Registar

Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Condições de filtragem

Limpar tudo

  • Estoque
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • work material
  • Tool Material Type
  • Shank Type
  • Coating Y/N
  • Drill Bits (Tool Material Type: Carbide página 6)

    Drill bits are a type of cutting tool to drill holes in work materials. They are used with machine tools such as drill press, lathe, milling machine and machining center. Drill bit materials include alloy carbide, high speed steel powder, high-speed steel, and some of them have coatings such as silicone-based, TiAlN-based, TiCN-based, TiN-based coatings, or surface treatment such as steam oxide treatment for enhanced oil retention on surface. Additionally, there is also a type of machining called thinning, given to the bit tip to reduce the thrust load applied to it when drilling. There are different shapes of thinning such as X-shape (for machining deep holes), R-shape (for machining stainless-steel-based workpieces) and S-shaped (for machining cast-iron- or non-ferrous-based workpieces); each one of them is used accordingly for different features and applications. In recent years, flat drill bits, which can drill holes without bending even on round surfaces, are attracting attention.
    • P5D for Phoenix Series Phoenix Drills 5D

        OSG

        P5D for Phoenix Series Phoenix Drills 5D

        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        21 ~ 33.5120 ~ 183-Carbide184 ~ 261End Mill ShankN/ANon-CoatedN/A
        Preço (excluindo IVA) a partir de:
        537.60 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Aqua Drill EX Flat Regular AQDEXZR

          NACHI(FUJIKOSHI)

          Aqua Drill EX Flat Regular AQDEXZR

          Flat drill with a hole depth of 4D and good hole drilling performance. Requires centering hole or guide hole.
          Ler mais
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          3.6 ~ 10.523 ~ 67General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]Carbide60 ~ 110-AvailableOther-
          Preço (excluindo IVA) a partir de:
          109.93 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Aqua Drill EX Semi-Long AQDEXSL

            NACHI(FUJIKOSHI)

            Aqua Drill EX Semi-Long AQDEXSL

            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            224General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide56End Mill ShankAvailableOtherN/A
            Preço (excluindo IVA) a partir de:
            117.76 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • AQDEXZOH3D Aqua Drill EX Flat Oil Hole 3D

              NACHI(FUJIKOSHI)

              AQDEXZOH3D Aqua Drill EX Flat Oil Hole 3D

              Can perform highly efficient flat hole drilling up to a hole depth of 3D. Drill with lubricant hole capable of working stainless steel.
              Ler mais
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              6.530General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]Carbide88End Mill ShankAvailableOtherAvailable
              Preço (excluindo IVA) a partir de:
              147.24 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • 2D Type Indexable Drill, P2D

                OSG

                2D Type Indexable Drill, P2D

                Indexable drills that can stably perform hole drilling with 2D depth.
                Ler mais
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                21 ~ 33.5-General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide121 ~ 160End Mill ShankN/ANon-CoatedAvailable
                Preço (excluindo IVA) a partir de:
                316.60 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Indexable Drill 3D Type P3D

                  OSG

                  Indexable Drill 3D Type P3D

                  Indexable insert drill that can perform stable drilling with 3D depth.
                  Ler mais
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  21 ~ 50.5-General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide142 ~ 252End Mill ShankN/ANon-CoatedAvailable
                  Preço (excluindo IVA) a partir de:
                  355.70 €
                  Data de envio regular:
                  6 dias úteis
                  Configurar
                • Indexable Drill 4D Type P4D

                    OSG

                    Indexable Drill 4D Type P4D

                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    21 ~ 33.5-General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide163 ~ 227End Mill ShankN/ANon-CoatedAvailable
                    Preço (excluindo IVA) a partir de:
                    505.90 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • Aqua Drill EX Flat Long Shank AQDEXZLS

                      NACHI(FUJIKOSHI)

