Registar

Estamos a traduzir a nossa loja para português! 

Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Categoria
Ver mais
Condições de filtragem

Limpar tudo

  • Estoque
  • Blade diameter (D)(φ)
  • R Size(mm)
    [0.1-3/0.1mm unidades]
  • work material
  • Blade length (ℓ)(mm)
    [5-36/1mm unidades]
  • Number of flutes(sheet)
  • Type
  • Fabricante

    • Carbide Radius End Mills (Torsion Angle (θ): Standard Helix (30˚ to 40˚))

    74 itens
    * Informações sobre dias de expedição, custos de expedição e preços
    Lista
    Foto
    Comparar especificações
  • 1
  • 2
  • Seguinte
    • HLRS 4-Flute Long-Neck Radius
      • DESCONTO

      UNION TOOL

      HLRS 4-Flute Long-Neck Radius

      [Features]· Long neck radius shape that exhibits power in high-performance and high-quality machining· Rigidity-oriented blade shape provides long life even when machining high hardness materials· Capable of stable machining for both dry and wet type· New HARDMAX coating adopted to improve oxidation resistance.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.8 ～ 60.05 ～ 1General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Cast Iron[○] / Copper[○]0.48 ～ 4.84Long-Neck Radius50 ～ 1204 ～ 62 ～ 48
      Preço (excluindo IVA) a partir de:
      55.58 €
      Preço especial
      Data de envio regular:
      Item em stock: 1 dia útil
      Alguns artigos podem ser enviados no próprio dia
      Configurar
    • HLRS2000 HM Coated 2 Flute Long-Neck Radius
      • DESCONTO
      • Volume Discount

      UNION TOOL

      HLRS2000 HM Coated 2 Flute Long-Neck Radius

      [Features]· Long neck radius shape that exhibits power in high-performance and high-quality machining· Capable of cutting everything from raw materials to high-hardness materials· Capable of stable, long-life machining for both dry and wet type
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.4 ～ 60.05 ～ 1General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]0.4 ～ 62Long-Neck Radius50 ～ 1204 ～ 61 ～ 60
      Preço (excluindo IVA) a partir de:
      43.45 €
      Preço especial
      Data de envio regular:
      Item em stock: 1 dia útil
      Alguns artigos podem ser enviados no próprio dia
      Configurar
    • CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut
      • Volume Discount

      SANDVIK

      CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut

      Unique shape exhibits high performance
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 160.2 ～ 3General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC60[○]2 ～ 162 ～ 4Radius / Long-Neck Radius57 ～ 1506 ～ 164 ～ 42
      Preço (excluindo IVA) a partir de:
      105.98 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • Power Radius End Mill MSXH440R
      • Volume Discount

      NS TOOL

      Power Radius End Mill MSXH440R

      Adopts powered-up unequal leads and large unequal divisions to suppress chatter and realize stable machining
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.3 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]8 ～ 264Radius60 ～ 806 ～ 12-
      Preço (excluindo IVA) a partir de:
      69.81 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • XAL series carbide radius end mill, 2-flute / short model
      • Volume Discount
      • XAL
      • General Steel
      • 2 Flutes

      MISUMI

      XAL series carbide radius end mill, 2-flute / short model

      Radius end mills are available at low prices
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]3 ～ 302Radius50 ～ 754 ～ 12-
      Preço (excluindo IVA) a partir de:
      14.52 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • XAL series carbide radius end mill, 4-flute / short model
      • Volume Discount
      • XAL
      • General Steel
      • 4 Flutes

      MISUMI

      XAL series carbide radius end mill, 4-flute / short model

      The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 200.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]8 ～ 384Radius50 ～ 1004 ～ 20-
      Preço (excluindo IVA) a partir de:
      18.89 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide long neck radius end mill, 2-flute, long neck model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes

      MISUMI

      TSC series carbide long neck radius end mill, 2-flute, long neck model

      Long neck radius that can be used as a ball and allows a large pick feed
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.2 ～ 60.05 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.16 ～ 122Long-Neck Radius40 ～ 1004 ～ 61 ～ 40
      Data de envio regular:
      5 dias úteis
      Configurar
    • 3-Flute, Corner R Short for Steel / Aluminum Alloy CA-CR-ETS
      • Volume Discount

