Registar

Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Condições de filtragem

Limpar tudo

  • Estoque
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • work material
  • Tool Material Type
  • Shank Type
  • Coating Y/N
  • Drill Bits (Shank Type: End Mill Shank página 4)

    Drill bits are a type of cutting tool to drill holes in work materials. They are used with machine tools such as drill press, lathe, milling machine and machining center. Drill bit materials include alloy carbide, high speed steel powder, high-speed steel, and some of them have coatings such as silicone-based, TiAlN-based, TiCN-based, TiN-based coatings, or surface treatment such as steam oxide treatment for enhanced oil retention on surface. Additionally, there is also a type of machining called thinning, given to the bit tip to reduce the thrust load applied to it when drilling. There are different shapes of thinning such as X-shape (for machining deep holes), R-shape (for machining stainless-steel-based workpieces) and S-shaped (for machining cast-iron- or non-ferrous-based workpieces); each one of them is used accordingly for different features and applications. In recent years, flat drill bits, which can drill holes without bending even on round surfaces, are attracting attention.
    • Carbide V Drill, ±0.02 Short Size
      • Volume Discount

      OMIKOGYO

      Carbide V Drill, ±0.02 Short Size

      For more precise, more efficient operation. Twisted V drill to support next generation high speed machining. A drill with oil hole that makes full use of state-of-the-art technology.
      Ler mais
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      7.9842Cast Iron[○] / Aluminum[○] / Copper[○]Carbide85End Mill ShankN/A-N/A
      Preço (excluindo IVA) a partir de:
      169.05 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • Carbide Twisted V Drill, Long Size for Models H7-H8
      • Volume Discount

      OMIKOGYO

      Carbide Twisted V Drill, Long Size for Models H7-H8

      For more precise, more efficient operation. Twisted V drill to support next generation high speed machining. A drill with oil hole that makes full use of state-of-the-art technology.
      Ler mais
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      10115Cast Iron[○] / Aluminum[○] / Copper[○]Carbide165End Mill ShankN/A-Available
      Preço (excluindo IVA) a partir de:
      320.66 €
      Data de envio regular:
      10 dias úteis
      Configurar
    • End Mill Shank Type 3 x D RT100U 5514
      • Volume Discount

      GUHRING

      End Mill Shank Type 3 x D RT100U 5514

      [Features]· Supports a wide range of machining and enables high-efficiency, high-speed machining.
      Ler mais
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 2020 ~ 79General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]Carbide62 ~ 131End Mill ShankAvailableOtherN/A
      Preço (excluindo IVA) a partir de:
      90.09 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • End Mill Shank Drill 3 × D, with Oil Hole RT100U 5510
      • Volume Discount

      GUHRING

      End Mill Shank Drill 3 × D, with Oil Hole RT100U 5510

      [Features]· Internal lubrication enables high performance drilling without steps.
      Ler mais
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 2020 ~ 79General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]Carbide62 ~ 131End Mill ShankAvailableOtherAvailable
      Preço (excluindo IVA) a partir de:
      117.85 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • End Mill Shank Drill 5 X D 3-Flute FT200G 5518

        GUHRING

        End Mill Shank Drill 5 X D 3-Flute FT200G 5518

        Has 3 cutting edges for excellent cutting balance, enabling highly circular, highly accurate, high-efficiency drilling.
        Ler mais
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        3 ~ 2028 ~ 101-Carbide66 ~ 153End Mill ShankN/A-N/A
        Preço (excluindo IVA) a partir de:
        105.37 €
        Data de envio regular:
        8 dias úteis
        Configurar
      • End Mill Shank Type 5xD RT100U 5515
        • Volume Discount

        GUHRING

        End Mill Shank Type 5xD RT100U 5515

        [Features]· Supports a wide range of machining and enables high-efficiency, high-speed machining.
        Ler mais
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        3 ~ 2028 ~ 101General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]Carbide66 ~ 153End Mill ShankAvailableOtherN/A
        Preço (excluindo IVA) a partir de:
        105.48 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • End Mill Shank Drill 5 × D with Oil Hole RT100U 5511
        • Volume Discount

        GUHRING

        End Mill Shank Drill 5 × D with Oil Hole RT100U 5511

        [Features]· Internal lubrication enables high performance drilling without steps.
        Ler mais
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        3 ~ 2028 ~ 101General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]Carbide66 ~ 153End Mill ShankAvailableOtherAvailable
        Preço (excluindo IVA) a partir de:
        111.73 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • End Mill Shank Drill 7 X D for Cast Iron Only RT100R 6502

