Straight Shank / End Mill Shank Drills (Carbide)（Shank Type：End Mill Shank Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Micro Drill Short Tip
ATOM
A drill for precision multiporous machining. Supports a wide range of applications, from general steel to nonferrous metals and resins.Configure nowStarting from∗ ： 29.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
End Mill Shank Drill 12 X D, with Oil Hole, RT 100 Double Margin 5525
GUHRING
The use of a double margin provides excellent straightness and enables highly accurate deep drilling. Internal lubrication enables high performance drilling without steps.Configure nowStarting from∗ ： 203.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Solid Carbide Drill 2D Type AD-2D
OSG
[Features]
· Carbide 2D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips- Volume Discount
Configure nowStarting from∗ ： 37.21 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Solid Carbide Drill 4D Type AD-4D
OSG
[Features]
· Carbide 4D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips- Volume Discount
Configure nowStarting from∗ ： 43.71 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Solid Carbide Drill 30D Type With Oil Hole ADO-30D
OSG
[Features]
· Carbide 30D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life.
The use of a middle margin improves stability when machining deep holesConfigure nowStarting from∗ ： 156.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TS Coated Carbide Composite Spiral Drill, Stub Model
MISUMI
[Features]
-Designed with a 30° helix angle near the tip and 20° near the shank
-The 20° section has a large core diameter for improved tool durability
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, delivery times, etc.- Volume Discount
Configure nowStarting from∗ ： 96.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)
MISUMI
[Features]
-Providing an edge with smoothing groove on the outer circumference, it is possible to perform hole drilling and hole finishing simultaneously
-Supports a wide range of materials, from general steel to stainless steel
-Internal lubricant supply efficiently removes chips and improves tool life (TAC-HBNESDR)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 61.06 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular
MISUMI
3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow condition- Volume Discount
Configure nowStarting from∗ ： 57.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Double Margin Drill, Regular
MISUMI
[Features]
-Providing 4 edges on the outer circumference of the drill improves guiding performance during chamfering and penetration, enabling very straight and stable drilling
-Supports a wide range of materials, from general steel to stainless steel
-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 78.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub
MISUMI
[Features]
-The wavy cutting edge achieves excellent sharpness and strength and promotes chip evacuation
-The use of triple rake and R-type thinning achieves high centripetal force
-Designed with larger core diameter than TAC-ESDBA to improve durability
-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 47.71 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular
MISUMI
By applying three rake + R thinning, it demonstrates a high level of afferent.- Volume Discount
Configure nowStarting from∗ ： 56.44 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub
MISUMI
[Features]
-Capable of high feed and high speed cutting from general steel to stainless steel
-The adoption of a corrugated cutting edge achieves excellent sharpness and strength and promotes chip evacuation
-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning
-Suppresses chipping through the adoption of a bevel edge treatment on the shoulder
-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance- Volume Discount
Configure nowStarting from∗ ： 42.01 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular
MISUMI
[Features]
-Internal lubrication efficiently evacuates chips and improves tool life
-Capable of high feed and high speed cutting from general steel to stainless steel
-Adopting a corrugated cutting edge achieves excellent sharpness and strength, and promotes chip evacuation
-High-speed cutting is achieved by maintaining excellent strength and stability by adopting tapered shape and R-type thinning
-Suppresses chipping by adopting chamfer treatment on the shoulder
-By adopting diameter plus tolerance, it is effective for high-precision finishing of holes closer to hole tolerance- Volume Discount
Configure nowStarting from∗ ： 111.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Stub
MISUMI
[Features]
-Designed with small core diameter to improve chip evacuation
-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 25.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill, Regular Model with Oil Holes
MISUMI
[Features]
-Internal lubrication efficiently evacuates chips and improves tool life
-Supports a wide range of materials, from general steel to stainless steel
-Achieves excellent strength by adopting a straight cutting edge
-Demonstrates high centripetal force by using three chip and X-type thinning
-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.- Volume Discount
Configure nowStarting from∗ ： 87.11 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub
MISUMI
[Features]
-Weak helix and large core diameter improve tool rigidity
-Achieves excellent strength by using a straight cutting edge
-Cutting edge chipping is suppressed by corner radius machining, and cracks at the bottom of blind holes in workpieces are also suppressed
-Ideal for machining high hardness steel from HRC40 to 60
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties.- Volume Discount
Configure nowStarting from∗ ： 69.75 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular
MISUMI
[Features]
-Weak helix angle and high core diameter improve the rigidity of the tool
-Achieves excellent strength by using a straight cutting edge
-Ideal for machining high hardness steels from HRC40 to 60