      OSG

      3-Flute, Corner R Short for Steel / Aluminum Alloy CA-CR-ETS

      Even in machining of aluminum parts with high cutting removal rate, performs chip discharge ability excellent in creating of unique groove form, at the same time achieving significant depth of cut and high feed.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      6 ～ 120.5 ～ 2Aluminum[◎] / Copper[◎] / Resin[○]13 ～ 263Radius50 ～ 756 ～ 12-
      Preço (excluindo IVA) a partir de:
      66.10 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius
      • DESCONTO

      UNION TOOL

      HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius

      [Features]· Long neck radius shape that exhibits power in high-performance and high-quality machining· Capable of cutting everything from raw materials to high-hardness materials· Capable of stable, long-life machining for both dry and wet type
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.2 ～ 60.05 ～ 1General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Copper[◎]0.2 ～ 62Long-Neck Radius50 ～ 1004 ～ 60.5 ～ 30
      Preço (excluindo IVA) a partir de:
      60.34 €
      Preço especial
      Data de envio regular:
      Item em stock: 1 dia útil
      Alguns artigos podem ser enviados no próprio dia
      Configurar
    • CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730
      • Volume Discount

      SANDVIK

      CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730

      [Features]· Twice the cutting depth that was conventionally possible· Ideal for everything from shoulder cutting to full grooving.· With reinforced edge lines, assures long product life even with intense machining.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      -0.5 ～ 2General Steel[○] / Cast Iron[○]-4Radius57 ～ 726 ～ 12-
      Preço (excluindo IVA) a partir de:
      111.93 €
      Data de envio regular:
      8 dias úteis
      Configurar
    • TSC series carbide radius end mill, 4-flute / stub model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 4-flute / stub model

      A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 60.2 ～ 0.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 94Radius506-
      Preço (excluindo IVA) a partir de:
      59.74 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide radius end mill, 2-flute stub model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 2-flute stub model

      [Features] -Stiffness-oriented design with optimum blade, shank and overall length taking into account processing with shrink fit holder-Regrindable. Please refer to the "Regrinding Service" page for application procedures, scope of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 120.2 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 182Radius35 ～ 604 ～ 12-
      Preço (excluindo IVA) a partir de:
      34.89 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

      [Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ～ 182Radius40 ～ 754 ～ 1214 ～ 45
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide radius end mill, 2-flute / short model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, 2-flute / short model

      [Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 200.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ～ 402Radius40 ～ 1104 ～ 2017 ～ 45
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide radius end mill, 2-flute / regular model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide radius end mill, 2-flute / regular model

      [Features]General 2-flute cutter with regular flute length and flute radius-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 200.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 602Radius45 ～ 1254 ～ 2023 ～ 55
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide radius end mill, 4-flute / stub model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 4-flute / stub model

      [Features] -Designed with optimum blade length, shank length and overall length considering processing with shrink holder-Can be resharpened. Please refer to the "Regrinding Service" page for information on possible applications, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 120.3 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 184Radius35 ～ 604 ～ 12-
      Preço (excluindo IVA) a partir de:
      45.06 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide radius end mill, 4-flute / stub model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 4-flute / stub model

      [Features] -Short cutting edge length with cutting edge radius fitted to a general purpose 4 flute cutter-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ～ 184Radius40 ～ 754 ～ 1214 ～ 45
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide radius end mill, 4-flute / short model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, 4-flute / short model

      [Features] -Short cutting edge length with cutting edge radius attached to a general purpose cutter with 4 cutting edges-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ～ 244Radius40 ～ 754 ～ 1217 ～ 45
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide radius end mill, 4-flute / regular model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide radius end mill, 4-flute / regular model

      [Features] -Regular cutting edge length with cutting edge radius fitted to a general purpose cutter with 4 cutting edges-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 364Radius45 ～ 854 ～ 1223 ～ 55
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide long neck radius end mill, 4-flute / long neck model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes

      MISUMI

      TSC series carbide long neck radius end mill, 4-flute / long neck model

      [Features] -Radius (R)-accuracy of ±5 µm (compared to manufacturer's measurements) enables high-precision milling of deep cavities-By adopting 4-spiral shape, it is possible to work with high feed setting compared to 2-spiral shape-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 60.05 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ～ 124Long-Neck Radius40 ～ 1004 ～ 63 ～ 40
      Data de envio regular:
      5 dias úteis
      Configurar
    • TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes

      MISUMI

      TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

      [Features] -Suppresses chattering with a short flute length and a tapered shape at the peripheral edge-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.2 ～ 30.05 ～ 0.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.16 ～ 62Tapered neck radius40 ～ 1004 ～ 61 ～ 60
      Data de envio regular:
      5 dias úteis
      Configurar
    • Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model
      • Volume Discount
      • DIA
      • Graphite
      • 4 Flutes
      • Long

      MISUMI

      Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model

      The diamond coated radius shape that's ideal for shaping graphite
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      6 ～ 120.5 ～ 3Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]30 ～ 604Radius150 ～ 2006 ～ 1260 ～ 85
      Preço (excluindo IVA) a partir de:
      166.75 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model
      • Volume Discount
      • Non-Coated
      • Resin
      • 2 Flutes
      • R (Regular)

      MISUMI

      Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model

      Small radius type that prevents cutter marks on resin
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 100.2Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]3 ～ 302Radius50 ～ 803 ～ 10-
      Preço (excluindo IVA) a partir de:
      44.46 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
      • Non-Coated
      • General Steel

      MISUMI

      Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

      [Features] -Alteration cutter that can determine the radius of the carbide cutter in 0.1 mm increments-Can be reground. Please refer to the "Regrinding service" page for information on possible applications, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 200.1 ～ 3General Steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4 ～ 602 ～ 4Radius40 ～ 1254 ～ 20-
      Data de envio regular:
      7 dias úteis
      Configurar
    • DLC Mill, Radius 2DLCM-R
      • Volume Discount

      NACHI(FUJIKOSHI)

      DLC Mill, Radius 2DLCM-R

      End-mill for aluminum and copper alloys. R part processing of corner of the groove is possible.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      30.2Aluminum[◎] / Copper[○]82Radius456-
      Preço (excluindo IVA) a partir de:
      95.67 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • GS MILL radius GS4-R
      • Volume Discount

      NACHI(FUJIKOSHI)

      GS MILL radius GS4-R

      Suitable for corner R machining and high-speed contouring of molds and machine parts.
      Ler mais
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 100.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]7.5 ～ 224Radius45 ～ 706 ～ 10-
      Preço (excluindo IVA) a partir de:
      100.51 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • 2-Flute Corner R Short FX-CR-EDS-6

        OSG

        2-Flute Corner R Short FX-CR-EDS-6

        Corner Radius End Mill for high-speed machining that sufficiently exhibits performance of high-speed, high-precision machining center.
        Ler mais
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        0.5 ～ 2.50.1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]0.7 ～ 3.72Radius5061.5 ～ 5
        Preço (excluindo IVA) a partir de:
        65.64 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • 2-Flute Corner R Short FX-CR-MG-EDS
        • Volume Discount

        OSG

        2-Flute Corner R Short FX-CR-MG-EDS

        Long shank type that can be used to process deep sections. Can also be used as a corner chipping prevention mechanism.
        Ler mais
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        2 ～ 40.1 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]6 ～ 112Radius40 ～ 704 ～ 6-
        Preço (excluindo IVA) a partir de:
        87.51 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • 2-Flute, Corner R Long, FX-CR-MG-EDL

          OSG

          2-Flute, Corner R Long, FX-CR-MG-EDL

          Long shank type that can be used to process deep sections. Can also be used as a corner chipping prevention mechanism.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          16 ～ 202General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]48 ～ 562Radius140 ～ 16016 ～ 20-
          Preço (excluindo IVA) a partir de:
          548.08 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Heavy-Duty, Multifunction for 3-Flute Steel / Aluminum Alloy CA-PKE
          • Volume Discount

          OSG

          Heavy-Duty, Multifunction for 3-Flute Steel / Aluminum Alloy CA-PKE

          Supports variety of cutter paths from roughing to finish machining, due to short blade of high rigidity and neck relief type.
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          121Aluminum[◎] / Copper[◎] / Resin[○]183Radius9012-
          Preço (excluindo IVA) a partir de:
          191.40 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • 4-Blade Unequal Reed Corner R Short, Heavy-Duty Cutting Type NEO-CR-PHS
          • Volume Discount

