Holding Tools for I.D. Tuning（Lubrication Hole Y/N：N/A Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 245.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Boring Tool Bit T-Max P Lever Clamp S...PTFNR / L-W
SANDVIK
[Features]
An easy-handling inner-diameter boring tool bit with excellent repeatability.
Supports inner-diameter turning (bore cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Configure nowStarting from∗ ： 504.42 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Boring Tool Bit, CoroTurn 107, Screw Clamp, F...-STFCR / L
SANDVIK
[Features]
A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
For inner-diameter turning (bore cutting) operations with longer protrusions.
For suppressing chattering.Configure nowStarting from∗ ： 841.09 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Turning CXS-..T090
SANDVIK
[Features]
CoroTurn XS Insert Bar
Solid-carbide coating
Boring bit for small-diameter machining
For turningConfigure nowStarting from∗ ： 53.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 56.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 58.03 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Profiling CXS-..TE98 Profiling
SANDVIK
[Features]
CoroTurn XS insert bar
Solid-carbide coating
Boring bit for small-diameter machining
For profilingConfigure nowStarting from∗ ： 59.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 74.48 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Profiling CXS-..R
SANDVIK
[Features]
CoroTurn XS insert bar
Solid-carbide coating
Boring bit for small-diameter machining
For grooving
Full R
R: 2.0 mmConfigure nowStarting from∗ ： 69.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Face Grooving CXS-..F
SANDVIK
[Features]
CoroTurn XS insert bar
Solid-carbide coating
Boring bit for small-diameter machining
For face grooving
Groove width: 1.0 mmConfigure nowStarting from∗ ： 76.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTurn XS Insert Bar For Inner Diameter Chamfering CXS-..GX
SANDVIK
For inner diameter precision machining of small accessories The positioning pin allows precise positioning of carbide boring tool bits in the adapterConfigure nowStarting from∗ ： 64.92 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
T-Max S Boring Tool Bit For Turning S..CTFPR / L
SANDVIK
A boring tool bit for turning that achieves high productivity, high quality, and high efficiencyConfigure nowStarting from∗ ： 199.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 355.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 253.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 191.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 191.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 183.72 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 571.04 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 830.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 867.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 867.74 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 867.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 867.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 867.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 867.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 497.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 497.15 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1,462.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 573.12 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 590.40 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 61.42 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 562.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 499.58 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Applicable Tip Shape |
| Minimum Machining Diameter |
| Application |
| Cutting Direction |
| Clamp Shape |
| Overall Length L1 |
| Clearance angle |
| Shank diameter |
| Protrusion length (L/D) |
| Lubrication Hole Y/N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | CoroTurn XS Insert Bar For Turning With Chip Breaker CXS-..T098 | CoroTurn XS Insert Bar For Inner Diameter Chamfering CXS-..GX | Cartridge T-Max P Lever Clamp For Negative Inserts PCLNR / L | Cartridge T-Max P Lever Clamp For Negative Inserts PTFNR / L | Cartridge T-Max P Lever Clamp For Negative Inserts PTGNR / L | Cartridge T-Max P Lever Clamp For Negative Inserts PTSNR / L | Cartridge T-Max P Lever Clamp For Negative Inserts PTTNR / L | Cartridge - Round Shank Boring Tool Bit For Positive Inserts, R / L140 | Cartridge Round Shank Boring Tool Bit For Positive Inserts R / L141 | Cartridge Round Shank Boring Tool Bit For Positive Inserts R / L142 | Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-STUCR / L-GR | Sandvik CoroTurn, SL Quick Change, CoroTurn, Cutting Heads, Adapter (Adjustable) | ||||||||||||||||||||||||||||||
