4.0

4.05

4.1

4.15

4.2

4.25

R4.25

4.3

4.35

4.4

4.45

4.5

R4.5

4.55

4.6

4.65

4.7

4.75

4.8

4.85

4.9

4.95

5

R5

5.05

5.1

5.15

5.2

5.25

5.3

5.35

5.4

5.45

5.5

R5.5

5.55

5.6

5.65

5.7

5.75

5.8

5.85

5.9

5.95

6

R6

6.05

6.1

6.15

6.2

6.25

6.3

6.35

6.4

6.45

6.5

6.55

6.6

6.65

6.7

6.75

6.8

6.85

6.9

6.95

7

R7

7.05

7.1

7.15

7.2

7.25

7.3

7.35

7.4

7.45

7.5

7.55

7.6

7.65

7.7

7.75

7.8

7.85

7.9

7.95

8

R8

8.05

8.1

8.15

8.2

8.25

8.3

8.35

8.4

8.45

8.5

8.55

8.6

8.65

8.7

8.75

8.8

8.85

8.9

8.95

9

R9

9..5

9.05

9.1

9.15

9.2

9.25

9.3

9.35

9.4

9.45

9.5

9.55

9.6

9.65

9.7

9.75

9.8

9.85

9.9

9.95

10

R10

10.25

10.5

10.75

11

11.5

12

12.25

12.5

12.75

13

13.5

14

14.5

15

15.5

16

16.5

17

17.5

18

18.5

19

19.5

20

22.0

22.5

23.0

24.0

25
Drawing

Clear

Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.01～0.96
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.1
  - 0.12
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.3
  - 0.32
  - 0.35
  - 0.38
  - 0.4
  - 0.45
  - 0.48
  - 0.5
  - 0.56
  - 0.6
  - 0.63
  - 0.64
  - 0.65
  - 0.7
  - 0.72
  - 0.75
  - 0.76
  - 0.8
  - 0.9
  - 0.95
  - 0.96
- 1～1.9
  - 1
  - 1.1
  - 1.12
  - 1.19
  - 1.2
  - 1.25
  - 1.26
  - 1.28
  - 1.3
  - 1.4
  - 1.42
  - 1.44
  - 1.45
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.39
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.75
  - 2.8
  - 2.85
  - 2.9
- 3～3.9
  - 3
  - 3.2
  - 3.25
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.81
  - 3.85
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.25
  - 4.4
  - 4.5
  - 4.7
  - 4.75
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.2
  - 6.25
  - 6.3
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.874
  - 7
  - 7.1
  - 7.2
  - 7.4
  - 7.5
  - 7.874
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.9
- 9～9.7
  - 9
  - 9.5
  - 9.7
- 10～10.8
  - 10
  - 10.5
  - 10.8
- 11～11.5
  - 11
  - 11.2
  - 11.278
  - 11.28
  - 11.3
  - 11.5
- 12～12.7
  - 12
  - 12.5
  - 12.7
- 13～13.5
  - 13
  - 13.5
- 14～14.5
  - 14
  - 14.199
  - 14.2
  - 14.4
  - 14.5
- 15
- 16～16.993
  - 16
  - 16.5
  - 16.99
  - 16.993
- 17～17.9
  - 17
  - 17.5
  - 17.9
- 18
- 19
- 20
- 21～21.5
  - 21
  - 21.5
- 22～22.682
  - 22
  - 22.3
  - 22.68
  - 22.682
- 23
- 24
- 25
- 26～26.9
  - 26
  - 26.9
- 27
- 28～28.6
  - 28
  - 28.296
  - 28.3
  - 28.6
- 29
- 30
- 31.6
- 32
- 33
- 34
- 35
- 36～36.5
  - 36
  - 36.5
- 38
- 40
- 44.6
- 45～45.49
  - 45
  - 45.49
- 48
- 50
- 55
- 58
- 60
- 65
- 70
- 80
- 90
- 100
- 110
- 120
- 130
[5-30/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
Details

