Carbide Ball End Mills（Machining Application：Engraving Page 3）

Search by sub-category

198

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 15 Days or Less 24 Days or Less

?* Information on days to ship and prices

2-Flute Pencil Neck, Ball End FX-PC-MG-EBD

OSG

Quality cutting is provided even in large protruding length, due to high rigidity pencil neck.

Select to compare

Configure now
Starting from^∗ ：	84.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Pencil Long Neck, Ball End FX-PCL-EBD

OSG

Ball end mill for deep engraving work that ordinary end mills can't reach.

Select to compare

Configure now
Starting from^∗ ：	239.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Long Shank Ball End (High-Efficacy) FXS-LS-EBT

OSG

In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.

Select to compare

Configure now
Starting from^∗ ：	104.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Pencil Neck, Ball End (High-Efficacy) FXS-PC-EBT

OSG

In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.

Select to compare

Configure now
Starting from^∗ ：	91.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Ball End (High-Efficacy) FXS-EBT

OSG

Allows high efficiency machining with up to 50% increased table feed due to the ball geometry formed by 3-blades to the center.

Select to compare

Configure now
Starting from^∗ ：	83.96 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Ball End, High-Cut High-Feed Type PHX-DBT

OSG

New concept ball end mill with a low-resistance blade tool shape for a large amount of cutting per blade. Can perform high-feed machining like never before.

Select to compare

Configure now
Starting from^∗ ：	84.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute, for Graphite, Ball End, DG-EBM

OSG

Diamond coating end-mill for graphite processing.

Select to compare

Configure now
Starting from^∗ ：	109.96 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 2 Flutes, Ball End, Long Type, GF-EBDL

OSG

Cemented carbide with superior abrasion resistance adopted as a base material, achieving long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	132.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 2 Flutes, Ball End Type, GF-EBDR

OSG

Cemented carbide with superior abrasion resistance adopted as a base material, achieving long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	108.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 2 Flutes, Long Shank, Ball End Type, D-GF-LS-EBDR

OSG

Diamond coating end-mill for aluminum processing. Promises wonderful elongation of tool life.

Select to compare

Configure now
Starting from^∗ ：	188.39 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 2 Flutes, Long Shank, Ball End Type, GF-LS-EBDR

OSG

Cemented carbide with superior abrasion resistance adopted as a base material, achieving long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	125.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spherical Ball End GX-EQD-SF

OSG

Ball end mills having spherical cutting tips developed for shrink fitting.

Select to compare

Configure now
Starting from^∗ ：	98.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Finishing 2 Flute Ball End (HSK Compatible) FX-H-EBD

OSG

Achieves stable cutting with not only HSK holders but also with L / D large shrink long arbors.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	83.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Long Neck for Plus Check, Ball End,CRN-LN-EBD

OSG

Ideal for copper electrode machining if large overhang is required due to short blade with high rigidity and long neck shape.

Select to compare

Configure now
Starting from^∗ ：	84.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Long Neck Ball End for 2-Flute Graphite

OSG

Diamond Coating End-mill for Graphite Processing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	107.25 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Neck, Ball End CBN-LN-SXB

OSG

2-Flute Long Neck Ball End Type CBN-LN-SXB
-Achieves deep cut milling even with small diameters. Good cutting quality.
With the effect of spiral cutting, both cutting edge strength and sharpness are achieved.
-CBN sintered body is used for flute material.

Select to compare

Configure now
Starting from^∗ ：	110.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Neck, Ball End CRN-LN-EBD-4

OSG

In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	64.79 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Neck, Ball End DLC-LN-EBD

OSG

Ultra-smooth DLC coating prevents welding. It is possible to achieve high-speed in the shape processing such as aluminum alloy, and good surface finishing can also be obtained.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	82.63 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Neck Ball End (Heavy Duty Type) WXL-HS-LN-EBD

OSG

WXL coating with excellent lubrication and abrasion resistance. Compatible With a Wide Range of Materials and Cutting Regions

Select to compare

Configure now
Starting from^∗ ：	20.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6

OSG

High-speed, high-accuracy, high-speed machining Long Neck Ball End Mill that sufficiently exhibits performance of the machining center.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	88.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD

OSG

Long neck ball which has been subjected to WX super coat of super-hard and ultra-heat-resistant. In accordance with the processing shape, freely effective length can be selected.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	57.40 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

2-Flute Long Neck Ball End (Deep Rib Ball) WX-LN-EBD

OSG

Long neck ball with choice of effective length according to machining form. High tenacity cemented carbide base material achieves a stable cutting in wide range of machining applications.

