Carbide Drills (With/without Oil Hole: Available)

• 

  Straight Shank / End Mill Shank Drills (Carbide) (74)

• 

  Taper Shank Drills (Carbide)

• 

  Step Drills (Carbide) (1)

• 

  • Volume Discount

  OSG

  Solid Carbide Drill 10D Type with Oil Hole ADO-10D

  [Features]· Ultra-hard 10D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 12	40 ～ 155	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]	Carbide	90 ～ 215	End Mill Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  115.82 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  GUHRING

  Gun Drill 50 X D EB100 5647

  A gun drill integrally made from solid carbide from head to shank. Shrink fit tool holders can also be used.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  2.5 ～ 8	155 ～ 440	-	Carbide	185 ～ 485	-	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  321.34 €

  Data de envio regular:

  24 dias úteis

  Configurar
• 

  • Volume Discount

  OSG

  Solid Carbide Drill 5D Type with Oil Hole ADO-5D

  [Features]· Carbide 5D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  2 ～ 20	18 ～ 160	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Carbide	70 ～ 225	End Mill Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  85.18 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  OSG

  Solid Carbide Drill 15D Type With Oil Hole ADO-15D

  [Features]· Carbide 15D type drill with both high tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 12	55 ～ 215	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]	Carbide	105 ～ 280	End Mill Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  129.55 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  OSG

  Solid Carbide Drill 3D Type With Oil Hole ADO-SUS-3D

  [Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 3D type with oil hole

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  2.8 ～ 20	17 ～ 100	General Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎]	Carbide	66 ～ 165	End Mill Shank / Straight Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  65.10 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  OSG

  Solid Carbide Drill 5D Type With Oil Hole ADO-SUS-5D

  [Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 5D type with oil hole

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  2 ～ 20	18 ～ 140	General Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎]	Carbide	70 ～ 205	End Mill Shank / Straight Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  85.18 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  OSG

  Extra Long Type Carbide with Oil Hole for High Hardness Mold Materials FTO-H-GDXL

  Achieves a stable and long tool life and high efficiency in 20D ultra-deep hole machining of high hardness mold material (45 ~ 55HRC)

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  6 ～ 10	140 ～ 230	High Hardness Steel[◎]	Carbide	190 ～ 280	Straight Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  227.50 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  OSG

  Carbide Drill High Hardness Steel with Oil Hole (From 55HRC)

  Suitable for steel materials and NI-based alloys up to 55 HRC. Achieves Long Life Processing with Oil Hole Specifications

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3.3 ～ 12	32 ～ 96	Quenched and tempered steel[◎] / High Hardness Steel[◎]	Carbide	78 ～ 156	End Mill Shank / Straight Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  159.00 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  OSG

  Solid Carbide Drill 30D Type With Oil Hole ADO-30D

  [Features]· Carbide 30D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3.5 ～ 10	116 ～ 330	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]	Carbide	185 ～ 390	End Mill Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  156.60 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  TiAlN Coated Carbide Drill, Regular Model with Oil Holes

  [Features] -Internal lubrication efficiently evacuates chips and improves tool life-Supports a wide range of materials, from general steel to stainless steel-Achieves excellent strength by adopting a straight cutting edge-Demonstrates high centripetal force by using three chip and X-type thinning-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 13	28 ～ 77	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	Carbide	66 ～ 124	End Mill Shank	Available	TiAlN	Available

  Preço (excluindo IVA) a partir de:

  79.21 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  TiAlN Coated Carbide Long Drill, Straight Shank

  Carbide long drill that achieves the high efficiency deep-hole drilling

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  5 ～ 10	60 ～ 140	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Carbide	100 ～ 200	Straight Shank	Available	TiAlN	Available

  Preço (excluindo IVA) a partir de:

  133.32 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  GUHRING

  MQL Long Drill 40 x D with Oil Hole RT100T 6514

  Specially designed MQL compatible groove shapes and blade tips, realizing high accuracy and high efficiency deep hole drilling.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 8	130 ～ 343	-	Carbide	170 ～ 383	-	Available	TiAlN	Available

  Preço (excluindo IVA) a partir de:

