Registar

Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Condições de filtragem

Limpar tudo

  • Estoque
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • work material
  • Tool Material Type
  • Shank Type
  • Coating Y/N
    • Sweep Cut Drill Reamer Type 3 mm Shank

        ATOM

        Sweep Cut Drill Reamer Type 3 mm Shank

        Sweep Cut Drills drastically reduce the burrs produced with through-holes. [Features] · Suppresses hole bending. · Suppresses runout of the drill bit when biting in, realizing high hole position and hole diameter accuracy.
        Ler mais
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        0.1 ~ 31.2 ~ 25Aluminum[◎] / Resin[◎]Carbide38 ~ 50End Mill ShankN/ANon-CoatedN/A
        Preço (excluindo IVA) a partir de:
        67.02 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model
        • Volume Discount

        MISUMI

        TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model

        [Features] -Ideal for high-precision small-diameter drilling-The shank diameter is standardised at 3 mm and enables high-precision clamping-The combination of super-fine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.
        Ler mais
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        0.38 ~ 2.76 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide38End Mill ShankAvailableTiAlNN/A
        Preço (excluindo IVA) a partir de:
        36.61 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • Carbide Burnishing Drill, Straight Model

          MISUMI

          Carbide Burnishing Drill, Straight Model

          [Features] -Enables high-precision drilling of aluminium without pre-drilling-Tip diameter can be specified in units of 0.01mm and flute length in units of 0.1mm.
          Ler mais
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          00Cast Iron[○] / Aluminum[◎] / Copper[○]Carbide40 ~ 60End Mill ShankN/A-N/A
          Data de envio regular:
          8 dias úteis
          Configurar
        • TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular
          • Volume Discount

          MISUMI

          TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular

          [Features] -Due to its special shape, it has excellent cutting performance even in non-ferrous metals such as grey cast iron, ductile iron, aluminium alloys, brass and magnesium-Due to the spiral tip shape of the pointed bit part, drilling without centring is possible-Wide flute design promotes chip flow.
          Ler mais
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          5 ~ 1244 ~ 71Cast Iron[◎] / Aluminum[○] / Copper[○]Carbide82 ~ 118End Mill ShankAvailableTiAlNN/A
          Preço (excluindo IVA) a partir de:
          70.12 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • Carbide Step Drill Bit, With Custom Dimensions / Long Shank Type

            MISUMI

            Carbide Step Drill Bit, With Custom Dimensions / Long Shank Type

            [Features]・Introducing a long shank type with custom pilot diameter / large diameter dimensions to the lineup of customizable step drill bits with helical flutes.
            Ler mais
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            --General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Carbide-End Mill ShankN/A-N/A
            Data de envio regular:
            9 dias úteis
            Configurar
          • Carbide Micro Revolution Drill for Stainless Steel, MRS-GDL
            • Volume Discount

            OSG

            Carbide Micro Revolution Drill for Stainless Steel, MRS-GDL

            Long carbide drill bit with small diameter for machining stainless steel. Machining stainless steel provides stable durability.
            Ler mais
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            0.44 ~ 2.96 ~ 34.8Stainless Steel[◎]Carbide38 ~ 66End Mill ShankAvailableOtherN/A
            Preço (excluindo IVA) a partir de:
            33.20 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • Carbide Stub Type for Small Diameter / Precision Machining WX-MS-GDS
            • DESCONTO
            • Volume Discount

            OSG

            Carbide Stub Type for Small Diameter / Precision Machining WX-MS-GDS

            Achieves high accuracy and high efficiency very small diameter drilling of precision mechanical components, iInformation and communication components, etc.
            Ler mais
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            0.19 ~ 4.951.2 ~ 26General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]Carbide38 ~ 64End Mill ShankAvailableOtherN/A
            Preço (excluindo IVA) a partir de:
            31.40 €
            Preço especial
            Data de envio regular:
            Item em stock: 1 dia útil
            Alguns artigos podem ser enviados no próprio dia
            Configurar
          • C-UMD Iron and Steel Drill, Unimax Drill
            • Volume Discount

            UNION TOOL

            C-UMD Iron and Steel Drill, Unimax Drill

            [Features] -UT micro-coating.Tip angle 150-Tool material: carbide.
            Ler mais
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            0.11 ~ 2.851.2 ~ 12General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide38End Mill ShankAvailableOtherN/A
            Preço (excluindo IVA) a partir de:
            20.19 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • Carbide Drill High Hardness Steel with Oil Hole (From 55HRC)
            • Volume Discount

