Square HSS End Mills (Coating: TiCN)

• 

  Square End Mills (HSS) (21)

• 

  Roughing End Mills (HSS) (13)

• 

  High Helix End Mills (HSS) (1)

• 

  • Non-Coated
  • 2 Flutes
  • S (Short)

  MISUMI

  High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short

  [Features] -High-speed steel square cutter with 2 cutting edges and short cutting edge length, where the cutting edge diameter can be specified in 0.01 mm steps-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  2.7 ～ 25	8 ～ 50	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Square	2	Cobalt HSS	Plane / Side / Groove / Countersinking	6 ～ 25	TiCN

  Data de envio regular:

  13 dias úteis

  Configurar
• 

  • Volume Discount
  • TiCN
  • 4 Flutes
  • R (Regular)

  MISUMI

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

  Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  6 ～ 30	19 ～ 68	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Roughing	3 ～ 5	Powder high-speed steel	Plane / Side / Groove / Inclined Cuts	6 ～ 25	TiCN

  Preço regular (excluindo IVA):

  40.05 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Non-Coated
  • 4 Flutes
  • S (Short)

  MISUMI

  High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model

  [Features] -High-speed steel end mill with 4 flanks that can be sized to customer specifications to avoid unwanted tooling interference

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  8 ～ 25	-	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Square	4	Cobalt HSS	Plane / Side / Groove / Countersinking	10 ～ 25	TiCN

  Data de envio regular:

  13 dias úteis

  Configurar
• 

  • Volume Discount
  • TiCN
  • 4 Flutes
  • S (Short)

  MISUMI

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

  Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  6 ～ 32	13 ～ 53	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Roughing	3 ～ 6	Powder high-speed steel	Plane / Side / Groove / Inclined Cuts	6 ～ 32	TiCN

  Preço regular (excluindo IVA):

  30.25 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TiCN
  • 4 Flutes
  • L (Long)

  MISUMI

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

  [Features] -High-speed steel powder roughing type with long flute length expected to last long-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  10 ～ 30	45 ～ 90	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Roughing	4 ～ 5	Powder high-speed steel	Plane / Side / Groove / Inclined Cuts	10 ～ 25	TiCN

  Preço regular (excluindo IVA):

  56.01 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TiCN
  • 3 Flutes
  • S (Short)

  MISUMI

  TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

  [Features] -Long shank of high-speed steel powder expected to last a long time-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  6 ～ 30	11 ～ 45	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Roughing	3 ～ 4	Powder high-speed steel	Plane / Side / Groove / Inclined Cuts	6 ～ 25	TiCN

  Preço regular (excluindo IVA):

  53.30 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TiCN
  • 2 Flutes
  • S (Short)

  MISUMI

  TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short

  [Features] -High-speed steel powder for roughing with short flute length expected to last long-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  1 ～ 40	2.5 ～ 65	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	Square	2	Powder high-speed steel	Plane / Side / Groove / Countersinking	6 ～ 32	TiCN

  Preço regular (excluindo IVA):

  22.43 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TiCN
  • 2 Flutes
  • R (Regular)

  MISUMI

  TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Regular

  [Features] -High speed steel powder for roughing with regular flute length expected to last long-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  1 ～ 25	3.5 ～ 60	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	Square	2	Powder high-speed steel	Plane / Side / Groove / Countersinking	6 ～ 25	TiCN

  Preço regular (excluindo IVA):

  24.30 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TiCN
  • 2 Flutes
  • L (Long)

  MISUMI

  TiCN Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Long

  [Features] -High-speed steel powder roughing cutter with long flute length expected to last a long time-Suitable for milling deep cavities-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  3 ～ 25	15 ～ 90	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	Square	2	Powder high-speed steel	Plane / Side / Groove / Countersinking	6 ～ 25	TiCN

  Preço regular (excluindo IVA):

  17.51 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TiCN
  • 4 Flutes
  • S (Short)

  MISUMI

  TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short

  Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  3 ～ 25	8 ～ 45	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Square	4	Powder high-speed steel	Plane / Side / Groove / Countersinking	6 ～ 25	TiCN

  Preço regular (excluindo IVA):

  18.36 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TiCN
  • 4 Flutes
  • R (Regular)

  MISUMI

  TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

  [Features] -High speed steel powder grinding wheel with regular flute length and 4 flutes expected to last a long time-Coating with excellent lubricity for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  3 ～ 25	12 ～ 68	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Square	4	Powder high-speed steel	Plane / Side / Groove / Countersinking	6 ～ 25	TiCN

  Preço regular (excluindo IVA):

  18.36 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TiCN
  • 4 Flutes
  • L (Long)

  MISUMI

  TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular

  [Features] -High speed steel powder roughing cutter with long flute length and 4 flutes expected to last a long time-Suitable for deep cavity milling-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  3 ～ 25	15 ～ 90	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Square	4	Powder high-speed steel	Plane / Side / Groove / Countersinking	6 ～ 25	TiCN

  Preço regular (excluindo IVA):

  18.36 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Non-Coated
  • 2 Flutes
  • S (Short)

