Registar

Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Condições de filtragem

Limpar tudo

  • Estoque
  • R Size(mm)
  • Type
  • work material
  • Blade length (ℓ)(mm)
    [5-30/1mm unidades]
  • Number of flutes(sheet)
  • Coating
    • HSB, HM Coated 2-Flute Ball
      • DESCONTO
      • Volume Discount
      • Stock

      UNION TOOL

      HSB, HM Coated 2-Flute Ball

      [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
      Ler mais
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.03 ~ 6BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]0.06 ~ 222For High Hardness (Silicon Group)50 ~ 110-4 ~ 12
      Preço (excluindo IVA) a partir de:
      37.04 €
      Preço especial
      Data de envio regular:
      Item em stock: 1 dia útil
      Alguns artigos podem ser enviados no próprio dia
      Configurar
    • SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining

        NS TOOL

        SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining

        The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristics
        Ler mais
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.01 ~ 0.05BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○]0.02 ~ 0.11Non-Coated50-4
        Preço (excluindo IVA) a partir de:
        230.71 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • 2-Flute, Ball End, Miniature, CRN-EBD-3

          OSG

          2-Flute, Ball End, Miniature, CRN-EBD-3

          A series of bore-end small diameter radius mills with CRN coating to improve lubricity.. Well suited for detail work on copper electrodes and IT components.
          Ler mais
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.1 ~ 1.5BallAluminum[○] / Copper[◎] / Resin[◎]0.4 ~ 82CrN40-3
          Preço (excluindo IVA) a partir de:
          69.89 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Carbide Air Hole Ball End Mill 4-Flute, Standard Type
          • Volume Discount

          EIKOSHA

          Carbide Air Hole Ball End Mill 4-Flute, Standard Type

          Graphite Electrode Processing With Air Hole
          Ler mais
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          2 ~ 12.5BallGeneral Steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]20 ~ 604-70 ~ 180-6 ~ 25
          Preço (excluindo IVA) a partir de:
          112.06 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Small Diameter Ball End Mill, 2-Flute
          • Volume Discount

          ATOM

          Small Diameter Ball End Mill, 2-Flute

          Good surface roughness of the cutting edge realizes high quality finished surface.
          Ler mais
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.05 ~ 0.475BallGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]0.2 ~ 2.52Non-Coated40-3
          Preço (excluindo IVA) a partir de:
          77.59 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • 2-Blade Sander Ball
          • Volume Discount

          WIDIN

          2-Blade Sander Ball

          [Features]· Compatible with soft materials and aluminum alloys with a blade shape that emphasizes sharpness.
          Ler mais
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          R0.75 ~ R10BallGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]4 ~ 382TiAlN50 ~ 160-3 ~ 20
          Preço (excluindo IVA) a partir de:
          34.19 €
          Data de envio regular:
          8 dias úteis
          Configurar
        • GSX MILL Ball GSXB
          • Volume Discount

          NACHI(FUJIKOSHI)

          GSX MILL Ball GSXB

          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          1 ~ 3BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]3 ~ 92For General Steels (AlCrN, etc.)60 ~ 80-6
          Preço (excluindo IVA) a partir de:
          51.87 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • TSC series carbide ball end mill, short model
          • Volume Discount
          • TS
          • General Steel
          • 2 Flutes
          • S (Short)

          MISUMI

          TSC series carbide ball end mill, short model

          [Features] -Good surface finish can be expected for the rough surface of the workpiece after machiningIt has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
          Ler mais
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.05 ~ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.2 ~ 252For High Hardness (Silicon Group)40 ~ 15015 ~ 753 ~ 20
          Data de envio regular:
          5 dias úteis
          Configurar
        • CBN Ball End Mill, 2-Flute
          • Volume Discount
          • High-Hardness Steel
          • 2 Flutes

          MISUMI

          CBN Ball End Mill, 2-Flute

          CBN ball end mill that's ideal for precision finishing is available at a value price
          Ler mais
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.3 ~ 1BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]0.5 ~ 1.22Non-Coated501.5 ~ 54
          Preço (excluindo IVA) a partir de:
          133.02 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • 2-Flute, Ball End, FX-MG-EBD
          • Volume Discount

          OSG

          2-Flute, Ball End, FX-MG-EBD

          Can work with materials ranging from general materials to quenched steel. Can also be compatible with high speed model machining centers.
          Ler mais
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.5 ~ 15BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]2.5 ~ 552TiAlN50 ~ 180-4 ~ 25
          Preço (excluindo IVA) a partir de:
          91.40 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Miniature Ball End Mill NCB-2
          • Volume Discount

