Carbide Radius End Mills

• 

  Radius End Mills (Carbide) (143)

• 

  Long Neck Radius End Mills (Carbide) (46)

• 

  UNION TOOL

  HRRS, HM Coated 4-Flute Short Shank Radius

  [Features]· Unique corner rounding creates larger cutting depth and pick feed than with a ball· The seamless corner radius shape reduces cutting resistance and chattering· High hardness materials up to 65 HRC can also be machined

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 12	0.3 ～ 4	Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Cast Iron[○]	2 ～ 12	4	Long-Neck Radius	45 ～ 75	3 ～ 12	6 ～ 36

  Preço (excluindo IVA) a partir de:

  76.10 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • DESCONTO

  UNION TOOL

  HLRS 4-Flute Long-Neck Radius

  [Features]· Long neck radius shape that exhibits power in high-performance and high-quality machining· Rigidity-oriented blade shape provides long life even when machining high hardness materials· Capable of stable machining for both dry and wet type· New HARDMAX coating adopted to improve oxidation resistance.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  0.8 ～ 6	0.05 ～ 1	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Cast Iron[○] / Copper[○]	0.48 ～ 4.8	4	Long-Neck Radius	50 ～ 120	4 ～ 6	2 ～ 48

  Preço (excluindo IVA) a partir de:

  55.58 €～

  Preço (excluindo IVA) a partir de:

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  SANDVIK

  CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut

  Unique shape exhibits high performance

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 16	0.2 ～ 3	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC60[○]	2 ～ 16	2 ～ 4	Radius / Long-Neck Radius	57 ～ 150	6 ～ 16	4 ～ 42

  Preço (excluindo IVA) a partir de:

  105.98 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  UNION TOOL

  HLRS2000 HM Coated 2 Flute Long-Neck Radius

  [Features]· Long neck radius shape that exhibits power in high-performance and high-quality machining· Capable of cutting everything from raw materials to high-hardness materials· Capable of stable, long-life machining for both dry and wet type

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  0.4 ～ 6	0.05 ～ 1	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	0.4 ～ 6	2	Long-Neck Radius	50 ～ 120	4 ～ 6	1 ～ 60

  Preço (excluindo IVA) a partir de:

  43.45 €～

  Preço (excluindo IVA) a partir de:

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  OSG

  EPL-HP-4FL, Carbide end mill

  Carbide end mill - For general applications - 4 flutes, variable helix and unequal spacing, corner radius - Weldon shank

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  42.20 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  OSG

  Cermet End Mill (for Bottom Surface Finishing), FX-MCF

  End mills dedicated to bottom surface finishing, adopted cermet base metal plus FX coating. Stunning high-speed mirror finish machining.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  8	0.1	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○]	1.2	4	Radius	100	8	12

  Preço (excluindo IVA) a partir de:

  101.83 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  VAC Series Carbide 4-Flute Uneven Lead Radius End Mill

  [Features] -Suppresses chatter in uneven pitch and uneven flutes-Stable machining is possible while maintaining finished surface accuracy-Cutting edge radius also enhances cutting edge rigidity-Can machine heat treated steel up to 50HRC-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  1.5 ～ 12	0.2 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	4 ～ 30	4	Radius	50 ～ 150	6 ～ 12	-

  Preço (excluindo IVA) a partir de:

  49.28 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • Non-Coated
  • Aluminum
  • 3 Flutes

  MISUMI

  Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

  Comes with the rounded edge that suppresses machining streaks in standing-wall multi-stage machining

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  5 ～ 22	0.5 ～ 2	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	9 ～ 33	3	Radius	80 ～ 200	4 ～ 20	-

  Preço (excluindo IVA) a partir de:

  109.63 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

  Introducing the long-awaited unequal lead 4-flute radius end mill in the TSC series (helix angle of 40° / 43°)

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 25	0.2 ～ 6.5	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	4 ～ 50	4	Radius	50 ～ 120	6 ～ 25	-

  Preço (excluindo IVA) a partir de:

