Registar

Estamos a traduzir a nossa loja para português! 

Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Categoria
Ver mais
Condições de filtragem

Limpar tudo

  • Estoque
  • Blade diameter (D)(φ)
  • R Size(mm)
    [0.1-3/0.1mm unidades]
  • work material
  • Blade length (ℓ)(mm)
    [5-56/1mm unidades]
  • Number of flutes(sheet)
  • Type
  • Fabricante
    • 114 itens
    * Informações sobre dias de expedição, custos de expedição e preços
    Lista
    Foto
    Comparar especificações
  • 1
  • 2
  • 3
  • Seguinte
    • CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut
      • Volume Discount

      SANDVIK

      CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut

      Unique shape exhibits high performance
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 160.2 ～ 2General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC60[○]2 ～ 162 ～ 4Radius57 ～ 1006 ～ 1618 ～ 42
      Preço (excluindo IVA) a partir de:
      105.98 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model
      • Volume Discount
      • Non-Coated
      • Aluminum
      • 3 Flutes

      MISUMI

      Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

      Comes with the rounded edge that suppresses machining streaks in standing-wall multi-stage machining
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      5 ～ 220.5 ～ 2Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]9 ～ 333Radius80 ～ 2004 ～ 20-
      Preço (excluindo IVA) a partir de:
      109.63 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC Series Carbide Uneven Lead 4-Flute Radius End Mill
      • Volume Discount

      MISUMI

      TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

      Introducing the long-awaited unequal lead 4-flute radius end mill in the TSC series (helix angle of 40° / 43°)
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 250.2 ～ 6.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]4 ～ 504Radius50 ～ 1206 ～ 25-
      Preço (excluindo IVA) a partir de:
      47.37 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • VAC Series Carbide 4-Flute Uneven Lead Radius End Mill
      • Volume Discount

      MISUMI

      VAC Series Carbide 4-Flute Uneven Lead Radius End Mill

      [Features] -Suppresses chatter in uneven pitch and uneven flutes-Stable machining is possible while maintaining finished surface accuracy-Cutting edge radius also enhances cutting edge rigidity-Can machine heat treated steel up to 50HRC-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1.5 ～ 120.2 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]4 ～ 304Radius50 ～ 1506 ～ 12-
      Preço (excluindo IVA) a partir de:
      49.28 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • Power Radius End Mill MSXH440R
      • Volume Discount

      NS TOOL

      Power Radius End Mill MSXH440R

      Adopts powered-up unequal leads and large unequal divisions to suppress chatter and realize stable machining
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.3 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]8 ～ 264Radius60 ～ 806 ～ 12-
      Preço (excluindo IVA) a partir de:
      69.81 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • Uneven Lead End Mill (4 Flutes) for Machining FX Coated Titanium Alloy

        OSG

        Uneven Lead End Mill (4 Flutes) for Machining FX Coated Titanium Alloy

        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        12 ～ 25R0 ～ R6-24 ～ 504Radius90 ～ 14012 ～ 2536 ～ 75
        Preço (excluindo IVA) a partir de:
        113.10 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • XAL series carbide radius end mill, 2-flute / short model
        • Volume Discount
        • XAL
        • General Steel
        • 2 Flutes

        MISUMI

        XAL series carbide radius end mill, 2-flute / short model

        Radius end mills are available at low prices
        Ler mais
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]3 ～ 302Radius50 ～ 754 ～ 12-
        Preço (excluindo IVA) a partir de:
        14.52 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • XAL series carbide radius end mill, 4-flute / short model
        • Volume Discount
        • XAL
        • General Steel
        • 4 Flutes

        MISUMI

        XAL series carbide radius end mill, 4-flute / short model

        The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes
        Ler mais
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        3 ～ 200.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]8 ～ 384Radius50 ～ 1004 ～ 20-
        Preço (excluindo IVA) a partir de:
        18.89 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • Powerful Type Multi-Function FXS-PKE
        • Volume Discount

