Registar

Estamos a traduzir a nossa loja para português! 

Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Categoria
Ver mais
Condições de filtragem

Limpar tudo

  • Blade diameter (D)(φ)
  • R Size(mm)
  • work material
  • Blade length (ℓ)(mm)
  • Number of flutes(sheet)
  • Type
  • Fabricante

Carbide Radius End Mills (Type: High-Feed Radius)

12 itens
* Informações sobre dias de expedição, custos de expedição e preços
Lista
Foto
Comparar especificações
  • 1
    • TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 3 Flutes
      • S (Short)

      MISUMI

      TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

      [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ～ 120.813 ～ 2.438General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]8 ～ 243High-Feed Radius80 ～ 1606 ～ 1235 ～ 108
      Preço (excluindo IVA) a partir de:
      93.37 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 3 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

      [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, so that plunge machining is possible-Using stitch grooves that are the same length as the cutting diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-use for engraving, side face, rough and medium grinding.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 120.5 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]2 ～ 123High-Feed Radius50 ～ 1004 ～ 12-
      Preço (excluindo IVA) a partir de:
      87.94 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 3 Flutes
      • S (Short)

      MISUMI

      TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

      Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ～ 120.813 ～ 2.438General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]8 ～ 243High-Feed Radius50 ～ 1006 ～ 12-
      Preço (excluindo IVA) a partir de:
      122.52 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

      [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when bottom face is milled, enabling high-speed feed (2) Minimizing cusp height (uncut part) during contour milling reduces the number of average finishing operations-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ～ 200.813 ～ 2.607General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]8 ～ 404High-Feed Radius50 ～ 1506 ～ 20-
      Preço (excluindo IVA) a partir de:
      116.38 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

      [Features] -Combined corner radius shape of shoulder R and bottom R, (1) cutting chips are thin when bottom face is milled, enabling high-speed feed (2) minimizing cusp height (uncut part) during contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ～ 120.813 ～ 2.438General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]8 ～ 244High-Feed Radius80 ～ 1606 ～ 1235 ～ 108
      Preço (excluindo IVA) a partir de:
      96.97 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 3 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

      [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, allowing plunge-cut machining-Multi-faceted type that can be used for engraving, side face, rough and medium grinding-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 120.5 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]4 ～ 243High-Feed Radius50 ～ 1004 ～ 12-
      Preço (excluindo IVA) a partir de:
      83.28 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 4 Flutes

      MISUMI

      TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

      [Features] -High rigidity is achieved by using a negative radius and a short cutting edge length with no helix angle, and chatter is suppressed even in pocket corners-Since the machine has a rear taper, it is possible to perform machining without the peripheral edge hitting the side when machining corners-Even when machining the bottom side, a single machine can be used from middle finishing to final finishing, achieving a reduction in machining time.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.75 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]1.2 ～ 54High-Feed Radius60 ～ 1106 ～ 127.5 ～ 24
      Preço (excluindo IVA) a partir de:
      64.07 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

      [Features] -High rigidity and cutting sharpness are achieved by the combination of negative cutting edge radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Using stitch grooves that have the same groove length as the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-purpose for engraving, side face, rough and medium finishing-Can be resharpened. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 120.5 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]2 ～ 124High-Feed Radius50 ～ 1004 ～ 12-
      Preço (excluindo IVA) a partir de:
      56.61 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

      [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Variable design that can be used for engraving, side faces, coarse and medium finish-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the machine, what services it offers, prices, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 200.5 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]4 ～ 404High-Feed Radius50 ～ 1304 ～ 20-
      Preço (excluindo IVA) a partir de:
      77.71 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model

      The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 60.2 ～ 0.5General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]3 ～ 94High-Feed Radius506-
      Preço (excluindo IVA) a partir de:
      100.26 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • CBN 3-Flute Corner Radius End Mill SBRE-3

        KYOWA SEIKO

        CBN 3-Flute Corner Radius End Mill SBRE-3

        Direct milling of high hardness materials and hardened steel.High efficiency machining is possible with high feed rate.Machining applications (machining shape): flat surface / side surface / curved surface / groove / bevel cut.
        Ler mais
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        3 ～ 6-High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]1.5 ～ 23High-Feed Radius50 ～ 706-
        Preço (excluindo IVA) a partir de:
        288.25 €
        Data de envio regular:
        8 dias úteis
        Configurar
      • CBN 3-Flute Corner Radius End Mill SBREF-3

          KYOWA SEIKO

          CBN 3-Flute Corner Radius End Mill SBREF-3

          Direct milling of high-hardness materials and hardened steelHighly efficient machining with high feed rate possibleMachining applications (machining mode): flat surface / side surface / curved surface / groove / angled cut.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          0.3 ～ 2-High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]0.5 ～ 1.53High-Feed Radius504-
          Preço (excluindo IVA) a partir de:
          188.11 €
          Data de envio regular:
          8 dias úteis
          Configurar
      • 1

        • O produto que procura não se encontra aqui?

        Categorias relacionadas com Carbide Radius End Mills