          GUHRING

          End Mill Shank Drill 7 X D for Cast Iron Only RT100R 6502

          Blade shape suitable for FC/FCD and with rounded corners for excellent abrasion resistance, also reducing burrs on the far side when machining through holes. Longer life than conventional FC drills. Internal lubrication enables high performance drilling without steps.
          Ler mais
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          4 ~ 2037.5 ~ 190-Carbide75 ~ 244End Mill ShankAvailableOtherAvailable
          Preço (excluindo IVA) a partir de:
          222.32 €
          Data de envio regular:
          8 dias úteis
          Configurar
        • End Mill Shank Drill 7 x D with Oil Hole RT100U 5512

            GUHRING

            End Mill Shank Drill 7 x D with Oil Hole RT100U 5512

            Internal lubrication enables high performance drilling without steps.
            Ler mais
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            3 ~ 2030 ~ 190General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Carbide70 ~ 244End Mill ShankAvailableOtherAvailable
            Preço (excluindo IVA) a partir de:
            161.89 €
            Data de envio regular:
            8 dias úteis
            Configurar
          • End Mill Shank Drill Stub GU500 512
            • Volume Discount

            GUHRING

            End Mill Shank Drill Stub GU500 512

            This highly versatile coated drill can handle materials from general steel and nonferrous metals to cast iron and stainless steel.
            Ler mais
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            2 ~ 9.612 ~ 43General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[○] / Resin[○]Cobalt HSS44 ~ 93End Mill ShankAvailableTiNN/A
            Preço (excluindo IVA) a partir de:
            15.78 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • End Mill Shank Drill Regular GU500 511
            • Volume Discount

            GUHRING

            End Mill Shank Drill Regular GU500 511

            This highly versatile coated drill can handle materials from general steel and nonferrous metals to cast iron and stainless steel.
            Ler mais
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            2 ~ 2024 ~ 125General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[○] / Resin[○]Cobalt HSS56 ~ 191End Mill ShankAvailableTiNN/A
            Preço (excluindo IVA) a partir de:
            16.92 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • End Mill Shank Drill Straight Groove Type 10 X D with Oil Hole, RT150 GG, Double Margin 5513

              GUHRING

              End Mill Shank Drill Straight Groove Type 10 X D with Oil Hole, RT150 GG, Double Margin 5513

              Straight groove and double margin provide excellent rectilinearity ideal for machining castings, angled drilling, etc. up to 10 x D.
              Ler mais
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              3 ~ 1642 ~ 207-Carbide91 ~ 260End Mill ShankN/A-Available
              Preço (excluindo IVA) a partir de:
              138.06 €
              Data de envio regular:
              8 dias úteis
              Configurar
            • CoroDrill Delta-C, Carbide Solid Drill

                SANDVIK

                CoroDrill Delta-C, Carbide Solid Drill

                Solid drill providing high accuracy surface roughness ideal for drilling any kind of workpiece.
                Ler mais
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                13 ~ 14.556 ~ 59General Steel[○] / High Hardness Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Carbide124 ~ 133End Mill ShankAvailableTiAlNAvailable
                Preço (excluindo IVA) a partir de:
                493.06 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • EZ Drill for Use with Heat-Resistant Alloy (EZS Type)

                  DIJET

                  EZ Drill for Use with Heat-Resistant Alloy (EZS Type)

                  [Features]· It is a tool with excellent abrasion resistance.
                  Ler mais
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  3.2 ~ 11.918 ~ 60General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[◎]Carbide71 ~ 122End Mill ShankAvailable-Available
                  Preço (excluindo IVA) a partir de:
                  123.28 €
                  Data de envio regular:
                  8 dias úteis
                  Configurar
                • S-Cut Drill SCDMS / L

                    DIJET

                    S-Cut Drill SCDMS / L

                    It has good wear resistance and chip removal, can be used for a wide range of materials and is abrasion resistant, corrosion resistant and heat resistant.
                    Ler mais
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    10 ~ 3035 ~ 180General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]Carbide93 ~ 270End Mill ShankAvailableTiNAvailable
                    Preço (excluindo IVA) a partir de:
                    220.92 €
                    Data de envio regular:
                    8 dias úteis
                    Configurar
                  • Drill SDS-CR1

