Turning Inserts (página 3)

• 

  KYOCERA

  For Extra Hard Roll Forming

  RBG1/RBG2/RCGX/RPGX

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  Other	Other	-	Cast Iron	-	-	No-hand	-	-

  Preço (excluindo IVA) a partir de:

  26.53 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  KYOCERA

  Diamond Shape 55° / Positive CBN

  DCMW

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  D (55° Diamond-Shape)	Outer Diameter/Inner Diameter	2	High Hardness Material	-	Pozidriv	No-hand	0.2	-

  Preço (excluindo IVA) a partir de:

  80.22 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  KYOCERA

  For Grooving (1 Corner Type) CBN

  Conventional insert mounting to new holders is not recommended.

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  Other	Grooving / Parting	1	High Hardness Material	-	-	Right-hand	0.2	-

  Preço (excluindo IVA) a partir de:

  164.70 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  KYOCERA

  Turning Insert Diamond Negative

  CNMM/DNMM/TNMM/VNMM/WNMM

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape) / D (55° Diamond-Shape) / T (Triangle) / V (35° Diamond-Shaped) / W (Hexagonal Type)	Outer Diameter/Inner Diameter	1	Non-ferrous metal / Heat-resistant alloy, titanium alloy	-	Negative	No-hand	0.2 ～ 0.4	-

  Preço (excluindo IVA) a partir de:

  42.50 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  KYOCERA

  Diamond for Deep Grooving (1 Corner Specification)

  Insert for deep grooving.

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  Other	Grooving / Parting	1	Non-ferrous metal / Heat-resistant alloy, titanium alloy	-	-	No-hand	0.2	-

  Preço (excluindo IVA) a partir de:

  156.45 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  KYOCERA

  Tip Diamond for Small Bores

  Tip bar for small inner diameters.

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  Other	Other	1	Non-ferrous metal / Heat-resistant alloy, titanium alloy	-	-	Right-hand	Other	-

  Preço (excluindo IVA) a partir de:

  113.66 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  KYOCERA

  Inner Diameter Thread Cutting Tip

  60° inner diameter threading insert with flat cutting blade.

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  T (Triangle)	Threading	3	Steel / Stainless Steel	-	Pozidriv	Right-hand	Other	Internal Diameter

  Preço (excluindo IVA) a partir de:

  14.21 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  KYOCERA

  S...KTTX Type (Sleeve Holder for External Diameter) Compatible Tip

  When machining can be performed at many pitches with a single insert, use the TT type.

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  T (Triangle)	Threading	-	Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	-	-	Right-hand	Other	-

  Preço (excluindo IVA) a partir de:

  32.80 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  SANDVIK

  Negative Tip for T-Max P Turning Tool

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	2	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	Finish / Medium grinding	Negative	No-hand	0.4 ～ 1.6	-

  Preço (excluindo IVA) a partir de:

  13.07 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  T-Max Q-Cut Plunging / Grooving CBN Tip

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  Other	Grooving / Parting	1	High Hardness Material	-	-	No-hand	Other	-

  Preço (excluindo IVA) a partir de:

  204.31 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  Positive Tip for T-Max S Turning Tool

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  T (Triangle)	Outer Diameter/Inner Diameter	3	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	-	-	No-hand	0.2 ～ 1.2	-

  Preço (excluindo IVA) a partir de:

  9.65 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  T-Max CBN Tip for Turning

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  V (35° Diamond-Shaped)	Outer Diameter/Inner Diameter	2	High Hardness Material	-	Negative	No-hand	0.8 ～ 1.2	-

  Preço (excluindo IVA) a partir de:

  52.86 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  T-Max Ceramic Tip for Turning

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  D (55° Diamond-Shape)	Outer Diameter/Inner Diameter	2	Cast Iron / Non-ferrous metal / High Hardness Material	-	Negative	No-hand	0.8 ～ 1.2	-

  Preço (excluindo IVA) a partir de:

  23.97 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  CoroCut 1 Plunging / Grooving CBN Tip