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 58.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular
MISUMI
A small radius type of the high-hardness steel series- Volume Discount
Configure nowStarting from∗ ： 43.70 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular
MISUMI
[Features]
-Due to its special shape, it has excellent cutting performance even in non-ferrous metals such as grey cast iron, ductile iron, aluminium alloys, brass and magnesium
-Due to the spiral tip shape of the pointed bit part, drilling without centring is possible
-Wide flute design promotes chip flow.- Volume Discount
Configure nowStarting from∗ ： 72.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Aqua Drill 3-Flute AQD3F
NACHI(FUJIKOSHI)
Adopts three blade with excellent cutting balance. Adopt three blade with excellent cutting balance.Configure nowStarting from∗ ： 116.31 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Aqua Drill EX Oil Hole 5D AQDEXOH5D
NACHI(FUJIKOSHI)
Stable wet machining, can be MQL machining. For high efficiency drilling up to 5 times the drill diameter.Configure nowStarting from∗ ： 120.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Aqua Drill EX Regular AQDEXR
NACHI(FUJIKOSHI)
Super general-use drill capable of stable high efficiency machining in a range from medium low speed to high speed applications.Configure nowStarting from∗ ： 113.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Aqua Drill FC AQDFC
NACHI(FUJIKOSHI)
Ideal for long-life processing of FC, FCD and low carbon steel.Configure nowStarting from∗ ： 111.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Aqua Drill Hard AQDH
NACHI(FUJIKOSHI)
Highly efficient processing of 50-68 HRC tempered steel is possible.Configure nowStarting from∗ ： 35.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Aqua Micro Drill AQMD
NACHI(FUJIKOSHI)
Capable of stable drilling of small diameter holes. Well suited for machining of materials ranging from green timber to high hardness steel.- Volume Discount
Configure nowStarting from∗ ： 39.65 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Aqua Drill EX Stub AQDEXS
NACHI(FUJIKOSHI)
Super general-use drill capable of stable high efficiency machining in a range from medium low speed to high speed applications.- Volume Discount
Configure nowStarting from∗ ： 95.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
DLC Regular Drill DLCDR
NACHI(FUJIKOSHI)
High speed wet processing and dry processing of aluminum alloy is possible.Configure nowStarting from∗ ： 129.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
DLC Micro Drills DLCMD
NACHI(FUJIKOSHI)
High speed wet processing and dry processing of aluminum alloy is possible. Aluminum drill for small diameter hole.Configure nowStarting from∗ ： 59.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Aqua Drill EX Oil Hole 8D AQDEXOH8D
NACHI(FUJIKOSHI)
Stable wet machining, can be MQL machining. For high efficiency drilling up to 8 times the drill diameter.Configure nowStarting from∗ ： 174.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Aqua Drill Stub AQDS
NACHI(FUJIKOSHI)
Well suited for high speed / long life machining of materials ranging from green timber to high hardness steel. Drill capable of dry machining.Configure nowStarting from∗ ： 101.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3 Flute Long Neck Type Carbide for High Hardness Steel FHL-GDTS
OSG
The processing of ultra-deep hole of 10d ~ 20D in hardened steel, which could not be achieved only by electrical discharge machining, is now possible with high accuracy, while significant reduction in the total drilling time is achieved.Configure nowStarting from∗ ： 67.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Stub Type for High Hardness Steel FH-GDS
OSG
Developed For Crafting Small Diameter Holes in Hardened Steel And is Suited For High Precision / Long Life Crafting of Shallow (Approx. 3D) Holes.Configure nowStarting from∗ ： 52.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Medium Type Carbide for High Hardness Steel FH-GDN
OSG
Developed For Crafting Small Diameter Holes in Hardened Steel And Shows its Best Performance When Crafting Deep (Approx. 7D) HolesConfigure nowStarting from∗ ： 57.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Very Small Diameter Drill Leading Drill UVM-LDS
OSG
Collaboration with UVM-DRL enables high precision drillingConfigure nowStarting from∗ ： 153.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
UTDSX UT Micro Coat, Unimax Drill, Short Blade
UNION TOOL
[Features]
· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.
· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials
· The newly designed drill shape and X-thinning provide improved impact fracture resistance and reduced variation when drilling multiple holes
· The tip angle is set to 130° to suppress the burr height in through holes
· A high rigidity short blade is optimal for high precision machining and also for pilot hole processingConfigure nowStarting from∗ ： 19.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TAW WSTAR Insert Drill
MITSUBISHI MATERIALS
Interchangeable head type carbide insert drill.
[Features]
· Supports sharpness and high precision machining equivalent to solid tools, despite being an insert type.
· Wave blade type having excellent chip disposal.
· Serrated shape maintains high precision.
[Applications]
· High efficiency machining of steel, stainless steel, and cast parts.Configure nowStarting from∗ ： 330.13 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
MNS WSTAR Solid Drill for Machining Aluminum Alloy
MITSUBISHI MATERIALS
World's first carbide solid drill with 4 coolant holes for aluminum machining.
[Features]
· Lineup from φ3 (diameter 3 mm) to φ14 (diameter 14 mm) in 0.1 mm increments.
· Standardized L/D = 5, 10, 20 and 30 types to suit various hole depths.
· It is possible to machine hole depths that are 10-30 times the drill diameter in a single go, without stopping.
· Four-hole coolant holes reduce the amount of aluminum welding, and allow high efficiency processing of aluminum alloys.