                      DIJET

                      Drill SDS-CR1

                      [Features]· It is a tool with excellent abrasion resistance.
                      Ler mais
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      0.57General Steel[○] / Cast Iron[◎] / Aluminum[○]Carbide40End Mill ShankN/ANon-CoatedN/A
                      Preço (excluindo IVA) a partir de:
                      16.65 €
                      Data de envio regular:
                      6 dias úteis
                      Configurar
                    • Top Solid Drill for Cast Iron TOP-SLD

                        DIJET

                        Top Solid Drill for Cast Iron TOP-SLD

                        As it is made of carbide, it has a high hardness and modulus of elasticity and can be used for machining castings.
                        Ler mais
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        6 ~ 24.565 ~ 170Cast Iron[○]Carbide120 ~ 250End Mill ShankN/ANon-CoatedN/A
                        Preço (excluindo IVA) a partir de:
                        177.54 €
                        Data de envio regular:
                        8 dias úteis
                        Configurar
                      • PCD Drill DRD-2

                          KYOWA SEIKO

                          PCD Drill DRD-2

                          The solid PCD cutting edge is spiral shaped. Machining is possible for non-ferrous metals through hard-to-cut materials such as ceramics.
                          Ler mais
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          0.3 ~ 34 ~ 10Aluminum[◎] / Copper[◎] / Graphite[◎] / Resin[○]PCD38End Mill ShankN/A-N/A
                          Preço (excluindo IVA) a partir de:
                          395.50 €
                          Data de envio regular:
                          8 dias úteis
                          Configurar
                        • Carbide Solid Pivot Type Drill DLC Coat Specifications KDR -DLC

                            KYOWA SEIKO

                            Carbide Solid Pivot Type Drill DLC Coat Specifications KDR -DLC

                            [Specifications]· Shape: Straight Shank / End Mill Shank Drill (carbide)· Material: Micro Grain Alloy· Work Materials: Aluminum [◎], Copper [◎], Resin [◎]
                            Ler mais
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.09 ~ 30.9 ~ 25Aluminum[◎] / Copper[◎] / Resin[◎]Carbide38 ~ 50End Mill ShankAvailableDLCN/A
                            Preço (excluindo IVA) a partir de:
                            64.18 €
                            Data de envio regular:
                            6 dias úteis
                            Configurar
                          • Carbide Solid Pivot Type Drill KDR-2
                            • Volume Discount

                            KYOWA SEIKO

                            Carbide Solid Pivot Type Drill KDR-2

                            [Specifications]· Shape: Straight Shank / End Mill Shank Drill (carbide)· Material: Micro Grain Alloy· Work materials: General steel [◎] / tempered steel [○] / stainless steel [◎] / aluminum [○]
                            Ler mais
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.03 ~ 30.3 ~ 25General Steel[○] / Quenched and tempered steel[○] / Aluminum[○]Carbide38 ~ 50End Mill ShankN/A-N/A
                            Preço (excluindo IVA) a partir de:
                            34.39 €
                            Data de envio regular:
                            8 dias úteis
                            Configurar
                          • Carbide Solid Pivot Type Flat Drill KDR-F
                            • Volume Discount

                            KYOWA SEIKO

                            Carbide Solid Pivot Type Flat Drill KDR-F

                            [Specifications]· Shape: Straight Shank / End Mill Shank Drill (carbide)· Material: Micro Grain Alloy· Work materials: General steel [◎] / tempered steel [○] / stainless steel [◎] / cast iron [◎] / aluminum [○] / copper [○] / resin [○]
                            Ler mais
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.5 ~ 35 ~ 24General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○]Carbide38 ~ 50End Mill ShankN/A-N/A
                            Preço (excluindo IVA) a partir de:
                            40.99 €
                            Data de envio regular:
                            6 dias úteis
                            Configurar
                          • Carbide Drill with Step and 90° Chamfering Blade KDD-2
                            • Volume Discount

                            KYOWA SEIKO

                            Carbide Drill with Step and 90° Chamfering Blade KDD-2

                            Both tip diameter and large diameter have torsional angle of 30°. Lineup of tip diameters from φ0.5 to φ6 in 0.05 increments.
                            Ler mais
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.5 ~ 62 ~ 25General Steel[○] / Quenched and tempered steel[○] / Aluminum[○]-50 ~ 80End Mill ShankN/A-N/A
                            Preço (excluindo IVA) a partir de:
                            80.14 €
                            Data de envio regular:
                            6 dias úteis
                            Configurar
                          • 3-Flute Oil Hole Carbide 10D Type TRS-HO-10D
                            • Volume Discount