| Starting from∗ | 253.73 € *Unit price with basic configuration | 245.86 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 504.42 € *Unit price with basic configuration | 841.09 € *Unit price with basic configuration | 53.87 € *Unit price with basic configuration | 56.57 € *Unit price with basic configuration | 58.03 € *Unit price with basic configuration | 59.21 € *Unit price with basic configuration | 74.48 € *Unit price with basic configuration | 69.36 € *Unit price with basic configuration | 76.70 € *Unit price with basic configuration | 64.92 € *Unit price with basic configuration | 199.20 € *Unit price with basic configuration | 355.47 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 253.73 € *Unit price with basic configuration | 191.98 € *Unit price with basic configuration | 191.98 € *Unit price with basic configuration | 183.72 € *Unit price with basic configuration | 571.04 € *Unit price with basic configuration | 830.40 € *Unit price with basic configuration | 867.74 € *Unit price with basic configuration | 867.74 € *Unit price with basic configuration | 867.74 € *Unit price with basic configuration | 867.74 € *Unit price with basic configuration | 867.74 € *Unit price with basic configuration | 867.74 € *Unit price with basic configuration | 497.15 € *Unit price with basic configuration | 497.15 € *Unit price with basic configuration | 1,462.84 € *Unit price with basic configuration | 573.12 € *Unit price with basic configuration | 590.40 € *Unit price with basic configuration | 61.42 € *Unit price with basic configuration | 562.55 € *Unit price with basic configuration | 499.58 € *Unit price with basic configuration |
| Min. Shipping Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 8 Days | 6 Days | 8 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 8 Days | 8 Days | 8 Days | 6 Days | 8 Days |
| Applicable Tip Shape | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | - | - | - | - | - | - | - | - | T (Triangle) | S (Rectangular) | S (Rectangular) | S (Rectangular) | C (80° Diamond-Shape) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | - | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | T (Triangle) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | T (Triangle) | T (Triangle) | R (Circular) | - | - | Other |
| Minimum Machining Diameter | 20/30 ～ 60/75 | 20 ～ 50 | 20 ～ 60 | 20 ～ 50 | 50 | 13 ～ 16 | 5.2 | 5.2 ～ 7.2 | 5.2 ～ 7.2 | 4.2 ～ 6.2 | 1.95 ～ 7.2 | 4.2 ～ 7.2 | 6.2 | 5.2 | 20 ～ 32 | - | 60 ～ 70 | 50 ～ 70 | 55 ～ 100 | 50 ～ 70 | 50/75 ～ 70/90 | 50 ～ 55 | 50/75 | 8 ～ 20 | 8 ～ 20 | 8 ～ 20 | - | - | - | - | - | - | - | - | - | - | 3 | 6 ～ 11 | 70 | 4.2 ～ 6.2 | 80 | 44 ～ 48 |
| Application | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter | Internal Diameter | Internal Diameter / Pull | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter / Inner diameter profiling |
| Cutting Direction | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand | - | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | - | Right-hand / Left-hand |
| Clamp Shape | Screw-on | - | - | Screw-on | Lever lock | Screw-on | - | - | - | - | - | - | - | - | Clamp-on | - | Lever lock | Lever lock | Lever lock | Lever lock | Lever lock | Lever lock | Lever lock | Screw-on | Screw-on | Screw-on | - | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Screw-on | Screw-on | Screw-on | - | Screw-on | Clamp-on | - | - | Clamp-on |
| Overall Length L1 | 25 ～ 63 | 24.2 ～ 54.4 | 25 ～ 63 | 25.5 ～ 57.2 | 400 | 150 ～ 180 | 32.25 ～ 42.25 | 37.25 ～ 62.25 | 32.25 ～ 62.25 | 37.26 ～ 52.25 | 52.25 | 32.3 ～ 52.7 | 37.3 | 3 ～ 37.3 | 200 ～ 300 | - | 63 ～ 70 | 55.3 ～ 70.3 | 63 ～ 100 | 55 ～ 70 | 55 ～ 70 | 57.2 ～ 63.2 | 55 | 30 ～ 128 | 30 ～ 128 | 30 ～ 128 | - | 45 | - | - | - | - | - | - | 15 | 14 | - | 100 ～ 150 | 300 | 27.3 ～ 52.3 | - | 350 ～ 400 |
| Clearance angle | - | - | - | - | - | 7° | - | - | - | - | - | - | - | - | 11° | - | - | - | - | - | - | - | - | - | - | - | - | 0° | 0° | 0° | 0° | 0° | 0° | 7° | 7° | 5° | - | 7° | 0° | - | - | 0° |
| Shank diameter | - | - | - | - | 40 | 10 ～ 12 | 5 | 5 ～ 7 | 5 ～ 7 | 4 ～ 6 | 5 ～ 7 | 4 ～ 7 | 6 | 5 | 16 ～ 25 | - | - | - | - | - | - | - | - | - | - | - | - | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 32 | 32 | 16 ～ 20 | 5 ～ 10 | 40 | 4 ～ 6 | - | 32 ～ 40 |
| Protrusion length (L/D) | - | - | - | - | 160 | 100 ～ 120 | - | - | - | - | - | - | - | - | 32.5～64 ～ 49～100 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 20 ～ 40 | 160 | - | - | 128 ～ 160 |
| Lubrication Hole Y/N | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
Loading...