          OSG

          4-Blade Unequal Reed Corner R Short, Heavy-Duty Cutting Type NEO-CR-PHS

          Suppressing chatter due to the effect of evolutionary "unequal lead".
          Ler mais
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          3 ～ 100.2 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]6 ～ 204Radius50 ～ 706 ～ 10-
          Preço (excluindo IVA) a partir de:
          109.70 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Corner Long Shank for 2-Flute Graphite DIA-LS-CRED

            OSG

            Corner Long Shank for 2-Flute Graphite DIA-LS-CRED

            Thin standing wall processing tool for graphite electrode. Step processing compatibility prevents chatter mark and edge chipping. Radius blade is on the shank side as well.
            Ler mais
            Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
            5 ～ 110.3 ～ 1Graphite[◎]10 ～ 222Radius100 ～ 1804 ～ 10-
            Preço (excluindo IVA) a partir de:
            160.88 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • Powerful Type Multi-Function DLC-PKE

              OSG

              Powerful Type Multi-Function DLC-PKE

              Ultra-smooth DLC coating does high-speed machining of aluminum, and of course, semi-dry processing.
              Ler mais
              Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
              3 ～ 200.5 ～ 3Aluminum[◎] / Copper[○] / Resin[◎]4.5 ～ 303Radius50 ～ 1256 ～ 20-
              Preço (excluindo IVA) a partir de:
              76.90 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • Carbide End Mill (Multi-Flute Unequal Lead Corner R Short) NEO-CR-EMS
              • Volume Discount

              OSG

              Carbide End Mill (Multi-Flute Unequal Lead Corner R Short) NEO-CR-EMS

              Suppressing chatter due to the effect of evolutionary "unequal lead".
              Ler mais
              Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
              80.3 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]166Radius608-
              Preço (excluindo IVA) a partir de:
              171.80 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • 2-Flute, 4-Blade Pencil Neck / Long Neck Corner R DG-CPR

                OSG

                2-Flute, 4-Blade Pencil Neck / Long Neck Corner R DG-CPR

                The radius of the carbide cutter is suitable for diamond coating of graphite.
                Ler mais
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                0.5 ～ 120.1 ～ 1Graphite[◎]0.9 ～ 122 ～ 4Long-Neck Radius50 ～ 1504 ～ 124 ～ 60
                Preço (excluindo IVA) a partir de:
                89.92 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Carbide End Mill WX Super Coating (High Precision Bull Nose) WXS-CPR
                • Volume Discount

                OSG

                Carbide End Mill WX Super Coating (High Precision Bull Nose) WXS-CPR

                High-precision bull nose (radius) end mill for shape machining of mold. Performs also high-speed cutting of hardened steel due to WXS coating with excellent heat resistance.
                Ler mais
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                0.4 ～ 40.05 ～ 0.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎]0.3 ～ 42 ～ 4Long-Neck Radius50 ～ 704 ～ 61 ～ 20
                Preço (excluindo IVA) a partir de:
                72.80 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • NSR-2 Radius End Mill
                • Volume Discount

                NS TOOL

                NSR-2 Radius End Mill

                Straight and corner rounding processing can be performed at the same time. Outstanding corner radius precision
                Ler mais
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                1 ～ 60.2 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]3 ～ 182Radius45 ～ 604 ～ 6-
                Preço (excluindo IVA) a partir de:
                79.89 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • MSRS230 MUGEN-COATING 2-Flute Radius End Mill
                • DESCONTO
                • Volume Discount

                NS TOOL

                MSRS230 MUGEN-COATING 2-Flute Radius End Mill

                Straight and corner rounding processing can be performed at the same time.
                Ler mais
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                1 ～ 50.1 ～ 1.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]2 ～ 102Radius60 ～ 704 ～ 6-
                Preço (excluindo IVA) a partir de:
                67.97 €
                Preço especial
                Data de envio regular:
                Item em stock: 1 dia útil
                Alguns artigos podem ser enviados no próprio dia
                Configurar
              • MSTNR230 MUGEN-COATING Long Tapered Neck Radius End Mill
                • Volume Discount

                NS TOOL

                MSTNR230 MUGEN-COATING Long Tapered Neck Radius End Mill

                Suppresses chattering for stable high-speed cutting and improved finish surfaces for everything from semi-rough to high-precision finish machining
                Ler mais
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                0.2 ～ 30.05 ～ 0.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.15 ～ 2.52Tapered neck radius50 ～ 1104 ～ 61 ～ 60
                Preço (excluindo IVA) a partir de:
                77.16 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • MHR230R MUGEN-COATING 2-Flute Long Neck Radius End Mill
                • DESCONTO
                • Volume Discount