[Applications]
· High speed, high efficiency processing of aluminum alloy.Configure nowStarting from∗ ： 132.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MZE ZET1 Drill (Externally Lubricated)
MITSUBISHI MATERIALS
General purpose carbide solid drill.
[Features]
· A sharp, tough, straight cutting edge.
[Applications]
· Supports high efficiency and high accuracy machining of a wide range of work materials, from carbon steel to difficult-to-cut materials.- Volume Discount
Configure nowStarting from∗ ： 86.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MSE Miracle MINI STAR DRILL
MITSUBISHI MATERIALS
Ultra-small diameter carbide solid drill.
[Features]
· Tool shape with attention to machining stability (wide margin width and shallow circumferential relief).
· Stable ultra small diameter machining is enabled with large groove width with excellent chip discharge performance.
[Applications]
· Supports drilling small holes starting from φ0.1 (diameter 0.1 mm).- Volume Discount
Configure nowStarting from∗ ： 37.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
VCSSS Miracle Drill (3 mm Shank Series)
MITSUBISHI MATERIALS
Ultra-small diameter carbide solid drill.
[Features]
· Due to a specialized design to provide exceptional drill rigidity, it has very good resistance to breakage and chipping.
[Applications]
· Ideal for small diameter drilling of tempered steel or hardened steel.- Volume Discount
Configure nowStarting from∗ ： 143.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
STAW Small Diameter WSTAR Insert Drill
MITSUBISHI MATERIALS
Interchangeable head type carbide insert drill.
[Features]
· Wave blade type and groove shape having excellent chip disposal.
· It supports various depths: L/D 1.5, 3, 5, 8.
· Robust clamp mechanism that enables the stable drilling of small-diameter holes.
· Head is interchangeable, enabling cost reductions.
[Applications]
· Optimal for machining of a wide array of work materials, including steel, stainless steel, cast parts, etc.Configure nowStarting from∗ ： 281.37 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
DCSSM Drill for Non-Ferrous Metal Machining (M)
MITSUBISHI MATERIALS
Diamond coated drill for non-ferrous metal machining. (Middle type)
[Features]
· The unique CVD diamond coating technology demonstrates incredible film adhesiveness.
· Enables stable drilling that won't easily peel or chip.
[Applications]
· Optimal for machining of high silicon aluminum, graphite, machinable ceramics, etc.
· Long life and high-precision drilling.Configure nowStarting from∗ ： 130.65 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
DCSSS Drill for Non-Ferrous Metal Machining (S)
MITSUBISHI MATERIALS
CVD diamond coated drill for non-ferrous metal machining. (Short)
[Features]
· The unique CVD diamond coating technology demonstrates incredible film adhesiveness.
· Drilling tool that enables stable drilling that won't easily peel or chip.
[Applications]
· Optimal for machining of high silicon aluminum, graphite, machinable ceramics, etc.
· Long life and high-precision drilling.Configure nowStarting from∗ ： 118.83 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
NSPD Micro Point Drill (Pilot Hole Machining)
NS TOOL
The tip is thinned to reduce cutting resistance. Stable Drilling Accuracy (φ0.025 or more)- Volume Discount
Configure nowStarting from∗ ： 50.68 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NSMD-S Micro Drill, Short
NS TOOL
A short type with groove length 6 times the blade diameter, capable of stable machiningConfigure nowStarting from∗ ： 120.31 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Hole diameter (drill diameter) D(mm) |