            OSG

            Carbide Drill High Hardness Steel with Oil Hole (From 55HRC)

            Suitable for steel materials and NI-based alloys up to 55 HRC. Achieves Long Life Processing with Oil Hole Specifications
            Ler mais
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            3.3 ~ 1232 ~ 96Quenched and tempered steel[◎] / High Hardness Steel[◎]Carbide78 ~ 156End Mill ShankAvailableOtherAvailable
            Preço (excluindo IVA) a partir de:
            159.00 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • Medium Type Carbide for High Hardness Steel FH-GDN

              OSG

              Medium Type Carbide for High Hardness Steel FH-GDN

              Developed For Crafting Small Diameter Holes in Hardened Steel And Shows its Best Performance When Crafting Deep (Approx. 7D) Holes
              Ler mais
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              0.3 ~ 22.5 ~ 18Quenched and tempered steel[○] / High Hardness Steel[◎]Carbide38 ~ 50End Mill ShankAvailableOtherN/A
              Preço (excluindo IVA) a partir de:
              57.45 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • Carbide Drill Carbide for High Hardness Steel (From 70HRC)
              • Volume Discount

              OSG

              Carbide Drill Carbide for High Hardness Steel (From 70HRC)

              Suitable for processing from 55-70 HRC. Drill for extra hard steel fusing stable processing with a proven cutting edge shape and high-dimensional coating for high hardness steel.
              Ler mais
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              2 ~ 11.912 ~ 76High Hardness Steel[◎]Carbide42 ~ 120End Mill ShankAvailableOtherN/A
              Preço (excluindo IVA) a partir de:
              102.10 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • Micro Drill, for Stainless Steel
              • DESCONTO

              ATOM

              Micro Drill, for Stainless Steel

              Realizes a long life with mild steel, hard-to-cut materials, SUS304, Kovar, inconel, Hastelloy, pure nickel, etc. High-rigidity design which prevents breakage of the drill when machining difficult-to-cut materials.
              Ler mais
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              0.1 ~ 31 ~ 15General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[◎]Carbide38 ~ 45End Mill ShankAvailableFor General Steels (AlCrN, etc.)N/A
              Preço (excluindo IVA) a partir de:
              37.72 €
              Preço especial
              Data de envio regular:
              Item em stock: 1 dia útil
              Alguns artigos podem ser enviados no próprio dia
              Configurar
            • Micro Drill Standard Tip Length
              • DESCONTO
              • Volume Discount

              ATOM

              Micro Drill Standard Tip Length

              A drill for precision multiporous machining. (Min. diameter φ0.02), Can be used for a wide range of applications including general steel, non-ferrous metals, and resins.
              Ler mais
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              0.02 ~ 30.2 ~ 25General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]Carbide38 ~ 50End Mill ShankN/ANon-CoatedN/A
              Preço (excluindo IVA) a partir de:
              28.41 €
              Preço especial
              Data de envio regular:
              Item em stock: 1 dia útil
              Alguns artigos podem ser enviados no próprio dia
              Configurar
            • Solid Carbide Drill 3D Type With Oil Hole ADO-3D
              • Volume Discount

              OSG

              Solid Carbide Drill 3D Type With Oil Hole ADO-3D

              [Features]· Carbide 3D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
              Ler mais
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              2 ~ 2012 ~ 100General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Carbide66 ~ 165End Mill ShankAvailableOtherAvailable
              Preço (excluindo IVA) a partir de:
              65.10 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • Solid Carbide Drill 10D Type with Oil Hole ADO-10D
              • Volume Discount

              OSG

              Solid Carbide Drill 10D Type with Oil Hole ADO-10D

              [Features]· Ultra-hard 10D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes
              Ler mais
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              3 ~ 1240 ~ 155General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]Carbide90 ~ 215End Mill ShankAvailableOtherAvailable
              Preço (excluindo IVA) a partir de:
              115.82 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • Solid Carbide Drill 15D Type With Oil Hole ADO-15D
              • Volume Discount

