Registar

Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Condições de filtragem

Limpar tudo

  • Estoque
  • Blade diameter (D)(φ)
    [2.7-3/0.01φ unidades]
    [3.15-3.5/0.01φ unidades]
    [3.6-4/0.01φ unidades]
    [4.05-16/0.01φ unidades]
    [17-19.99/0.01φ unidades]
    [20.01-22.99/0.01φ unidades]
    [24-25/0.01φ unidades]
  • Blade length (ℓ)(mm)
  • Blade shape type
  • Number of flutes(sheet)
    • High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model
      • Volume Discount
      • Non-Coated
      • 2 Flutes
      • S (Short)

      MISUMI

      High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model

      [Features] -Quick-action steel uncoated, square, short, 2-bladed with up to ø50-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      1 ~ 502.5 ~ 75General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 42Non-Coated
      Preço (excluindo IVA) a partir de:
      10.16 €
      Data de envio regular:
      5 dias úteis
      Configurar
    • Multi-Flute Extra Long EXML
      • Volume Discount

      OSG

      Multi-Flute Extra Long EXML

      30°- 45° helix angle, cobalt high-speed steel, extra long type end mill.
      Ler mais
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      3 ~ 4030 ~ 150General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 32Non-Coated
      Preço (excluindo IVA) a partir de:
      28.84 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • Rough and Finish End Mills RFE
      • Volume Discount

      OSG

      Rough and Finish End Mills RFE

      Rough under-finish end mill uses an unique trapezoidal blade shape that is capable of performing heavy cutting and finish cutting simultaneously. Nicks that are perpendicular to the axis and the flute strength helps withstand heavy cutting.
      Ler mais
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      12 ~ 5040 ~ 120General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 8Cobalt HSSPlane / Side / Groove12 ~ 42Non-Coated
      Preço (excluindo IVA) a partir de:
      74.50 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • V Coated XPM End Mill (Roughing Short Fine-Pitch Type), VP-RESF
      • Volume Discount

      OSG

      V Coated XPM End Mill (Roughing Short Fine-Pitch Type), VP-RESF

      V coating applied powder high speed XPM roughing short blade series. Effective on difficult-to-machine materials.
      Ler mais
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      6 ~ 5011 ~ 75General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]Roughing4 ~ 6Powder high-speed steelPlane / Side / Groove6 ~ 42-
      Preço (excluindo IVA) a partir de:
      60.98 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • 3S End Mill, 4-Flute Extra Long Blade
      • DESCONTO
      • Volume Discount

      FUKUDA

      3S End Mill, 4-Flute Extra Long Blade

      Long blade for cutting such as deep grooving and wide widths Repolishing is easy
      Ler mais
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      3 ~ 6030 ~ 300Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]Square4Alloy HSSPlane / Side / Groove6 ~ 42Non-Coated
      Preço (excluindo IVA) a partir de:
      47.06 €
      Preço especial
      Data de envio regular:
      Item em stock: 1 dia útil
      Alguns artigos podem ser enviados no próprio dia
      Configurar
    • High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short
      • Non-Coated
      • 2 Flutes
      • S (Short)

      MISUMI

      High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short

      [Features] -High-speed steel square cutter with 2 cutting edges and short cutting edge length, where the cutting edge diameter can be specified in 0.01 mm steps-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Ler mais
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      2.7 ~ 258 ~ 50General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 25TiCN / Non-Coated
      Data de envio regular:
      7 dias úteis
      Configurar
    • 2-Flute Extra Long EXDL
      • Volume Discount

      OSG

      2-Flute Extra Long EXDL

      2-flute milling cutter for general purposes in super-long design with cobalt high-speed steel as basic material. Suitable for deep cuts.
      Ler mais
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      3 ~ 4030 ~ 150General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 32Non-Coated
      Preço (excluindo IVA) a partir de:
      26.33 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • 2-Flute General Use, Short EDS
      • DESCONTO
      • Volume Discount

      OSG

      2-Flute General Use, Short EDS

      High speed steel square series.Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copperCoating: Uncoated, Standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2Zerration angle: Standard helix (30 to 44°).
      Ler mais
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      0.45 ~ 601.1 ~ 80General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42Non-Coated
      Preço (excluindo IVA) a partir de:
      15.46 €
      Preço especial
      Data de envio regular:
      Item em stock: 1 dia útil
      Alguns artigos podem ser enviados no próprio dia
      Configurar
    • 2-Flute Long Shank Medium LS-EDN
      • Volume Discount

