Registar

Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Condições de filtragem

Limpar tudo

  • Estoque
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • work material
  • Tool Material Type
  • Shank Type
  • Coating Y/N
    • Sweep Cut Drill Reamer Type 3 mm Shank

        ATOM

        Sweep Cut Drill Reamer Type 3 mm Shank

        Sweep Cut Drills drastically reduce the burrs produced with through-holes. [Features] · Suppresses hole bending. · Suppresses runout of the drill bit when biting in, realizing high hole position and hole diameter accuracy.
        Ler mais
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        0.1 ~ 31.2 ~ 25Aluminum[◎]Carbide38 ~ 50End Mill ShankN/ANon-CoatedN/A
        Preço (excluindo IVA) a partir de:
        67.02 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Carbide Burnishing Drill, Straight Model

          MISUMI

          Carbide Burnishing Drill, Straight Model

          [Features] -Enables high-precision drilling of aluminium without pre-drilling-Tip diameter can be specified in units of 0.01mm and flute length in units of 0.1mm.
          Ler mais
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          00Aluminum[◎]Carbide40 ~ 60End Mill ShankN/A-N/A
          Data de envio regular:
          8 dias úteis
          Configurar
        • Micro Drill Reamer, Type-N 701

            GUHRING

            Micro Drill Reamer, Type-N 701

            [Features]· Blade diameter tolerance is +0, -0.004, suitable for high precision small diameter hole drilling.
            Ler mais
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            0.25 ~ 1.41.9 ~ 9.5Aluminum[◎]Carbide25-N/A-N/A
            Preço (excluindo IVA) a partir de:
            43.62 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • Solid Center Drill S-CDR

              DIJET

              Solid Center Drill S-CDR

              Since it is made of carbide, it has high hardness and elasticity and can be used for machining steel, cast iron and aluminium.
              Ler mais
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              1 ~ 61 ~ 6Aluminum[○]Carbide45 ~ 90Taper shankN/ANon-CoatedN/A
              Preço (excluindo IVA) a partir de:
              85.28 €
              Data de envio regular:
              8 dias úteis
              Configurar
            • TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular
              • Volume Discount

              MISUMI

              TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular

              [Features] -Due to its special shape, it has excellent cutting performance even in non-ferrous metals such as grey cast iron, ductile iron, aluminium alloys, brass and magnesium-Due to the spiral tip shape of the pointed bit part, drilling without centring is possible-Wide flute design promotes chip flow.
              Ler mais
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              5 ~ 1244 ~ 71Aluminum[○]Carbide82 ~ 118End Mill ShankAvailableTiAlNN/A
              Preço (excluindo IVA) a partir de:
              70.12 €
              Data de envio regular:
              5 dias úteis
              Configurar
            • TiAlN Coated Carbide Stepped Drill, For Bolt Drilling / For Drilling Pilot Holes for Screws, with Chamfering Blade
              • Volume Discount

              MISUMI

              TiAlN Coated Carbide Stepped Drill, For Bolt Drilling / For Drilling Pilot Holes for Screws, with Chamfering Blade

              (DLC-SC-SDR)-Drilling and countersinking holes for screws can be done in one operation, resulting in highly efficient machining (countersink type)-Since relief holes can be drilled at the same time as drilling pilot holes for power strips, it is ideal for drilling pilot holes in thick panels that require relief (single-cut type).
              Ler mais
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              3.4 ~ 10.321 ~ 72Aluminum[○]Carbide73 ~ 136Straight ShankAvailableTiAlNN/A
              Preço (excluindo IVA) a partir de:
              81.59 €
              Data de envio regular:
              5 dias úteis
              Configurar
            • Carbide Drill for Aluminium Machining

                MISUMI

                Carbide Drill for Aluminium Machining

                Frequently used standard sizes are offered at affordable prices
                Ler mais
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                1 ~ 10.56 ~ 43Aluminum[◎]Carbide26 ~ 89Straight ShankN/A-N/A
                Preço (excluindo IVA) a partir de:
                12.45 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • Carbide Step Drill Bit, With Custom Dimensions / Long Shank Type

                  MISUMI

                  Carbide Step Drill Bit, With Custom Dimensions / Long Shank Type

                  [Features]・Introducing a long shank type with custom pilot diameter / large diameter dimensions to the lineup of customizable step drill bits with helical flutes.
                  Ler mais
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  --Aluminum[○]Carbide-End Mill ShankN/A-N/A
                  Data de envio regular:
                  9 dias úteis
                  Configurar
                • Carbide Stub Type for Small Diameter / Precision Machining WX-MS-GDS
                  • DESCONTO
                  • Volume Discount