        OSG

        Powerful Type Multi-Function FXS-PKE

        In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.
        Ler mais
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        3 ～ 200.2 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]5 ～ 304Radius60 ～ 1606 ～ 209 ～ 60
        Preço (excluindo IVA) a partir de:
        95.20 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • 3-Flute, Corner R Short for Steel / Aluminum Alloy CA-CR-ETS
        • Volume Discount

        OSG

        3-Flute, Corner R Short for Steel / Aluminum Alloy CA-CR-ETS

        Even in machining of aluminum parts with high cutting removal rate, performs chip discharge ability excellent in creating of unique groove form, at the same time achieving significant depth of cut and high feed.
        Ler mais
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        6 ～ 120.5 ～ 2Aluminum[◎] / Copper[◎] / Resin[○]13 ～ 263Radius50 ～ 756 ～ 12-
        Preço (excluindo IVA) a partir de:
        66.10 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Multi-Function Type for Deep Wall Applications FXS-MFE

          OSG

          Multi-Function Type for Deep Wall Applications FXS-MFE

          A wide standing wall is machined with high efficiency and precision in step cutting.Coated for steelStandard/Alteration Category: Manufacturer's standard productNumber of flutes (pcs.) 4Spiral angle, Strong spiral (45 to 60°).
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          100.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]154Radius1308-
          Preço (excluindo IVA) a partir de:
          225.60 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Unequal Lead End Mill Regular 4-Flute Corner R RF100Ti 3498
          • Volume Discount

          GUHRING

          Unequal Lead End Mill Regular 4-Flute Corner R RF100Ti 3498

          [Features]· The adoption of a shape and coating ideal for titanium and titanium alloy enables high-efficiency machining.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          6 ～ 25--13 ～ 454Radius57 ～ 1216 ～ 2521 ～ 65
          Preço (excluindo IVA) a partir de:
          100.62 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730
          • Volume Discount

          SANDVIK

          CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730

          [Features]· Twice the cutting depth that was conventionally possible· Ideal for everything from shoulder cutting to full grooving.· With reinforced edge lines, assures long product life even with intense machining.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          -0.5 ～ 2General Steel[○] / Cast Iron[○]-4Radius57 ～ 726 ～ 12-
          Preço (excluindo IVA) a partir de:
          111.93 €
          Data de envio regular:
          8 dias úteis
          Configurar
        • TSC series carbide radius end mill, 4-flute / stub model
          • Volume Discount
          • TS
          • General Steel
          • 4 Flutes
          • B (Stub)

          MISUMI

          TSC series carbide radius end mill, 4-flute / stub model

          A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          2 ～ 60.2 ～ 0.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 94Radius506-
          Preço (excluindo IVA) a partir de:
          59.74 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • XAL series carbide radius end mill, 3-flute, 45° torsion / regular model
          • Volume Discount
          • XAL
          • General Steel
          • 3 Flutes

          MISUMI

          XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

          3-flute 45° helix radius that's resistant to chattering is available at an affordable price
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          3 ～ 120.2 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]16 ～ 383Radius60 ～ 1006 ～ 12-
          Preço (excluindo IVA) a partir de:
          23.73 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • XAL series carbide radius end mill, 4-flute, 45° torsion / regular model
          • Volume Discount
          • XAL
          • General Steel
          • 4 Flutes

          MISUMI

          XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

          4-Flute Radius for High-Efficiency and High-Speed Machining
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          4 ～ 120.2 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]18 ～ 384Radius60 ～ 1006 ～ 12-
          Preço (excluindo IVA) a partir de:
          23.73 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model
          • Volume Discount
          • TS
          • General Steel
          • 3 Flutes
          • B (Stub)

          MISUMI

          TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

          [Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          3 ～ 120.3 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ～ 183Radius40 ～ 656 ～ 12-
          Preço (excluindo IVA) a partir de:
          76.51 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model
          • Volume Discount
          • TS
          • General Steel
          • 4 Flutes
          • B (Stub)