                            OSG

                            3-Flute Oil Hole Carbide 10D Type TRS-HO-10D

                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            5.5 ~ 11.578 ~ 155General Steel[◎] / Cast Iron[◎]Carbide128 ~ 215End Mill ShankAvailableOtherAvailable
                            Preço (excluindo IVA) a partir de:
                            122.96 €
                            Data de envio regular:
                            6 dias úteis
                            Configurar
                          • P5D for Phoenix Series Phoenix Drills 5D

                              OSG

                              P5D for Phoenix Series Phoenix Drills 5D

                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              21 ~ 33.5120 ~ 183-Carbide184 ~ 261End Mill ShankN/ANon-CoatedN/A
                              Preço (excluindo IVA) a partir de:
                              537.60 €
                              Data de envio regular:
                              6 dias úteis
                              Configurar
                            • Aqua Drill EX Semi-Long AQDEXSL

                                NACHI(FUJIKOSHI)

                                Aqua Drill EX Semi-Long AQDEXSL

                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                224General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide56End Mill ShankAvailableOtherN/A
                                Preço (excluindo IVA) a partir de:
                                117.76 €
                                Data de envio regular:
                                6 dias úteis
                                Configurar
                              • AQDEXZOH3D Aqua Drill EX Flat Oil Hole 3D

                                  NACHI(FUJIKOSHI)

                                  AQDEXZOH3D Aqua Drill EX Flat Oil Hole 3D

                                  Can perform highly efficient flat hole drilling up to a hole depth of 3D. Drill with lubricant hole capable of working stainless steel.
                                  Ler mais
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  6.530General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]Carbide88End Mill ShankAvailableOtherAvailable
                                  Preço (excluindo IVA) a partir de:
                                  147.24 €
                                  Data de envio regular:
                                  6 dias úteis
                                  Configurar
                                • 2D Type Indexable Drill, P2D

                                    OSG

                                    2D Type Indexable Drill, P2D

                                    Indexable drills that can stably perform hole drilling with 2D depth.
                                    Ler mais
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    21 ~ 33.5-General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide121 ~ 160End Mill ShankN/ANon-CoatedAvailable
                                    Preço (excluindo IVA) a partir de:
                                    316.60 €
                                    Data de envio regular:
                                    6 dias úteis
                                    Configurar
                                  • Indexable Drill 3D Type P3D

                                      OSG

                                      Indexable Drill 3D Type P3D

                                      Indexable insert drill that can perform stable drilling with 3D depth.
                                      Ler mais
                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                      21 ~ 50.5-General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide142 ~ 252End Mill ShankN/ANon-CoatedAvailable
                                      Preço (excluindo IVA) a partir de:
                                      355.70 €
                                      Data de envio regular:
                                      6 dias úteis
                                      Configurar
                                    • Indexable Drill 4D Type P4D

                                        OSG

                                        Indexable Drill 4D Type P4D

                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        21 ~ 33.5-General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide163 ~ 227End Mill ShankN/ANon-CoatedAvailable
                                        Preço (excluindo IVA) a partir de:
                                        505.90 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar
                                      • Aqua Drill EX Flat Long Shank AQDEXZLS

                                          NACHI(FUJIKOSHI)

                                          Aqua Drill EX Flat Long Shank AQDEXZLS

                                          Flat drill with a lower neck length of 10D and good hole drilling performance.
                                          Ler mais
                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                          3.7 ~ 7.918 ~ 36General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]Carbide100 ~ 120End Mill ShankAvailableOtherN/A
                                          Preço (excluindo IVA) a partir de:
                                          127.62 €
                                          Data de envio regular:
                                          6 dias úteis
                                          Configurar
                                        • Pivot Drill Semi-Long Blade

                                            ATOM

                                            Pivot Drill Semi-Long Blade

                                            Drill for precision and multiporous fine hole drilling with a minimum diameter of ø0.04 (diameter 0.04 mm). [Features] · Blade diameter tolerance +0 to -0.005. [Applications] · A wide range of materials are applicable, from general steel through to non-ferrous metals and resin.
                                            Ler mais
                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                            0.03 ~ 0.990.5 ~ 11General Steel[○/◎] / Quenched and tempered steel[○/◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] / Resin[○]Carbide38End Mill ShankN/ANon-CoatedN/A
                                            Preço (excluindo IVA) a partir de:
                                            32.57 €
                                            Data de envio regular:
                                            6 dias úteis
                                            Configurar
                                          • Micro Drill "NEO PRO" Semi-Long Blades
                                            • DESCONTO