                  OSG

                  Carbide Stub Type for Small Diameter / Precision Machining WX-MS-GDS

                  Achieves high accuracy and high efficiency very small diameter drilling of precision mechanical components, iInformation and communication components, etc.
                  Ler mais
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  0.19 ~ 51.2 ~ 26Aluminum[◎]Carbide38 ~ 64End Mill Shank / Straight ShankAvailableOtherN/A
                  Preço (excluindo IVA) a partir de:
                  31.40 €
                  Preço especial
                  Data de envio regular:
                  Item em stock: 1 dia útil
                  Alguns artigos podem ser enviados no próprio dia
                  Configurar
                • C-UMD Iron and Steel Drill, Unimax Drill
                  • Volume Discount

                  UNION TOOL

                  C-UMD Iron and Steel Drill, Unimax Drill

                  [Features] -UT micro-coating.Tip angle 150-Tool material: carbide.
                  Ler mais
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  0.11 ~ 2.851.2 ~ 12Aluminum[◎]Carbide38End Mill ShankAvailableOtherN/A
                  Preço (excluindo IVA) a partir de:
                  20.19 €
                  Data de envio regular:
                  6 dias úteis
                  Configurar
                • Micro Drill Standard Tip Length
                  • DESCONTO
                  • Volume Discount

                  ATOM

                  Micro Drill Standard Tip Length

                  A drill for precision multiporous machining. (Min. diameter φ0.02), Can be used for a wide range of applications including general steel, non-ferrous metals, and resins.
                  Ler mais
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  0.02 ~ 30.2 ~ 25Aluminum[◎]Carbide38 ~ 50End Mill ShankN/ANon-CoatedN/A
                  Preço (excluindo IVA) a partir de:
                  28.41 €
                  Preço especial
                  Data de envio regular:
                  Item em stock: 1 dia útil
                  Alguns artigos podem ser enviados no próprio dia
                  Configurar
                • Solid Carbide Drill 3D Type With Oil Hole ADO-3D
                  • Volume Discount

                  OSG

                  Solid Carbide Drill 3D Type With Oil Hole ADO-3D

                  [Features]· Carbide 3D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
                  Ler mais
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  2 ~ 2012 ~ 100Aluminum[○]Carbide66 ~ 165End Mill ShankAvailableOtherAvailable
                  Preço (excluindo IVA) a partir de:
                  65.10 €
                  Data de envio regular:
                  6 dias úteis
                  Configurar
                • SANDVIK CoroDrill 460 Solid Carbide Drill

                    SANDVIK

                    SANDVIK CoroDrill 460 Solid Carbide Drill

                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    3 ~ 20-Aluminum[○]-62 ~ 268.986----
                    Preço (excluindo IVA) a partir de:
                    41.91 €
                    Data de envio regular:
                    5 dias úteis
                    Configurar
                  • Carbide Drill, Straight Shank / Regular
                    • Volume Discount

                    MISUMI

                    Carbide Drill, Straight Shank / Regular

                    [Features] -Multi-faceted uncoated carbide drill bit for a variety of applications-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
                    Ler mais
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    1 ~ 7.512 ~ 69Aluminum[○]Carbide34 ~ 109Straight ShankN/A-N/A
                    Preço (excluindo IVA) a partir de:
                    12.59 €
                    Data de envio regular:
                    5 dias úteis
                    Configurar
                  • Carbide Burnishing Drill, Stepped Model

                      MISUMI

                      Carbide Burnishing Drill, Stepped Model

                      [Features] -No complicated estimations required. It is possible to order the part number of the step drill without drawings.
                      Ler mais
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      --Aluminum[◎]Carbide40 ~ 60End Mill ShankN/A-N/A
                      Data de envio regular:
                      8 dias úteis
                      Configurar
                    • UTDLX UT Micro Coat, Unimax Drill, Long Blade

                        UNION TOOL

                        UTDLX UT Micro Coat, Unimax Drill, Long Blade

                        [Features]· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials· The newly designed drill shape and X-thinning provide improved impact fracture resistance (durability performance) and reduced variation when drilling multiple holes· The tip angle is set to 130° to suppress the burr height in through holes· Groove length 15 times larger than the diameter enables highly precise drilling of deep holes.
                        Ler mais
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        0.3 ~ 34.5 ~ 45Aluminum[◎]Carbide38 ~ 80End Mill ShankAvailableOtherN/A
                        Preço (excluindo IVA) a partir de:
                        35.95 €
                        Data de envio regular:
                        6 dias úteis
                        Configurar
                      • Micro Drill "NEO PRO" Long Blades
                        • DESCONTO
                        • Volume Discount