              OSG

              Solid Carbide Drill 15D Type With Oil Hole ADO-15D

              [Features]· Carbide 15D type drill with both high tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes
              Ler mais
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              3 ~ 1255 ~ 215General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]Carbide105 ~ 280End Mill ShankAvailableOtherAvailable
              Preço (excluindo IVA) a partir de:
              129.55 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • Carbide Burnishing Drill, Stepped Model

                MISUMI

                Carbide Burnishing Drill, Stepped Model

                [Features] -No complicated estimations required. It is possible to order the part number of the step drill without drawings.
                Ler mais
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                --Cast Iron[○] / Aluminum[◎] / Copper[○]Carbide40 ~ 60End Mill ShankN/A-N/A
                Data de envio regular:
                8 dias úteis
                Configurar
              • Aqua Drill EX Stub AQDEXS
                • Volume Discount

                NACHI(FUJIKOSHI)

                Aqua Drill EX Stub AQDEXS

                Super general-use drill capable of stable high efficiency machining in a range from medium low speed to high speed applications.
                Ler mais
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                2.1 ~ 12.910 ~ 49General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○]Carbide45 ~ 100End Mill ShankAvailableOther-
                Preço (excluindo IVA) a partir de:
                92.06 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • UTDLX UT Micro Coat, Unimax Drill, Long Blade

                  UNION TOOL

                  UTDLX UT Micro Coat, Unimax Drill, Long Blade

                  [Features]· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials· The newly designed drill shape and X-thinning provide improved impact fracture resistance (durability performance) and reduced variation when drilling multiple holes· The tip angle is set to 130° to suppress the burr height in through holes· Groove length 15 times larger than the diameter enables highly precise drilling of deep holes.
                  Ler mais
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  0.3 ~ 34.5 ~ 45General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide38 ~ 80End Mill ShankAvailableOtherN/A
                  Preço (excluindo IVA) a partir de:
                  35.95 €
                  Data de envio regular:
                  6 dias úteis
                  Configurar
                • Micro Drill "NEO PRO" Long Blades
                  • DESCONTO
                  • Volume Discount

                  ATOM

                  Micro Drill "NEO PRO" Long Blades

                  A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
                  Ler mais
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  0.03 ~ 30.6 ~ 40General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○]Carbide38 ~ 65End Mill ShankAvailableFor General Steels (AlCrN, etc.)N/A
                  Preço (excluindo IVA) a partir de:
                  46.50 €
                  Preço especial
                  Data de envio regular:
                  Item em stock: 1 dia útil
                  Alguns artigos podem ser enviados no próprio dia
                  Configurar
                • Solid Carbide Drill 5D Type with Oil Hole ADO-5D
                  • Volume Discount

                  OSG

                  Solid Carbide Drill 5D Type with Oil Hole ADO-5D

                  [Features]· Carbide 5D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
                  Ler mais
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  2 ~ 2018 ~ 160General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Carbide70 ~ 225End Mill ShankAvailableOtherAvailable
                  Preço (excluindo IVA) a partir de:
                  85.18 €
                  Data de envio regular:
                  6 dias úteis
                  Configurar
                • Solid Carbide Drill 30D Type With Oil Hole ADO-30D

                    OSG

                    Solid Carbide Drill 30D Type With Oil Hole ADO-30D

                    [Features]· Carbide 30D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes
                    Ler mais
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    3.5 ~ 10116 ~ 330General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]Carbide185 ~ 390End Mill ShankAvailableOtherAvailable
                    Preço (excluindo IVA) a partir de:
                    156.60 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • Solid Carbide Drill 5D Type With Oil Hole ADO-SUS-5D
                    • Volume Discount

                    OSG

                    Solid Carbide Drill 5D Type With Oil Hole ADO-SUS-5D

                    [Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 5D type with oil hole
                    Ler mais
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    2 ~ 2018 ~ 140General Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎]Carbide70 ~ 205End Mill ShankAvailableOtherAvailable
                    Preço (excluindo IVA) a partir de:
                    85.18 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular
                    • Volume Discount

                    MISUMI

                    TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular

                    [Features] -Capable of high feed and high speed cutting from general steel to stainless steel-The adoption of a wavy edge achieves outstanding sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape and R-type thinning-Suppresses chipping through the adoption of a bevel-edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance
                    Ler mais
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    3 ~ 1328 ~ 77General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○]Carbide66 ~ 124End Mill ShankAvailableTiAlNN/A
                    Preço (excluindo IVA) a partir de:
                    47.83 €
                    Data de envio regular:
                    5 dias úteis
                    Configurar
                  • TiAlN Coated Carbide Drill, Stub
                    • Volume Discount