  MISUMI

  High-Speed Steel Corner C End Mill, 2-Flute / Short Model

  [Features] -High-speed steel 2-flute corner chamfer cutter with selectable corner chamfer in 0.1 mm steps-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices etc.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  3 ～ 25	8 ～ 50	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Square	2	Cobalt HSS	Plane / Side / Groove	6 ～ 25	TiCN

  Data de envio regular:

  13 dias úteis

  Configurar
• 

  • Non-Coated
  • 2 Flutes
  • R (Regular)

  MISUMI

  High-Speed Steel Corner C End Mill, 2-Flute / Regular Model

  [Features] -High speed steel cutter with 2 cutting edges and corner chamfer with selectable corner chamfer in 0.1 mm steps-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  3 ～ 25	10 ～ 60	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Square	2	Cobalt HSS	Plane / Side / Groove	6 ～ 25	TiCN

  Data de envio regular:

  13 dias úteis

  Configurar
• 

  • Non-Coated
  • 4 Flutes
  • S (Short)

  MISUMI

  High-Speed Steel Corner C End Mill, 4-Flute / Short Model

  [Features] -High-speed steel 4-flute corner chamfer cutter with selectable corner chamfer in 0.1 mm steps-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  3 ～ 25	8 ～ 45	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Square	4	Cobalt HSS	Plane / Side / Groove	6 ～ 25	TiCN

  Data de envio regular:

  13 dias úteis

  Configurar
• 

  • Non-Coated
  • 4 Flutes
  • R (Regular)

  MISUMI

  High-Speed Steel Corner C End Mill, 4-Flute / Regular Model

  [Features] -High-speed steel 4-flute corner chamfer cutter with selectable corner chamfer in 0.1 mm steps-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  3 ～ 25	12 ～ 68	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Square	4	Cobalt HSS	Plane / Side / Groove	6 ～ 25	TiCN

  Data de envio regular:

  13 dias úteis

  Configurar
• 

  • Non-Coated
  • 2 Flutes
  • S (Short)

  MISUMI

  High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model

  [Features] -High speed steel cutter with 2 flanks, which can be sized to customer requirements to avoid unwanted tool overlap.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  8 ～ 25	-	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Square	2	Cobalt HSS	Plane / Side / Groove / Countersinking	10 ～ 25	TiCN

  Data de envio regular:

  13 dias úteis

  Configurar
• 

  • Non-Coated
  • 2 Flutes
  • R (Regular)

  MISUMI

  High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model

  [Features] -High speed steel reamer with 2 flats that can be made to measure to avoid unwanted tool interference

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  8 ～ 25	-	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Square	2	Cobalt HSS	Plane / Side / Groove / Countersinking	10 ～ 25	TiCN

  Data de envio regular:

  13 dias úteis

  Configurar
• 

  • Non-Coated
  • 4 Flutes
  • R (Regular)

  MISUMI

  High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model

  [Features] -High speed steel cutter with 4 flanks that can be sized to customer requirements to avoid unwanted tooling interference.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  8 ～ 25	-	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Square	4	Cobalt HSS	Plane / Side / Groove / Countersinking	10 ～ 25	TiCN

  Data de envio regular:

  13 dias úteis

  Configurar
• 

  • Non-Coated
  • 2 Flutes
  • R (Regular)

  MISUMI

  High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular

  [Features] -High-speed steel square cutter with 2 cutting edges and regular cutting edge length, where the cutting diameter can be specified in 0.01 mm steps-Can be reground. Please refer to the "Regrinding service" page for information on application procedures, range of services, prices, etc.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  2.7 ～ 24.99	10 ～ 60	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Square	2	Cobalt HSS	Plane / Side / Groove / Countersinking	6 ～ 25	TiCN

  Data de envio regular:

  13 dias úteis

  Configurar
• 

  NACHI(FUJIKOSHI)

  SG-FAX End Mill, 2-Flute 2SGE

  Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  1.5 ～ 21	3 ～ 45	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Square	2	Alloy HSS	Plane / Side / Groove / Inclined Cuts	6 ～ 20	TiCN

  Preço regular (excluindo IVA):

  116.14 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  NACHI(FUJIKOSHI)

  SG-FAX Heavy SGHV

  Performs high efficiency coarse grooving of workpiece materials such as steel, stainless steel and aluminum. Suitable for semi-finishing.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  6 ～ 50	15 ～ 70	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Roughing	4 ～ 6	Alloy HSS	Side / Groove	8 ～ 42	TiCN

  Preço regular (excluindo IVA):

  90.93 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  NACHI(FUJIKOSHI)

  SG-FAX Roughing End Mill, Long Shank, SLX Type SGFREU

  Performs high efficiency coarse grooving of workpiece materials such as steel, stainless steel and aluminum. Fine pitch nick.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  16 ～ 50	32 ～ 75	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Roughing	4 ～ 6	Alloy HSS	Side / Groove	16 ～ 42	TiCN

  Preço regular (excluindo IVA):

  190.01 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  NACHI(FUJIKOSHI)