          NS TOOL

          Miniature Ball End Mill NCB-2

          Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding
          Ler mais
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.2 ~ 0.9BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]0.8 ~ 3.62Non-Coated35-3
          Preço (excluindo IVA) a partir de:
          77.16 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Carbide Graphite Solid Ball End Mill 2-Flute, Standard Type
          • Volume Discount

          EIKOSHA

          Carbide Graphite Solid Ball End Mill 2-Flute, Standard Type

          Graphite Electrode Processing
          Ler mais
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.5 ~ 15BallAluminum[◎] / Copper[◎] / Graphite[◎]8 ~ 602-60 ~ 180-4 ~ 25
          Preço (excluindo IVA) a partir de:
          106.01 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • WXL-Coated 2-Flute Ball End Type WXL-EBD
          • DESCONTO
          • Volume Discount

          OSG

          WXL-Coated 2-Flute Ball End Type WXL-EBD

          [Features]· High-accuracy ball end mill coated with WXL hard lubricating film coating. Proven performance on a wide range of work materials. Long life regardless of whether being used for dry-type or wet-type machining.
          Ler mais
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.05 ~ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]0.2 ~ 382For General Steels (AlCrN, etc.)40 ~ 160-4 ~ 20
          Preço (excluindo IVA) a partir de:
          49.20 €
          Preço especial
          Data de envio regular:
          Item em stock: 1 dia útil
          Alguns artigos podem ser enviados no próprio dia
          Configurar
        • SBD2LA Long Ball End Mill, 2-Flute, OK Coated
          • Volume Discount

          OKAZAKI SEIKO

          SBD2LA Long Ball End Mill, 2-Flute, OK Coated

          [Features] A carbide long ball end mill with 2 cutting edges.The deep rib shape prevents tool interference when deep cutting.The long shank allows milling in a wide range.[Features] Suitable for milling curved surfaces, engraving and R-slot milling.
          Ler mais
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          1 ~ 12.5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]2 ~ 602TiAlN80 ~ 23014 ~ 216 ~ 25
          Preço (excluindo IVA) a partir de:
          97.43 €
          Data de envio regular:
          8 dias úteis
          Configurar
        • All Purpose Ball End Mill Long 4-Flute 3043
          • Volume Discount

          GUHRING

          All Purpose Ball End Mill Long 4-Flute 3043

          Machining is possible with a wide range of materials, from raw materials to hardened materials. Suitable for processing of curved surfaces.
          Ler mais
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          -Ball--4Other75 ~ 150-3 ~ 12
          Preço (excluindo IVA) a partir de:
          123.44 €
          Data de envio regular:
          8 dias úteis
          Configurar
        • Carbide Ball End Mill for Resin Processing PSB-2
          • Volume Discount

          KYOWA SEIKO

          Carbide Ball End Mill for Resin Processing PSB-2

          [Features] It can be used for side machining, curved surface machining, carving machining, R-machining and grooving. [Features] It is possible to cut aluminium and resin by using carbide materials with high hardness.
          Ler mais
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.1 ~ 3BallAluminum[◎] / Resin[◎]0.6 ~ 202-45 ~ 100-3 ~ 6
          Preço (excluindo IVA) a partir de:
          85.48 €
          Data de envio regular:
          8 dias úteis
          Configurar
        • Carbide Miniature Ball End Mill KMBE-2
          • Volume Discount

          KYOWA SEIKO

          Carbide Miniature Ball End Mill KMBE-2

          [Features] It can be used for side machining, curved surface machining, curving, R-machining and grooving. [Features] Using carbide materials with high hardness, it can cut general steel, heat-treated steel and stainless steel.
          Ler mais
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.1 ~ 1.5BallGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎]0.4 ~ 82-40-3
          Preço (excluindo IVA) a partir de:
          95.00 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • SSPB220 CBN Super Spiral Ball End Mill

            NS TOOL

            SSPB220 CBN Super Spiral Ball End Mill

            [Features]· Spiral ball shape used to improve sharpness of cutting edge. · The cutting edge shape used improves the chipping resistance of the cutting edge. · When the peripheral cutting edge makes contact with the cutting surface, chatter vibration occurs due to an increase in cutting resistance and this affects tool life and cutting surface quality. (This effect can be reduced by using a strong back taper shape.) Torsion angle: 20°
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.1 ~ 3BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]0.15 ~ 3.62Non-Coated50 ~ 700.3 ~ 184
            Preço (excluindo IVA) a partir de:
            166.22 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • CoroMill Plura Carbide Ball End Mill, 1B240 (Hardness 48 HRC Or Less)
            • Volume Discount