                    MISUMI

                    TiAlN Coated Carbide Drill, Stub

                    [Features] -Designed with small core diameter to improve chip evacuation-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                    Ler mais
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    0.3 ~ 62 ~ 28General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]Carbide38 ~ 66End Mill ShankAvailableTiAlNN/A
                    Preço (excluindo IVA) a partir de:
                    23.28 €
                    Data de envio regular:
                    5 dias úteis
                    Configurar
                  • TiAlN Coated Carbide Drill, Regular Model with Oil Holes
                    • Volume Discount

                    MISUMI

                    TiAlN Coated Carbide Drill, Regular Model with Oil Holes

                    [Features] -Internal lubrication efficiently evacuates chips and improves tool life-Supports a wide range of materials, from general steel to stainless steel-Achieves excellent strength by adopting a straight cutting edge-Demonstrates high centripetal force by using three chip and X-type thinning-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.
                    Ler mais
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    3 ~ 1328 ~ 77General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]Carbide66 ~ 124End Mill ShankAvailableTiAlNAvailable
                    Preço (excluindo IVA) a partir de:
                    79.21 €
                    Data de envio regular:
                    5 dias úteis
                    Configurar
                  • TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular
                    • Volume Discount

                    MISUMI

                    TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular

                    [Features] -Weak helix angle and high core diameter improve the rigidity of the tool-Achieves excellent strength by using a straight cutting edge-Ideal for machining high hardness steels from HRC40 to 60-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                    Ler mais
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    3 ~ 1320 ~ 77Quenched and tempered steel[○] / High Hardness Steel[◎]Carbide62 ~ 124End Mill ShankAvailable-N/A
                    Preço (excluindo IVA) a partir de:
                    56.38 €
                    Data de envio regular:
                    5 dias úteis
                    Configurar
                  • Carbide Burnishing Drill Bit, Long Shank Type

                      MISUMI

                      Carbide Burnishing Drill Bit, Long Shank Type

                      [Features]・Ideal for step drilling aluminum.・Long shank types are now available.
                      Ler mais
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      --Cast Iron[○] / Aluminum[○] / Copper[○]Carbide-End Mill ShankN/A-N/A
                      Data de envio regular:
                      8 dias úteis
                      Configurar
                    • Aqua Drill FC AQDFC

                        NACHI(FUJIKOSHI)

                        Aqua Drill FC AQDFC

                        Ideal for long-life processing of FC, FCD and low carbon steel.
                        Ler mais
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        2.1 ~ 11.915 ~ 73General Steel[◎] / Cast Iron[◎]Carbide47 ~ 130End Mill ShankAvailableOtherN/A
                        Preço (excluindo IVA) a partir de:
                        107.64 €
                        Data de envio regular:
                        6 dias úteis
                        Configurar
                      • Aqua Drill EX Flat AQDEXZ

                          NACHI(FUJIKOSHI)

                          Aqua Drill EX Flat AQDEXZ

                          Countersinking drill with good drilling performance. Well suited for slanted surfaces and pilot drilling for tapping.
                          Ler mais
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          0.5 ~ 15.81.65 ~ 72General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]Carbide47 ~ 115End Mill ShankAvailableOtherN/A
                          Preço (excluindo IVA) a partir de:
                          84.64 €
                          Data de envio regular:
                          5 dias úteis
                          Configurar
                        • DLC Micro Drills DLCMD

                            NACHI(FUJIKOSHI)

                            DLC Micro Drills DLCMD

                            High speed wet processing and dry processing of aluminum alloy is possible. Aluminum drill for small diameter hole.
                            Ler mais
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            1.315Aluminum[◎] / Copper[○]Carbide47End Mill ShankAvailableDLCN/A
                            Preço (excluindo IVA) a partir de:
                            57.05 €
                            Data de envio regular:
                            10 dias úteis
                            Configurar
                          • Carbide Stub Type for High Hardness Steel FH-GDS