                        ATOM

                        Micro Drill "NEO PRO" Long Blades

                        A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
                        Ler mais
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        0.03 ~ 30.6 ~ 40Aluminum[○]Carbide38 ~ 65End Mill ShankAvailableFor General Steels (AlCrN, etc.)N/A
                        Preço (excluindo IVA) a partir de:
                        46.50 €
                        Preço especial
                        Data de envio regular:
                        Item em stock: 1 dia útil
                        Alguns artigos podem ser enviados no próprio dia
                        Configurar
                      • Micro Drill, 7 X D, Type-N 6401

                          GUHRING

                          Micro Drill, 7 X D, Type-N 6401

                          Improves chip disposal by increasing groove width, allowing stable small diameter hole milling.
                          Ler mais
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          0.8 ~ 36.4 ~ 27Aluminum[○]Carbide47 ~ 67-AvailableOtherN/A
                          Preço (excluindo IVA) a partir de:
                          102.28 €
                          Data de envio regular:
                          6 dias úteis
                          Configurar
                        • Solid Carbide Drill 5D Type with Oil Hole ADO-5D
                          • Volume Discount

                          OSG

                          Solid Carbide Drill 5D Type with Oil Hole ADO-5D

                          [Features]· Carbide 5D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
                          Ler mais
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          2 ~ 2018 ~ 160Aluminum[○]Carbide70 ~ 225End Mill ShankAvailableOtherAvailable
                          Preço (excluindo IVA) a partir de:
                          85.18 €
                          Data de envio regular:
                          6 dias úteis
                          Configurar
                        • Solid Carbide Drill 5D Type With Oil Hole ADO-SUS-5D
                          • Volume Discount

                          OSG

                          Solid Carbide Drill 5D Type With Oil Hole ADO-SUS-5D

                          [Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 5D type with oil hole
                          Ler mais
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          2 ~ 2018 ~ 140Aluminum[○]Carbide70 ~ 205End Mill Shank / Straight ShankAvailableOtherAvailable
                          Preço (excluindo IVA) a partir de:
                          85.18 €
                          Data de envio regular:
                          6 dias úteis
                          Configurar
                        • SANDVIK CoroDrill 863 Solid Carbide Drill

                            SANDVIK

                            SANDVIK CoroDrill 863 Solid Carbide Drill

                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            4.83 ~ 11.14-Aluminum[○]-58 ~ 152.4----
                            Preço (excluindo IVA) a partir de:
                            260.15 €
                            Data de envio regular:
                            5 dias úteis
                            Configurar
                          • TiAlN Coated Carbide Drill, Stub
                            • Volume Discount

                            MISUMI

                            TiAlN Coated Carbide Drill, Stub

                            [Features] -Designed with small core diameter to improve chip evacuation-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                            Ler mais
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.3 ~ 62 ~ 28Aluminum[◎]Carbide38 ~ 66End Mill ShankAvailableTiAlNN/A
                            Preço (excluindo IVA) a partir de:
                            23.28 €
                            Data de envio regular:
                            5 dias úteis
                            Configurar
                          • TiAlN Coated Carbide Drill, Regular Model with Oil Holes
                            • Volume Discount

                            MISUMI

                            TiAlN Coated Carbide Drill, Regular Model with Oil Holes

                            [Features] -Internal lubrication efficiently evacuates chips and improves tool life-Supports a wide range of materials, from general steel to stainless steel-Achieves excellent strength by adopting a straight cutting edge-Demonstrates high centripetal force by using three chip and X-type thinning-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.
                            Ler mais
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            3 ~ 1328 ~ 77Aluminum[◎]Carbide66 ~ 124End Mill ShankAvailableTiAlNAvailable
                            Preço (excluindo IVA) a partir de:
                            79.21 €
                            Data de envio regular:
                            5 dias úteis
                            Configurar
                          • TiAlN Coated Carbide Drill, Straight Shank / Stub Model
                            • Volume Discount

                            MISUMI

                            TiAlN Coated Carbide Drill, Straight Shank / Stub Model

                            [Features] -Multi-faceted carbide drill for a wide range of applications-TiAlN coating enables high-speed cutting-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the drill, its performance, pricing, etc.
                            Ler mais
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            1 ~ 86 ~ 37Aluminum[○]Carbide26 ~ 79Straight ShankAvailableTiAlNN/A
                            Preço (excluindo IVA) a partir de:
                            20.63 €
                            Data de envio regular:
                            5 dias úteis
                            Configurar
                          • Carbide Drill, Straight Shank / Stub
                            • Volume Discount