                      Aqua Drill EX Flat Long Shank AQDEXZLS

                      Flat drill with a lower neck length of 10D and good hole drilling performance.
                      Ler mais
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      3.7 ~ 7.918 ~ 36General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]Carbide100 ~ 120End Mill ShankAvailableOtherN/A
                      Preço (excluindo IVA) a partir de:
                      127.62 €
                      Data de envio regular:
                      6 dias úteis
                      Configurar
                    • Pivot Drill Semi-Long Blade

                        ATOM

                        Pivot Drill Semi-Long Blade

                        Drill for precision and multiporous fine hole drilling with a minimum diameter of ø0.04 (diameter 0.04 mm). [Features] · Blade diameter tolerance +0 to -0.005. [Applications] · A wide range of materials are applicable, from general steel through to non-ferrous metals and resin.
                        Ler mais
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        0.03 ~ 0.990.5 ~ 11General Steel[○/◎] / Quenched and tempered steel[○/◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] / Resin[○]Carbide38End Mill ShankN/ANon-CoatedN/A
                        Preço (excluindo IVA) a partir de:
                        32.57 €
                        Data de envio regular:
                        6 dias úteis
                        Configurar
                      • Micro Drill "NEO PRO" Semi-Long Blades
                        • DESCONTO

                        ATOM

                        Micro Drill "NEO PRO" Semi-Long Blades

                        A series that achieves stable long life developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
                        Ler mais
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        0.04 ~ 0.990.6 ~ 11General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○]Carbide38End Mill ShankAvailableFor General Steels (AlCrN, etc.)N/A
                        Preço (excluindo IVA) a partir de:
                        41.11 €
                        Preço especial
                        Data de envio regular:
                        Item em stock: 1 dia útil
                        Alguns artigos podem ser enviados no próprio dia
                        Configurar
                      • Carbide Max Drill, Short
                        • Volume Discount

                        WIDIN

                        Carbide Max Drill, Short

                        [Features]· Supports highly rigid work materials and long life by dedicated drilling super fine 0.5μ material and TiALN-HH (titanium aluminum and silicone type) coating that provides high surface rigidity, high heat resistant oxidation temperature and lubricant performance.
                        Ler mais
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        3.2 ~ 820 ~ 40General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide60 ~ 79--Other-
                        Preço (excluindo IVA) a partir de:
                        40.48 €
                        Data de envio regular:
                        6 dias úteis
                        Configurar
                      • Carbide Max Drill, Medium

                          WIDIN

                          Carbide Max Drill, Medium

                          [Features]· TiAIN-HH (titanium aluminum silicone type) coat and supports high hardness work materials and long life.
                          Ler mais
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          3.630General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide65--Other-
                          Preço (excluindo IVA) a partir de:
                          48.99 €
                          Data de envio regular:
                          6 dias úteis
                          Configurar
                        • Carbide Straight Drill
                          • DESCONTO
                          • Volume Discount

                          WIDIN

                          Carbide Straight Drill

                          [Features]· The blade diameter and shank diameter are same, and easy to use.· Coating is applied to SSTD to improve from the existing SSD.
                          Ler mais
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          1 ~ 8.610 ~ 50General Steel[○] / Aluminum[○]Carbide38 ~ 95--TiN-
                          Preço (excluindo IVA) a partir de:
                          15.76 €
                          Preço especial
                          Data de envio regular:
                          Item em stock: 1 dia útil
                          Alguns artigos podem ser enviados no próprio dia
                          Configurar
                        • Carbide 2-Flute Leading Drill 60° D921X

                            7 LEADERS

                            Carbide 2-Flute Leading Drill 60° D921X

                            [Features]· 60° leading drill.· Prevents chipping of the tip by maintaining the tip part at 120°.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
                            Ler mais
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.5 ~ 201 ~ 40General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Carbide38 ~ 130End Mill Shank-Other-
                            Preço (excluindo IVA) a partir de:
                            32.24 €
                            Data de envio regular:
                            6 dias úteis
                            Configurar
                          • Carbide 2-Flute Leading Drill 90° D922X

