Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!
Thread Cutting Holders
The threading holder is a throwaway holder used for threading in turning. There are two types of threading holders, one for the inner diameter and the other for the outer diameter. The turning holder is mainly a square shank, and the boring holder is mainly a round shank. The square shank or round shank size is selected according to the processing machine used. Depending on the holder, there are right hand only, left hand only, and no hands (for both), so select according to the machining direction. Threaded holders can be processed with various specifications such as metric threads, unified screws, etc. and various screw pitches by exchanging the tips, but confirm and select the corresponding tip and holder specifications because there are minimum inner diameters.
42 itens
* Informações sobre dias de expedição, custos de expedição e preços
SANDVIK
SANDVIK CoroThread 266 Shank Tool for Thread Turning
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Outer Diameter Screw - - - Right-hand / Left-hand - - - ConfigurarPreço (excluindo IVA) a partir de:213.38 €Data de envio regular:5 dias úteis
SANDVIK
Sandvik, CoroThread 266, Cutting Unit, Threading, C-266R/LKF-16
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) - 20 ～ 50 Right-hand / Left-hand - Available N/A ConfigurarPreço (excluindo IVA) a partir de:552.47 €Data de envio regular:6 dias úteis
SANDVIK
CoroThread 266, Shank Tool Bit, Screw Clamp, Millimeter Version, 266R / LFA
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Outer Diameter Screw 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) - - Right-hand / Left-hand 12 Sq. / 16 Sq. / 20 Sq. / 25 Sq. N/A N/A ConfigurarPreço (excluindo IVA) a partir de:212.49 €Data de envio regular:8 dias úteis
KYOCERA
Threading, Inner Diameter Holder SIN Type / CIN Type
This is a CIN threaded holder for the inner diameter.Clamp-on method.SIN/CINLer maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade - - - - Right-hand - - - ConfigurarPreço (excluindo IVA) a partir de:127.92 €Data de envio regular:6 dias úteis
SANDVIK
Cross-Thread 266 Thread Cutting Boring Bit
First recommendation for external and internal diameter threadsA standard range of products covering a wide variety of screw profiles with materials and breakers that support different materialsLer maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) - 25 ～ 63 Right-hand / Left-hand Ø20 / Ø25 / Ø32 / Ø40 Available / N/A N/A ConfigurarPreço (excluindo IVA) a partir de:285.32 €Data de envio regular:6 dias úteis
OSG
HY-PRO Planet Cutter TMC Holders (1-Flute / Standard Type) PNTC-TMC
[Features] Shape: Threaded holder; Lubrication hole (oil hole): yes; 1 insert; Standard type.Ler maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade - - - - Right-hand / Left-hand - - - ConfigurarPreço (excluindo IVA) a partir de:150.58 €Data de envio regular:6 dias úteis
SANDVIK
CoroThread 266 Boring Tool Bit For Threading 266R / LKF-R
[Features]An inner-diameter threading type boring tool bit with extremely high rigidity. The iLock interface helps prevent the insert from moving around during threading operations, guaranteeing stability and accuracy while also ensuring a clean finish with excellent repeatability. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter threading.Ler maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) - 25 ～ 32 Left-hand Ø20 / Ø25 Available N/A ConfigurarPreço (excluindo IVA) a partir de:285.32 €Data de envio regular:6 dias úteis
SANDVIK
Insert For CoroCut MB, For Threading, UN 60° MB-07TH-UN
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Unified (UN, UNC, UNF, UNEF) - 10 Right-hand / Left-hand - N/A N/A ConfigurarPreço (excluindo IVA) a partir de:47.32 €Data de envio regular:6 dias úteis
SANDVIK
CoroThread 266 - Outer-Diameter Threading, Coromant Capto, Cutting Head, Screw Clamp, C-266R / LFG
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Outer Diameter Screw 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) - - Right-hand / Left-hand - Available N/A ConfigurarPreço (excluindo IVA) a partir de:393.49 €Data de envio regular:6 dias úteis
SANDVIK
CoroThread 266, Shank Tool Bit, QS Series Short, QS-266RFA-16
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Outer Diameter Screw 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / Taper Rc (PT) (BSPT) for 55°C tubes / American Pipe Taper (NPT) - - Right-hand / No-hand 10 Sq. / 12 Sq. / 16 Sq. N/A N/A ConfigurarPreço (excluindo IVA) a partir de:254.41 €Data de envio regular:6 dias úteis
SANDVIK
Sandvik CoroThread 266 Small Lathe Thread-Cutting Shank Bit
[Features]· Threading shank bit with extremely high rigidity.· iLock interface suppresses tip movement while machining threads, guarantees tip stability and accuracy, and achieves an excellent finished surface and repeatability.[Applications]· For outer diameter threading.· Especially for small lathes.Ler maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Outer Diameter Screw - - - - - - - ConfigurarPreço (excluindo IVA) a partir de:193.24 €Data de envio regular:6 dias úteis