          MISUMI

          TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

          [Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          3 ～ 120.3 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ～ 184Radius40 ～ 656 ～ 12-
          Preço (excluindo IVA) a partir de:
          82.35 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill, 3-flute, 45° spiral / stub model
          • Volume Discount
          • TS
          • General Steel
          • 3 Flutes
          • B (Stub)

          MISUMI

          TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

          [Features] -Unique chip shape allows flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          3 ～ 120.5 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ～ 183Radius60 ～ 1006 ～ 1214 ～ 68
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill, 3-flute, 45° spiral / short model
          • Volume Discount
          • TS
          • General Steel
          • 3 Flutes
          • S (Short)

          MISUMI

          TSC series carbide radius end mill, 3-flute, 45° spiral / short model

          [Features] -The 3-flute shape makes it resistant to chatter and can smoothly transition from grooving to slot milling-Unique chip channel shape enables slot milling with a depth of cut equivalent to 2 flutes-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          3 ～ 120.3 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ～ 263Radius60 ～ 1006 ～ 1218 ～ 70
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill, 3-flute, 45° spiral / regular model
          • Volume Discount
          • TS
          • General Steel
          • 3 Flutes
          • R (Regular)

          MISUMI

          TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

          [Features] -Radius multi-function cutter-The 3-flute shape makes it resistant to chatter and can be used continuously from plunging to grooving-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 flutes-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Radius flute is also effective in suppressing chips.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          3 ～ 200.2 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ～ 563Radius60 ～ 1306 ～ 2026 ～ 92
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model
          • Volume Discount
          • TS
          • General Steel
          • 4 Flutes
          • S (Short)

          MISUMI

          TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

          [Features] -Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 flutes-The high cutting capacity makes it possible to work at a feed rate more than twice that of a standard cutter-Long shank is ideal for milling deep cavities-For ø7 and above, the shank diameter is thinner than the cutting diameter to avoid interference-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          3 ～ 220.2 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ～ 304Radius80 ～ 2006 ～ 2010 ～ 18
          Preço (excluindo IVA) a partir de:
          76.72 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill, 4-flute, 45° spiral / stub model
          • Volume Discount
          • TS
          • General Steel
          • 4 Flutes
          • B (Stub)

          MISUMI

          TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

          [Features] -Radius end mill-Unique shape of chip groove enables cutting of grooves with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Radius cutting edge is also effective in suppressing chipping-By adopting a throat length, which is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface and suppress chatter at the same time
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          3 ～ 120.5 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ～ 184Radius60 ～ 1006 ～ 1214 ～ 68
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill, 4-flute, 45° spiral / short model
          • Volume Discount
          • TS
          • General Steel
          • 4 Flutes
          • S (Short)

          MISUMI

          TSC series carbide radius end mill, 4-flute, 45° spiral / short model

          [Features] -Multi-function end mill with radius-Unique chip groove shape allows cutting of grooves with a depth of cut equal to that of 2 flutes-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, prices, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          3 ～ 200.2 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ～ 384Radius60 ～ 1106 ～ 2018 ～ 73
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill, 4-flute, 45°, regular model
          • Volume Discount
          • TS
          • General Steel
          • 4 Flutes
          • R (Regular)

          MISUMI

          TSC series carbide radius end mill, 4-flute, 45°, regular model

          [Features] -Radius multi-function cutter-Unique chip shape enables flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, pricing, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          3 ～ 200.2 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ～ 564Radius60 ～ 1306 ～ 2026 ～ 92
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill, 2-flute stub model
          • Volume Discount
          • TS
          • General Steel
          • 2 Flutes
          • B (Stub)

          MISUMI

          TSC series carbide radius end mill, 2-flute stub model

          [Features] -Stiffness-oriented design with optimum blade, shank and overall length taking into account processing with shrink fit holder-Regrindable. Please refer to the "Regrinding Service" page for application procedures, scope of services, prices, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          2 ～ 120.2 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 182Radius35 ～ 604 ～ 12-
          Preço (excluindo IVA) a partir de:
          34.89 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
          • Volume Discount
          • TS
          • General Steel
          • 2 Flutes
          • B (Stub)