| Groove Length L(mm) |
| work material |
| Tool Material Type |
| Overall Length L(mm) |
| Shank Type |
| Coating Y/N |
| Coating Type |
| With/without Oil Hole |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ATOM | GUHRING | OSG | OSG | OSG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | UNION TOOL | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | NS TOOL | NS TOOL |
| Product Series | End Mill Shank Drill 12 X D, with Oil Hole, RT 100 Double Margin 5525 | TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes) | TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular | TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub | TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular | TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular | TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular | 3 Flute Long Neck Type Carbide for High Hardness Steel FHL-GDTS | |||||||||||||||||||||||||||||||||||
| Starting from∗ | 29.89 € *Unit price with basic configuration | 203.69 € *Unit price with basic configuration | 37.21 € *Unit price with basic configuration Volume Discount | 43.71 € *Unit price with basic configuration Volume Discount | 156.60 € *Unit price with basic configuration | 96.26 € *Unit price with basic configuration Volume Discount | 61.06 € *Unit price with basic configuration Volume Discount | 57.87 € *Unit price with basic configuration Volume Discount | 78.36 € *Unit price with basic configuration Volume Discount | 47.71 € *Unit price with basic configuration Volume Discount | 56.44 € *Unit price with basic configuration Volume Discount | 42.01 € *Unit price with basic configuration Volume Discount | 111.36 € *Unit price with basic configuration Volume Discount | 25.57 € *Unit price with basic configuration Volume Discount | 87.11 € *Unit price with basic configuration Volume Discount | 69.75 € *Unit price with basic configuration Volume Discount | 58.66 € *Unit price with basic configuration Volume Discount | 43.70 € *Unit price with basic configuration Volume Discount | 72.95 € *Unit price with basic configuration Volume Discount | 116.31 € *Unit price with basic configuration | 120.91 € *Unit price with basic configuration | 113.17 € *Unit price with basic configuration | 111.96 € *Unit price with basic configuration | 35.79 € *Unit price with basic configuration | 39.65 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 95.75 € *Unit price with basic configuration | 129.69 € *Unit price with basic configuration | 59.34 € *Unit price with basic configuration | 174.14 € *Unit price with basic configuration | 101.70 € *Unit price with basic configuration | 67.60 € *Unit price with basic configuration | 52.37 € *Unit price with basic configuration | 57.45 € *Unit price with basic configuration | 153.29 € *Unit price with basic configuration | 19.21 € *Unit price with basic configuration | 330.13 € *Unit price with basic configuration | 132.13 € *Unit price with basic configuration | 86.13 € *Unit price with basic configuration Volume Discount | 37.38 € *Unit price with basic configuration Volume Discount | 143.65 € *Unit price with basic configuration | 281.37 € *Unit price with basic configuration | 130.65 € *Unit price with basic configuration | 118.83 € *Unit price with basic configuration | 50.68 € *Unit price with basic configuration Volume Discount | 120.31 € *Unit price with basic configuration |