            SANDVIK

            CoroMill Plura Carbide Ball End Mill, 1B240 (Hardness 48 HRC Or Less)

            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            2 ~ 10BallGeneral Steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]11 ~ 384Other80 ~ 125-6 ~ 20
            Preço (excluindo IVA) a partir de:
            101.61 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • CoroMill Plura General-Purpose Carbide Ball End Mill, 1B230 (Hardness 48 HRC Or Less)
            • Volume Discount

            SANDVIK

            CoroMill Plura General-Purpose Carbide Ball End Mill, 1B230 (Hardness 48 HRC Or Less)

            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.5 ~ 10BallGeneral Steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]3 ~ 322Other38 ~ 104-3 ~ 20
            Preço (excluindo IVA) a partir de:
            111.41 €
            Data de envio regular:
            7 dias úteis
            Configurar
          • Carbide 2-Flute Short Ball End Mill 30° B222X
            • Volume Discount

            7 LEADERS

            Carbide 2-Flute Short Ball End Mill 30° B222X

            [Features]· 2-flute short ball end mill that supports a wide range of work materials.· Capable of continuous stable cutting.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.15 ~ 10BallGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]0.6 ~ 382-50 ~ 100-4 ~ 20
            Preço (excluindo IVA) a partir de:
            26.66 €
            Data de envio regular:
            8 dias úteis
            Configurar
          • TSC series carbide ball end mill (R accuracy ±3μm)
            • Volume Discount
            • TS
            • General Steel
            • 2 Flutes
            • S (Short)

            MISUMI

            TSC series carbide ball end mill (R accuracy ±3μm)

            [Features] -Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of moulds with high quality tools with low quality variation-Seamless shape (sharpening from outer edge to centre of rounded blade in 1 process) is designed to create smooth cutting edge flank without steps.
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            1.5 ~ 3BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ~ 92For High Hardness (Silicon Group)60 ~ 90-6
            Preço (excluindo IVA) a partir de:
            48.69 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model
            • Volume Discount
            • TS
            • General Steel
            • 2 Flutes
            • B (Stub)

            MISUMI

            TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

            [Features] -Designed with optimum blade length, shank length and overall length considering processing with shrink fit holder-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. High-precision tools with low quality variation are ideal for high-precision 3D machining of moulds-Sampless shape (sharpening from the outer edge to the centre of the rounded blade in one process) is designed to produce a smooth cutting edge without steps.
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.3 ~ 2BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.6 ~ 42For High Hardness (Silicon Group)40-6
            Preço (excluindo IVA) a partir de:
            66.91 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model
            • Volume Discount
            • TS
            • General Steel
            • 2 Flutes
            • B (Stub)

            MISUMI

            TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

            [Features] -Compatible with shrink fit chucks for high precision machining-Designed with short flute length and overall length for shrink fit and emphasis on rigidityIt has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.2 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.4 ~ 122For High Hardness (Silicon Group)40 ~ 65-4 ~ 12
            Preço (excluindo IVA) a partir de:
            25.08 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • XAL series carbide ball end mill, 2-flute / short model
            • Volume Discount
            • XAL
            • General Steel
            • 2 Flutes

            MISUMI

            XAL series carbide ball end mill, 2-flute / short model

            XAL Series is the definitive choice for cost-sensitive customers
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.05 ~ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]0.2 ~ 382For General Steels (AlCrN, etc.)40 ~ 160-3 ~ 20
            Preço (excluindo IVA) a partir de:
            14.53 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • XAC series carbide ball end mill, 2-flute / short model
            • Volume Discount
            • TiAlN
            • General Steel
            • 2 Flutes
            • S (Short)

            MISUMI

            XAC series carbide ball end mill, 2-flute / short model

            [Features] All-purpose ball nose end mill with 2 cutting edges for a wide range of profiling-For rough machining of workpieces that are expected to have a good surface finish after machining-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.2 ~ 12.5BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.8 ~ 502TiAlN40 ~ 180-3 ~ 25
            Preço (excluindo IVA) a partir de:
            22.45 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • XAC series carbide ball end mill, 2-flute / short, long shank model
            • Volume Discount
            • TiAlN
            • General Steel
            • 2 Flutes