  414.08 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  GUHRING

  End Mill Shank Drill 12 X D, with Oil Hole, RT 100 Double Margin 5525

  The use of a double margin provides excellent straightness and enables highly accurate deep drilling. Internal lubrication enables high performance drilling without steps.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 20	50 ～ 258	-	Carbide	90 ～ 310	End Mill Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  195.81 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  GUHRING

  Gun Drill 25 X D EB100 5646

  A gun drill integrally made from solid carbide from head to shank. Shrink fit tool holders can also be used.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  2.5 ～ 12	85 ～ 360	-	Carbide	115 ～ 420	-	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  258.34 €

  Data de envio regular:

  24 dias úteis

  Configurar
• 

  GUHRING

  Micro Gun Drill EB100 5024

  The tube is a solid carbide type integrated with the head, which increases torsional strength and suppresses vibration during machining. The screwdriver diameter is metric to support oil hole holders for machining centers.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  1.2 ～ 3.2	45	-	Carbide	90 ～ 100	-	N/A	-	Available

  Preço (excluindo IVA) a partir de:

  306.08 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  GUHRING

  Micro Drill, 8 X D, Type-N 6408

  Improves chip disposal by increasing groove width, allowing stable small diameter deep hole milling. Equipped with cooling ducts for internal lubrication, ideal for deep hole machining

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  1.4 ～ 3	15 ～ 33	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Carbide	52 ～ 66	-	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  152.28 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  OSG

  Solid Carbide Drill 3D Type With Oil Hole ADO-3D

  [Features]· Carbide 3D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  2 ～ 20	12 ～ 100	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Carbide	66 ～ 165	End Mill Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  65.10 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)

  [Features] -Providing an edge with smoothing groove on the outer circumference, it is possible to perform hole drilling and hole finishing simultaneously-Supports a wide range of materials, from general steel to stainless steel-Internal lubricant supply efficiently removes chips and improves tool life (TAC-HBNESDR)-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 13	28 ～ 71	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	Carbide	66 ～ 124	End Mill Shank	Available	TiAlN	Available

  Preço (excluindo IVA) a partir de:

  71.64 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular

  [Features] -Internal lubrication efficiently evacuates chips and improves tool life-Capable of high feed and high speed cutting from general steel to stainless steel-Adopting a corrugated cutting edge achieves excellent sharpness and strength, and promotes chip evacuation-High-speed cutting is achieved by maintaining excellent strength and stability by adopting tapered shape and R-type thinning-Suppresses chipping by adopting chamfer treatment on the shoulder-By adopting diameter plus tolerance, it is effective for high-precision finishing of holes closer to hole tolerance

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  4.2 ～ 7	24 ～ 53	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○]	Carbide	66 ～ 91	End Mill Shank	Available	TiAlN	Available

  Preço (excluindo IVA) a partir de:

  107.05 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  NACHI(FUJIKOSHI)

  Aqua Drill EX Oil Hole 5D AQDEXOH5D

  Stable wet machining, can be MQL machining. For high efficiency drilling up to 5 times the drill diameter.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  2.5 ～ 8.7	20 ～ 72	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Titanium[○]	Carbide	68 ～ 127	End Mill Shank / Straight Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  116.24 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  NACHI(FUJIKOSHI)

  Aqua Drill EX Oil Hole 3D AQDEXOH3D

  Stable wet machining, can be MQL machining. For high efficiency drilling up to 3 times the drill diameter.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  7	35	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	Carbide	88	Straight Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  133.03 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  NACHI(FUJIKOSHI)

  Aqua Drill EX Oil Hole 8D AQDEXOH8D

  Stable wet machining, can be MQL machining. For high efficiency drilling up to 8 times the drill diameter.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  5.6	66	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	Carbide	118	End Mill Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  167.41 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  OSG

  Carbide Stub Type for High Hardness Steel FH-GDS

  Developed For Crafting Small Diameter Holes in Hardened Steel And is Suited For High Precision / Long Life Crafting of Shallow (Approx. 3D) Holes.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  0.3 ～ 2	1.6 ～ 12	Quenched and tempered steel[○] / High Hardness Steel[◎]	Carbide	38 ～ 46	End Mill Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  52.37 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  OSG

  Extra Long Type Carbide with Oil Hole for Copper / Aluminum CAO-GDXL

  Non-step machining of ultra-deep 15D - 30D holes. Achieves a Machining Efficiency and Tool Life Several Times that of Gun Drills and HSS Drills