  SG-FAX Heavy Long SGLHV

  Performs coarse grooving of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for semi-finishing.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  26 ～ 50	90 ～ 145	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Roughing	4 ～ 6	Alloy HSS	Side / Groove	25 ～ 42	TiCN

  Preço regular (excluindo IVA):

  427.91 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  NACHI(FUJIKOSHI)

  SG-FAX Roughing End Mill, Long Shank, SX Type SGFREX

  Performs high efficiency coarse grooving of workpiece materials such as steel, stainless steel and aluminum. Fine pitch nick.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  35	53	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Roughing	6	Alloy HSS	Side / Groove	32	TiCN

  Preço regular (excluindo IVA):

  731.29 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  NACHI(FUJIKOSHI)

  SG-FAX Medium End Mill, 2-Flute 2MSGE

  [Features] A medium-sized end mill with 2 cutting edges.It is suitable for high-speed milling of general steel, stainless steel and aluminium.[Features] Suitable for end milling of general steel, stainless steel, aluminium, etc.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  3	9	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Square	2	Alloy HSS	Plane / Side / Groove / Inclined Cuts	6	TiCN

  Preço regular (excluindo IVA):

  67.29 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  NACHI(FUJIKOSHI)

  SG-FAX Roughing End Mill Long SGFREL

  Performs coarse grooving of workpiece materials from carbon steel and stainless steel to aluminum. Fine pitch nick.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  10	45	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Roughing	3	Alloy HSS	Side / Groove	10	TiCN

  Preço regular (excluindo IVA):

  131.31 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANKO MFG

  SS2T S Coated Estech 2-Flute Short

  2-flute endmill with TiCN coating. Can be used widely for milling of grooves, sides, holes, etc.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  7.4 ～ 20	15 ～ 45	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Square	2	Powder high-speed steel	Plane / Side / Groove / Inclined Cuts	10 ～ 20	TiCN

  Preço regular (excluindo IVA):

  72.13 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANKO MFG

  SS2TM S Coated Estech 2-Flute Regular

  [Features]· 2-flute finishing endmill with TiCN coating.· Can be used widely for milling of grooves, sides, holes, etc.· Enables a wide range of machining applications, due to the regular flute length.· High grade powder metallurgy HSS with S-coating.· Enables a wide range of machining applications, due to the regular flute length.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  3 ～ 5	10 ～ 15	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Square	2	Powder high-speed steel	Plane / Side / Groove / Inclined Cuts	6	TiCN

  Preço regular (excluindo IVA):

  51.67 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANKO MFG

  SS4TL S Coated Estech 4-Flute Long

  [Features]· 4-flute finishing endmill with TiCN coating.· Enables a wide range of side machining and deep engraving, due to the long flute length.· High grade powder metallurgy HSS with S-coating.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  6 ～ 7	35 ～ 40	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Square	4	Powder high-speed steel	Plane / Side	6 ～ 8	TiCN

  Preço regular (excluindo IVA):

  80.95 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANKO MFG

  SSM S Coated Estech Muscle 3-Flute Regular

  [Features]· A high-helical type 3-flute end mill made of high grade powder metallurgy HSS with S-coating.· With a unique roughing blade shape, a wide range of machining from heavy duty cutting to finishing machining is possible

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  9	25	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Square	3	Powder high-speed steel	Plane / Side / Groove / Inclined Cuts	12	TiCN

  Preço regular (excluindo IVA):

  87.89 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANKO MFG

  SSα S Coated Estech α Nick

  Semi-fine pitch type roughing endmill with TiCN coating. Extended periods of machining with hard-to-cut materials are possible.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  5 ～ 10	10 ～ 25	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Roughing	4	Powder high-speed steel	Plane / Side / Groove / Inclined Cuts	6 ～ 10	TiCN

  Preço regular (excluindo IVA):

  84.36 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANKO MFG

  SSαM S Coated Estech α Nick Regular Blade

  [Features]· Semi-fine pitch type roughing endmill with TiCN coating.· Extended periods of machining with hard-to-cut materials are possible.· Enables a wide range of machining applications, due to the regular flute length.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  15	55	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Roughing	4	Powder high-speed steel	Plane / Side / Groove / Inclined Cuts	16	TiCN

  Preço regular (excluindo IVA):

  144.88 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANKO MFG

  S-SUSα S Coated End Mill for Stainless Steel Groove Processing

  Flat nick type roughing endmill with TiCN coating. Ideal for grooving of stainless steel.

  Ler mais

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  30	55	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Titanium[○]	Roughing	4	Cobalt HSS	Groove	25	TiCN

  Preço regular (excluindo IVA):

  293.03 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  NACHI(FUJIKOSHI)

  SG-FAX Heavy Extra-Long SGELHV

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	work material	Blade shape type	Number of flutes(sheet)	Tool Material Type	Machining Application	Shank diameter (d)(mm)	Coating
  30 ～ 50	150 ～ 300	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Square	4 ～ 6	Alloy HSS	Side	32 ～ 42	TiCN

  Preço regular (excluindo IVA):

  1,040.58 €～

  Data de envio regular:

  6 dias úteis

  Configurar