Select to compare

Configure now
Starting from^∗ ：	35.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Long Neck for 4-Flute Graphite, Ball Cord DG-LN-EBM

OSG

Diamond Coating End-mill for Graphite Processing

Select to compare

Configure now
Starting from^∗ ：	107.25 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

DIA Coated 2-Flute Long Neck, Ball End Mill DIA-LN-EBD

OSG

Ball end mill of the long neck shape that has been subjected to ultra-fine crystal diamond coating. Outstanding endurance in the graphite processing. Copper, is also effective in the aluminum alloy.

Select to compare

Configure now
Starting from^∗ ：	156.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)

UNION TOOL

[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	43.34 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

HBL, HM Coated 2-Flute Long Shank Ball

UNION TOOL

[Features]
· Long Shank Ball End Middle Series Supporting High-Hardness Materials
· Uses HardMax coating compatible with high-speed machining of high-hardness materials
· Capable of stable, long-life machining for both dry and wet type

Select to compare

Configure now
Starting from^∗ ：	110.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

HLB, HM Coated 2-Flute Long Neck Ball

UNION TOOL

[Features]
· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
· Provides unprecedented long life and can be used for both dry and wet applications

Select to compare

Configure now
Starting from^∗ ：	48.19 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

HTNB HM Coated High-Precision Taper Neck Ball

UNION TOOL

[Features]
· High rigidity realized through an improved taper neck shape.
· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity
· 65 HRC high hardness materials can also be cut

Select to compare

Configure now
Starting from^∗ ：	69.30 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

DCB 2-Flute Diamond-Coated Ball for Graphite Processing

UNION TOOL

[Features]
· 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing
· The newly developed diamond coating film achieves outstanding wear resistance
· Adopts a highly adhesive coating film for longer product life

Select to compare

Configure now
Starting from^∗ ：	277.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

DCLB 2-Flute Diamond-Coated Long Neck Ball for Graphite Processing

UNION TOOL

Select to compare

Configure now
Starting from^∗ ：	105.36 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

CGB2000 2-Flute Ball for Graphite Processing

UNION TOOL

[Features]
· An end mill dedicated for graphite machining.
· Adopts a carbide base material with excellent wear resistance.

Select to compare

Configure now
Starting from^∗ ：	115.16 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CGB4000 4-Flute Ball for Graphite Processing

UNION TOOL

[Features]
· An end mill dedicated for graphite machining.
· Adopts a carbide base material with excellent wear resistance.

Select to compare

Configure now
Starting from^∗ ：	228.98 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

CPRB for Resin Processing, 2-Flute Long Neck Ball

UNION TOOL

[Features]
· Long Neck Ball End Mill for Resin Processing
· Ideal for deep grooving thanks to the undercut processing of the neck part

Select to compare

Configure now
Starting from^∗ ：	72.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SSBL200 CBN Super Speed Long Neck Ball End Mill

NS TOOL

Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools

Select to compare

Configure now
Starting from^∗ ：	166.68 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SFB200 CBN Super Finish Ball End Mill

NS TOOL

The newly developed blade shape provides excellent sharpness through the radius center. Capable of finishing 60 HRC hardened steel for 10 continuous hours or more

Select to compare

Configure now
Starting from^∗ ：	200.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MACH225SF Short Shank, for High-Speed and High-Hardness Processing, Ball End Mill (for Thermal Insert)

NS TOOL

Short shank type (supports shrink fit). Ball end mill designed for high-speed and high-hardness machining

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	45.91 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

MRBH230 Long-Neck Ball, Hard (for High Hardness)

NS TOOL

The Infinity Coating Premium for high hardness and unique new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	32.56 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MSBH230 2-Flute Ball-End Mill for High-Hardness

NS TOOL

Standard type ball end mill for high hardness. Ideal for finishing

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	31.61 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining

NS TOOL

The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristics

Select to compare

Configure now
Starting from^∗ ：	239.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining

NS TOOL

World's smallest ball end mill "Micro Ball" extends the microfabrication area

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	76.47 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib)

NS TOOL

[Features]
Long shank cutter with 2 cutting edges.
[Features]
Suitable for machining aluminium alloys, copper and resins.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	95.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)