                              7 LEADERS

                              Carbide 2-Flute Leading Drill 90° D922X

                              [Features]· 90° leading drill.· Prevents the chipping of the tip.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
                              Ler mais
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              2 ~ 64 ~ 12General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Carbide38 ~ 70End Mill Shank-Other-
                              Preço (excluindo IVA) a partir de:
                              32.24 €
                              Data de envio regular:
                              6 dias úteis
                              Configurar
                            • Carbide 2-Flute Leading Drill 90° Long AlTiN D932X

                                7 LEADERS

                                Carbide 2-Flute Leading Drill 90° Long AlTiN D932X

                                [Features]· 90° Long Shank Leading Drill· Prevents chipping of the tip by maintaining the tip part at 120°.· The long protrusion enables leading cutting.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
                                Ler mais
                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                3 ~ 209 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Carbide75 ~ 250End Mill Shank-Other-
                                Preço (excluindo IVA) a partir de:
                                47.90 €
                                Data de envio regular:
                                6 dias úteis
                                Configurar
                              • Carbide 2-Flute Leading Drill 142° D924X

                                  7 LEADERS

                                  Carbide 2-Flute Leading Drill 142° D924X

                                  [Features]· 142° Leading Drill· Use for centering machining for tip angle 140°drill.· Nanoparticle Multilayer Coating· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
                                  Ler mais
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  0.5 ~ 201 ~ 40General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Carbide38 ~ 130End Mill Shank-Other-
                                  Preço (excluindo IVA) a partir de:
                                  32.24 €
                                  Data de envio regular:
                                  6 dias úteis
                                  Configurar
                                • CoroDrill 460 (Inner Lubrication Type)

                                    SANDVIK

                                    CoroDrill 460 (Inner Lubrication Type)

                                    [Features]· A highly versatile carbide solid drill.· Because just one unit can be used to perform hole drilling in any type of work material, drill inventory can be reduced and setup time can also be shortened.[Applications]· Work materials: General steel, stainless steel, cast iron, light alloy.· For drilling any kind of workpiece.· For drilling mixed workpieces.
                                    Ler mais
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    8.05--Carbide103--TiAlN-
                                    Preço (excluindo IVA) a partir de:
                                    174.03 €
                                    Data de envio regular:
                                    8 dias úteis
                                    Configurar
                                  • Carbide Drill

                                      DIXI

                                      Carbide Drill

                                      [Features]· High precision machining is possible as it has undergone density finishing of outer diameter tolerance h6.· It provides excellent polish on grooves and surfaces, removes cutting chips well and provides excellent hole finish.[Applications]· Work materials: Steel, non-ferrous metal, plastic, alloy steel, stainless steel.
                                      Ler mais
                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                      1.2 ~ 148 ~ 37-Carbide30 ~ 107----
                                      Preço (excluindo IVA) a partir de:
                                      27.03 €
                                      Data de envio regular:
                                      6 dias úteis
                                      Configurar
                                    • Carbide Slim Shank Drill with Tips

                                        FUKUDA

                                        Carbide Slim Shank Drill with Tips

                                        [Features]· The shank diameter is the same for the 12, 16, and 20 mm straight shanks, making them easy to use and providing highly accurate drilling.· The blade length, shank length, and overall length are all unified, so the time and labor of exchanging drill sizes is reduced.· Ideal for machining centers and NC machines.[Applications]· Work materials: Cast iron, non-ferrous metals.
                                        Ler mais
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        14 ~ 2670-Carbide150----
                                        Preço (excluindo IVA) a partir de:
                                        157.58 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar
                                      • Aqua Drill EX Oil Hole 3-Flute 3D AQDEXOH3F3D

                                          NACHI(FUJIKOSHI)

                                          Aqua Drill EX Oil Hole 3-Flute 3D AQDEXOH3F3D

                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                          6.332General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide88Straight ShankAvailableFor General Steels (AlCrN, etc.)Available
                                          Preço (excluindo IVA) a partir de:
                                          162.70 €
                                          Data de envio regular:
                                          6 dias úteis
                                          Configurar
                                        • Aqua Drill EX 3-Flute Regular AQDEX3FR

