Carbide Radius End Mills（work material：Quenched and tempered steel）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
HRRS, HM Coated 4-Flute Short Shank Radius
UNION TOOL
[Features]
· Unique corner rounding creates larger cutting depth and pick feed than with a ball
· The seamless corner radius shape reduces cutting resistance and chattering
· High hardness materials up to 65 HRC can also be machinedConfigure nowStarting from∗ ： 76.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
HRRS, HM Coated 4-Flute Radius
UNION TOOL
[Features]
· Higher speed and higher precision machining enabled by shortening the total length and reducing the protruding part of the tool
· The optimized corner radius size enables processing with larger feed than conventional
· Seamless Corner Radius Shape
· High hardness materials up to 65 HRC can also be machinedConfigure nowStarting from∗ ： 76.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CBN End MILL (Small-Diameter, 2-Flute, Corner Radius End Mill) CBN-SXR
OSG
The three-dimensional negative shape of the R-profile provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.Configure nowStarting from∗ ： 101.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 2-flute / regular model
MISUMI
[Features]
General 2-flute cutter with regular flute length and flute radius
-Radius cutting edge also effectively suppresses chipping
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
Carbide Ultra FX Super End Mill (Powerful Type Multi-Function HS Shank) FXS-HS-PKE
OSG
Suitable for high efficiency machining of pocket engraving by required minimum blade length and strength torsion. The total length of the tool just fits to shrink - HSK.- Volume Discount
Configure nowStarting from∗ ： 122.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
HGGVRX HG Coated Carbide High Helix Radius
SANKO MFG
[Features]
· HGGCNX radius type.
· Suitable for corner rounding or cutting curved surfaces.
· High efficiency machining can be achieved due to a larger contact area than with a ball end mill, which increases the pick feed.- Volume Discount
Configure nowStarting from∗ ： 85.81 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut
SANDVIK
Unique shape exhibits high performance- Volume Discount
Configure nowStarting from∗ ： 109.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
XAL series carbide radius end mill, 4-flute / short model
MISUMI
The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes- Volume Discount
- XAL
- General Steel
- 4 Flutes
Configure nowStarting from∗ ： 18.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide long neck radius end mill, 2-flute, long neck model
MISUMI
Long neck radius that can be used as a ball and allows a large pick feed- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowMin. Shipping Days ： 5 Days -
2-Flute Corner R Short FX-CR-MG-EDS
OSG
Long shank type that can be used to process deep sections. Can also be used as a corner chipping prevention mechanism.- Volume Discount
Configure nowStarting from∗ ： 59.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Ultra FX Super End Mill (Corner R Short) FXS-CR-EMS
OSG
Radius end mills for high rigidity high-speed machining. Can perform high-speed machining of hardened steel.- Volume Discount
Configure nowStarting from∗ ： 106.85 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
HLRS 4-Flute Long-Neck Radius
UNION TOOL
[Features]
· Long neck radius shape that exhibits power in high-performance and high-quality machining
· Rigidity-oriented blade shape provides long life even when machining high hardness materials
· Capable of stable machining for both dry and wet type
· New HARDMAX coating adopted to improve oxidation resistance.Configure nowStarting from∗ ： 55.58 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
SSR200 CBN Super Speed Radius End Mill
NS TOOL
Achieves high-efficiency machining of corner radius due to outstanding CBN durabilityConfigure nowStarting from∗ ： 132.03 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels
NS TOOL
Superior surface finish with excellent chipping prevention and reduced chattering due to the use of MUGEN coating for hardened steels and a new shape- Volume Discount
- Stock
Configure nowStarting from∗ ： 53.49 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
SAGVR2LS SA Coated Carbide Radius 4-Flute Long Shank
SANKO MFG
[Features]
· Suitable for corner rounding or cutting curved surfaces.
· A long shank type which allows for machining in deep sections.