NS TOOL

Long Neck Ball End Mill for Short Shank Type (supports shrink fit)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	37.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

MSB230S MUGEN-COATING Short Ball End Mill

NS TOOL

The high-rigidity design enables high speed machining without chattering

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	43.04 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MSBL230 MUGEN-COATING Long Ball End Mill

NS TOOL

Machining utilizing the benefits of a long shank is possible

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	110.77 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill

NS TOOL

The tuned Infinity coating sustains high precision machining for a long time

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	58.31 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
R Size(mm)
Type
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Coating
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
R Precision(μm)
Machining Application

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL
Product Series	2-Flute Pencil Neck, Ball End FX-PC-MG-EBD	2-Flute Pencil Long Neck, Ball End FX-PCL-EBD	3-Flute Long Shank Ball End (High-Efficacy) FXS-LS-EBT	3-Flute Pencil Neck, Ball End (High-Efficacy) FXS-PC-EBT	3-Flute Ball End (High-Efficacy) FXS-EBT	3-Flute Ball End, High-Cut High-Feed Type PHX-DBT	4-Flute, for Graphite, Ball End, DG-EBM	For Graphite, 2 Flutes, Ball End, Long Type, GF-EBDL	For Graphite, 2 Flutes, Ball End Type, GF-EBDR	For Graphite, 2 Flutes, Long Shank, Ball End Type, D-GF-LS-EBDR	For Graphite, 2 Flutes, Long Shank, Ball End Type, GF-LS-EBDR	Spherical Ball End GX-EQD-SF	For Finishing 2 Flute Ball End (HSK Compatible) FX-H-EBD	2-Flute, Long Neck for Plus Check, Ball End,CRN-LN-EBD	Long Neck Ball End for 2-Flute Graphite	2-Flute Long Neck, Ball End CBN-LN-SXB	2-Flute Long Neck, Ball End CRN-LN-EBD-4	2-Flute Long Neck, Ball End DLC-LN-EBD	2-Flute Long Neck Ball End (Heavy Duty Type) WXL-HS-LN-EBD	2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6	2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD	2-Flute Long Neck Ball End (Deep Rib Ball) WX-LN-EBD	Long Neck for 4-Flute Graphite, Ball Cord DG-LN-EBM	DIA Coated 2-Flute Long Neck, Ball End Mill DIA-LN-EBD	HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)	HBL, HM Coated 2-Flute Long Shank Ball	HLB, HM Coated 2-Flute Long Neck Ball	HTNB HM Coated High-Precision Taper Neck Ball	DCB 2-Flute Diamond-Coated Ball for Graphite Processing	DCLB 2-Flute Diamond-Coated Long Neck Ball for Graphite Processing	CGB2000 2-Flute Ball for Graphite Processing	CGB4000 4-Flute Ball for Graphite Processing	CPRB for Resin Processing, 2-Flute Long Neck Ball	SSBL200 CBN Super Speed Long Neck Ball End Mill	SFB200 CBN Super Finish Ball End Mill	MACH225SF Short Shank, for High-Speed and High-Hardness Processing, Ball End Mill (for Thermal Insert)	MRBH230 Long-Neck Ball, Hard (for High Hardness)	MSBH230 2-Flute Ball-End Mill for High-Hardness	SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining	NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining	DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib)	MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)	MSB230S MUGEN-COATING Short Ball End Mill	MSBL230 MUGEN-COATING Long Ball End Mill	MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill
Starting from^∗	84.69 € *Unit price with basic configuration	239.02 € *Unit price with basic configuration	104.54 € *Unit price with basic configuration	91.00 € *Unit price with basic configuration	83.96 € *Unit price with basic configuration	84.50 € *Unit price with basic configuration	109.96 € *Unit price with basic configuration	132.60 € *Unit price with basic configuration	108.56 € *Unit price with basic configuration	188.39 € *Unit price with basic configuration	125.73 € *Unit price with basic configuration	98.58 € *Unit price with basic configuration	83.15 € *Unit price with basic configuration Volume Discount	84.00 € *Unit price with basic configuration	107.25 € *Unit price with basic configuration Volume Discount	110.50 € *Unit price with basic configuration	64.79 € *Unit price with basic configuration Volume Discount	82.63 € *Unit price with basic configuration Volume Discount	20.02 € *Unit price with basic configuration	88.82 € *Unit price with basic configuration Volume Discount	57.40 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	35.60 € *Unit price with basic configuration	107.25 € *Unit price with basic configuration	156.54 € *Unit price with basic configuration	43.34 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	110.99 € *Unit price with basic configuration	48.19 € *Unit price with basic configuration	69.30 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024	277.34 € *Unit price with basic configuration	105.36 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024	115.16 € *Unit price with basic configuration	228.98 € *Unit price with basic configuration	72.74 € *Unit price with basic configuration	166.68 € *Unit price with basic configuration	200.00 € *Unit price with basic configuration	45.91 € *Unit price with basic configuration Volume Discount	32.56 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	31.61 € *Unit price with basic configuration Volume Discount	239.99 € *Unit price with basic configuration	76.47 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	95.50 € *Unit price with basic configuration Volume Discount	37.33 € *Unit price with basic configuration Volume Discount	43.04 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	110.77 € *Unit price with basic configuration Volume Discount	58.31 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	Same day	6 Days	7 Days	Same day	6 Days	Same day	6 Days	7 Days	6 Days	6 Days	6 Days	6 Days	Same day	Same day	6 Days	Same day	6 Days	6 Days	Same day	6 Days	6 Days
Specifications																																					Stock	Stock
R Size(mm)	0.3 ～ 6	2 ～ 6	3 ～ 10	1 ～ 6	1 ～ 10	0.5 ～ 10	2 ～ 5	1 ～ 6	1 ～ 6	1 ～ 6	1 ～ 6	8 ～ 10	0.5 ～ 6	0.5 ～ 2.5	0.2 ～ 2	0.2 ～ 1.5	0.1 ～ 1	0.5 ～ 2	0.3 ～ 1.5	0.25 ～ 3	0.1 ～ 3	0.1 ～ 3	1 ～ 1.5	0.5 ～ 2.5	0.1 ～ 1	1.5 ～ 6	0.4 ～ 3	0.1 ～ 2	0.5 ～ 6	0.2 ～ 3	0.2 ～ 6	2 ～ 10	0.2 ～ 3	0.05 ～ 1	0.1 ～ 1	0.1 ～ 3	0.05 ～ 3	0.05 ～ 6	0.01 ～ 0.05	0.005 ～ 0.05	0.5 ～ 3	0.1 ～ 6	0.1 ～ 6	0.1 ～ 5	0.05 ～ 3
Type	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Spherical Ball	Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Tapered neck ball	Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball
work material	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○]	Aluminum[○] / Graphite[◎] / Resin[◎]	Graphite[◎]	Graphite[◎]	Graphite[◎]	Graphite[◎]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[○] / Copper[◎] / Resin[○]	Aluminum[○] / Graphite[◎] / Resin[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	Aluminum[○] / Copper[◎] / Resin[○]	Aluminum[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Graphite[◎] / Resin[◎]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[◎] / Resin[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]
Blade length (ℓ)(mm)	0.6 ～ 22	8 ～ 22	12 ～ 38	2 ～ 12	5 ～ 38	1.5 ～ 30	8 ～ 20	20 ～ 130	10 ～ 65	10 ～ 65	10 ～ 65	12 ～ 15	1 ～ 12	1.5 ～ 7.5	0.6 ～ 6	0.3 ～ 1.8	0.16 ～ 1.6	1.5 ～ 6	0.5 ～ 2.4	0.5 ～ 6	0.16 ～ 4.8	0.16 ～ 4.8	3 ～ 4.5	1.5 ～ 7.5	0.3 ～ 6	4.5 ～ 25	0.64 ～ 4.8	0.16 ～ 3.2	5 ～ 55	0.32 ～ 6	0.8 ～ 55	20 ～ 60	0.4 ～ 6	0.08 ～ 1.2	0.15 ～ 1.2	0.2 ～ 6	0.07 ～ 6	0.1 ～ 20	0.02 ～ 0.1	0.01 ～ 0.1	1.5 ～ 9	0.2 ～ 12	0.2 ～ 12	0.5 ～ 25	0.1 ～ 10
Number of flutes(sheet)	2	2	3	3	3	3	4	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	4	2	2	2	2	2	2	2	2	4	2	2	2	2	2	2	1	1	2	2	2	2	2
Coating	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	DG	Non-Coated	Non-Coated	Dia Coat	Non-Coated	For General Steels (AlCrN, etc.)	TiAlN	CrN	DG	Non-Coated	CrN	DLC	For General Steels (AlCrN, etc.)	TiAlN	For High Hardness (Silicon Group)	TiAlN	DG	Dia Coat	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Dia Coat	Dia Coat	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiAlN	TiAlN	TiAlN
Overall Length (L)(mm)	60 ～ 160	200 ～ 250	140 ～ 250	70 ～ 160	50 ～ 160	60 ～ 200	80 ～ 100	100 ～ 200	75 ～ 130	100 ～ 200	100 ～ 200	49 ～ 58	50 ～ 80	60 ～ 90	50 ～ 100	45 ～ 50	45 ～ 70	60 ～ 80	35 ～ 40	60 ～ 90	45 ～ 90	45 ～ 120	50 ～ 60	60 ～ 100	50 ～ 60	80 ～ 200	45 ～ 80	50 ～ 120	60 ～ 180	45 ～ 120	60 ～ 200	100 ～ 250	45 ～ 120	50 ～ 53	50 ～ 52	35 ～ 45	45 ～ 120	50 ～ 100	50	45	50 ～ 110	35 ～ 60	50 ～ 110	70 ～ 200	50 ～ 80
Underneck length (ℓ1)(mm)	10 ～ 80	100 ～ 140	-	20 ～ 85	-	-	-	25 ～ 80	20 ～ 85	25 ～ 130	25 ～ 130	-	2.5 ～ 30	3 ～ 40	4 ～ 60	2 ～ 15	1 ～ 30	5 ～ 20	1.5 ～ 12	2.5 ～ 30	0.5 ～ 40	0.5 ～ 50	10 ～ 20	5 ～ 50	-	-	3 ～ 30	1.5 ～ 62	-	2 ～ 80	-	-	1 ～ 50	0.3 ～ 10	0.5 ～ 5	0.5 ～ 15	0.2 ～ 50	-	-	-	4 ～ 50	-	-	-	-
Shank diameter (d)(mm)	6 ～ 16	10 ～ 16	6 ～ 20	6 ～ 16	4 ～ 20	6 ～ 20	4 ～ 10	6 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	10 ～ 12	6 ～ 12	6	4	4 ～ 6	4	6	4	6	4 ～ 6	4 ～ 6	4	6	4	3 ～ 12	4 ～ 6	4 ～ 6	4 ～ 12	4 ～ 6	4 ～ 12	4 ～ 20	4 ～ 6	4	4	4 ～ 6	4 ～ 6	4 ～ 12	4	4	4 ～ 8	4 ～ 12	4 ～ 12	3 ～ 10	4 ～ 6
R Precision(μm)	-0.01～0.01	-0.01～0.01	-0.015～+0.015	-0.015～+0.015	-0.015～+0.015	-0.01～+0.01	-0.015～+0.015	-	-	-	-	-0.01～+0.01	-0.01～+0.01	-0.01～+0.01	-0.01～+0.01 ～ -0.008～+0.008	-0.01～+0.01	-0.01～+0.01	-0.01～+0.01	-0.005～+0.005	-0.005～+0.005	-0.005～+0.005	-0.01～+0.01	-0.015～+0.015	-	-0.005～0.005	-0.007～0.007 ～ -0.005～0.005	-0.002～0.002	-0.005～0.005	-0.01～0.01	-0.01～0.01	-0.01～0.01	-0.01～0.01	-0.01～0.01	0.005～-0.005	0.003～-0.003 ～ 0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	-	0.002～-0.002	0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.01～-0.01	0.002～-0.002
Machining Application	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving	Engraving