                                            NACHI(FUJIKOSHI)

                                            Aqua Drill EX 3-Flute Regular AQDEX3FR

                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                            319General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide49Straight ShankAvailableFor General Steels (AlCrN, etc.)N/A
                                            Preço (excluindo IVA) a partir de:
                                            131.22 €
                                            Data de envio regular:
                                            6 dias úteis
                                            Configurar
                                          • Aqua Drill EX Starting AQDEXST

                                              NACHI(FUJIKOSHI)

                                              Aqua Drill EX Starting AQDEXST

                                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                              412General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Carbide52Straight ShankAvailableFor General Steels (AlCrN, etc.)N/A
                                              Preço (excluindo IVA) a partir de:
                                              95.10 €
                                              Data de envio regular:
                                              6 dias úteis
                                              Configurar
                                            • Diamond Coated Drill DCD

                                                NACHI(FUJIKOSHI)

                                                Diamond Coated Drill DCD

                                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                4.0530Aluminum[○] / Copper[○]Carbide65Straight ShankAvailableDia CoatN/A
                                                Preço (excluindo IVA) a partir de:
                                                142.34 €
                                                Data de envio regular:
                                                6 dias úteis
                                                Configurar
                                              • Aqua Drill EX VF Tip TVF

                                                  NACHI(FUJIKOSHI)

                                                  Aqua Drill EX VF Tip TVF

                                                  A flat tip for insert drills that is ideal for high-efficiency, high-precision machining of large diameters.
                                                  Ler mais
                                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                  15.6 ~ 26.5-General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide---For General Steels (AlCrN, etc.)-
                                                  Preço (excluindo IVA) a partir de:
                                                  116.74 €
                                                  Data de envio regular:
                                                  6 dias úteis
                                                  Configurar
                                                • Solid Drill (with Oil Hole) for Ultra-Hard Steel, For 3D SDOX3A
                                                  • Volume Discount

                                                  OKAZAKI SEIKO

                                                  Solid Drill (with Oil Hole) for Ultra-Hard Steel, For 3D SDOX3A

                                                  [Features]· Ideal for machining stainless steel and other difficult-to-cut materials.· Realizes smooth cutting powder ejection.[Specifications]· Coolant through (with OH)
                                                  Ler mais
                                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                  3.85 ~ 11.85-General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎]Carbide-Straight ShankAvailableTiAlNAvailable
                                                  Preço (excluindo IVA) a partir de:
                                                  62.87 €
                                                  Data de envio regular:
                                                  10 dias úteis
                                                  Configurar
                                                • Solid Carbide Medium Type Drill for High-Speed Machining FS-GDN
                                                  • Volume Discount

                                                  OSG

                                                  Solid Carbide Medium Type Drill for High-Speed Machining FS-GDN

                                                  Carbide drill medium type for high-speed machining with excellent heat resistance and abrasion resistance.
                                                  Ler mais
                                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                  3.5 ~ 4.530 ~ 36General Steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎]Carbide60 ~ 71End Mill ShankAvailableTiAlNN/A
                                                  Preço (excluindo IVA) a partir de:
                                                  92.70 €
                                                  Data de envio regular:
                                                  6 dias úteis
                                                  Configurar
                                                • CORO-DRILL 460-XM Tap Pilot Hole Chamfering Drill
                                                  • Volume Discount

                                                  SANDVIK

                                                  CORO-DRILL 460-XM Tap Pilot Hole Chamfering Drill

                                                  [Features]General Purpose High Performance Carbide Solid Drill· Coolant Through
                                                  Ler mais
                                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                  3.35 ~ 6.9-General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Carbide142End Mill ShankAvailableOtherAvailable
                                                  Preço (excluindo IVA) a partir de:
                                                  135.06 €
                                                  Data de envio regular:
                                                  6 dias úteis
                                                  Configurar
                                                • Solid Carbide Drill 2D Type AD-2D
                                                  • Volume Discount