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  Other	Grooving / Parting	1	Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	-	-	No-hand	Other	-

  Preço (excluindo IVA) a partir de:

  134.77 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  CoroCut 2 Plunging / Grooving Blank Tip

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  Other	Grooving / Parting	1	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	-	-	No-hand	0.2	-

  Preço (excluindo IVA) a partir de:

  34.73 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  CoroCut MB Grooving Tip for Small Lathe

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  Other	Grooving / Parting	1	Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy	-	-	Left-hand	Other	-

  Preço (excluindo IVA) a partir de:

  38.94 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  Cross-Thread 254 Circlip Grooving Tips

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  T (Triangle)	Grooving / Parting	3	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	-	-	Right-hand	Other	-

  Preço (excluindo IVA) a partir de:

  60.52 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  Cross-Thread 266 Thread Cutting CBN Tip

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  T (Triangle)	Threading	1	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy	-	-	Right-hand	-	Internal Diameter

  Preço (excluindo IVA) a partir de:

  161.79 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  CORO-TURN 107 CBN Positive Tip for Machining

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	2	High Hardness Material	-	Pozidriv	No-hand	0.4 ～ 0.8	-

  Preço (excluindo IVA) a partir de:

  99.17 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  CORO-TURN 107 Ceramic Positive Tip for Machining

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  R (Circular)	Outer Diameter/Inner Diameter	1	Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material	-	Pozidriv	No-hand	Other	-

  Preço (excluindo IVA) a partir de:

  45.91 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  CORO-TURN 111 CBN Positive Tip for Machining

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  T (Triangle)	Outer Diameter/Inner Diameter	3	High Hardness Material	-	Pozidriv	No-hand	0.4 ～ 0.8	-

  Preço (excluindo IVA) a partir de:

  115.11 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  CORO-TURN 111 Positive Tip for Machining

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	2	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Medium grinding	Pozidriv	No-hand	0.2 ～ 0.8	-

  Preço (excluindo IVA) a partir de:

  12.75 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  SANDVIK

  X-Line Chip (Negative)

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  T (Triangle)	Outer Diameter/Inner Diameter	3	Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material	Finish / Medium grinding	Negative	No-hand	0.4 ～ 0.8	-

  Preço (excluindo IVA) a partir de:

  19.22 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  Ceramic Tip (Material 6060 / 6065)

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  S (Rectangular)	Outer Diameter/Inner Diameter	4	Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material	-	Negative	No-hand	0.8 ～ Other	-

  Preço (excluindo IVA) a partir de:

  20.23 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  T-Max P Chip for Lathe Turning

  Unique shape exhibits high performance

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  V (35° Diamond-Shaped)	Outer Diameter/Inner Diameter	2	Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy	Finish / Medium grinding	Negative	No-hand	0.8 ～ 1.2	-

  Preço (excluindo IVA) a partir de:

  30.00 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  OSG

  CERATIZIT HYPERCOAT Tip

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Other	-	Steel / Stainless Steel / Cast Iron	-	Negative	No-hand	0.8	-

  Preço (excluindo IVA) a partir de:

  8.42 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  KYOCERA

  Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WP "For Finishing" with Wiper Edge

  [Work materials]· Carbon steel and alloy steel· Stainless steel· Gray Cast Iron and Ductile Cast Iron[Insert Grade]· Cermet (TN6020)· MEGACOAT cermet (PV7010, PV7025)· PVD cermet (PV7020)· CVD coating (CA515, CA525, CA530, CA5505, CA5515, CA5525)

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Steel	Finish	Negative	No-hand	0.8	-

  Preço (excluindo IVA) a partir de:

  8.14 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  KYOCERA

  Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP "for Finishing"

  [Work materials]· Carbon steel and alloy steel· Stainless steel[Insert Grade]· Cermet (TN6010, TN6020)· MEGACOAT cermet (PV7010, PV7025)· CVD coating (CA515, CA525, CA5515, CA5525)