Filter by:

Stock

- Show only stock items
Clear

R Size(mm)
0.005

0.01

0.015

0.02

0.025

0.03

0.04

0.05

R0.05

0.075

0.1

R0.1

0.125

0.15

R0.15

0.175

0.2

R0.2

0.225

0.25

R0.25

0.275

0.3

R0.3

0.325

0.35

R0.35

0.375

0.4

R0.4

0.425

0.45

R0.45

0.475

0.5

R0.5

0.55

R0.55

0.6

R0.6

0.65

R0.65

0.7

R0.7

0.75

R0.75

0.8

R0.8

0.85

R0.85

0.9

R0.9

0.95

R0.95

1

R1

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

R1.75

1.8

1.85

1.9

1.95

2

R2

2.05

2.1

2.15

2.2

2.25

R2.25

2.3

2.35

2.4

2.45

2.5

R2.5

2.55

2.6

2.65

2.7

2.75

R2.75

2.8

2.85

2.9

2.95

3

R3

R 3.0

3.05

3.1

3.15

3.175

3.2

3.25

R3.25

3.3

3.35

3.4

3.45

3.5

R3.5

3.55

3.6

3.65

3.7

3.75

R3.75

3.8

3.85

3.9

3.95

4

R4

R 4.0

4.05

4.1

4.15

4.2

4.25

R4.25

4.3

4.35

4.4

4.45

4.5

R4.5

4.55

4.6

4.65

4.7

4.75

4.8

4.85

4.9

4.95

5

R5

5.05

5.1

5.15

5.2

5.25

5.3

5.35

5.4

5.45

5.5

R5.5

5.55

5.6

5.65

5.7

5.75

5.8

5.85

5.9

5.95

6

R6

6.05

6.1

6.15

6.2

6.25

6.3

6.35

6.4

6.45

6.5

6.55

6.6

6.65

6.7

6.75

6.8

6.85

6.9

6.95

7

R7

7.05

7.1

7.15

7.2

7.25

7.3

7.35

7.4

7.45

7.5

7.55

7.6

7.65

7.7

7.75

7.8

7.85

7.9

7.95

8

R8

8.05

8.1

8.15

8.2

8.25

8.3

8.35

8.4

8.45

8.5

8.55

8.6

8.65

8.7

8.75

8.8

8.85

8.9

8.95

9

R9

9..5

9.05

9.1

9.15

9.2

9.25

9.3

9.35

9.4

9.45

9.5

9.55

9.6

9.65

9.7

9.75

9.8

9.85

9.9

9.95

10

R10

10.25

10.5

10.75

11

11.5

12

12.25

12.5

12.75

13

13.5

14

14.5

15

15.5

16

16.5

17

17.5

18

18.5

19

19.5

20

22.0

22.5

23.0

24.0

25
Drawing

Clear

Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.01～0.96
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.1
  - 0.12
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.3
  - 0.32
  - 0.35
  - 0.38
  - 0.4
  - 0.45
  - 0.48
  - 0.5
  - 0.56
  - 0.6
  - 0.63
  - 0.64
  - 0.65
  - 0.7
  - 0.72
  - 0.75
  - 0.76
  - 0.8
  - 0.9
  - 0.95
  - 0.96
- 1～1.9
  - 1
  - 1.1
  - 1.12
  - 1.19
  - 1.2
  - 1.25
  - 1.26
  - 1.28
  - 1.3
  - 1.4
  - 1.42
  - 1.44
  - 1.45
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.39
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.75
  - 2.8
  - 2.85
  - 2.9
- 3～3.9
  - 3
  - 3.2
  - 3.25
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.81
  - 3.85
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.25
  - 4.4
  - 4.5
  - 4.7
  - 4.75
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.2
  - 6.25
  - 6.3
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.874
  - 7
  - 7.1
  - 7.2
  - 7.4
  - 7.5
  - 7.874
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.9
- 9～9.7
  - 9
  - 9.5
  - 9.7
- 10～10.8
  - 10
  - 10.5
  - 10.8
- 11～11.5
  - 11
  - 11.2
  - 11.278
  - 11.28
  - 11.3
  - 11.5
- 12～12.7
  - 12
  - 12.5
  - 12.7
- 13～13.5
  - 13
  - 13.5
- 14～14.5
  - 14
  - 14.199
  - 14.2
  - 14.4
  - 14.5
- 15
- 16～16.993
  - 16
  - 16.5
  - 16.99
  - 16.993
- 17～17.9
  - 17
  - 17.5
  - 17.9
- 18
- 19
- 20
- 21～21.5
  - 21
  - 21.5
- 22～22.682
  - 22
  - 22.3
  - 22.68
  - 22.682
- 23
- 24
- 25
- 26～26.9
  - 26
  - 26.9
- 27
- 28～28.6
  - 28
  - 28.296
  - 28.3
  - 28.6
- 29
- 30
- 31.6
- 32
- 33
- 34
- 35
- 36～36.5
  - 36
  - 36.5
- 38
- 40
- 44.6
- 45～45.49
  - 45
  - 45.49
- 48
- 50
- 55
- 58
- 60
- 65
- 70
- 80
- 90
- 100
- 110
- 120
- 130
[5-30/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
Details

