Carbide Radius End Mills（Torsion Angle (θ)：No torsion）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
SSR200 CBN Super Speed Radius End Mill
NS TOOL
Achieves high-efficiency machining of corner radius due to outstanding CBN durabilityConfigure nowStarting from∗ ： 132.03 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
MISUMI
[Features]
-High rigidity is achieved by using a negative radius and a short cutting edge length with no helix angle, and chatter is suppressed even in pocket corners
-Since the machine has a rear taper, it is possible to perform machining without the peripheral edge hitting the side when machining corners
-Even when machining the bottom side, a single machine can be used from middle finishing to final finishing, achieving a reduction in machining time.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
Configure nowStarting from∗ ： 61.48 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
2-Flute Corner R Short GX-CR-EDS-SF
OSG
Mushroom shape super hard corner radius end mills developed for shrink fitting.Configure nowStarting from∗ ： 56.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Corner R Short, CBN-CR-EDS
OSG
2-flute CBN-CR-EDS with short corner radius
-shows high performance in machining high-strength materials.Configure nowStarting from∗ ： 187.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute, for Aluminum Alloy, CA-MFE-SF
OSG
Strain generation is suppressed by the R-flange of the shaft.
Material aluminium/copper
Coating: Uncoated, Standard/Alteration category: Manufacturer's standard product, Corner/ball radius (mm) 1
Number of grooves (pcs.) 3.Configure nowStarting from∗ ： 126.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WX21 Carbide End Mill (Super Radius), WX-CRE
OSG
New type of radius end mill that achieves high efficiency in roughing of mold. Performs high-efficiency direct carving of hardened steel.- Volume Discount
Configure nowStarting from∗ ： 89.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cermet End Mill (for Bottom Surface Finishing), FX-MCF
OSG
End mills dedicated to bottom surface finishing, adopted cermet base metal plus FX coating. Stunning high-speed mirror finish machining.Configure nowStarting from∗ ： 94.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2
KYOWA SEIKO
[Specifications]
· Shape: Radius End Mill (carbide)
· Material: PCD Polycrystalline Diamond
· Work materials: For carbide alloy machining
[Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined CuttingConfigure nowStarting from∗ ： 698.78 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Blade diameter (D)(φ) |
| R Size(mm) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Overall Length (L)(mm) |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Torsion Angle (θ) |
| R Precision(μm) |
|
|
|
|
|
|
|
| |
| Brand | NS TOOL | MISUMI | OSG | OSG | OSG | OSG | OSG | KYOWA SEIKO |
| Product Series | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade | PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2 | ||||||
| Starting from∗ | 132.03 € *Unit price with basic configuration | 61.48 € *Unit price with basic configuration Volume Discount | 56.95 € *Unit price with basic configuration | 187.96 € *Unit price with basic configuration | 126.21 € *Unit price with basic configuration | 89.60 € *Unit price with basic configuration Volume Discount | 94.84 € *Unit price with basic configuration | 698.78 € *Unit price with basic configuration |
| Min. Shipping Days | 6 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days |
| Specifications |
| |||||||
| Blade diameter (D)(φ) | 0.2 ～ 2 | 3 ～ 12 | 10 ～ 20 | 3 ～ 6 | 18 ～ 22 | 2 ～ 13 | 6 ～ 20 | 0.5 ～ 2 |
| R Size(mm) | 0.02 ～ 0.5 | 0.75 ～ 3 | 0.5 ～ 1 | 0.2 ～ 2 | 1 | 0.5 ～ 3 | 0.1 ～ 0.4 | - |
| work material | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Cast Iron[○] | Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] | - |
| Blade length (ℓ)(mm) | 0.08 ～ 1.2 | 1.2 ～ 5 | 10 ～ 20 | 3 ～ 6 | 18 ～ 22 | 0.8 ～ 5.5 | 0.9 ～ 3.2 | 0.5 ～ 1.5 |
| Number of flutes(sheet) | 2 | 4 | 2 | 2 | 3 | 3 ～ 4 | 4 | 2 |
| Type | Radius | High-Feed Radius | Radius | Radius | Radius | Radius | Radius | Radius |
| Overall Length (L)(mm) | 48 ～ 53 | 60 ～ 110 | 32 ～ 58 | 45 ～ 50 | 51 ～ 60 | 60 ～ 110 | 90 ～ 160 | 50 |
| Shank diameter (d)(mm) | 4 | 6 ～ 12 | 6 ～ 12 | 6 | 10 ～ 12 | 6 ～ 12 | 6 ～ 20 | 4 |
| Underneck length (ℓ1)(mm) | 0.5 ～ 10 | 7.5 ～ 24 | - | - | - | 5 ～ 24 | 9 ～ 30 | - |
| Machining Application | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Inclined Cuts |
| Coating | Non-Coated | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | Non-Coated | Non-Coated | TiAlN | TiAlN | Non-Coated |
| Torsion Angle (θ) | No torsion | No torsion | No torsion | No torsion | No torsion | No torsion | No torsion | No torsion |
| R Precision(μm) | 0.005～-0.005 | ±0.02 | - | - | - | - | - | - |
Loading...
Filter by:
-
Blade diameter (D)(φ)
-
R Size(mm)
-
work material
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.44
- 1.5
- 1.6
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 22
- 24
- 25
- 25.5
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 42
- 45
- 48
- 50
- 55
- 56
- 60
- 64
- 75
- 80
- 100
-
Number of flutes(sheet)
-
Type
- Radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Overall Length (L)(mm)
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Torsion Angle (θ)
-
R Precision(μm)
Brand
-
- OSG (5)
- KYOWA SEIKO (1)
- NS TOOL (1)
- OKAZAKI SEIKO (0)
- DIJET (0)
- SPEED TIGER (0)
- SANDVIK (0)
- ATOM (0)
- WATERMILLS (0)
- UNION TOOL (0)
- VAN_HOORN (0)
- SANKO MFG (0)
- TAIYO-TOOL (0)
- NACHI(FUJIKOSHI) (0)
- 7 LEADERS (0)
- THE CUT (0)
- GUHRING (0)
CAD data type
-
- 2D
- 3D
Categories related to Carbide Radius End Mills
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.