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Steel	Finish	Negative	No-hand	0.2 ～ 1.2	-

  Preço (excluindo IVA) a partir de:

  8.14 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  KYOCERA

  Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GP "for Finishing"

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Steel / Stainless Steel / Cast Iron	Finish	Negative	No-hand	0.2 ～ 0.8	-

  Preço (excluindo IVA) a partir de:

  8.14 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  KYOCERA

  Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○CQ "For Finishing to Intermediate Cutting / Pull-Up"

  [Work materials]· Carbon steel and alloy steel· Stainless steel· Gray Cast Iron and Ductile Cast Iron[Insert Grade]· Cermet (TN6010, TN6020, TN60)· MEGACOAT cermet (PV7010, PV7025)· PVD cermet (PV90, PV7020)· CVD coating (CA515, CA525, CA5505, CA5515, CA5525, CA5535)

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Steel	Medium grinding	Negative	No-hand	0.4	-

  Preço (excluindo IVA) a partir de:

  8.14 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  KYOCERA

  Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GS "for Intermediate to Rough Cutting"

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Steel	Medium to deep grinding	Negative	No-hand	0.4 ～ 0.8	-

  Preço (excluindo IVA) a partir de:

  7.64 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  KYOCERA

  Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GS "for Intermediate to Rough Cutting"

  [Work materials]· Carbon steel and alloy steel· Stainless steel[Insert Grade]· MEGACOAT cermet (PV7025)· PVD cermet (PV90, PV7020)· CVD coating (CA515, CA525, CA5515, CA5525)

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Steel	Medium to deep grinding	Negative	No-hand	0.8	-

  Preço (excluindo IVA) a partir de:

  8.33 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  KYOCERA

  Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS "for Intermediate to Rough Cutting"

  [Work materials]· Carbon steel and alloy steel· Stainless steel· Gray Cast Iron and Ductile Cast Iron· Heat-resistant alloy[Insert Grade]· Cermet (TN6010)· MEGACOAT cermet (PV7010, PV7025)· CVD coating (CA515, CA525, CA5505, CA5515, CA5525, CA5535, CA6515, CA6525)· PVD coating (PR1125)

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Steel / Stainless Steel / Heat-resistant alloy, titanium alloy	Medium to deep grinding	Negative	No-hand	0.4 ～ 0.8	-

  Preço (excluindo IVA) a partir de:

  8.14 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  KYOCERA

  Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○ "for Rough Cutting"

  [Work materials]· Carbon steel and alloy steel· Stainless steel[Insert Grade]· MEGACOAT cermet (PV7025)· PVD cermet (PV90, PV7020)· CVD coating (CA515, CA525, CA5515, CA5525)

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Steel	Medium grinding	Negative	No-hand	0.4	-

  Preço (excluindo IVA) a partir de:

  8.33 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  KYOCERA

  Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○XS "for Rough Cutting" for Mild Steel

  [Work materials]· Carbon steel and alloy steel· Stainless steel· Gray Cast Iron and Ductile Cast Iron[Insert Grade]· Cermet (TN6010, TN6020, TN60)· MEGACOAT cermet (PV7025)· PVD cermet (PV90, PV7020)· CVD coating (CA515, CA525, CA5515, CA5525)

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Steel	Heavy cutting	Negative	No-hand	0.8	-

  Preço (excluindo IVA) a partir de:

  8.33 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  KYOCERA

  Turning Insert Diamond 80°, Negative, with Hole, CNGG12○○FP-TK "for Intermediate to Rough Cutting" Sharp Edge / Mirror Finish

  [Work materials]· Carbon steel and alloy steel· Stainless steel[Insert Grade]· MEGACOAT/MEGACOAT NANO(PR1425, PR1225)

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Stainless Steel	Medium to deep grinding	Negative	No-hand	0.4	-

  Preço (excluindo IVA) a partir de:

  17.24 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  KYOCERA

  Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○MQ, "for Finishing to Intermediate Cutting" for Stainless Steel / Heat Resistant Alloy