Clear

Overall Length (L)(mm)
20

25

30

32

34

35

38

40

45

49

50

51

52

53

54

55

57

58

60

63

65

70

72

73

75

78

80

83

85

90

92

100

104

105

110

115

120

121

125

130

140

150

155

160

170

180

190

200

210

220

230

240

250

280

300

330

350
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.2～0.9
  - 0.2
  - 0.3
  - 0.45
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.8
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.75
  - 1.8
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.7
  - 2.75
  - 2.8
- 3～3.8
  - 3
  - 3.3
  - 3.5
  - 3.6
  - 3.75
  - 3.8
- 4～4.8
  - 4
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.8
  - 5
  - 5.2
  - 5.4
  - 5.5
  - 5.6
  - 5.8
- 6～6.5
  - 6
  - 6.5
- 7～7.8
  - 7
  - 7.5
  - 7.8
- 8～8.5
  - 8
  - 8.
  - 8.5
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13
- 14
- 15
- 16
- 17.5
- 18
- 20
- 21
- 22
- 23.1
- 24
- 25～25.6
  - 25
  - 25.6
- 26～26.8
  - 26
  - 26.8
- 27～27.6
  - 27
  - 27.6
- 28～28.7
  - 28
  - 28.7
- 30
- 31～31.6
  - 31
  - 31.5
  - 31.6
- 32～32.1
  - 32
  - 32.1
- 33～33.6
  - 33
  - 33.5
  - 33.6
- 34
- 35～35.6
  - 35
  - 35.5
  - 35.6
- 36～36.1
  - 36
  - 36.1
- 38～38.6
  - 38
  - 38.2
  - 38.6
- 39.5
- 40
- 41～41.4
  - 41
  - 41.2
  - 41.4
- 42～42.2
  - 42
  - 42.2
- 43～43.2
  - 43
  - 43.2
- 44～44.7
  - 44
  - 44.2
  - 44.7
- 45～45.2
  - 45
  - 45.2
- 46～46.7
  - 46
  - 46.5
  - 46.7
- 47.5
- 48～48.9
  - 48
  - 48.7
  - 48.9
- 49
- 50～50.7
  - 50
  - 50.7
- 52
- 54～54.5
  - 54
  - 54.5
- 57
- 58～58.5
  - 58
  - 58.5
- 60～60.8
  - 60
  - 60.3
  - 60.8
- 61～61.8
  - 61
  - 61.3
  - 61.8
- 62～62.5
  - 62
  - 62.3
  - 62.5
- 63.3
- 64.3
- 65
- 70
- 80～80.4
  - 80
  - 80.4
- 81.4
- 82.4
- 85
- 90～90.4
  - 90
  - 90.4
- 92.9
- 100
- 110
- 112
- 120～120.6
  - 120
  - 120.6
- 121.6
- 122.6
- 130
- 140
- 150
- 160
[4-80/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
2.90

3

3.80

4

4.80

5

5.80

6

7

7.80

7.94

8

9

9.52

9.70

10

11

11.70

12

12.7

14

15

15.70

15.88

16

18

19.05

20

25

25.4

30

30/32

31.75

32

38.1

40

42

50

50.8
Drawing

Clear

R Precision(μm)
-10～+10

-0.02 to 0.02

-0.015～+0.015

-0.01

-0.01 to 0.01

-0.01～0.01

-0.01～+0.01

-0.008～+0.008

-0.007 to 0.003

-0.007 ~ +0.003

-0.007～0.003

-0.007～+0.003

-0.007～0.007

-0.007～+0.007

-0.005 ~ +0.001

-0.005 to +0.005

-0.005～0.005

-0.005～+0.005

-0.003 to 0.003

-0.003～+0.003

-0.002～0.002

0～-50

0～-40

0～-0.04

0～-0.03

0 ～−0.02

0.002～-0.002

±0.003

0.003～-0.003

＋0.003～－0.003

±0.005

0.005～-0.005

＋0.005～－0.005

±0.01

0.01～-0.01

＋0.01～－0.01

±0.02

0.02～-0.02

0.05～-0.05

±0.07

±3

3 to -3

±5

5 to -5

5～-5

±8

±10

10～-10

20～-20
Clear