                                                  OSG

                                                  Solid Carbide Drill 2D Type AD-2D

                                                  [Features]· Carbide 2D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
                                                  Ler mais
                                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                  2 ~ 1214 ~ 55General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎]Carbide62 ~ 102End Mill ShankAvailableOtherN/A
                                                  Preço (excluindo IVA) a partir de:
                                                  37.21 €
                                                  Data de envio regular:
                                                  6 dias úteis
                                                  Configurar
                                                • Solid Carbide Drill 4D Type AD-4D
                                                  • Volume Discount

                                                  OSG

                                                  Solid Carbide Drill 4D Type AD-4D

                                                  [Features]· Carbide 4D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
                                                  Ler mais
                                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                  2 ~ 2020 ~ 101General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎]Carbide66 ~ 153End Mill ShankAvailableOtherN/A
                                                  Preço (excluindo IVA) a partir de:
                                                  43.71 €
                                                  Data de envio regular:
                                                  6 dias úteis
                                                  Configurar
                                                • Solid Carbide Drill 8D Type With Oil Hole ADO-8D

                                                    OSG

                                                    Solid Carbide Drill 8D Type With Oil Hole ADO-8D

                                                    [Features]· Carbide 8D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes
                                                    Ler mais
                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                    3 ~ 1333 ~ 143General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Carbide80 ~ 206End Mill ShankAvailableOtherAvailable
                                                    Preço (excluindo IVA) a partir de:
                                                    89.32 €
                                                    Data de envio regular:
                                                    6 dias úteis
                                                    Configurar
                                                  • Solid Carbide Drill 20D Type With Oil Hole ADO-20D
                                                    • Volume Discount

                                                    OSG

                                                    Solid Carbide Drill 20D Type With Oil Hole ADO-20D

                                                    [Features]· Carbide 20D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes
                                                    Ler mais
                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                    3 ~ 1270 ~ 270General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]Carbide120 ~ 330End Mill ShankAvailableOtherAvailable
                                                    Preço (excluindo IVA) a partir de:
                                                    148.48 €
                                                    Data de envio regular:
                                                    6 dias úteis
                                                    Configurar
                                                  • MUGEN Flat Drill MFD
                                                    • Volume Discount

                                                    NS TOOL

                                                    MUGEN Flat Drill MFD

                                                    [Features]· MUGEN Flat Drill makes drilling holes in inclined or curved surfaces easy.· Adopts a thinning shape (spiral thinning (⌀1 to ⌀2.9) / triple thinning (⌀3 to ⌀6)) developed to suit each size, a double margin (⌀2.6 or more), and a long neck shape to achieve holes with good and stable accuracy.· MFD has a flat bottom blade that flattens out the bottoms of blind holes and is optimal for counterbore machining and thread cutting (thread milling) pilot holes.· Through-holes can be drilled without the generation of burrs.· Adopts a reliable MUGEN coating to support a range of work material from mild steel to stainless steel.· Reduce drilling process time and improve machining efficiency with this 1 tool.
                                                    Ler mais
                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                    1 ~ 1.92 ~ 11.8General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[○]Carbide55End Mill ShankAvailableTiAlNN/A
                                                    Preço (excluindo IVA) a partir de:
                                                    52.40 €
                                                    Data de envio regular:
                                                    6 dias úteis
                                                    Configurar
                                                  • Aqua Drill EX Power Feed 2D PF2D

                                                      NACHI(FUJIKOSHI)

                                                      Aqua Drill EX Power Feed 2D PF2D

                                                      [Features]· A 2D drill bit that realizes high accuracy, long life machining with ultra-high feed machining with machining centers or lathes that can easily become clogged with scrap.
                                                      Ler mais
                                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                      -8General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide45 ~ 54End Mill ShankAvailableOther-
                                                      Preço (excluindo IVA) a partir de:
                                                      109.68 €
                                                      Data de envio regular:
                                                      6 dias úteis
                                                      Configurar
                                                    • Aqua Drill EX Power Feed 4D PF4D