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 10	55 ～ 265	Aluminum[◎] / Copper[○]	Carbide	105 ～ 315	End Mill Shank / Straight Shank	N/A	Non-Coated	Available

  Preço (excluindo IVA) a partir de:

  292.50 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  DIJET

  EZ Drill (for 3D) EZDM Type

  It is a tool with excellent abrasion resistance.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  11.1 ～ 15.9	58 ～ 80	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	Carbide	122 ～ 146	End Mill Shank	Available	TiCN	Available

  Preço (excluindo IVA) a partir de:

  245.97 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  DIJET

  EZ Drill (for 5D) EZDL Type

  It can handle a wide range of materials, from general steel to stainless steel and heat-resistant alloys, and has a structure that allows smooth chip flow and easy resharpening.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  11.1 ～ 15.9	92 ～ 128	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	Carbide	158 ～ 194	End Mill Shank	Available	TiCN	Available

  Preço (excluindo IVA) a partir de:

  281.35 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  DIJET

  F1 Reamer DX-DHSR Type

  It is a tool with excellent abrasion resistance.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 12	20 ～ 50	General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○]	-	70 ～ 135	End Mill Shank / Straight Shank	Available	TiCN	Available

  Preço (excluindo IVA) a partir de:

  221.19 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  • Volume Discount

  OMIKOGYO

  Carbide Twisted V Drill, Long Size for Models H7-H8

  For more precise, more efficient operation. Twisted V drill to support next generation high speed machining. A drill with oil hole that makes full use of state-of-the-art technology.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  10	115	Cast Iron[○] / Aluminum[○] / Copper[○]	Carbide	165	End Mill Shank	N/A	-	Available

  Preço (excluindo IVA) a partir de:

  320.66 €

  Data de envio regular:

  10 dias úteis

  Configurar
• 

  GUHRING

  MQL Long Drill 15 x D with Oil Hole RT100T 6509

  Specially designed MQL compatible groove shapes and blade tips, realizing high accuracy and high efficiency deep hole drilling.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 14	55 ～ 248	-	Carbide	95 ～ 297	-	Available	TiAlN	Available

  Preço (excluindo IVA) a partir de:

  243.48 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  GUHRING

  MQL Long Drill 20 x D with Oil Hole RT100T 6511

  Specially designed MQL compatible groove shapes and blade tips, realizing high accuracy and high efficiency deep hole drilling.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 14	70 ～ 318	-	Carbide	110 ～ 367	-	Available	TiAlN	Available

  Preço (excluindo IVA) a partir de:

  277.08 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  GUHRING

  MQL Long Drill 25 x D with Oil Hole RT100T 6512

  Specially designed MQL compatible groove shapes and blade tips, realizing high accuracy and high efficiency deep hole drilling.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 12	85 ～ 337	-	Carbide	125 ～ 386	-	Available	TiAlN	Available

  Preço (excluindo IVA) a partir de:

  303.98 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  GUHRING

  MQL Long Drill 30 x D with Oil Hole RT100T 6513

  Specially designed MQL compatible groove shapes and blade tips, realizing high accuracy and high efficiency deep hole drilling.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 10	100 ～ 327	-	Carbide	140 ～ 371	-	Available	TiAlN	Available

  Preço (excluindo IVA) a partir de:

  344.29 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  • Volume Discount

  GUHRING

  End Mill Shank Drill 3 × D, with Oil Hole RT100U 5510

  [Features]· Internal lubrication enables high performance drilling without steps.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 20	20 ～ 79	General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]	Carbide	62 ～ 131	End Mill Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  117.85 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  GUHRING

  End Mill Shank Drill 5 × D with Oil Hole RT100U 5511

  [Features]· Internal lubrication enables high performance drilling without steps.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 20	28 ～ 101	General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]	Carbide	66 ～ 153	End Mill Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  111.73 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  GUHRING

  End Mill Shank Drill 7 X D for Cast Iron Only RT100R 6502

  Blade shape suitable for FC/FCD and with rounded corners for excellent abrasion resistance, also reducing burrs on the far side when machining through holes. Longer life than conventional FC drills. Internal lubrication enables high performance drilling without steps.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  4 ～ 20	37.5 ～ 190	-	Carbide	75 ～ 244	End Mill Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  222.32 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  GUHRING