                NS TOOL

                MHR230R MUGEN-COATING 2-Flute Long Neck Radius End Mill

                The tuned Infinity coating is effective for machining quenched and tempered steel, making it ideal for processing copper electrodes
                Ler mais
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                0.2 ～ 60.05 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.15 ～ 92Long-Neck Radius45 ～ 1104 ～ 60.5 ～ 48
                Preço (excluindo IVA) a partir de:
                44.13 €
                Preço especial
                Data de envio regular:
                Item em stock: 1 dia útil
                Alguns artigos podem ser enviados no próprio dia
                Configurar
              • MHRH230R MUGEN-COATING PREMIUM 2-Flute Long Neck Radius End Mill for Hardened Steels
                • DESCONTO
                • Volume Discount

                NS TOOL

                MHRH230R MUGEN-COATING PREMIUM 2-Flute Long Neck Radius End Mill for Hardened Steels

                The Infinity Coating Premium for high hardness materials and new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface
                Ler mais
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                0.2 ～ 0.90.05 ～ 0.2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]0.15 ～ 0.72Long-Neck Radius45 ～ 5040.5 ～ 8
                Preço (excluindo IVA) a partir de:
                51.48 €
                Preço especial
                Data de envio regular:
                Item em stock: 1 dia útil
                Alguns artigos podem ser enviados no próprio dia
                Configurar
              • CPRS30N Two-Flute Long-Neck Radius for Processing Aluminum / Resin, 30° Torsion

                  UNION TOOL

                  CPRS30N Two-Flute Long-Neck Radius for Processing Aluminum / Resin, 30° Torsion

                  [Features]· For Machining Aluminum/Resin· Non-Coated Long-Neck Radius· Surface roughness was emphasized in the design of this tool
                  Ler mais
                  Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                  4 ～ 100.3 ～ 0.8Aluminum[◎] / Copper[○] / Resin[◎]5 ～ 122Long-Neck Radius50 ～ 806 ～ 1010 ～ 36
                  Preço (excluindo IVA) a partir de:
                  54.21 €
                  Data de envio regular:
                  9 dias úteis
                  Configurar
                • CRS40HSP High Efficiency 3-Flute Long Neck Radius 40° Twist

                    UNION TOOL

                    CRS40HSP High Efficiency 3-Flute Long Neck Radius 40° Twist

                    [Features]· High Efficiency 3-Flute Long Neck Radius (Short Blade)· 40° Torsion· Supports materials from SUS to pre-hardened and hardened steel (60 HRC)
                    Ler mais
                    Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                    3 ～ 120.1 ～ 0.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Graphite[○] / Resin[○]4 ～ 153Long-Neck Radius38 ～ 1203 ～ 127 ～ 54
                    Preço (excluindo IVA) a partir de:
                    70.40 €
                    Data de envio regular:
                    9 dias úteis
                    Configurar
                  • X Coated Radius End Mill for Trapezoidal Runner NERR-2X
                    • Volume Discount

                    NS TOOL

                    X Coated Radius End Mill for Trapezoidal Runner NERR-2X

                    An end mill with a rounded bottom corner of the trapezoidal cursor.Tool material, ultra fine grain carbideHelix angle, 30°Surface treatment, X-coatingNumber of cutting edges: 2Machining applications: Grooving, side machining, machining of flat surfacesCorner shape: radius.
                    Ler mais
                    Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                    2 ～ 60.3 ～ 5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]5 ～ 122Tapered neck radius45 ～ 754 ～ 12-
                    Preço (excluindo IVA) a partir de:
                    113.48 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • MSRS430 MUGEN-COATING 4-Flute Radius End Mill
                    • Volume Discount

                    NS TOOL

                    MSRS430 MUGEN-COATING 4-Flute Radius End Mill

                    Straight and corner rounding processing can be performed at the same time.
                    Ler mais
                    Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                    6 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]12 ～ 244Radius80 ～ 1106 ～ 12-
                    Preço (excluindo IVA) a partir de:
                    109.63 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                • 1
                • 2
                • Seguinte

                  • O produto que procura não se encontra aqui?

                  Produtos recentemente visualizados

                  Categorias relacionadas com Carbide Radius End Mills