· Finished surfaces can be improved and high-efficiency machining is possible.- Volume Discount
Configure nowStarting from∗ ： 143.94 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
MISUMI
Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 117.55 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model
MISUMI
[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when bottom face is milled, enabling high-speed feed (2) Minimizing cusp height (uncut part) during contour milling reduces the number of average finishing operations
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 111.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
MISUMI
[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations
-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 89.61 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model
MISUMI
[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) cutting chips are thin when bottom face is milled, enabling high-speed feed (2) minimizing cusp height (uncut part) during contour milling reduces the number of middle finishing operations
-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 93.03 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 4-flute / stub model
MISUMI
A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Configure nowStarting from∗ ： 57.32 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL series carbide radius end mill, 3-flute, 45° torsion / regular model
MISUMI
3-flute 45° helix radius that's resistant to chattering is available at an affordable price- Volume Discount
- XAL
- General Steel
- 3 Flutes
Configure nowStarting from∗ ： 23.73 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL series carbide radius end mill, 4-flute, 45° torsion / regular model
MISUMI
4-Flute Radius for High-Efficiency and High-Speed Machining- Volume Discount
- XAL
- General Steel
- 4 Flutes
Configure nowStarting from∗ ： 23.73 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL series carbide radius end mill, 2-flute / short model
MISUMI
Radius end mills are available at low prices- Volume Discount
- XAL
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 14.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Uses a 3-bladed shape that is resistant to chatter, so that plunge machining is possible
-Using stitch grooves that are the same length as the cutting diameter, it is possible to machine the bottom surface while suppressing chatter
-Multi-use for engraving, side face, rough and medium grinding.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Configure nowStarting from∗ ： 84.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Uses a 3-bladed shape that is resistant to chatter, allowing plunge-cut machining
-Multi-faceted type that can be used for engraving, side face, rough and medium grinding
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 79.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
MISUMI
[Features]
-High rigidity is achieved by using a negative radius and a short cutting edge length with no helix angle, and chatter is suppressed even in pocket corners
-Since the machine has a rear taper, it is possible to perform machining without the peripheral edge hitting the side when machining corners
-Even when machining the bottom side, a single machine can be used from middle finishing to final finishing, achieving a reduction in machining time.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
Configure nowStarting from∗ ： 61.48 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative cutting edge radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Using stitch grooves that have the same groove length as the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter
-Multi-purpose for engraving, side face, rough and medium finishing
-Can be resharpened. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Configure nowStarting from∗ ： 54.32 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Variable design that can be used for engraving, side faces, coarse and medium finish
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the machine, what services it offers, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 74.55 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model
MISUMI
Long neck type with interference prevention can be selected from a number of effective lengths- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 88.68 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model
MISUMI
[Features]
-Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders
-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 cutting edges
-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Configure nowStarting from∗ ： 73.40 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model
MISUMI
[Features]
-Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders
-Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 cutting edges
-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Configure nowStarting from∗ ： 78.99 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 3-flute, 45° spiral / stub model
MISUMI
[Features]
-Unique chip shape allows flute cutting with a depth of cut equal to that of 2 cutting edges
-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 3-flute, 45° spiral / short model
MISUMI
[Features]
-The 3-flute shape makes it resistant to chatter and can smoothly transition from grooving to slot milling
-Unique chip channel shape enables slot milling with a depth of cut equivalent to 2 flutes
-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 3-flute, 45° spiral / regular model
MISUMI
[Features]
-Radius multi-function cutter
-The 3-flute shape makes it resistant to chatter and can be used continuously from plunging to grooving
-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 flutes
-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-Radius flute is also effective in suppressing chips.- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model
MISUMI
[Features]
-Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 flutes
-The high cutting capacity makes it possible to work at a feed rate more than twice that of a standard cutter
-Long shank is ideal for milling deep cavities
-For ø7 and above, the shank diameter is thinner than the cutting diameter to avoid interference
-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 73.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 4-flute, 45° spiral / stub model
MISUMI
[Features]
-Radius end mill
-Unique shape of chip groove enables cutting of grooves with a depth of cut equal to that of 2 cutting edges
-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-Radius cutting edge is also effective in suppressing chipping
-By adopting a throat length, which is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface and suppress chatter at the same time- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 4-flute, 45° spiral / short model
MISUMI
[Features]
-Multi-function end mill with radius
-Unique chip groove shape allows cutting of grooves with a depth of cut equal to that of 2 flutes
-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 4-flute, 45°, regular model
MISUMI
[Features]
-Radius multi-function cutter
-Unique chip shape enables flute cutting with a depth of cut equal to that of 2 cutting edges
-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast
-Radius cutting edge also effectively suppresses chipping
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, pricing, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 2-flute stub model
MISUMI
[Features]
-Stiffness-oriented design with optimum blade, shank and overall length taking into account processing with shrink fit holder
-Regrindable. Please refer to the "Regrinding Service" page for application procedures, scope of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Configure nowStarting from∗ ： 36.28 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
MISUMI
[Features]
-Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 2-flute / short model
MISUMI
[Features]
-Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 4-flute / stub model
MISUMI
[Features]
-Designed with optimum blade length, shank length and overall length considering processing with shrink holder
-Can be resharpened. Please refer to the "Regrinding Service" page for information on possible applications, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Configure nowStarting from∗ ： 43.32 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 4-flute / stub model
MISUMI
[Features]
-Short cutting edge length with cutting edge radius fitted to a general purpose 4 flute cutter
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 4-flute / short model
MISUMI
[Features]
-Short cutting edge length with cutting edge radius attached to a general purpose cutter with 4 cutting edges
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 4-flute / regular model
MISUMI
[Features]
-Regular cutting edge length with cutting edge radius fitted to a general purpose cutter with 4 cutting edges