      OSG

      2-Flute Long Shank Medium LS-EDN

      Long shank, medium diameter, 2 flute cutter made of cobalt high speed steel as the base material. It can be used for machining long projections.
      Ler mais
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      10 ~ 4025 ~ 65General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Inclined Cuts10 ~ 32Non-Coated
      Preço (excluindo IVA) a partir de:
      28.84 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • End Mill (3-Flute General-Purpose Short Type), ETS
      • DESCONTO
      • Volume Discount

      OSG

      End Mill (3-Flute General-Purpose Short Type), ETS

      Short 3 flute cutter for general purpose using cobalt high speed steel as base material.
      Ler mais
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      1 ~ 302.5 ~ 55General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square3Cobalt HSSPlane / Side / Groove / Plunging (Z feed) / Inclined Cuts6 ~ 25Non-Coated
      Preço (excluindo IVA) a partir de:
      18.62 €
      Preço especial
      Data de envio regular:
      Item em stock: 1 dia útil
      Alguns artigos podem ser enviados no próprio dia
      Configurar
    • End Mill (Multi-Flute Center-Cutting Long Type), CC-EML
      • Volume Discount

      OSG

      End Mill (Multi-Flute Center-Cutting Long Type), CC-EML

      4-cutter end mill with centre cut in long design using cobalt high-speed steel as base material. Suitable for deep cuts.
      Ler mais
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      3 ~ 4015 ~ 110General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 32Non-Coated
      Preço (excluindo IVA) a partir de:
      19.92 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • 4-Flute, Long, EX-TIN-EML
      • Volume Discount

      OSG

      4-Flute, Long, EX-TIN-EML

      TIN coating, helix angle 30°, cobalt high speed steel square end-mill.
      Ler mais
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      3 ~ 4015 ~ 110General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 32TiN
      Preço (excluindo IVA) a partir de:
      30.14 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • 3S End Mill, 2-Flute (Standard Blade)
      • DESCONTO
      • Volume Discount

      FUKUDA

      3S End Mill, 2-Flute (Standard Blade)

      Wide range of blade lengths and an abundance of sizes
      Ler mais
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      0.8 ~ 1002 ~ 80Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]Square2Alloy HSSPlane / Side / Groove / Plunging (Z feed)6 ~ 42Non-Coated
      Preço (excluindo IVA) a partir de:
      29.66 €
      Preço especial
      Data de envio regular:
      Item em stock: 1 dia útil
      Alguns artigos podem ser enviados no próprio dia
      Configurar
    • 3S End Mill, 2-Flute Extra Long Blade
      • DESCONTO
      • Volume Discount

      FUKUDA

      3S End Mill, 2-Flute Extra Long Blade

      Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes
      Ler mais
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      0.8 ~ 602.5 ~ 300Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]Square2Alloy HSSPlane / Side / Groove / Plunging (Z feed)6 ~ 42Non-Coated
      Preço (excluindo IVA) a partir de:
      42.27 €
      Preço especial
      Data de envio regular:
      Item em stock: 1 dia útil
      Alguns artigos podem ser enviados no próprio dia
      Configurar
    • 3S End Mill, 6-Flute (Standard Blade)

        FUKUDA

        3S End Mill, 6-Flute (Standard Blade)

        Side cutting and groove re-polishing are easy
        Ler mais
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        50 ~ 10075 ~ 80Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]Square6Alloy HSSPlane / Side / Groove32 ~ 42Non-Coated
        Preço (excluindo IVA) a partir de:
        670.19 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • MT Pattern 2 Flute End Mill SLE-MT (SKH51)

          TAIYO-TOOL

          MT Pattern 2 Flute End Mill SLE-MT (SKH51)

          [Cutting Edge Shape Type]· Square[Tool Grade]· High-speed steel[Coating]· Non-Coated[Flute No.] 2-Flute
          Ler mais
          Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
          1/2 ~ 5130 ~ 65-Square2High-speed steel--Non-Coated
          Preço (excluindo IVA) a partir de:
          94.85 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • V-XPM-WRESF, Powder metal end mill

            OSG

            V-XPM-WRESF, Powder metal end mill

            Powder metal end mill - Multiflute, for roughing, short length of cut - Weldon shank
            Ler mais
            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
            ---------
            Preço (excluindo IVA) a partir de:
            57.10 €
            Data de envio regular:
            4 dias úteis
            Configurar
          • V-WEDS, HSS-Co end mill

              OSG

              V-WEDS, HSS-Co end mill

              HSS-Co end mill - 2 flutes, square, short length of cut - Weldon shank
              Ler mais
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              ---------
              Preço (excluindo IVA) a partir de:
              21.00 €
              Data de envio regular:
              4 dias úteis
              Configurar
            • V-WEMS, HSS-Co end mill