                              OSG

                              Carbide Stub Type for High Hardness Steel FH-GDS

                              Developed For Crafting Small Diameter Holes in Hardened Steel And is Suited For High Precision / Long Life Crafting of Shallow (Approx. 3D) Holes.
                              Ler mais
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              0.3 ~ 21.6 ~ 12Quenched and tempered steel[○] / High Hardness Steel[◎]Carbide38 ~ 46End Mill ShankAvailableOtherAvailable
                              Preço (excluindo IVA) a partir de:
                              52.37 €
                              Data de envio regular:
                              6 dias úteis
                              Configurar
                            • Medium Type Carbide for Machining Non-Ferrous Metals NF-GDN
                              • Volume Discount

                              OSG

                              Medium Type Carbide for Machining Non-Ferrous Metals NF-GDN

                              Achieves High Cost Performance in High Speed Hole Drilling of Cast Aluminum, Die Cast Aluminum, Malleable Aluminum etc. Used Extensively in Automobile / Airplane Manufacturing
                              Ler mais
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              3.1 ~ 1327 ~ 76Cast Iron[◎] / Aluminum[◎] / Copper[○]Carbide65 ~ 128End Mill ShankN/ANon-CoatedN/A
                              Preço (excluindo IVA) a partir de:
                              23.61 €
                              Data de envio regular:
                              6 dias úteis
                              Configurar
                            • NSPD Micro Point Drill (Pilot Hole Machining)
                              • Volume Discount

                              NS TOOL

                              NSPD Micro Point Drill (Pilot Hole Machining)

                              The tip is thinned to reduce cutting resistance. Stable Drilling Accuracy (φ0.025 or more)
                              Ler mais
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              0.01 ~ 0.10.015 ~ 0.2Stainless Steel[○] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]Carbide40End Mill ShankN/A-N/A
                              Preço (excluindo IVA) a partir de:
                              48.72 €
                              Data de envio regular:
                              6 dias úteis
                              Configurar
                            • GP Drill Short 5D ALT Coating
                              • Volume Discount

                              IWATA TOOL

                              GP Drill Short 5D ALT Coating

                              [Features]· Taking on ultra-high speed machining.· 0.25 seconds per hole, lifetime of 20,000 or more holes.· Allows non-step boring up to 3D hole depth (up to 7D in some situations).· High precision and super long life.
                              Ler mais
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              0.3 ~ 31.9 ~ 18.5General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]Carbide40 ~ 60End Mill ShankAvailableTiAlNN/A
                              Preço (excluindo IVA) a partir de:
                              40.04 €
                              Data de envio regular:
                              6 dias úteis
                              Configurar
                            • Toglon Hard Drill Regular ALT Coating
                              • DESCONTO
                              • Volume Discount

                              IWATA TOOL

                              Toglon Hard Drill Regular ALT Coating

                              · 3-flute blade design gives a finish with outstanding hole diameter accuracy and hole surface roughness.
                              Ler mais
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              1 ~ 66 ~ 36Quenched and tempered steel[◎] / High Hardness Steel[○/◎] / Machinable Ceramics[○]Carbide50 ~ 120End Mill ShankAvailableTiAlNN/A
                              Preço (excluindo IVA) a partir de:
                              89.60 €
                              Preço especial
                              Data de envio regular:
                              Item em stock: 1 dia útil
                              Alguns artigos podem ser enviados no próprio dia
                              Configurar
                            • Toglon Hard Long Drill 20D ALT Coating

                                IWATA TOOL

                                Toglon Hard Long Drill 20D ALT Coating

                                [Features]· Realizes through-holes of 20D or more in quenched steel.· H7 or greater accuracy is possible due to the extremely high circularity and cylindricity and excellent surface roughness.· Can also machine mold ejector pin holes, etc., in one go without a pilot hole.· Reduced processes can help to shorten lead time.
                                Ler mais
                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                1.1 ~ 66.6 ~ 36Quenched and tempered steel[◎] / High Hardness Steel[○/◎] / Machinable Ceramics[○]Carbide60 ~ 200End Mill ShankAvailableTiAlNN/A
                                Preço (excluindo IVA) a partir de:
                                97.11 €
                                Data de envio regular:
                                6 dias úteis
                                Configurar
                              • Sweep Cut Drill Straight Shank