| Min. Shipping Days | 6 Days | 8 Days | 5 Days | 5 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 9 Days | 9 Days | 6 Days | 6 Days |
| Hole diameter (drill diameter) D(mm) | 0.1 ～ 3 | 3 ～ 20 | 2 ～ 12 | 2 ～ 20 | 3.5 ～ 10 | 3 ～ 12 | 3 ～ 13 | 2 ～ 13 | 1 ～ 11 | 3 ～ 13 | 3 ～ 13 | 3 ～ 8 | 4.2 ～ 7 | 0.3 ～ 6 | 3 ～ 13 | 3 ～ 13 | 3 ～ 13 | 0.8 ～ 3 | 5 ～ 12 | 4.21 ～ 12.55 | 2.5 ～ 8.7 | 2.9 ～ 10.3 | 2.1 ～ 11.9 | 2 ～ 9.9 | 0.21 ～ 1.7 | 2.1 ～ 12.9 | 5.7 ～ 9.5 | 1.3 | 5.6 ～ 6.8 | 4.2 ～ 12.5 | 1 ～ 2.5 | 0.3 ～ 2 | 0.3 ～ 2 | 0.05 | 0.3 ～ 2 | 18.5-19.4 ～ 29.5-30.4 | 4.3 ～ 5.1 | 1 ～ 1.9 | 0.1 ～ 0.99 | 0.9 ～ 1.6 | 10-10.4 ～ 17.5-18.4 | 2.1 ～ 2.9 | 0.2 ～ 2 | 0.01 ～ 0.1 | 0.01 ～ 0.05 |
| Groove Length L(mm) | 0.6 ～ 12 | 50 ～ 258 | 14 ～ 55 | 20 ～ 101 | 116 ～ 330 | 20 ～ 55 | 20 ～ 71 | 12 ～ 77 | 12 ～ 71 | 20 ～ 60 | 28 ～ 77 | 20 ～ 41 | 24 ～ 53 | 2 ～ 28 | 28 ～ 77 | 20 ～ 60 | 20 ～ 77 | 6 ～ 27 | 44 ～ 71 | 22 ～ 51 | 20 ～ 72 | 19 ～ 66 | 15 ～ 73 | 12 ～ 43 | 2.5 ～ 15 | 10 ～ 49 | 41 ～ 58 | 15 | 66 ～ 77 | 22 ～ 51 | 5 ～ 13 | 1.6 ～ 12 | 2.5 ～ 18 | 0.075 | 1.5 ～ 10 | 68 ～ 250 | 44 ～ 50 | 6 ～ 11 | 1.2 ～ 10 | 6 ～ 10 | 22 ～ 154 | 17 ～ 21 | 2 ～ 12 | 0.015 ～ 0.2 | 0.06 ～ 0.3 |
| work material | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | - | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Quenched and tempered steel[○] / High Hardness Steel[◎] | Quenched and tempered steel[○] / High Hardness Steel[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Cast Iron[◎] | High Hardness Steel[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] | Quenched and tempered steel[○] / High Hardness Steel[◎] | Quenched and tempered steel[○] / High Hardness Steel[◎] | Quenched and tempered steel[○] / High Hardness Steel[◎] | Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○] | General Steel[◎] / Stainless Steel[○] / Cast Iron[◎] | Aluminum[◎] | General Steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] | General Steel[○] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] | Aluminum[○] | Aluminum[○] | Stainless Steel[○] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Overall Length L(mm) | 38 | 90 ～ 310 | 62 ～ 102 | 66 ～ 153 | 185 ～ 390 | 50 ～ 115 | 62 ～ 124 | 46 ～ 124 | 45 ～ 118 | 66 ～ 107 | 66 ～ 124 | 62 ～ 79 | 66 ～ 91 | 38 ～ 66 | 66 ～ 124 | 62 ～ 107 | 62 ～ 124 | 47 ～ 67 | 82 ～ 118 | 66 ～ 110 | 68 ～ 127 | 49 ～ 114 | 47 ～ 130 | 44 ～ 93 | 38 ～ 47 | 45 ～ 100 | 85 ～ 108 | 47 | 118 ～ 130 | 66 ～ 110 | 57 ～ 65 | 38 ～ 46 | 38 ～ 50 | 38 | 38 | 155 ～ 345 | 100 | 55 | 38 | 38 ～ 45 | 80 ～ 224 | 60 | 38 ～ 45 | 40 | 40 |
| Shank Type | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank |
| Coating Y/N | N/A | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | N/A | N/A | N/A | Available | Available | N/A | Available | Available | N/A | N/A |
| Coating Type | Non-Coated | Other | Other | Other | Other | - | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | - | - | - | TiAlN | Other | Other | Other | Other | Other | Other | Other | DLC | DLC | Other | Other | Other | Other | Other | Other | TiCN | Non-Coated | Non-Coated | Non-Coated | TiN | TiAlN | Non-Coated | Dia Coat | Dia Coat | - | - |
| With/without Oil Hole | N/A | Available | N/A | N/A | Available | N/A | Available / N/A | N/A | N/A | N/A | N/A | N/A | Available | N/A | Available | N/A | N/A | N/A | N/A | N/A | Available | N/A | N/A | N/A | N/A | - | N/A | N/A | Available | N/A | N/A | Available | N/A | N/A | N/A | Available | Available | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Hole diameter (drill diameter) D(mm)
-
0～0.995
- 0
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- 0.055