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Blade diameter (D)(φ) |
| R Size(mm) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Overall Length (L)(mm) |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Torsion Angle (θ) |
| R Precision(μm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | UNION TOOL | UNION TOOL | OSG | MISUMI | OSG | SANKO MFG | SANDVIK | MISUMI | MISUMI | OSG | OSG | UNION TOOL | NS TOOL | NS TOOL | SANKO MFG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | CBN End MILL (Small-Diameter, 2-Flute, Corner Radius End Mill) CBN-SXR | Carbide Ultra FX Super End Mill (Powerful Type Multi-Function HS Shank) FXS-HS-PKE | TSC series carbide long neck radius end mill, 2-flute, long neck model | MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels | XAL series carbide radius end mill, 3-flute, 45° torsion / regular model | XAL series carbide radius end mill, 4-flute, 45° torsion / regular model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model | TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model | TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model | TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, 3-flute, 45° spiral / short model | TSC series carbide radius end mill, 3-flute, 45° spiral / regular model | TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model | TSC series carbide radius end mill, 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, 4-flute, 45° spiral / short model | TSC series carbide radius end mill, 4-flute, 45°, regular model | TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model | |||||||||||||||||||||||
| Starting from∗ | 76.10 € *Unit price with basic configuration | 76.38 € *Unit price with basic configuration | 101.29 € *Unit price with basic configuration | - Volume Discount | 122.60 € *Unit price with basic configuration Volume Discount | 85.81 € *Unit price with basic configuration Volume Discount | 109.21 € *Unit price with basic configuration Volume Discount | 18.89 € *Unit price with basic configuration Volume Discount | - Volume Discount | 59.59 € *Unit price with basic configuration Volume Discount | 106.85 € *Unit price with basic configuration Volume Discount | 55.58 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 132.03 € *Unit price with basic configuration | 53.49 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 143.94 € *Unit price with basic configuration Volume Discount | 117.55 € *Unit price with basic configuration Volume Discount | 111.66 € *Unit price with basic configuration Volume Discount | 89.61 € *Unit price with basic configuration Volume Discount | 93.03 € *Unit price with basic configuration Volume Discount | 57.32 € *Unit price with basic configuration Volume Discount | 23.73 € *Unit price with basic configuration Volume Discount | 23.73 € *Unit price with basic configuration Volume Discount | 14.52 € *Unit price with basic configuration Volume Discount | 84.39 € *Unit price with basic configuration Volume Discount | 79.89 € *Unit price with basic configuration Volume Discount | 61.48 € *Unit price with basic configuration Volume Discount | 54.32 € *Unit price with basic configuration Volume Discount | 74.55 € *Unit price with basic configuration Volume Discount | 88.68 € *Unit price with basic configuration Volume Discount | 73.40 € *Unit price with basic configuration Volume Discount | 78.99 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 73.62 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 36.28 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | 43.32 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount |
| Min. Shipping Days | 6 Days | 6 Days | 6 Days | 5 Days | 6 Days | 8 Days | 6 Days | 5 Days | 5 Days | 6 Days | 6 Days | Same day | 6 Days | Same day | 8 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
| Blade diameter (D)(φ) | 2 ～ 12 | 2 ～ 12 | 0.5 ～ 3 | 1 ～ 20 | 6 ～ 12 | 4 ～ 25 | 2 ～ 16 | 3 ～ 20 | 0.2 ～ 6 | 1 ～ 12 | 6 ～ 25 | 0.8 ～ 6 | 0.2 ～ 2 | 1 ～ 6 | 6 ～ 25 | 4 ～ 12 | 4 ～ 20 | 4 ～ 12 | 4 ～ 12 | 2 ～ 6 | 3 ～ 12 | 4 ～ 12 | 1 ～ 12 | 2 ～ 12 | 2 ～ 12 | 3 ～ 12 | 2 ～ 12 | 2 ～ 20 | 4 ～ 16 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 20 | 3 ～ 22 | 3 ～ 12 | 3 ～ 20 | 3 ～ 20 | 2 ～ 12 | 1 ～ 12 | 1 ～ 20 | 2 ～ 12 | 1 ～ 12 | 1 ～ 12 | 1 ～ 12 |