                                  ATOM

                                  Sweep Cut Drill Straight Shank

                                  Drastically reduces the burrs of through holes. Achieves high hole position and hole diameter precision by suppressing bit runout and deflection when biting. Suppresses hole bending.
                                  Ler mais
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  1 ~ 616 ~ 50Aluminum[◎] / Resin[◎]Carbide50 ~ 102End Mill ShankN/ANon-CoatedN/A
                                  Preço (excluindo IVA) a partir de:
                                  47.90 €
                                  Data de envio regular:
                                  6 dias úteis
                                  Configurar
                                • Hi-Spec Micro Drill
                                  • DESCONTO
                                  • Volume Discount

                                  ATOM

                                  Hi-Spec Micro Drill

                                  The intermediate size of the drill diameter 0.01 mm increment size is standardized. High-spec and high-precision drill, keeping runout accuracy and lip height difference that affect hole accuracy within 2 microns.
                                  Ler mais
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  0.035 ~ 1.9950.4 ~ 22General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]Carbide38 ~ 50End Mill ShankN/ANon-CoatedN/A
                                  Preço (excluindo IVA) a partir de:
                                  40.91 €
                                  Preço especial
                                  Data de envio regular:
                                  Item em stock: 1 dia útil
                                  Alguns artigos podem ser enviados no próprio dia
                                  Configurar
                                • End Mill Shank Drill 12 X D, with Oil Hole, RT 100 Double Margin 5525

                                    GUHRING

                                    End Mill Shank Drill 12 X D, with Oil Hole, RT 100 Double Margin 5525

                                    The use of a double margin provides excellent straightness and enables highly accurate deep drilling. Internal lubrication enables high performance drilling without steps.
                                    Ler mais
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    3 ~ 2050 ~ 258-Carbide90 ~ 310End Mill ShankAvailableOtherAvailable
                                    Preço (excluindo IVA) a partir de:
                                    195.81 €
                                    Data de envio regular:
                                    8 dias úteis
                                    Configurar
                                  • End Mill Shank Drill 3 X D for Carbide Processing H 1946

                                      GUHRING

                                      End Mill Shank Drill 3 X D for Carbide Processing H 1946

                                      High-rigidity design capable of drilling holes in hardened steel up to 70 HRC.
                                      Ler mais
                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                      3 ~ 1220 ~ 55-Carbide62 ~ 102End Mill ShankAvailableTiAlNN/A
                                      Preço (excluindo IVA) a partir de:
                                      145.25 €
                                      Data de envio regular:
                                      24 dias úteis
                                      Configurar
                                    • Carbide Flat Drill ADFLS-2D
                                      • Volume Discount

                                      OSG

                                      Carbide Flat Drill ADFLS-2D

                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                      3 ~ 1815 ~ 78General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]Carbide100 ~ 230End Mill ShankAvailableOtherN/A
                                      Preço (excluindo IVA) a partir de:
                                      89.70 €
                                      Data de envio regular:
                                      6 dias úteis
                                      Configurar
                                    • Solid Carbide Pilot Drill With Oil Hole For Extra-Long Drills ADO-PLT

                                        OSG

                                        Solid Carbide Pilot Drill With Oil Hole For Extra-Long Drills ADO-PLT

                                        [Features]· Carbide drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
                                        Ler mais
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        3.03 ~ 12.0315 ~ 60General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]Carbide65 ~ 120End Mill ShankAvailableOtherAvailable
                                        Preço (excluindo IVA) a partir de:
                                        98.10 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar
                                      • Solid Carbide Drill 3D Type With Oil Hole ADO-SUS-3D
                                        • Volume Discount

                                        OSG

                                        Solid Carbide Drill 3D Type With Oil Hole ADO-SUS-3D

                                        [Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 3D type with oil hole
                                        Ler mais
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        2.8 ~ 2017 ~ 100General Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎]Carbide66 ~ 165End Mill ShankAvailableOtherAvailable
                                        Preço (excluindo IVA) a partir de:
                                        65.10 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar
                                      • VariDrill Solid Carbide Drill 8xD VDS403A

                                          WIDIA

                                          VariDrill Solid Carbide Drill 8xD VDS403A

                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                          556General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Carbide94End Mill ShankAvailableTiAlNAvailable
                                          Preço (excluindo IVA) a partir de:
                                          183.16 €
                                          Data de envio regular:
                                          6 dias úteis
                                          Configurar

                                        Produtos recentemente visualizados