  47.37 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  UNION TOOL

  CRRS UT Coated 4-Flute Radius

  [Features]· Suitable for everything from raw materials to 55 HRC, the UTCOAT provides a long life· Variable split, high torsion and positive rake angle design enables stable machining· A blade design that reduces the cutting resistance in helical and inclined use, etc.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 12	0.3 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎]	2 ～ 12	4	Long-Neck Radius	60 ～ 120	4 ～ 12	6 ～ 36

  Preço (excluindo IVA) a partir de:

  85.32 €～

  Preço (excluindo IVA) a partir de:

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  OSG

  Uneven Lead End Mill (4 Flutes) for Machining FX Coated Titanium Alloy

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  12 ～ 25	R0 ～ R6	-	24 ～ 50	4	Radius	90 ～ 140	12 ～ 25	36 ～ 75

  Preço (excluindo IVA) a partir de:

  113.10 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  UNION TOOL

  Union Tool Carbide End Mill

  [Features]· Long-neck radius ball-end mill that can cut cemented carbide.· Diamond coating for cemented carbide machining has been developed to achieve outstanding hardness, toughness and adhesive strength.· Phenomenal "deep" cutting has been achieved through adoption of a blade shape optimized for cemented carbide.· Achieves tear-free, excellent machined surfaces, especially from medium rough to finish machining.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  -	-	-	0.75	2	Long-Neck Radius	50	4	-

  Preço (excluindo IVA) a partir de:

  172.18 €

  Data de envio regular:

  7 dias úteis

  Configurar
• 

  • Volume Discount
  • XAL
  • General Steel
  • 4 Flutes

  MISUMI

  XAL series carbide radius end mill, 4-flute / short model

  The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 20	0.1 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	8 ～ 38	4	Radius	50 ～ 100	4 ～ 20	-

  Preço (excluindo IVA) a partir de:

  18.89 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  VAC Series Carbide 2-Flute Radius End Mill

  [Features] -Cutting edge radius also reinforced cutting edge rigid-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can handle heat treated steel up to 50HRC-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 12	0.1 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	2.5 ～ 30	2	Radius	50 ～ 130	6 ～ 12	-

  Preço (excluindo IVA) a partir de:

  49.28 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  OSG

  Powerful Type Multi-Function FXS-PKE

  In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 20	0.2 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	5 ～ 30	4	Radius	60 ～ 160	6 ～ 20	9 ～ 60

  Preço (excluindo IVA) a partir de:

  95.20 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  UNION TOOL

  HRRS, HM Coated 4-Flute Radius

  [Features]· Higher speed and higher precision machining enabled by shortening the total length and reducing the protruding part of the tool· The optimized corner radius size enables processing with larger feed than conventional· Seamless Corner Radius Shape· High hardness materials up to 65 HRC can also be machined

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 12	0.3 ～ 4	Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Cast Iron[○]	2 ～ 12	4	Long-Neck Radius	70 ～ 120	3 ～ 12	6 ～ 36

  Preço (excluindo IVA) a partir de:

  76.38 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • DESCONTO
  • Volume Discount

  NS TOOL

  MSRS230 MUGEN-COATING 2-Flute Radius End Mill

  Straight and corner rounding processing can be performed at the same time.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 5	0.1 ～ 1.5	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	2 ～ 10	2	Radius	60 ～ 70	4 ～ 6	-

  Preço (excluindo IVA) a partir de:

  67.97 €～

  Preço (excluindo IVA) a partir de:

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • DESCONTO
  • Volume Discount

  NS TOOL

  MHR230R MUGEN-COATING 2-Flute Long Neck Radius End Mill

  The tuned Infinity coating is effective for machining quenched and tempered steel, making it ideal for processing copper electrodes

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  0.2 ～ 6	0.05 ～ 1	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.15 ～ 9	2	Long-Neck Radius	45 ～ 110	4 ～ 6	0.5 ～ 48

  Preço (excluindo IVA) a partir de:

  44.13 €～

  Preço (excluindo IVA) a partir de:

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  • Volume Discount

  DIJET

  One Cut Super Radius End Mill DV-OCSRLN

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 16	1 ～ 3	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Cast Iron[○]	6 ～ 24	3	Long-Neck Radius	80 ～ 185	4 ～ 16	20 ～ 120

  Preço (excluindo IVA) a partir de:

  120.58 €～

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  • Volume Discount

  GUHRING

  Unequal Lead End Mill Regular 4-Flute Corner R RF100Ti 3498

  [Features]· The adoption of a shape and coating ideal for titanium and titanium alloy enables high-efficiency machining.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  6 ～ 25	-	-	13 ～ 45	4	Radius	57 ～ 121	6 ～ 25	21 ～ 65

  Preço (excluindo IVA) a partir de:

  100.62 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  KYOWA SEIKO

  PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2

  [Specifications]· Shape: Radius End Mill (carbide)· Material: PCD Polycrystalline Diamond· Work materials: For carbide alloy machining[Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  0.5 ～ 2	-	-	0.5 ～ 1.5	2	Radius	50	4	-

  Preço (excluindo IVA) a partir de:

  671.80 €～

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  • Volume Discount

  KYOWA SEIKO

  End Mill with 2 Carbide Flutes and Corner Radius KSRA-2

  [Features] It can be used for flat surface machining, side machining, curved surface machining, grooving and angular cutting. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  0.5 ～ 3	-	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	1.5 ～ 10	2	Radius	60	3	-

  Preço (excluindo IVA) a partir de:

  108.75 €～

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  • Volume Discount

  SANDVIK

  CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730

  [Features]· Twice the cutting depth that was conventionally possible· Ideal for everything from shoulder cutting to full grooving.· With reinforced edge lines, assures long product life even with intense machining.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  -	0.5 ～ 2	General Steel[○] / Cast Iron[○]	-	4	Radius	57 ～ 72	6 ～ 12	-

  Preço (excluindo IVA) a partir de:

  111.93 €～

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  OSG

  HYP-HS-CRE , Carbide end mill

  Carbide end mill - For hard materials and cast iron - 4 flutes, super radius

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  71.70 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  OSG

  EPL-CPR, Carbide end mill

  Carbide end mill - For general applications - 2 flutes, long neck, corner radius

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  -	-	-	-	-	-	-	-	-

  Preço (excluindo IVA) a partir de:

  71.50 €～

  Data de envio regular:

  4 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  MISUMI

  TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

  Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 12	0.813 ～ 2.438	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	8 ～ 24	3	High-Feed Radius	50 ～ 100	6 ～ 12	-

  Preço (excluindo IVA) a partir de:

  122.52 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

  [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when bottom face is milled, enabling high-speed feed (2) Minimizing cusp height (uncut part) during contour milling reduces the number of average finishing operations-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 20	0.813 ～ 2.607	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	8 ～ 40	4	High-Feed Radius	50 ～ 150	6 ～ 20	-

  Preço (excluindo IVA) a partir de:

  116.38 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  MISUMI

  TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

  [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 12	0.813 ～ 2.438	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	8 ～ 24	3	High-Feed Radius	80 ～ 160	6 ～ 12	35 ～ 108

  Preço (excluindo IVA) a partir de:

  93.37 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

  [Features] -Combined corner radius shape of shoulder R and bottom R, (1) cutting chips are thin when bottom face is milled, enabling high-speed feed (2) minimizing cusp height (uncut part) during contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 12	0.813 ～ 2.438	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	8 ～ 24	4	High-Feed Radius	80 ～ 160	6 ～ 12	35 ～ 108

  Preço (excluindo IVA) a partir de:

  96.97 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, 4-flute / stub model

  A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 6	0.2 ～ 0.5	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	3 ～ 9	4	Radius	50	6	-

  Preço (excluindo IVA) a partir de:

  59.74 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • XAL
  • General Steel
  • 3 Flutes

  MISUMI

  XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

  3-flute 45° helix radius that's resistant to chattering is available at an affordable price

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	0.2 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	16 ～ 38	3	Radius	60 ～ 100	6 ～ 12	-

  Preço (excluindo IVA) a partir de:

  23.73 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • XAL
  • General Steel
  • 4 Flutes

  MISUMI

  XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

  4-Flute Radius for High-Efficiency and High-Speed Machining

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 12	0.2 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	18 ～ 38	4	Radius	60 ～ 100	6 ～ 12	-

  Preço (excluindo IVA) a partir de:

  23.73 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • XAL
  • General Steel
  • 2 Flutes