          MISUMI

          TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

          [Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ～ 182Radius40 ～ 754 ～ 1214 ～ 45
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill, 2-flute / short model
          • Volume Discount
          • TS
          • General Steel
          • 2 Flutes
          • S (Short)

          MISUMI

          TSC series carbide radius end mill, 2-flute / short model

          [Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          1 ～ 200.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ～ 402Radius40 ～ 1104 ～ 2017 ～ 45
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill, 2-flute / regular model
          • Volume Discount
          • TS
          • General Steel
          • 2 Flutes
          • R (Regular)

          MISUMI

          TSC series carbide radius end mill, 2-flute / regular model

          [Features]General 2-flute cutter with regular flute length and flute radius-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          1 ～ 200.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 602Radius45 ～ 1254 ～ 2023 ～ 55
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill, 4-flute / stub model
          • Volume Discount
          • TS
          • General Steel
          • 4 Flutes
          • B (Stub)

          MISUMI

          TSC series carbide radius end mill, 4-flute / stub model

          [Features] -Designed with optimum blade length, shank length and overall length considering processing with shrink holder-Can be resharpened. Please refer to the "Regrinding Service" page for information on possible applications, range of services, prices, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          2 ～ 120.3 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 184Radius35 ～ 604 ～ 12-
          Preço (excluindo IVA) a partir de:
          45.06 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill, 4-flute / stub model
          • Volume Discount
          • TS
          • General Steel
          • 4 Flutes
          • B (Stub)

          MISUMI

          TSC series carbide radius end mill, 4-flute / stub model

          [Features] -Short cutting edge length with cutting edge radius fitted to a general purpose 4 flute cutter-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ～ 184Radius40 ～ 754 ～ 1214 ～ 45
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill, 4-flute / short model
          • Volume Discount
          • TS
          • General Steel
          • 4 Flutes
          • S (Short)

          MISUMI

          TSC series carbide radius end mill, 4-flute / short model

          [Features] -Short cutting edge length with cutting edge radius attached to a general purpose cutter with 4 cutting edges-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ～ 244Radius40 ～ 754 ～ 1217 ～ 45
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill, 4-flute / regular model
          • Volume Discount
          • TS
          • General Steel
          • 4 Flutes
          • R (Regular)

          MISUMI

          TSC series carbide radius end mill, 4-flute / regular model

          [Features] -Regular cutting edge length with cutting edge radius fitted to a general purpose cutter with 4 cutting edges-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 364Radius45 ～ 854 ～ 1223 ～ 55
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model
          • Volume Discount
          • TS
          • High-Hardness Steel
          • Multi-Flutes （5 ~）
          • B (Stub)

          MISUMI

          TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model

          [Features] -High helix angle and radius end mill for machining high hardness steel-High tool rigidity minimises tool tilt when side milling-Machining high hardness steel up to 65HRC is possible-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          6 ～ 120.5 ～ 2General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]5 ～ 126Radius60 ～ 856 ～ 1211 ～ 55
          Data de envio regular:
          5 dias úteis
          Configurar
        • TSC series carbide radius end mill, 3-flute, 45° spiral / short model
          • Volume Discount
          • TS
          • SUS
          • 3 Flutes
          • S (Short)

          MISUMI

          TSC series carbide radius end mill, 3-flute, 45° spiral / short model

          The popular radius type for stainless steel processing is also effective in preventing chipping
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          3 ～ 120.5 ～ 2General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]7 ～ 183Radius60 ～ 1006 ～ 12-
          Preço (excluindo IVA) a partir de:
          93.25 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model
          • Volume Discount
          • DLC
          • Aluminum
          • 2 Flutes
          • R (Regular)