| R Size(mm) | 0.3 ～ 4 | 0.3 ～ 4 | 0.05 ～ 0.5 | 0.1 ～ 3 | 0.5 ～ 1 | 0.5 ～ 3 | 0.2 ～ 3 | 0.1 ～ 3 | 0.05 ～ 1 | 0.1 ～ 3 | 0.2 ～ 3 | 0.05 ～ 1 | 0.02 ～ 0.5 | 0.05 ～ 1 | 0.3 ～ 8 | 0.813 ～ 2.438 | 0.813 ～ 2.607 | 0.813 ～ 2.438 | 0.813 ～ 2.438 | 0.2 ～ 0.5 | 0.2 ～ 2 | 0.2 ～ 2 | 0.1 ～ 3 | 0.5 ～ 2 | 0.5 ～ 2 | 0.75 ～ 3 | 0.5 ～ 2 | 0.5 ～ 3 | 1 ～ 3 | 0.3 ～ 1 | 0.3 ～ 1 | 0.5 ～ 1 | 0.3 ～ 2 | 0.2 ～ 2 | 0.2 ～ 2 | 0.5 ～ 1 | 0.2 ～ 3 | 0.2 ～ 3 | 0.2 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 | 0.3 ～ 1 | 0.1 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 |
| work material | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] |
| Blade length (ℓ)(mm) | 2 ～ 12 | 2 ～ 12 | 0.3 ～ 1.8 | 3 ～ 60 | 9 ～ 18 | 9 ～ 56 | 2 ～ 16 | 8 ～ 38 | 0.16 ～ 12 | 2.5 ～ 26 | 15 ～ 50 | 0.48 ～ 4.8 | 0.08 ～ 1.2 | 0.8 ～ 5 | 20 ～ 75 | 8 ～ 24 | 8 ～ 40 | 8 ～ 24 | 8 ～ 24 | 3 ～ 9 | 16 ～ 38 | 18 ～ 38 | 3 ～ 30 | 2 ～ 12 | 4 ～ 24 | 1.2 ～ 5 | 2 ～ 12 | 4 ～ 40 | 6 ～ 24 | 4.5 ～ 18 | 4.5 ～ 18 | 4.5 ～ 18 | 5 ～ 26 | 5 ～ 56 | 4.5 ～ 30 | 4.5 ～ 18 | 5 ～ 38 | 5 ～ 56 | 3 ～ 18 | 1.5 ～ 18 | 2 ～ 40 | 3 ～ 18 | 1.5 ～ 18 | 2 ～ 24 | 3 ～ 36 |
| Number of flutes(sheet) | 4 | 4 | 2 | 2 | 4 | 4 | 2 ～ 4 | 4 | 2 | 2 | 6 ～ 8 | 4 | 2 | 4 | 4 | 3 | 4 | 3 | 4 | 4 | 3 | 4 | 2 | 3 | 3 | 4 | 4 | 4 | 4 | 3 | 4 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 4 |
| Type | Long-Neck Radius | Long-Neck Radius | Radius | Radius | Radius | Radius | Radius / Long-Neck Radius | Radius | Long-Neck Radius | Radius | Radius | Long-Neck Radius | Radius | Long-Neck Radius | Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | Radius | Radius | Radius | Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | Long-Neck Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius |
| Overall Length (L)(mm) | 45 ～ 75 | 70 ～ 120 | 45 ～ 50 | 45 ～ 125 | 50 ～ 80 | 50 ～ 140 | 57 ～ 150 | 50 ～ 100 | 40 ～ 100 | 40 ～ 110 | 90 ～ 180 | 50 ～ 120 | 48 ～ 53 | 50 ～ 110 | 120 ～ 230 | 50 ～ 100 | 50 ～ 150 | 80 ～ 160 | 80 ～ 160 | 50 | 60 ～ 100 | 60 ～ 100 | 50 ～ 75 | 50 ～ 100 | 50 ～ 100 | 60 ～ 110 | 50 ～ 100 | 50 ～ 130 | 70 ～ 180 | 40 ～ 65 | 40 ～ 65 | 60 ～ 100 | 60 ～ 100 | 60 ～ 130 | 80 ～ 200 | 60 ～ 100 | 60 ～ 110 | 60 ～ 130 | 35 ～ 60 | 40 ～ 75 | 40 ～ 110 | 35 ～ 60 | 40 ～ 75 | 40 ～ 75 | 45 ～ 85 |
| Shank diameter (d)(mm) | 3 ～ 12 | 3 ～ 12 | 4 ～ 6 | 4 ～ 20 | 6 ～ 12 | 4 ～ 25 | 6 ～ 16 | 4 ～ 20 | 4 ～ 6 | 4 ～ 12 | 6 ～ 25 | 4 ～ 6 | 4 | 4 ～ 6 | 6 ～ 25 | 6 ～ 12 | 6 ～ 20 | 6 ～ 12 | 6 ～ 12 | 6 | 6 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 16 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 |
| Underneck length (ℓ1)(mm) | 6 ～ 36 | 6 ～ 36 | 1.5 ～ 6 | 23 ～ 55 | - | - | 4 ～ 42 | - | 1 ～ 40 | - | - | 2 ～ 48 | 0.5 ～ 10 | 2 ～ 48 | - | - | - | 35 ～ 108 | 35 ～ 108 | - | - | - | - | - | - | 7.5 ～ 24 | - | - | - | - | - | 14 ～ 68 | 18 ～ 70 | 26 ～ 92 | 10 ～ 18 | 14 ～ 68 | 18 ～ 73 | 26 ～ 92 | - | 14 ～ 45 | 17 ～ 45 | - | 14 ～ 45 | 17 ～ 45 | 23 ～ 55 |
| Machining Application | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Inclined Cuts | Groove | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Groove | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts |
| Coating | - | For High Hardness (Silicon Group) | - | For High Hardness (Silicon Group) | TiAlN | For General Steels (AlCrN, etc.) | AlTiN | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | TiAlN | TiAlN | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) |
| Torsion Angle (θ) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | - | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | No torsion | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | No torsion | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) |
| R Precision(μm) | - | - | - | ±0.01 ～ ±0.02 | - | 0～+0.04 | - | ±0.02 | ±0.005 ～ ±0.01 | - | - | - | 0.005～-0.005 | 0.005 to -0.005 ～ 0.01～-0.01 | 0～+0.04 | - | - | - | - | ±0.005 | ±0.02 | ±0.02 | ±0.02 | ±0.015 | ±0.015 | ±0.02 | ±0.015 | ±0.015 | ±0.015 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.02 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Blade diameter (D)(φ)
-
R Size(mm)
-
work material
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.44
- 1.5
- 1.6
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 22
- 24
- 25
- 25.5
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 42
- 45
- 48
- 50
- 55
- 56
- 60
- 64
- 75
- 80
- 100
[5-56/1mm Unit(s)]
-
Number of flutes(sheet)
-
Type
- Radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Overall Length (L)(mm)
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Torsion Angle (θ)
-
R Precision(μm)
Brand
CAD data type
-
- 2D
- 3D
Categories related to Carbide Radius End Mills
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.