Clear

Overall Length (L)(mm)
20

25

30

32

34

35

38

40

45

49

50

51

52

53

54

55

57

58

60

63

65

70

72

73

75

78

80

83

85

90

92

100

104

105

110

115

120

121

125

130

140

150

155

160

170

180

190

200

210

220

230

240

250

280

300

330

350
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.2～0.9
  - 0.2
  - 0.3
  - 0.45
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.8
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.75
  - 1.8
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.7
  - 2.75
  - 2.8
- 3～3.8
  - 3
  - 3.3
  - 3.5
  - 3.6
  - 3.75
  - 3.8
- 4～4.8
  - 4
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.8
  - 5
  - 5.2
  - 5.4
  - 5.5
  - 5.6
  - 5.8
- 6～6.5
  - 6
  - 6.5
- 7～7.8
  - 7
  - 7.5
  - 7.8
- 8～8.5
  - 8
  - 8.
  - 8.5
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13
- 14
- 15
- 16
- 17.5
- 18
- 20
- 21
- 22
- 23.1
- 24
- 25～25.6
  - 25
  - 25.6
- 26～26.8
  - 26
  - 26.8
- 27～27.6
  - 27
  - 27.6
- 28～28.7
  - 28
  - 28.7
- 30
- 31～31.6
  - 31
  - 31.5
  - 31.6
- 32～32.1
  - 32
  - 32.1
- 33～33.6
  - 33
  - 33.5
  - 33.6
- 34
- 35～35.6
  - 35
  - 35.5
  - 35.6
- 36～36.1
  - 36
  - 36.1
- 38～38.6
  - 38
  - 38.2
  - 38.6
- 39.5
- 40
- 41～41.4
  - 41
  - 41.2
  - 41.4
- 42～42.2
  - 42
  - 42.2
- 43～43.2
  - 43
  - 43.2
- 44～44.7
  - 44
  - 44.2
  - 44.7
- 45～45.2
  - 45
  - 45.2
- 46～46.7
  - 46
  - 46.5
  - 46.7
- 47.5
- 48～48.9
  - 48
  - 48.7
  - 48.9
- 49
- 50～50.7
  - 50
  - 50.7
- 52
- 54～54.5
  - 54
  - 54.5
- 57
- 58～58.5
  - 58
  - 58.5
- 60～60.8
  - 60
  - 60.3
  - 60.8
- 61～61.8
  - 61
  - 61.3
  - 61.8
- 62～62.5
  - 62
  - 62.3
  - 62.5
- 63.3
- 64.3
- 65
- 70
- 80～80.4
  - 80
  - 80.4
- 81.4
- 82.4
- 85
- 90～90.4
  - 90
  - 90.4
- 92.9
- 100
- 110
- 112
- 120～120.6
  - 120
  - 120.6
- 121.6
- 122.6
- 130
- 140
- 150
- 160
[4-80/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
2.90

3

3.80

4

4.80

5

5.80

6

7

7.80

7.94

8

9

9.52

9.70

10

11

11.70

12

12.7

14

15

15.70

15.88

16

18

19.05

20

25

25.4

30

30/32

31.75

32

38.1

40

42

50

50.8
Drawing

Clear

R Precision(μm)
-10～+10

-0.02 to 0.02

-0.015～+0.015

-0.01

-0.01 to 0.01

-0.01～0.01

-0.01～+0.01

-0.008～+0.008

-0.007 to 0.003

-0.007 ~ +0.003

-0.007～0.003

-0.007～+0.003

-0.007～0.007

-0.007～+0.007

-0.005 ~ +0.001

-0.005 to +0.005

-0.005～0.005

-0.005～+0.005

-0.003 to 0.003

-0.003～+0.003

-0.002～0.002

0～-50

0～-40

0～-0.04

0～-0.03

0 ～−0.02

0.002～-0.002

±0.003

0.003～-0.003

＋0.003～－0.003

±0.005

0.005～-0.005

＋0.005～－0.005

±0.01

0.01～-0.01

＋0.01～－0.01

±0.02

0.02～-0.02

0.05～-0.05

±0.07

±3

3 to -3

±5

5 to -5

5～-5

±8

±10

10～-10

20～-20
Clear