                                            ATOM

                                            Micro Drill "NEO PRO" Semi-Long Blades

                                            A series that achieves stable long life developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
                                            Ler mais
                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                            0.04 ~ 0.990.6 ~ 11General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○]Carbide38End Mill ShankAvailableFor General Steels (AlCrN, etc.)N/A
                                            Preço (excluindo IVA) a partir de:
                                            41.11 €
                                            Preço especial
                                            Data de envio regular:
                                            Item em stock: 1 dia útil
                                            Alguns artigos podem ser enviados no próprio dia
                                            Configurar
                                          • Carbide 2-Flute Leading Drill 60° D921X

                                              7 LEADERS

                                              Carbide 2-Flute Leading Drill 60° D921X

                                              [Features]· 60° leading drill.· Prevents chipping of the tip by maintaining the tip part at 120°.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
                                              Ler mais
                                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                              0.5 ~ 201 ~ 40General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Carbide38 ~ 130End Mill Shank-Other-
                                              Preço (excluindo IVA) a partir de:
                                              32.24 €
                                              Data de envio regular:
                                              6 dias úteis
                                              Configurar
                                            • Carbide 2-Flute Leading Drill 90° D922X

                                                7 LEADERS

                                                Carbide 2-Flute Leading Drill 90° D922X

                                                [Features]· 90° leading drill.· Prevents the chipping of the tip.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
                                                Ler mais
                                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                2 ~ 64 ~ 12General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Carbide38 ~ 70End Mill Shank-Other-
                                                Preço (excluindo IVA) a partir de:
                                                32.24 €
                                                Data de envio regular:
                                                6 dias úteis
                                                Configurar
                                              • Carbide 2-Flute Leading Drill 90° Long AlTiN D932X

                                                  7 LEADERS

                                                  Carbide 2-Flute Leading Drill 90° Long AlTiN D932X

                                                  [Features]· 90° Long Shank Leading Drill· Prevents chipping of the tip by maintaining the tip part at 120°.· The long protrusion enables leading cutting.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
                                                  Ler mais
                                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                  3 ~ 209 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Carbide75 ~ 250End Mill Shank-Other-
                                                  Preço (excluindo IVA) a partir de:
                                                  47.90 €
                                                  Data de envio regular:
                                                  6 dias úteis
                                                  Configurar
                                                • Carbide 2-Flute Leading Drill 142° D924X

                                                    7 LEADERS

                                                    Carbide 2-Flute Leading Drill 142° D924X

                                                    [Features]· 142° Leading Drill· Use for centering machining for tip angle 140°drill.· Nanoparticle Multilayer Coating· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
                                                    Ler mais
                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                    0.5 ~ 201 ~ 40General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Carbide38 ~ 130End Mill Shank-Other-
                                                    Preço (excluindo IVA) a partir de:
                                                    32.24 €
                                                    Data de envio regular:
                                                    6 dias úteis
                                                    Configurar
                                                  • Solid Carbide Medium Type Drill for High-Speed Machining FS-GDN
                                                    • Volume Discount

                                                    OSG

                                                    Solid Carbide Medium Type Drill for High-Speed Machining FS-GDN

                                                    Carbide drill medium type for high-speed machining with excellent heat resistance and abrasion resistance.
                                                    Ler mais
                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                    3.5 ~ 4.530 ~ 36General Steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎]Carbide60 ~ 71End Mill ShankAvailableTiAlNN/A
                                                    Preço (excluindo IVA) a partir de:
                                                    92.70 €
                                                    Data de envio regular:
                                                    6 dias úteis
                                                    Configurar
                                                  • CORO-DRILL 460-XM Tap Pilot Hole Chamfering Drill
                                                    • Volume Discount

                                                    SANDVIK

                                                    CORO-DRILL 460-XM Tap Pilot Hole Chamfering Drill

                                                    [Features]General Purpose High Performance Carbide Solid Drill· Coolant Through
                                                    Ler mais
                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                    3.35 ~ 6.9-General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Carbide142End Mill ShankAvailableOtherAvailable
                                                    Preço (excluindo IVA) a partir de:
                                                    135.06 €
                                                    Data de envio regular:
                                                    6 dias úteis
                                                    Configurar
                                                  • Solid Carbide Drill 2D Type AD-2D
                                                    • Volume Discount