                                                        NACHI(FUJIKOSHI)

                                                        Aqua Drill EX Power Feed 4D PF4D

                                                        [Features]· A 4D drill bit that realizes high accuracy, long life machining with ultra-high feed machining with machining centers or lathes that can easily become clogged with scrap.
                                                        Ler mais
                                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                        --General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide98End Mill ShankAvailableOther-
                                                        Preço (excluindo IVA) a partir de:
                                                        157.26 €
                                                        Data de envio regular:
                                                        6 dias úteis
                                                        Configurar
                                                      • Solid Drill (with Oil Hole) for Ultra-Hard Steel, For 5D SDOX5A
                                                        • Volume Discount

                                                        OKAZAKI SEIKO

                                                        Solid Drill (with Oil Hole) for Ultra-Hard Steel, For 5D SDOX5A

                                                        [Features]· Ideal for machining stainless steel and other difficult-to-cut materials.· New design of the tip shape and new flute shape realize smooth cutting powder ejection[Specifications]· Coolant through specification (with OH)· For 5D
                                                        Ler mais
                                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                        3.85 ~ 11.85-General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎]Carbide-End Mill ShankAvailableTiAlNAvailable
                                                        Preço (excluindo IVA) a partir de:
                                                        77.11 €
                                                        Data de envio regular:
                                                        10 dias úteis
                                                        Configurar
                                                      • Solid Drill (Heavy Duty Type) for Ultra-Hard Steel, For 4D SDX4A
                                                        • Volume Discount

                                                        OKAZAKI SEIKO

                                                        Solid Drill (Heavy Duty Type) for Ultra-Hard Steel, For 4D SDX4A

                                                        [Features]· New design of the tip shape and new flute shape realize smooth cutting powder ejection[Specifications]· External lubrication specification· For 4D
                                                        Ler mais
                                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                        3.85 ~ 11.85-General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]Carbide-End Mill ShankAvailableTiAlNN/A
                                                        Preço (excluindo IVA) a partir de:
                                                        42.55 €
                                                        Data de envio regular:
                                                        8 dias úteis
                                                        Configurar
                                                      • Toglon Hard Long Drill 30D ALT Coating

                                                          IWATA TOOL

                                                          Toglon Hard Long Drill 30D ALT Coating

                                                          It has excellent roundness, cylindricity, and surface coarseness, and holes such as ejector pins can be drilled without pilot holes, leading to workload reduction and short delivery time.
                                                          Ler mais
                                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                          --Quenched and tempered steel[◎] / High Hardness Steel[◎] / Machinable Ceramics[○]Carbide-End Mill ShankAvailableTiAlNN/A
                                                          Preço (excluindo IVA) a partir de:
                                                          128.73 €
                                                          Data de envio regular:
                                                          6 dias úteis
                                                          Configurar
                                                        • UTDF 2-Flute Flat Drill

                                                            UNION TOOL

                                                            UTDF 2-Flute Flat Drill

                                                            [Features] · The 180° tip angle design allows for hole drilling in various applications that are difficult with a normal drill. · Adopts a 30° torsion angle for stable and high efficiency hole drilling with excellent chip discharge. · Has a thinned shape for improved chip discharging and sharpness. · The guiding effect of the double margin to the inner wall of the hole ensures straightness during hole drilling, even for non-planar shapes. · Product lineup to accommodate various tap pilot hole diameter sizes.
                                                            Ler mais
                                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                            2.5 ~ 1110 ~ 36General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]Carbide50 ~ 100End Mill ShankAvailableFor General Steels (AlCrN, etc.)N/A
                                                            Preço (excluindo IVA) a partir de:
                                                            67.54 €
                                                            Data de envio regular:
                                                            6 dias úteis
                                                            Configurar