                OSG

                V-WEMS, HSS-Co end mill

                HSS-Co end mill - Multiflute, short length of cut - Weldon shank
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                ---------
                Preço (excluindo IVA) a partir de:
                23.80 €
                Data de envio regular:
                4 dias úteis
                Configurar
              • AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut
                • Volume Discount
                • AS
                • 4 Flutes
                • S (Short)

                MISUMI

                AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut

                The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                6 ~ 3013 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
                Preço (excluindo IVA) a partir de:
                46.54 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut
                • Volume Discount
                • AS
                • 4 Flutes
                • R (Regular)

                MISUMI

                AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut

                The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                6 ~ 3019 ~ 68General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
                Preço (excluindo IVA) a partir de:
                52.20 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut
                • Volume Discount
                • AS
                • 4 Flutes
                • L (Long)

                MISUMI

                AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut

                The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                10 ~ 3045 ~ 90General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts10 ~ 25For High Hardness (Silicon Group)
                Preço (excluindo IVA) a partir de:
                69.77 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut
                • Volume Discount
                • AS
                • 3 Flutes
                • S (Short)

                MISUMI

                AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut

                The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                6 ~ 3011 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
                Preço (excluindo IVA) a partir de:
                57.35 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
                • Volume Discount
                • AS
                • 4 Flutes
                • S (Short)

                MISUMI

                AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

                [Features] -The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                5 ~ 3213 ~ 53General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 32For High Hardness (Silicon Group)
                Preço (excluindo IVA) a partir de:
                44.14 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut
                • Volume Discount
                • AS
                • 4 Flutes
                • R (Regular)

                MISUMI

                AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

                [Features] -The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                6 ~ 3019 ~ 68General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
                Preço (excluindo IVA) a partir de:
                51.92 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut
                • Volume Discount
                • AS
                • 4 Flutes
                • L (Long)

                MISUMI

                AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

                [Features] -The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                10 ~ 3045 ~ 90General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts10 ~ 25For High Hardness (Silicon Group)
                Preço (excluindo IVA) a partir de:
                68.91 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
                • Volume Discount
                • AS
                • 3 Flutes
                • S (Short)

                MISUMI

                AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

                [Features] -The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                6 ~ 3011 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
                Preço (excluindo IVA) a partir de:
                54.09 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
                • Volume Discount
                • TiCN
                • 4 Flutes
                • S (Short)

                MISUMI

                TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

                Powdered HSS with high durability is available more cheaply than the cobalt HSS market price
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                6 ~ 3213 ~ 53General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 32TiCN
                Preço (excluindo IVA) a partir de:
                30.25 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut
                • Volume Discount
                • TiCN
                • 4 Flutes
                • R (Regular)

                MISUMI

                TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

                Powdered HSS with high durability is available more cheaply than the cobalt HSS market price
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                6 ~ 3019 ~ 68General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25TiCN
                Preço (excluindo IVA) a partir de:
                40.05 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut
                • Volume Discount
                • TiCN
                • 4 Flutes
                • L (Long)

                MISUMI

                TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

                [Features] -High-speed steel powder roughing type with long flute length expected to last long-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                10 ~ 3045 ~ 90General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts10 ~ 25TiCN
                Preço (excluindo IVA) a partir de:
                56.01 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
                • Volume Discount
                • TiCN
                • 3 Flutes
                • S (Short)

                MISUMI

                TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

                [Features] -Long shank of high-speed steel powder expected to last a long time-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                6 ~ 3011 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25TiCN
                Preço (excluindo IVA) a partir de:
                53.30 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut
                • Volume Discount
                • AS
                • 4 Flutes
                • S (Short)

                MISUMI

                AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut

                [Features] -High-speed roughing cutter made of steel, which offers both good machining performance and good price-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                5 ~ 5013 ~ 75General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42For High Hardness (Silicon Group)
                Preço (excluindo IVA) a partir de:
                29.75 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut
                • Volume Discount
                • AS
                • 4 Flutes
                • R (Regular)

                MISUMI

                AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut

                [Features] -High-speed roughing cutter made of steel, which offers both good machining performance and good price-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                6 ~ 5019 ~ 112General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42For High Hardness (Silicon Group)
                Preço (excluindo IVA) a partir de:
                37.69 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut
                • Volume Discount
                • AS
                • 4 Flutes
                • L (Long)