KYOCERA
Threading, External Holder, KTN Type
Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.Ler maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade - - - - Right-hand - - - ConfigurarPreço (excluindo IVA) a partir de:134.27 €Data de envio regular:10 dias úteis![Outer Diameter Threading Tool Holder [for TT Chip] KTT Type](https://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/holder.jpg)
KYOCERA
Outer Diameter Threading Tool Holder [for TT Chip] KTT Type
Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.Ler maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade - - - - Left-hand - - - ConfigurarPreço (excluindo IVA) a partir de:120.41 €Data de envio regular:10 dias úteis
SANDVIK
Cutting Head for CORO-TURN SL CORO THREAD 266
Unique shape exhibits high performanceLer maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) 0.5-3.0 ～ 2.5-7.0 32 ～ 50 Right-hand / Left-hand Ø25 / Ø32 / Ø40 N/A N/A ConfigurarPreço (excluindo IVA) a partir de:439.85 €Data de envio regular:8 dias úteisOSG
HY-PRO Planet Cutter TMLC Holders (1-Flute / Long Type) TMLC
[Features] Shape: Thread holder; cutting direction: right-hand; 1 insert; long type.Ler maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade - - - - Right-hand - - - ConfigurarPreço (excluindo IVA) a partir de:256.21 €Data de envio regular:6 dias úteisOSG
HY-PRO Planet Cutter TM2C Holders (2-Flute / High Efficiency Type) TM2C
[Features] Shape: Thread holder; cutting direction: right-handed; 2 inserts; high-efficiency type.Ler maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade - - - - Right-hand - - - ConfigurarPreço (excluindo IVA) a partir de:243.21 €Data de envio regular:6 dias úteisOSG
HY-PRO Planet Cutter TMNC Holders (1-Flute / for Tapered Screws for Pipes) TMNC
This is a HY-PRO Planet Cutter TMNC holder for tapered pipe threads with an insert.Form: Thread HolderLer maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade - - - - Right-hand / Left-hand - - - ConfigurarPreço (excluindo IVA) a partir de:165.21 €Data de envio regular:6 dias úteis
OSG
HY-PRO Planet Cutter Shell Type TMSH
[Features] Shape: Threaded holder; Lubrication hole (oil hole): yes [Features] This is a TMSH housing type for HY-PRO P female metric threads. -Please order after confirming the compatible screw size and body.Ler maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade - - - - - - - - ConfigurarPreço (excluindo IVA) a partir de:850.42 €Data de envio regular:6 dias úteis
OSG
HY-PRO Planet Cutter Single Point Holders (Cylindrical Shank) TM-SC-C
This is a HY-PRO Planet Cutter single point holder.Shape: Threaded holderLubrication hole (oil hole): YesLer maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade - 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) - - - - Available - ConfigurarPreço (excluindo IVA) a partir de:217.21 €Data de envio regular:6 dias úteis
SANDVIK
CoroCut MB Insert For Threading Without Finishing Blade, V-Shaped 60°, Metric 60°, Whitworth 55°
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) 0.5 ～ 2.5 10 Right-hand / Left-hand - N/A N/A ConfigurarPreço (excluindo IVA) a partir de:48.12 €Data de envio regular:8 dias úteis
SANDVIK
CoroTurn XS Insert Bar For Threading
[Features]CoroTurn XS insert barSolid-carbide coatingBoring bit for small-diameter machiningFor threadingFor inch thread tappingPitch: 28 threadsLer maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) / Parallel G (PF) Rp (PS) for 55°C tubes / American Pipe Taper (NPT) / 30° Trapezoidal (Tr) - 4.2 ～ 7.2 Right-hand / Left-hand - N/A N/A ConfigurarPreço (excluindo IVA) a partir de:63.29 €Data de envio regular:6 dias úteis
SANDVIK
T-Max, U-Lock, Cutting Head, Inner Diameter Threading, R/L566.0KFC-11
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) 0.5-2.0 20 ～ 25 Right-hand / Left-hand Ø16 / Ø20 Available N/A ConfigurarPreço (excluindo IVA) a partir de:494.25 €Data de envio regular:6 dias úteis
SANDVIK
T-Max, Cutting Unit, U-Locking Screw, CR/L166.0KF-11
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) 0.5-2.0 20 Right-hand - Available N/A ConfigurarPreço (excluindo IVA) a partir de:526.85 €Data de envio regular:6 dias úteis
SANDVIK
T-Max Twin Lock Head For Threading R 566.39 KF
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 30° Trapezoidal (Tr) - - Right-hand - N/A N/A ConfigurarPreço (excluindo IVA) a partir de:1,001.89 €Data de envio regular:6 dias úteis
SANDVIK
Insert For CoroCut MB, For Threading, NPT 60° MB-07TH-NT
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread American Pipe Taper (NPT) - 10 Right-hand / Left-hand - N/A N/A ConfigurarPreço (excluindo IVA) a partir de:47.32 €Data de envio regular:6 dias úteis
SANDVIK
Insert For CoroCut MB, For Threading, V Profile 60° MB-07TH-VM
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) 0.5-0.75 ～ 2.5 10 Right-hand / Left-hand - N/A N/A ConfigurarPreço (excluindo IVA) a partir de:43.00 €Data de envio regular:6 dias úteis