- 0.06
- 0.065
- 0.07
- 0.075
- 0.08
- 0.085
- 0.09
- 0.095
- 0.1
- 0.105
- 0.11
- 0.115
- 0.12
- 0.125
- 0.13
- 0.135
- 0.14
- 0.145
- 0.15
- 0.155
- 0.16
- 0.165
- 0.17
- 0.175
- 0.18
- 0.185
- 0.19
- 0.195
- 0.2
- 0.205
- 0.21
- 0.215
- 0.22
- 0.225
- 0.23
- 0.235
- 0.24
- 0.245
- 0.25
- 0.255
- 0.26
- 0.265
- 0.27
- 0.275
- 0.28
- 0.285
- 0.29
- 0.295
- 0.3
- 0.305
- 0.31
- 0.315
- 0.32
- 0.325
- 0.33
- 0.335
- 0.34
- 0.345
- 0.35
- 0.355
- 0.36
- 0.365
- 0.37
- 0.375
- 0.38
- 0.385
- 0.39
- 0.395
- 0.4
- 0.405
- 0.41
- 0.415
- 0.42
- 0.425
- 0.43
- 0.435
- 0.44
- 0.445
- 0.45
- 0.455
- 0.46
- 0.465
- 0.47
- 0.475
- 0.48
- 0.485
- 0.49
- 0.495
- 0.5
- 0.505
- 0.51
- 0.515
- 0.52
- 0.525
- 0.53
- 0.535
- 0.54
- 0.545
- 0.55
- 0.555
- 0.56
- 0.565
- 0.57
- 0.575
- 0.58
- 0.585
- 0.59
- 0.595
- 0.6
- 0.605
- 0.61
- 0.615
- 0.62
- 0.625
- 0.63
- 0.635
- 0.64
- 0.645
- 0.65
- 0.655
- 0.66
- 0.665
- 0.67
- 0.675
- 0.68
- 0.685
- 0.69
- 0.695
- 0.7
- 0.705
- 0.71
- 0.715
- 0.72
- 0.725
- 0.73
- 0.735
- 0.74
- 0.745
- 0.75
- 0.755
- 0.76
- 0.765
- 0.77
- 0.775
- 0.78
- 0.785
- 0.79
- 0.795
- 0.8
- 0.805
- 0.81
- 0.815
- 0.82
- 0.825
- 0.83
- 0.835
- 0.84
- 0.845
- 0.85
- 0.855
- 0.86
- 0.865
- 0.87
- 0.875
- 0.88
- 0.885
- 0.89
- 0.895
- 0.9
- 0.905
- 0.91
- 0.915
- 0.92
- 0.925
- 0.93
- 0.935
- 0.94
- 0.945
- 0.95
- 0.955
- 0.96
- 0.965
- 0.97
- 0.975
- 0.98
- 0.985
- 0.99
- 0.995
-
1～1.995
- 1
- 1.005
- 1.01
- 1.015
- 1.02
- 1.025
- 1.03
- 1.035
- 1.04
- 1.045
- 1.05
- 1.055
- 1.06
- 1.065
- 1.07
- 1.075
- 1.08
- 1.085
- 1.09
- 1.095
- 1.1
- 1.105
- 1.11
- 1.115
- 1.12
- 1.125
- 1.13
- 1.135
- 1.14
- 1.145
- 1.15
- 1.155
- 1.16
- 1.165
- 1.17
- 1.175
- 1.18
- 1.185
- 1.19
- 1.195
- 1.2
- 1.205
- 1.21
- 1.215
- 1.22
- 1.225
- 1.23
- 1.235
- 1.24
- 1.245
- 1.25
- 1.255
- 1.26
- 1.265
- 1.27
- 1.275
- 1.28
- 1.285
- 1.29
- 1.295
- 1.3
- 1.305
- 1.31
- 1.315
- 1.32
- 1.325
- 1.33
- 1.335
- 1.34
- 1.345
- 1.35
- 1.355
- 1.36
- 1.365
- 1.37
- 1.375
- 1.38
- 1.385
- 1.39
- 1.395
- 1.4
- 1.405
- 1.41
- 1.415
- 1.42
- 1.425
- 1.43
- 1.435
- 1.44
- 1.445
- 1.45
- 1.455
- 1.46
- 1.465
- 1.47
- 1.475
- 1.48
- 1.485
- 1.49
- 1.495
- 1.5
- 1.505
- 1.51
- 1.515
- 1.52
- 1.525
- 1.53
- 1.535
- 1.54
- 1.545
- 1.55
- 1.555
- 1.56
- 1.565
- 1.57
- 1.575
- 1.58
- 1.585
- 1.59
- 1.595
- 1.6
- 1.605
- 1.61
- 1.615
- 1.62
- 1.625
- 1.63
- 1.635
- 1.64
- 1.645
- 1.65
- 1.655
- 1.66
- 1.665
- 1.67
- 1.675
- 1.68
- 1.685
- 1.69
- 1.695
- 1.7
- 1.705
- 1.71
- 1.715
- 1.72
- 1.725
- 1.73
- 1.735
- 1.74
- 1.745
- 1.75
- 1.755
- 1.76
- 1.765
- 1.77
- 1.775
- 1.78
- 1.785
- 1.79
- 1.795
- 1.8
- 1.805
- 1.81
- 1.815
- 1.82
- 1.825
- 1.83
- 1.835
- 1.84
- 1.845
- 1.85
- 1.855
- 1.86
- 1.865
- 1.87
- 1.875
- 1.88
- 1.885
- 1.89
- 1.895
- 1.9
- 1.905
- 1.91
- 1.915
- 1.92
- 1.925
- 1.93
- 1.935
- 1.94
- 1.945
- 1.95
- 1.955
- 1.96
- 1.965
- 1.97
- 1.975
- 1.98
- 1.985
- 1.99
- 1.995
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.864
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.95
- 6
- 6.01
- 6.02
- 6.03
- 6.04
- 6.05
- 6.06
- 6.07
- 6.08
- 6.09
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.35 (¼")
- 6.37
- 6.375
- 6.4
- 6.5
- 6.53
- 6.55
- 6.6
- 6.63
- 6.65
- 6.7
- 6.75
- 6.76
- 6.8
- 6.85
- 6.9
- 6.91
- 6.95
-
7～7.98
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.14
- 7.2
- 7.25
- 7.3
- 7.35
- 7.36
- 7.37
- 7.38
- 7.4
- 7.45
- 7.49
- 7.5
- 7.52
- 7.54
- 7.55
- 7.6
- 7.67
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
-
8～8.9
- 8
- 8.01
- 8.02
- 8.03
- 8.04
- 8.05
- 8.06
- 8.07
- 8.08
- 8.09