  [Specifications]· Shape: C (80° Rhombus)· Number of Available Corners: 4· Rake Angle: Negative· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Heat-resistant alloy, titanium alloy	Medium grinding	Negative	No-hand	0.4	-

  Preço (excluindo IVA) a partir de:

  9.66 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  KYOCERA

  Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○MS, "for Intermediate to Rough Cutting" for Stainless Steel / Heat Resistant Alloy

  [Specifications]· Shape: C (80° Rhombus)· Number of Available Corners: 4· Rake Angle: Negative· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium to Heavy Cutting

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Stainless Steel / Heat-resistant alloy, titanium alloy	Medium to deep grinding	Negative	No-hand	0.8 ～ 1.2	-

  Preço (excluindo IVA) a partir de:

  8.67 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  KYOCERA

  Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R / L-S "for Finishing"

  [Specifications]· Shape: C (80° Rhombus)· Number of Available Corners: 4· Rake Angle: Negative[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Finishing

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Steel / Stainless Steel / Cast Iron	Finish	Negative	Right-hand	0.4	-

  Preço (excluindo IVA) a partir de:

  12.99 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  KYOCERA

  Turning Insert Diamond 80°, Negative, with Hole, CNGG1204○○R / L-S "for Intermediate Cutting"

  [Specifications]· Shape: C (80° Rhombus)· Number of Available Corners: 4· Rake Angle: Negative[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  C (80° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Steel / Stainless Steel / Cast Iron	Medium grinding	Negative	Right-hand	0.4	-

  Preço (excluindo IVA) a partir de:

  18.95 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  KYOCERA

  Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○GP "for Finishing"

  [Specifications]· Shape: D (55° Diamond)· Number of Usable Corners: 4· Rake Angle: Negative· Handedness: No Handedness[Applications]· Machining Applications: For O.D., I.D.· Breaker Applications: Finishing

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  D (55° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Steel / Stainless Steel	Finish	Negative	No-hand	0.4 ～ 0.8	-

  Preço (excluindo IVA) a partir de:

  10.99 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  KYOCERA

  Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PQ "for Finishing to Intermediate Cutting"

  [Specifications]· Shape: D (55° Rhombus)· Number of Available Corners: 4· Rake Angle: Negative· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  D (55° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Steel	Medium grinding	Negative	No-hand	0.8	-

  Preço (excluindo IVA) a partir de:

  11.83 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  KYOCERA

  Turning Insert Diamond 55°, Negative, with Hole, DNMG11○○HQ "for Finishing"

  [Specifications]· Shape: D (55° Diamond)· Number of Usable Corners: 4· Rake Angle: Negative· Handedness: No Handedness[Applications]· Machining Applications: For O.D., I.D.· Breaker Applications: Intermediate Cutting

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  D (55° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Steel	Medium grinding	Negative	No-hand	0.2	-

  Preço (excluindo IVA) a partir de:

  9.35 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  KYOCERA

  Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○HQ "for Finishing to Intermediate Cutting"

  [Specifications]· Shape: D (55° Rhombus)· Number of Available Corners: 4· Rake Angle: Negative· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  D (55° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Steel / Stainless Steel / Heat-resistant alloy, titanium alloy	Medium grinding	Negative	No-hand	0.4 ～ 0.8	-

  Preço (excluindo IVA) a partir de:

  11.83 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  KYOCERA

  Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○CQ "For Finishing to Intermediate Cutting / Pull-Up"

  [Specifications]· Shape: D (55° Rhombus)· Number of Available Corners: 4· Rake Angle: Negative· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting

  Ler mais

  Shape	Application	Available corners	work material	Breaker Use	Rake angle	Cutting Direction	Nose R	O.D./ I.D. (For Threading)
  D (55° Diamond-Shape)	Outer Diameter/Inner Diameter	4	Steel / Stainless Steel	Medium grinding	Negative	No-hand	0.4	-

  Preço (excluindo IVA) a partir de:

  11.89 €

  Data de envio regular:

  6 dias úteis

  Configurar