          MISUMI

          DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

          In addition to the standard products, the radius can be selected extensively for manufactured products
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          2 ～ 120.2 ～ 1Aluminum[◎] / Copper[○] / Resin[○]5 ～ 362Radius40 ～ 804 ～ 1223 ～ 50
          Data de envio regular:
          5 dias úteis
          Configurar
        • DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
          • Volume Discount
          • DLC
          • Aluminum
          • 3 Flutes
          • R (Regular)

          MISUMI

          DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

          The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughness
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          2 ～ 120.2 ～ 1Aluminum[◎] / Copper[○] / Resin[○]5 ～ 363Radius40 ～ 804 ～ 1223 ～ 50
          Data de envio regular:
          5 dias úteis
          Configurar
        • Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model
          • Volume Discount
          • Non-Coated
          • Aluminum
          • 2 Flutes
          • R (Regular)

          MISUMI

          Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

          Non-coated manufactured products can be shipped on the 5th day in addition to the stocked products
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          2 ～ 120.2 ～ 1Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]5 ～ 362Radius40 ～ 804 ～ 1223 ～ 50
          Data de envio regular:
          5 dias úteis
          Configurar
        • Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
          • Volume Discount
          • Non-Coated
          • Aluminum
          • 3 Flutes
          • R (Regular)

          MISUMI

          Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

          Radius type that's also effective in preventing cutter marks
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          2 ～ 120.2 ～ 1Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]5 ～ 363Radius40 ～ 804 ～ 1223 ～ 50
          Data de envio regular:
          5 dias úteis
          Configurar
        • Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model
          • Volume Discount
          • DIA
          • Graphite
          • 4 Flutes
          • Long

          MISUMI

          Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model

          The diamond coated radius shape that's ideal for shaping graphite
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          6 ～ 120.5 ～ 3Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]30 ～ 604Radius150 ～ 2006 ～ 1260 ～ 85
          Preço (excluindo IVA) a partir de:
          166.75 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model
          • Volume Discount
          • Non-Coated
          • Resin
          • 2 Flutes
          • R (Regular)

          MISUMI

          Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model

          Small radius type that prevents cutter marks on resin
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          1 ～ 100.2Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]3 ～ 302Radius50 ～ 803 ～ 10-
          Preço (excluindo IVA) a partir de:
          44.46 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
          • Non-Coated
          • General Steel

          MISUMI

          Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

          [Features] -Alteration cutter that can determine the radius of the carbide cutter in 0.1 mm increments-Can be reground. Please refer to the "Regrinding service" page for information on possible applications, range of services, prices, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          1 ～ 200.1 ～ 3General Steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4 ～ 602 ～ 4Radius40 ～ 1254 ～ 20-
          Data de envio regular:
          7 dias úteis
          Configurar
        • XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Blade Length 2.5D Type / Regular Type
          • Volume Discount

          MISUMI

          XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Blade Length 2.5D Type / Regular Type

          · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· 45° radius end mill capable of high-speed and high-efficiency machining
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          4 ～ 120.2 ～ 1General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]18 ～ 384Radius60 ～ 1006 ～ 12-
          Preço (excluindo IVA) a partir de:
          75.31 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model
          • Volume Discount

          MISUMI

          XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

          Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          2 ～ 200.2 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]4 ～ 454Radius50 ～ 1104 ～ 20-
          Preço (excluindo IVA) a partir de:
          17.06 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • VAC Series Carbide 2-Flute Radius End Mill
          • Volume Discount

          MISUMI

          VAC Series Carbide 2-Flute Radius End Mill

          [Features] -Cutting edge radius also reinforced cutting edge rigid-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can handle heat treated steel up to 50HRC-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2.5 ～ 302Radius50 ～ 1306 ～ 12-
          Preço (excluindo IVA) a partir de:
          49.28 €
          Data de envio regular:
          5 dias úteis
          Configurar
      • 1
      • 2
      • 3
      • Seguinte

        • O produto que procura não se encontra aqui?

        Categorias relacionadas com Carbide Radius End Mills