                                                    OSG

                                                    Solid Carbide Drill 2D Type AD-2D

                                                    [Features]· Carbide 2D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
                                                    Ler mais
                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                    2 ~ 1214 ~ 55General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎]Carbide62 ~ 102End Mill ShankAvailableOtherN/A
                                                    Preço (excluindo IVA) a partir de:
                                                    37.21 €
                                                    Data de envio regular:
                                                    6 dias úteis
                                                    Configurar
                                                  • Solid Carbide Drill 4D Type AD-4D
                                                    • Volume Discount

                                                    OSG

                                                    Solid Carbide Drill 4D Type AD-4D

                                                    [Features]· Carbide 4D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
                                                    Ler mais
                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                    2 ~ 2020 ~ 101General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎]Carbide66 ~ 153End Mill ShankAvailableOtherN/A
                                                    Preço (excluindo IVA) a partir de:
                                                    43.71 €
                                                    Data de envio regular:
                                                    6 dias úteis
                                                    Configurar
                                                  • Solid Carbide Drill 8D Type With Oil Hole ADO-8D

                                                      OSG

                                                      Solid Carbide Drill 8D Type With Oil Hole ADO-8D

                                                      [Features]· Carbide 8D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes
                                                      Ler mais
                                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                      3 ~ 1333 ~ 143General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Carbide80 ~ 206End Mill ShankAvailableOtherAvailable
                                                      Preço (excluindo IVA) a partir de:
                                                      89.32 €
                                                      Data de envio regular:
                                                      6 dias úteis
                                                      Configurar
                                                    • Solid Carbide Drill 20D Type With Oil Hole ADO-20D
                                                      • Volume Discount

                                                      OSG

                                                      Solid Carbide Drill 20D Type With Oil Hole ADO-20D

                                                      [Features]· Carbide 20D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes
                                                      Ler mais
                                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                      3 ~ 1270 ~ 270General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]Carbide120 ~ 330End Mill ShankAvailableOtherAvailable
                                                      Preço (excluindo IVA) a partir de:
                                                      148.48 €
                                                      Data de envio regular:
                                                      6 dias úteis
                                                      Configurar
                                                    • MUGEN Flat Drill MFD
                                                      • Volume Discount

                                                      NS TOOL

                                                      MUGEN Flat Drill MFD

                                                      [Features]· MUGEN Flat Drill makes drilling holes in inclined or curved surfaces easy.· Adopts a thinning shape (spiral thinning (⌀1 to ⌀2.9) / triple thinning (⌀3 to ⌀6)) developed to suit each size, a double margin (⌀2.6 or more), and a long neck shape to achieve holes with good and stable accuracy.· MFD has a flat bottom blade that flattens out the bottoms of blind holes and is optimal for counterbore machining and thread cutting (thread milling) pilot holes.· Through-holes can be drilled without the generation of burrs.· Adopts a reliable MUGEN coating to support a range of work material from mild steel to stainless steel.· Reduce drilling process time and improve machining efficiency with this 1 tool.
                                                      Ler mais
                                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                      1 ~ 1.92 ~ 11.8General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[○]Carbide55End Mill ShankAvailableTiAlNN/A
                                                      Preço (excluindo IVA) a partir de:
                                                      52.40 €
                                                      Data de envio regular:
                                                      6 dias úteis
                                                      Configurar
                                                    • Aqua Drill EX Power Feed 2D PF2D

                                                        NACHI(FUJIKOSHI)

                                                        Aqua Drill EX Power Feed 2D PF2D

                                                        [Features]· A 2D drill bit that realizes high accuracy, long life machining with ultra-high feed machining with machining centers or lathes that can easily become clogged with scrap.
                                                        Ler mais
                                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                        -8General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide45 ~ 54End Mill ShankAvailableOther-
                                                        Preço (excluindo IVA) a partir de:
                                                        109.68 €
                                                        Data de envio regular:
                                                        6 dias úteis
                                                        Configurar
                                                      • Aqua Drill EX Power Feed 4D PF4D

                                                          NACHI(FUJIKOSHI)

                                                          Aqua Drill EX Power Feed 4D PF4D

                                                          [Features]· A 4D drill bit that realizes high accuracy, long life machining with ultra-high feed machining with machining centers or lathes that can easily become clogged with scrap.
                                                          Ler mais
                                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                          --General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide98End Mill ShankAvailableOther-
                                                          Preço (excluindo IVA) a partir de:
                                                          157.26 €
                                                          Data de envio regular:
                                                          6 dias úteis
                                                          Configurar

                                                        Produtos recentemente visualizados