                MISUMI

                AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut

                [Features] -High-speed steel roughing cutter that offers both good machining performance and reasonable price-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                10 ~ 5045 ~ 150General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts10 ~ 42For High Hardness (Silicon Group)
                Preço (excluindo IVA) a partir de:
                45.78 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
                • Volume Discount
                • AS
                • 3 Flutes
                • S (Short)

                MISUMI

                AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

                [Features] -High-speed roughing cutter made of steel, which offers both good machining performance and good price-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                6 ~ 3011 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
                Preço (excluindo IVA) a partir de:
                42.12 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model
                • Volume Discount
                • Non-Coated
                • 4 Flutes
                • S (Short)

                MISUMI

                Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model

                [Features] -Uncoated short flutes of high-speed steel powder expected to last a long time-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                5 ~ 3013 ~ 45General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25Non-Coated
                Preço (excluindo IVA) a partir de:
                37.85 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model
                • Volume Discount
                • Non-Coated
                • 4 Flutes
                • R (Regular)

                MISUMI

                Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model

                [Features] -High speed steel powder roughers uncoated with normal flute length, expecting long life-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                6 ~ 3019 ~ 68General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25Non-Coated
                Preço (excluindo IVA) a partir de:
                48.25 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model
                • Volume Discount
                • Non-Coated
                • 4 Flutes
                • L (Long)

                MISUMI

                Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model

                [Features] -High speed steel powder roughing, uncoated, with long flute length expected to last a long time-Suitable for deep cavity milling-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                10 ~ 2545 ~ 90General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4Powder high-speed steelPlane / Side / Groove / Inclined Cuts10 ~ 25Non-Coated
                Preço (excluindo IVA) a partir de:
                68.31 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model
                • Volume Discount
                • Non-Coated
                • 3 Flutes
                • S (Short)

                MISUMI

                Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model

                [Features] -Uncoated long shank blade made of high-speed steel powder for roughing, which can be expected to have a long service life-Suitable for milling deep cavities-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                6 ~ 3011 ~ 45General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25Non-Coated
                Preço (excluindo IVA) a partir de:
                49.15 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model
                • Volume Discount
                • Non-Coated
                • 4 Flutes
                • S (Short)

                MISUMI

                High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model

                [Features] -High-speed steel roughing, uncoated, short flute length with optimum pitch width for rough finishing-Can be reground. Please refer to the "Regrinding Service" page for details of how to proceed, what services you can take advantage of, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                5 ~ 5013 ~ 75General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42Non-Coated
                Preço (excluindo IVA) a partir de:
                21.82 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model
                • Volume Discount
                • Non-Coated
                • 4 Flutes
                • R (Regular)

                MISUMI

                High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model

                [Features] -High-speed steel roughing cutter without coating with regular flute length and optimum pitch width for roughing-Can be reground. Please refer to the "Regrinding Service" page to find out how to proceed, what services you can take advantage of, what the prices are, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                6 ~ 5019 ~ 112General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42Non-Coated
                Preço (excluindo IVA) a partir de:
                30.11 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model
                • Volume Discount
                • Non-Coated
                • 4 Flutes
                • L (Long)

                MISUMI

                High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model

                [Features] -High speed steel roughing cutter with uncoated long flute with optimum pitch width for roughing-Suitable for deep cavity milling-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                10 ~ 5045 ~ 150General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts10 ~ 42Non-Coated
                Preço (excluindo IVA) a partir de:
                37.18 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model
                • Volume Discount
                • Non-Coated
                • 3 Flutes
                • S (Short)

                MISUMI

                High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model

                [Features] -High speed steel roughing cutter with uncoated long shank and optimum pitch width for rough finishing-Suitable for deep cavity milling-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                6 ~ 3011 ~ 45General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 25Non-Coated
                Preço (excluindo IVA) a partir de:
                37.78 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut
                • Volume Discount
                • TiAlN
                • S (Short)

                MISUMI

                TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut

                [Features] -Short flute high-speed steel roughing cutter with standard TiAlN coating-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                5 ~ 3013 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 25TiAlN
                Preço (excluindo IVA) a partir de:
                27.27 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short
                • Volume Discount
                • AS
                • 3 Flutes
                • S (Short)

                MISUMI

                AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short

                [Features] -High-spiral design with excellent machinability, therefore suitable for a wide range of applications from heavy machining to finishing-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.
                Ler mais
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                6 ~ 2515 ~ 50General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Square3Powder high-speed steelPlane / Side / Groove / Inclined Cuts / Countersinking8 ~ 25For High Hardness (Silicon Group)
                Preço (excluindo IVA) a partir de:
                33.72 €
                Data de envio regular:
                5 dias úteis
                Configurar