  MISUMI

  XAL series carbide radius end mill, 2-flute / short model

  Radius end mills are available at low prices

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  1 ～ 12	0.1 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	3 ～ 30	2	Radius	50 ～ 75	4 ～ 12	-

  Preço (excluindo IVA) a partir de:

  14.52 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 3 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

  [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, so that plunge machining is possible-Using stitch grooves that are the same length as the cutting diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-use for engraving, side face, rough and medium grinding.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 12	0.5 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	2 ～ 12	3	High-Feed Radius	50 ～ 100	4 ～ 12	-

  Preço (excluindo IVA) a partir de:

  87.94 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

  [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, allowing plunge-cut machining-Multi-faceted type that can be used for engraving, side face, rough and medium grinding-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 12	0.5 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 24	3	High-Feed Radius	50 ～ 100	4 ～ 12	-

  Preço (excluindo IVA) a partir de:

  83.28 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes

  MISUMI

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

  [Features] -High rigidity is achieved by using a negative radius and a short cutting edge length with no helix angle, and chatter is suppressed even in pocket corners-Since the machine has a rear taper, it is possible to perform machining without the peripheral edge hitting the side when machining corners-Even when machining the bottom side, a single machine can be used from middle finishing to final finishing, achieving a reduction in machining time.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	0.75 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	1.2 ～ 5	4	High-Feed Radius	60 ～ 110	6 ～ 12	7.5 ～ 24

  Preço (excluindo IVA) a partir de:

  64.07 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

  [Features] -High rigidity and cutting sharpness are achieved by the combination of negative cutting edge radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Using stitch grooves that have the same groove length as the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-purpose for engraving, side face, rough and medium finishing-Can be resharpened. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 12	0.5 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	2 ～ 12	4	High-Feed Radius	50 ～ 100	4 ～ 12	-

  Preço (excluindo IVA) a partir de:

  56.61 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

  [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Variable design that can be used for engraving, side faces, coarse and medium finish-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the machine, what services it offers, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  2 ～ 20	0.5 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 40	4	High-Feed Radius	50 ～ 130	4 ～ 20	-

  Preço (excluindo IVA) a partir de:

  77.71 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

  Long neck type with interference prevention can be selected from a number of effective lengths

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  4 ～ 16	1 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 24	4	Long-Neck Radius	70 ～ 180	4 ～ 16	-

  Preço (excluindo IVA) a partir de:

  92.43 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

  [Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	0.3 ～ 1	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	4.5 ～ 18	3	Radius	40 ～ 65	6 ～ 12	-

  Preço (excluindo IVA) a partir de:

  76.51 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

  [Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	0.3 ～ 1	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	4.5 ～ 18	4	Radius	40 ～ 65	6 ～ 12	-

  Preço (excluindo IVA) a partir de:

  82.35 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

  [Features] -Unique chip shape allows flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	0.5 ～ 1	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	4.5 ～ 18	3	Radius	60 ～ 100	6 ～ 12	14 ～ 68

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, 3-flute, 45° spiral / short model

  [Features] -The 3-flute shape makes it resistant to chatter and can smoothly transition from grooving to slot milling-Unique chip channel shape enables slot milling with a depth of cut equivalent to 2 flutes-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 12	0.3 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	5 ～ 26	3	Radius	60 ～ 100	6 ～ 12	18 ～ 70

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  MISUMI

  TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

  [Features] -Radius multi-function cutter-The 3-flute shape makes it resistant to chatter and can be used continuously from plunging to grooving-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 flutes-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Radius flute is also effective in suppressing chips.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 20	0.2 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	5 ～ 56	3	Radius	60 ～ 130	6 ～ 20	26 ～ 92

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

  [Features] -Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 flutes-The high cutting capacity makes it possible to work at a feed rate more than twice that of a standard cutter-Long shank is ideal for milling deep cavities-For ø7 and above, the shank diameter is thinner than the cutting diameter to avoid interference-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
  3 ～ 22	0.2 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	4.5 ～ 30	4	Radius	80 ～ 200	6 ～ 20	10 ～ 18

  Preço (excluindo IVA) a partir de:

  76.72 €～

  Data de envio regular:

  5 dias úteis

  Configurar