Filter by:
-
Applicable Tip Shape
-
Minimum Machining Diameter
- 0.3
- 0.5
- 0.6
- 0.6 1.0 2.0 2.8 3.0 4.0 5.0
- 0.9
- 1
- 1.5
- 1.95
- 2
- 2.5
- 3
- 3.2
- 3.5
- 4
- 4.2
- 5
- 5.2
- 5.5
- 6
- 6.0 6.6 8.0
- 6.0 6.6 8.0 8.8 11.0
- 6.0 6.8 7.0
- 6.2
- 6.5
- 6.604
- 7
- 7.2
- 7.5
- 8
- 8.2042
- 8.5
- 8.6868
- 9
- 10
- 10.2108
- 10.4902
- 11
- 12
- 12.192
- 12.5
- 12.7
- 13
- 14
- 15
- 15.1892
- 16
- 16.3068
- 17
- 17.2974
- 18
- 18.4912
- 18.9992
- 19
- 19.6088
- 19.9898
- 20
- 20/30
- 20.1
- 20.5
- 20.62
- 21
- 21.59
- 22
- 23
- 23.5966
- 24.892
- 24.9
- 24.99
- 24.9936
- 24.994
- 25
- ø25
- 25/37
- 25.4
- 25.7048
- 26
- 26.01
- 26.6954
- 27
- 28
- 30
- 30.505
- 30.5054
- 31
- 31.496
- 31.5
- 31.801
- 32
- ø32
- 32.004
- 32.5
- 32.512
- 32.9946
- 32.995
- 33
- 34
- 35
- 35.45
- 36.45
- 37
- 37.287
- 37.2872
- 37.313
- 37.45
- 38
- 38.1
- 38.45
- 38.913
- 39
- 39.45
- 40
- 40/55
- 40.005
- 40.01
- 40.1
- 40.1066
- 40.132
- 40.45
- 41
- 41.45
- 41.5
- 42.0
- 42.45
- 43.307
- 43.45
- 44
- ø44
- 44.45
- 44.704
- 45
- 45.0088
- 45.45
- 46
- 46.45
- 46.99
- 47
- 47.45
- 48
- 48.45
- 49
- 49.3014
- 49.45
- 50
- 50/75
- 50.01
- 50.0126
- 50.038
- 50.45
- 50.8
- 51
- 51.45
- 52
- 52.45
- 53
- 53.45
- 54.0004
- 54.45
- 54.99
- 55
- 55.35
- 56
- 56.35
- 57
- 57.35
- 58
- 58.35
- 59.35
- 59.99
- 60
- 60/75
- 60.35
- 61.01
- 61.011
- 61.35
- 62
- ø62
- 62.35
- 62.992
- 63
- 63.35
- 63.5
- 63.98
- 64
- 64.35
- 64.7954
- 65
- 65.35
- 66.35
- 67.35
- 67.894
- 68
- 68.35
- 69
- 69.35
- 70
- 70/90
- 70.35
- 71.35
- 72
- 72.35
- 73.35
- 74.35
- 75
- 75.01
- 75.35
- 76.35
- 77.013
- 77.35
- 78.35
- 79
- 79.35
- 80
- 80.01
- 80.35
- 81.35
- 82.35
- 82.499
- 83
- 83.35
- 84.35
- 85
- 85.35
- 86
- 86.35
- 87.35
- 88
- ø88
- 88.35
- 89
- 89.35
- 90
- 90.35
- 98
- 99
- 99.9998
- 100
- 101
- 105
- 106
- 109
- 111.35
- 115
- 119.9896
- 120
- 123
- ø125
- 130
- 132.35
- 135
- 136
- 139.7
- 140
- 145
- 148
- 150
- 153.35
- 166
- 170
- 172.72
- 175
- 188
- 198
- 212
- 220
- 223.52
- 228
- 248
- 250
- 258
- 275
- 279.4
- 298
- 378
- 458
- 538
- 778
- 1018
-
Application
- Internal Diameter
- Inner diameter profiling
- Pull
-
Cutting Direction
- Right-hand
- Left-hand
- IKOU
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Lever lock
- Wedge Lock
- Other
-
Overall Length L1
-
Clearance angle
- 5°
- 7°
- 0°
- 11°
-
Shank diameter
-
Protrusion length (L/D)
-
Lubrication Hole Y/N
Brand
-
- SANDVIK (56)
- KYOCERA (24)
- ISCAR (7)
- SHOWA TOOL (0)
- MANYO TOOLS (0)
- THE CUT (0)
- BIG KAISER (0)
CAD data type
-
- 2D
- 3D
Categories related to Holding Tools for I.D. Tuning
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.