SANDVIK
Insert For CoroCut MB, For Threading, Whitworth 55° MB-07TH-WH
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 55°C Whitworth (W) - 10 Right-hand / Left-hand - N/A N/A ConfigurarPreço (excluindo IVA) a partir de:45.63 €Data de envio regular:6 dias úteis
SANDVIK
Sandvik, CoroThread 266, Cutting Unit, Threading, C-266R/LKF-22
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) - 25 ～ 50 Right-hand / Left-hand - Available N/A ConfigurarPreço (excluindo IVA) a partir de:552.47 €Data de envio regular:6 dias úteis
SANDVIK
CoroThread 266 SL Cutting Head For Outer-Diameter Threading, Screw Clamp, SL-FG
[Features]An outer-diameter threading type cutting head with extremely high rigidity. The iLock interface helps prevent the insert from moving around during threading operations, guaranteeing stability and accuracy while also ensuring a clean finish with excellent repeatability. For outer-diameter threading.Ler maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Outer Diameter Screw 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) 0.5-3.0 25 ～ 40 Right-hand / Left-hand Ø25 / Ø32 / Ø40 Available N/A ConfigurarPreço (excluindo IVA) a partir de:441.86 €Data de envio regular:6 dias úteis
SANDVIK
CoroThread 266, Coromant Capto, Cutting Head
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Outer Diameter Screw 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) - - Right-hand - Available N/A ConfigurarPreço (excluindo IVA) a partir de:1,003.06 €Data de envio regular:8 dias úteis
SANDVIK
CoroThread 266, Coromant Capto, Cutting Head, C-266RFAZ-16
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Outer Diameter Screw 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) - - Right-hand - Available N/A ConfigurarPreço (excluindo IVA) a partir de:395.29 €Data de envio regular:6 dias úteis
SANDVIK
Sandvik, CoroThread 266, Cutting Unit, Threading, C-266R/LFGZ
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Outer Diameter Screw 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) - - Right-hand - Available N/A ConfigurarPreço (excluindo IVA) a partir de:395.29 €Data de envio regular:6 dias úteis
SANDVIK
CoroThread 266, Threaded Cartridge, 266R/LKF-CA
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) - 55 ～ 60 Right-hand / Left-hand 16 Sq. N/A N/A ConfigurarPreço (excluindo IVA) a partir de:256.74 €Data de envio regular:6 dias úteis
SANDVIK
Sandvik, CoroThread 266, 266 Head, Threading
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) 8 - Right-hand - N/A N/A ConfigurarPreço (excluindo IVA) a partir de:932.03 €Data de envio regular:6 dias úteis
SANDVIK
CoroMill 326 Solid Carbide End Mill, Chamfering, Millimeter Version, 326R-CH
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) - - Right-hand - N/A N/A ConfigurarPreço (excluindo IVA) a partir de:112.39 €Data de envio regular:8 dias úteis
SANDVIK
Tool For Small Lathes - CoroTurn XS Insert Bar For Threading, For High-Hardness Materials, CXS-VM
[Features]CoroTurn XS insert barSolid-carbide coatingBoring bit for small-diameter machiningFor threadingWithout finishing blade, for 60° threadingPitch: 1.5 mmLer maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) - 6.2 Right-hand / Left-hand - N/A N/A ConfigurarPreço (excluindo IVA) a partir de:67.74 €Data de envio regular:8 dias úteis
SANDVIK
Tool For Small Lathes - CoroTurn XS, Blank, CXS-B
[Features]CoroTurn XS insert barCarbideBoring bit for small-diameter machiningBlankLer maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) - - Right-hand - N/A N/A ConfigurarPreço (excluindo IVA) a partir de:41.60 €Data de envio regular:8 dias úteis
SANDVIK
Sandvik, CoroThread 266, Boring Tool Bit, Grooving, Cylindrical Shank
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) - - Right-hand / Left-hand Ø20 Available N/A ConfigurarPreço (excluindo IVA) a partir de:313.79 €Data de envio regular:6 dias úteis
SANDVIK
Sandvik, CoroThread 266, Boring Tool Bit, Grooving, Cylindrical, Rectangular Flat
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT) - - Right-hand / Left-hand Ø20 Available N/A ConfigurarPreço (excluindo IVA) a partir de:313.79 €Data de envio regular:6 dias úteis
SANWA SEISAKUSYO
[Features] -A holder for threading outer diameters made of carbon steel for use in mechanical engineering.It is threaded.[Shank height (mm)] 25Ler maisApplication Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Outer Diameter Screw - - - - - - - ConfigurarPreço (excluindo IVA) a partir de:466.25 €Data de envio regular:6 dias úteis
SANDVIK
SANDVIK CoroThread 266 Cutting Unit for Thread Turning
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Outer Diameter Screw / Internal thread - - 20 ～ 50 Right-hand / Left-hand - - - ConfigurarPreço (excluindo IVA) a partir de:399.00 €Data de envio regular:5 dias úteis
SANDVIK
SANDVIK T-Max U-Lock Cutting Unit for Thread Turning
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Internal thread - - 20 Right-hand - - - ConfigurarPreço (excluindo IVA) a partir de:532.00 €Data de envio regular:5 dias úteis