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.33
- 8.4
- 8.43
- 8.45
- 8.5
- 8.53
- 8.55
- 8.58
- 8.6
- 8.61
- 8.65
- 8.7
- 8.73
- 8.75
- 8.8
- 8.84
- 8.85
- 8.9
-
9～9.97
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.13
- 9.2
- 9.21
- 9.24
- 9.25
- 9.26
- 9.3
- 9.35
- 9.36
- 9.38
- 9.4
- 9.5
- 9.52
- 9.53
- 9.54
- 9.55
- 9.58
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.92
- 9.95
- 9.97
-
10～10.9
- 10
- 10-10.4
- 10.0-10.4
- 10.01
- 10.02
- 10.03
- 10.04
- 10.05
- 10.06
- 10.07
- 10.08
- 10.09
- 10.1
- 10.2
- 10.25
- 10.26
- 10.3
- 10.32
- 10.4
- 10.45
- 10.49
- 10.5
- 10.5-10.9
- 10.55
- 10.6
- 10.65
- 10.7
- 10.71
- 10.72
- 10.75
- 10.8
- 10.85
- 10.9
-
11～11.95
- 11
- 11.0-11.4
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.14
- 11.2
- 11.22
- 11.24
- 11.3
- 11.36
- 11.38
- 11.4
- 11.5
- 11.5-11.9
- 11.51
- 11.55
- 11.56
- 11.6
- 11.7
- 11.8
- 11.85
- 11.9
- 11.91
- 11.95
-
12～12.96
- 12
- 12.0-12.4
- 12.01
- 12.02
- 12.03
- 12.04
- 12.05
- 12.06
- 12.07
- 12.08
- 12.09
- 12.1
- 12.2
- 12.25
- 12.3
- 12.4
- 12.5
- 12.5-12.9
- 12.55
- 12.6
- 12.7
- 12.75
- 12.8
- 12.9
- 12.96
-
13～13.9
- 13
- 13.0-13.4
- 13.1
- 13.2
- 13.25
- 13.3
- 13.4
- 13.43
- 13.49
- 13.5
- 13.5-13.9
- 13.55
- 13.6
- 13.65
- 13.7
- 13.75
- 13.8
- 13.89
- 13.9
-
14～14.96
- 14
- 14.0-14.4
- 14.1
- 14.2
- 14.25
- 14.29
- 14.3
- 14.4
- 14.5
- 14.5-14.9
- 14.55
- 14.6
- 14.68
- 14.69
- 14.7
- 14.75
- 14.8
- 14.9
- 14.96
-
15～15.9
- 15
- 15.0-15.4
- 15.08
- 15.1
- 15.2
- 15.25
- 15.3
- 15.4
- 15.48
- 15.5
- 15.5-16.4
- 15.55
- 15.6
- 15.7
- 15.8
- 15.87
- 15.88
- 15.9
-
16～16.9
- 16
- 16.08
- 16.1
- 16.2
- 16.27
- 16.3
- 16.4
- 16.5
- 16.5-17.4
- 16.55
- 16.6
- 16.67
- 16.7
- 16.75
- 16.8
- 16.9
-
17～17.9
- 17
- 17.07
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.5-18.4
- 17.55
- 17.6
- 17.7
- 17.8
- 17.86
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.26
- 18.3
- 18.35
- 18.4
- 18.5
- 18.5-19.4
- 18.6
- 18.65
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.25
- 19.3
- 19.4
- 19.5
- 19.5-20.4
- 19.55
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.5-21.4
- 20
- 20.5
- 20.5-21.4
-
21～21.5-22.4
- 21
- 21.5
- 21.5-22.4
-
22～22.5-23.4
- 22
- 22.5
- 22.5-23.4
-
23～23.5-24.4
- 23
- 23.5
- 23.5-24.4
-
24～24.5-25.4
- 24
- 24.5
- 24.5-25.4
-
25～25.5-26.4
- 25
- 25.5
- 25.5-26.4
-
26～26.5-27.4
- 26
- 26.5
- 26.5-27.4
-
27～27.5-28.4
- 27
- 27.5
- 27.5-28.4
-
28～28.5-29.4
- 28
- 28.5
- 28.5-29.4
-
29～29.5-30.4
- 29
- 29.5
- 29.5-30.4
-
30～30 ～ 32
- 30
- 30 ～ 32
-
31
-
32
-
33
-
34
-
35
-
36
-
37～37 ～ 40
- 37
- 37 ～ 40
-
38
-
39
-
40～40 ～ 45
- 40
- 40 ～ 45
-
41
-
42
-
43
-
44
-
45～45 ～ 50
- 45
- 45 ～ 50
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
58
-
59
-
60～60 ～ 65
- 60
- 60 ～ 65
-
65
-
70
-
75
-
80
-
85
-
90
-
95
-
100
-
110
-
-
Groove Length L(mm)
-
0～0.9
- 0
- 0.015
- 0.025
- 0.04
- 0.05
- 0.06
- 0.075
- 0.08
- 0.09
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.18
- 0.2
- 0.22
- 0.24
- 0.25
- 0.3
- 0.33
- 0.4
- 0.44
- 0.48
- 0.5
- 0.55
- 0.6
- 0.7
- 0.8
- 0.88
- 0.9
-
1～1.98
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.9
- 1.98
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.7
- 5.8
-
6～6.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
-
7～7.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.8
-
9～9.8
- 9
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.8
-
10～10.8
- 10
- 10..1
- 10.2
- 10.4
- 10.5
- 10.6
- 10.8
-
11～11.8
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.6
- 11.7
- 11.8
-
12～12.8
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