            MISUMI

            XAC series carbide ball end mill, 2-flute / short, long shank model

            [Features] -Ideal for high precision 3D machining of moulds due to high tool rigidity and excellent chip evacuation-For rough machining of the workpiece, a good surface finish can be expected after machining.-Long shank type, ideal for deep cavity milling-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            2 ~ 8BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]8 ~ 302TiAlN100 ~ 250-4 ~ 16
            Preço (excluindo IVA) a partir de:
            43.83 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • TSC series carbide ball end mill, regular model
            • Volume Discount
            • TS
            • General Steel
            • 2 Flutes
            • R (Regular)

            MISUMI

            TSC series carbide ball end mill, regular model

            [Features] -Regular bridge length allows for many regrinding times-Can be regrinded. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.2 ~ 8BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ~ 302For High Hardness (Silicon Group)50 ~ 14017 ~ 804 ~ 16
            Data de envio regular:
            5 dias úteis
            Configurar
          • TSC series carbide ball end mill, 2-flute / short, long shank model
            • Volume Discount
            • TS
            • General Steel
            • 2 Flutes
            • S (Short)

            MISUMI

            TSC series carbide ball end mill, 2-flute / short, long shank model

            [Features] -Long shank, ideal for deep cavity millingIt has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.5 ~ 12.5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ~ 302For High Hardness (Silicon Group)70 ~ 28015 ~ 803 ~ 25
            Data de envio regular:
            5 dias úteis
            Configurar
          • TSC series carbide ball end mill, 3-flute / short model
            • Volume Discount
            • TS
            • General Steel
            • 3 Flutes
            • S (Short)

            MISUMI

            TSC series carbide ball end mill, 3-flute / short model

            [Features] -The 3-edge shape is resistant to chattering and enables high feed rate-The surface of the workpiece is very well finished after machining.-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.5 ~ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ~ 253For High Hardness (Silicon Group)50 ~ 15015 ~ 756 ~ 20
            Data de envio regular:
            5 dias úteis
            Configurar
          • TSC series carbide ball end mill, 3-flute / regular model
            • Volume Discount
            • TS
            • General Steel
            • 3 Flutes
            • R (Regular)

            MISUMI

            TSC series carbide ball end mill, 3-flute / regular model

            [Features] -The 3-edge shape is chatter resistant and enables high feed-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            1 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ~ 223For High Hardness (Silicon Group)50 ~ 11017 ~ 726 ~ 12
            Data de envio regular:
            5 dias úteis
            Configurar
          • TSC series carbide ball end mill, short model
            • Volume Discount
            • TS
            • General Steel
            • 4 Flutes
            • S (Short)

            MISUMI

            TSC series carbide ball end mill, short model

            [Features] -The surface of the workpiece is very good after machining.-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            1 ~ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 254For High Hardness (Silicon Group)50 ~ 15015 ~ 756 ~ 20
            Data de envio regular:
            5 dias úteis
            Configurar
          • TSC series carbide ball end mill, 4-flute / regular model
            • Volume Discount
            • TS
            • General Steel
            • 4 Flutes
            • R (Regular)

            MISUMI

            TSC series carbide ball end mill, 4-flute / regular model

            [Features] -The surface of the workpiece is very good after machining.-It has coating with high oxidation resistance and high hardness, and achieves long service life. As a coating property, it is effective in high-speed machining and dry machining.-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            1.5 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ~ 224For High Hardness (Silicon Group)60 ~ 11017 ~ 726 ~ 12
            Data de envio regular:
            5 dias úteis
            Configurar
          • Carbide ball end mill, 2-flute / short model
            • Volume Discount
            • Non-Coated
            • General Steel
            • 2 Flutes
            • S (Short)

            MISUMI

            Carbide ball end mill, 2-flute / short model

            Highly versatile due to the non-coated specification
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.2 ~ 10BallGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]0.8 ~ 252Non-Coated40 ~ 150-3 ~ 20
            Data de envio regular:
            5 dias úteis
            Configurar
          • TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade
            • Volume Discount
            • TS
            • High-Hardness Steel
            • 2 Flutes

            MISUMI

            TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

            [Features] -Ultra-fine-grained carbide base material suitable for machining high hardness steels is used (according to the manufacturer's cutting test results).-MIAutomatic steelI-Original shape with rigid cutting edge treatment and no side cutting edge. High strength of the tool and cutting edge, resulting in a stable cutting edge shape and long tool life in high-speed milling-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            1 ~ 5BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]1 ~ 52For High Hardness (Silicon Group)50 ~ 905 ~ 106 ~ 10
            Preço (excluindo IVA) a partir de:
            108.89 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model
            • Volume Discount
            • TS
            • High-Hardness Steel
            • 2 Flutes
            • B (Stub)