  End Mill Shank Drill 7 x D with Oil Hole RT100U 5512

  Internal lubrication enables high performance drilling without steps.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 20	30 ～ 190	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Carbide	70 ～ 244	End Mill Shank	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  161.89 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  GUHRING

  End Mill Shank Drill Straight Groove Type 10 X D with Oil Hole, RT150 GG, Double Margin 5513

  Straight groove and double margin provide excellent rectilinearity ideal for machining castings, angled drilling, etc. up to 10 x D.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 16	42 ～ 207	-	Carbide	91 ～ 260	End Mill Shank	N/A	-	Available

  Preço (excluindo IVA) a partir de:

  138.06 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  GUHRING

  Stainless Steel Drill 3 X D RT100VA 8510

  Offers high cutting speed and long service life when machining stainless steel, helping achieve highly precise hole drilling.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 20	20 ～ 79	-	Carbide	62 ～ 131	-	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  112.94 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  GUHRING

  Stainless Steel Drill 5 X D RT100VA 8511

  Offers high cutting speed and long service life when machining stainless steel, helping achieve highly precise hole drilling.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 20	28 ～ 101	-	Carbide	66 ～ 153	-	Available	Other	Available

  Preço (excluindo IVA) a partir de:

  129.18 €

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  GUHRING

  Straight Shank Drill Long Total Length 250 mm GT100 J694

  [Features]· Improves chip dischargeability in mirror finishing of grooves, and offers excellent welding resistance in aluminum machining.· Internal lubrication enables high performance deep hole drilling without steps.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  6 ～ 13	200	Cast Iron[◎] / Aluminum[◎]	Carbide	250	Straight Shank	N/A	-	Available

  Preço (excluindo IVA) a partir de:

  287.67 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  GUHRING

  Straight Shank Drill Long Total Length 100 mm GT100 J691

  [Features]· Improves chip dischargeability in mirror finishing of grooves, and offers excellent welding resistance in aluminum machining.· Internal lubrication enables high performance deep hole drilling without steps.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 13	50	Cast Iron[◎] / Aluminum[◎]	Carbide	100	Straight Shank	N/A	-	Available

  Preço (excluindo IVA) a partir de:

  106.82 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  GUHRING

  Straight Shank Drill Long Total Length 100 mm GT100 J761

  [Features]· Ideal for deep drilling aluminum, aluminum alloy, cast iron, etc.· Internal lubrication enables high performance deep hole drilling without steps.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 6	60	Cast Iron[◎] / Aluminum[◎]	Carbide	100	Straight Shank	N/A	-	Available

  Preço (excluindo IVA) a partir de:

  175.82 €

  Data de envio regular:

  24 dias úteis

  Configurar
• 

  GUHRING

  Straight Shank Drill Long Total Length 150 mm GT100 J692

  [Features]· Improves chip dischargeability in mirror finishing of grooves, and offers excellent welding resistance in aluminum machining.· Internal lubrication enables high performance deep hole drilling without steps.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 13	100	Cast Iron[◎] / Aluminum[◎]	Carbide	150	Straight Shank	N/A	-	Available

  Preço (excluindo IVA) a partir de:

  124.33 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  GUHRING

  Straight Shank Drill Long Total Length 200 mm GT100 J693

  [Features]· Improves chip dischargeability in mirror finishing of grooves, and offers excellent welding resistance in aluminum machining.· Internal lubrication enables high performance deep hole drilling without steps.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 13	150	Cast Iron[◎] / Aluminum[◎]	Carbide	200	Straight Shank	N/A	-	Available

  Preço (excluindo IVA) a partir de:

  177.41 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  GUHRING

  Straight Shank Drill Long Total Length 200 mm GT100 J763

  [Features]· Ideal for deep drilling aluminum, aluminum alloy, cast iron, etc.· Internal lubrication enables high performance deep hole drilling without steps.

  Ler mais

  Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
  3 ～ 10	120 ～ 140	Cast Iron[◎] / Aluminum[◎]	Carbide	200	Straight Shank	N/A	-	Available

  Preço (excluindo IVA) a partir de:

  292.50 €

  Data de envio regular:

  24 dias úteis

  Configurar