-
13～13.8
- 13
- 13.1
- 13.2
- 13.4
- 13.5
- 13.8
-
14～14.9
- 14
- 14.3
- 14.4
- 14.5
- 14.8
- 14.9
-
15～15.8
- 15
- 15.3
- 15.6
- 15.8
-
16～16.8
- 16
- 16.1
- 16.2
- 16.5
- 16.7
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.6
- 17.8
-
18～18.9
- 18
- 18.5
- 18.6
- 18.8
- 18.9
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.7
- 19.8
-
20～20.7
- 20
- 20.3
- 20.4
- 20.7
-
21～21.8
- 21
- 21.2
- 21.4
- 21.6
- 21.8
-
22～22.8
- 22
- 22.1
- 22.2
- 22.5
- 22.8
-
23～23.9
- 23
- 23.3
- 23.4
- 23.9
-
24～24.8
- 24
- 24.3
- 24.5
- 24.6
- 24.8
-
25～25.8
- 25
- 25.2
- 25.5
- 25.7
- 25.8
-
26～26.6
- 26
- 26.1
- 26.3
- 26.4
- 26.6
-
27～27.8
- 27
- 27.5
- 27.6
- 27.8
-
28～28.8
- 28
- 28.1
- 28.2
- 28.5
- 28.8
-
29～29.4
- 29
- 29.3
- 29.4
-
30～30.8
- 30
- 30.6
- 30.8
-
31～31.7
- 31
- 31.2
- 31.5
- 31.7
-
32～32.5
- 32
- 32.3
- 32.4
- 32.5
-
33～33.8
- 33
- 33.6
- 33.8
-
34～34.8
- 34
- 34.1
- 34.4
- 34.5
- 34.8
-
35～35.5
- 35
- 35.3
- 35.5
-
36～36.8
- 36
- 36.5
- 36.8
-
37～37.5
- 37
- 37.5
-
38～38.3
- 38
- 38.3
-
39～39.8
- 39
- 39.8
-
40～40.5
- 40
- 40.5
-
41～41.3
- 41
- 41.3
-
42～42.8
- 42
- 42.5
- 42.8
-
43～43.5
- 43
- 43.5
-
44～44.3
- 44
- 44.3
-
45
-
46
-
47～47.5
- 47
- 47.5
-
48
-
49
-
50
-
51
-
52～52.5
- 52
- 52.5
-
53
-
54
-
55
-
56
-
57～57.5
- 57
- 57.5
-
58
-
59
-
60
-
61
-
62～62.5
- 62
- 62.5
-
63
-
64
-
65
-
66
-
67～67.5
- 67
- 67.5
-
68
-
69
-
70
-
71
-
72～72.5
- 72
- 72.5
-
73
-
74
-
75
-
76
-
77～77.5
- 77
- 77.5
-
78
-
79～79.3
- 79
- 79.3
-
80
-
81
-
82～82.5
- 82
- 82.3
- 82.5
-
83
-
84
-
85
-
86～86.3
- 86
- 86.3
-
87～87.5
- 87
- 87.5
-
88～88.6
- 88
- 88.6
-
89
-
90
-
91
-
92～92.5
- 92
- 92.5
-
93
-
94
-
95
-
96
-
97～97.2
- 97
- 97.2
-
98
-
99
-
100～100.2
- 100
- 100.2
-
101
-
102
-
103
-
104～104.2
- 104
- 104.2
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124～124.3
- 124
- 124.3
-
125
-
126
-
127
-
128
-
129.3
-
130
-
131
-
132
-
133
-
135～135.3
- 135
- 135.3
-
136
-
137
-
138
-
140～140.6
- 140
- 140.6
-
141
-
143
-
144
-
145
-
146
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157.2
-
159
-
160
-
161
-
162～162.2
- 162
- 162.2
-
163
-
165
-
166
-
167～167.2
- 167
- 167.2
-
168
-
170
-
171
-
173
-
174
-
175
-
176
-
177
-
178
-
180
-
182
-
183
-
184
-
185
-
186
-
188
-
189
-
190
-
192
-
194
-
195
-
196
-
197
-
198
-
200
-
202
-
205
-
207
-
208
-
210
-
212
-
214
-
215
-
216
-
218
-
219
-
220
-
223
-
224
-
225
-
226
-
227
-
230
-
231
-
232
-
234
-
238
-
240
-
242
-
243
-
248
-
250
-
252
-
253
-
258
-
260
-
263
-
264
-
265
-
266
-
270
-
272
-
274
-
276
-
277
-
280
-
281
-
282
-
288
-
292
-
294
-
295
-
297
-
300
-
302
-
308
-
310
-
311
-
314
-
315
-
318
-
322
-
323
-
327
-
330
-
336
-
337
-
340
-
343
-
350
-
360
-
372
-
385
-
400
-
402
-
432
-
440
-
460
-
512
-
550
-
692
-
860
-
1030
-
-
work material
-
Tool Material Type
-
Overall Length L(mm)
-
Shank Type
-
Coating Y/N
- Available
- N/A
-
Coating Type
-
With/without Oil Hole
Brand
-
- OSG (30)
- NACHI(FUJIKOSHI) (18)
- MITSUBISHI MATERIALS (16)
- ATOM (14)
- IWATA TOOL (11)
- GUHRING (10)
- NS TOOL (10)
- DIJET (9)
- 7 LEADERS (4)
- KYOWA SEIKO (4)
- UNION TOOL (4)
- OKAZAKI SEIKO (3)
- OMIKOGYO (2)
- ASAHI TOOLS (1)
- FUKUDA (1)
- RYOKO SEIKI (1)
- SANDVIK (1)
- WIDIA (1)
- MAKITA (0)
- TUNGALOY (0)
- ALPEN (0)
- EIKOSHA (0)
- METABO (0)
- DIXI (0)
- WIDIN (0)
- TOYO DRILL (0)
CAD data type
-
- 2D
- 3D
Categories related to Straight Shank / End Mill Shank Drills (Carbide)
Método de pagamento
Pagamento por conta
Pré-pagamento
Fabrico a pedido
Certificados
Copyright © MISUMI Corporation Todos os direitos reservados.