            MISUMI

            TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

            The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.3 ~ 3BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]0.6 ~ 62For High Hardness (Silicon Group)40-6
            Preço (excluindo IVA) a partir de:
            66.98 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model
            • Volume Discount
            • TS
            • SUS
            • 2 Flutes
            • S (Short)

            MISUMI

            TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model

            Blade shape ball end mill that's suitable for work materials with low thermal conductivity such as the hard-to-cut SUS
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            1 ~ 5BallGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○]3 ~ 152For High Hardness (Silicon Group)50 ~ 100-6 ~ 10
            Preço (excluindo IVA) a partir de:
            99.51 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model
            • Volume Discount
            • DLC
            • Aluminum
            • 2 Flutes
            • S (Short)

            MISUMI

            DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

            The cutting performance of aluminum has been improved by the combination of sharp cutting edge and DLC coating
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.5 ~ 6BallAluminum[◎] / Copper[○] / Resin[○]1.5 ~ 182DLC50 ~ 11014 ~ 684 ~ 12
            Data de envio regular:
            5 dias úteis
            Configurar
          • Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model
            • Volume Discount
            • Non-Coated
            • Aluminum
            • 2 Flutes
            • S (Short)

            MISUMI

            Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

            A type for aluminum that achieves high efficiency while having the affordable uncoated design
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.5 ~ 6BallAluminum[◎] / Copper[○] / Graphite[○] / Resin[○]1.5 ~ 182Non-Coated50 ~ 11014 ~ 684 ~ 12
            Data de envio regular:
            5 dias úteis
            Configurar
          • CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model
            • Volume Discount
            • CrN
            • Copper
            • 2 Flutes
            • S (Short)

            MISUMI

            CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model

            Ideal for copper electrode processing due to the CrN coating that exhibits excellent lubricity
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.5 ~ 6BallAluminum[○] / Copper[◎] / Resin[○]1.5 ~ 182CrN50 ~ 120-4 ~ 12
            Preço (excluindo IVA) a partir de:
            33.74 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute
            • Volume Discount
            • DIA
            • Graphite
            • 2 Flutes
            • L (Long)

            MISUMI

            Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute

            Diamond coated products that exert tremendous durability are available in the industry's lowest price
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.5 ~ 6BallAluminum[○] / Copper[○] / Graphite[◎] / Resin[○]3 ~ 552Dia Coat50 ~ 20020 ~ 654 ~ 12
            Preço (excluindo IVA) a partir de:
            106.79 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model
            • Volume Discount
            • DIA
            • Graphite
            • 4 Flutes
            • S (Short)

            MISUMI

            Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model

            4-flute ball for graphite that achieves high feed
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            1 ~ 6BallAluminum[○] / Copper[○] / Graphite[◎] / Resin[○]4 ~ 244Dia Coat50 ~ 80-6 ~ 12
            Preço (excluindo IVA) a partir de:
            99.52 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model
            • Volume Discount
            • Non-Coated
            • Graphite
            • 2 Flutes
            • L (Long)

            MISUMI

            Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model

            The price of the non-coated product with excellent cost performance has been further reduced
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            1 ~ 6BallAluminum[○] / Copper[○] / Graphite[◎] / Resin[○]10 ~ 552Non-Coated100 ~ 20020 ~ 654 ~ 12
            Preço (excluindo IVA) a partir de:
            80.28 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model
            • Volume Discount
            • Non-Coated
            • Resin
            • 2 Flutes
            • S (Short)

            MISUMI

            Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model

            Sharp edge that's suitable for machining resin
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.5 ~ 6BallAluminum[○] / Copper[○] / Graphite[○] / Resin[◎]1.5 ~ 182Non-Coated50 ~ 120-4 ~ 12
            Preço (excluindo IVA) a partir de:
            31.53 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model
            • Volume Discount
            • MR
            • General Steel
            • 2 Flutes
            • S (Short)

            MISUMI

            MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model

            High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!
            Ler mais
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.1 ~ 10BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]0.4 ~ 252MRC50 ~ 150-4 ~ 20
            Preço (excluindo IVA) a partir de:
            19.40 €
            Data de envio regular:
            5 dias úteis
            Configurar

          Produtos recentemente visualizados