                            MISUMI

                            Carbide Drill, Straight Shank / Stub

                            [Features] -Multi-faceted uncoated carbide drill bit for a wide range of applications-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
                            Ler mais
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.5 ~ 83 ~ 37Aluminum[○]Carbide20 ~ 79Straight ShankN/A-N/A
                            Preço (excluindo IVA) a partir de:
                            11.04 €
                            Data de envio regular:
                            5 dias úteis
                            Configurar
                          • Carbide Stepped Drill, for Drilling Pilot Holes for Screws, with Chamfering Blade, Size Designation Model

                              MISUMI

                              Carbide Stepped Drill, for Drilling Pilot Holes for Screws, with Chamfering Blade, Size Designation Model

                              [Features] -No complicated estimates required. It is possible to order the part number of the step drill without drawings.
                              Ler mais
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              --Aluminum[○]Carbide-Straight ShankN/A-N/A
                              Data de envio regular:
                              12 dias úteis
                              Configurar
                            • DLC Coated Carbide Stepped Drill for Aluminium Machining, Stub
                              • Volume Discount

                              MISUMI

                              DLC Coated Carbide Stepped Drill for Aluminium Machining, Stub

                              [Features]-Excellent chip evacuation and sharpness due to high spiral shape-Designed for frequent pre-drilling of M4 to M12 metric coarse holes-2 types of step angles are available for chamfering and cutting-Reduces chamfering process and achieves high drilling efficiency. (DLC-SC-SDR)-Relief holes can be machined simultaneously when drilling pilot holes for bolts (DLC-SF-SDR).
                              Ler mais
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              6.8 ~ 10.348 ~ 72Aluminum[◎]Carbide104 ~ 136Straight ShankAvailableDLCN/A
                              Preço (excluindo IVA) a partir de:
                              97.95 €
                              Data de envio regular:
                              5 dias úteis
                              Configurar
                            • Carbide Burnishing Drill Bit, Long Shank Type

                                MISUMI

                                Carbide Burnishing Drill Bit, Long Shank Type

                                [Features]・Ideal for step drilling aluminum.・Long shank types are now available.
                                Ler mais
                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                --Aluminum[○]Carbide-End Mill ShankN/A-N/A
                                Data de envio regular:
                                8 dias úteis
                                Configurar
                              • Aqua Drill EX Flat AQDEXZ

                                  NACHI(FUJIKOSHI)

                                  Aqua Drill EX Flat AQDEXZ

                                  Countersinking drill with good drilling performance. Well suited for slanted surfaces and pilot drilling for tapping.
                                  Ler mais
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  0.5 ~ 15.81.65 ~ 72Aluminum[○]Carbide47 ~ 115End Mill Shank / Straight ShankAvailableOtherN/A
                                  Preço (excluindo IVA) a partir de:
                                  84.64 €
                                  Data de envio regular:
                                  5 dias úteis
                                  Configurar
                                • DLC Micro Drills DLCMD

                                    NACHI(FUJIKOSHI)

                                    DLC Micro Drills DLCMD

                                    High speed wet processing and dry processing of aluminum alloy is possible. Aluminum drill for small diameter hole.
                                    Ler mais
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    1.315Aluminum[◎]Carbide47End Mill ShankAvailableDLCN/A
                                    Preço (excluindo IVA) a partir de:
                                    57.05 €
                                    Data de envio regular:
                                    10 dias úteis
                                    Configurar
                                  • Medium Type Carbide for Machining Non-Ferrous Metals NF-GDN
                                    • Volume Discount

                                    OSG

                                    Medium Type Carbide for Machining Non-Ferrous Metals NF-GDN

                                    Achieves High Cost Performance in High Speed Hole Drilling of Cast Aluminum, Die Cast Aluminum, Malleable Aluminum etc. Used Extensively in Automobile / Airplane Manufacturing
                                    Ler mais
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    3 ~ 1325 ~ 76Aluminum[◎]Carbide59 ~ 128End Mill Shank / Straight ShankN/ANon-CoatedN/A
                                    Preço (excluindo IVA) a partir de:
                                    18.82 €
                                    Data de envio regular:
                                    6 dias úteis
                                    Configurar
                                  • NSPD Micro Point Drill (Pilot Hole Machining)
                                    • Volume Discount

                                    NS TOOL

                                    NSPD Micro Point Drill (Pilot Hole Machining)

                                    The tip is thinned to reduce cutting resistance. Stable Drilling Accuracy (φ0.025 or more)
                                    Ler mais
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    0.01 ~ 0.10.015 ~ 0.2Aluminum[◎]Carbide40End Mill ShankN/A-N/A
                                    Preço (excluindo IVA) a partir de:
                                    48.72 €
                                    Data de envio regular:
                                    6 dias úteis
                                    Configurar
                                  • DIXI1130 Cemented Carbide Drill (Stub Size)

                                      DIXI

                                      DIXI1130 Cemented Carbide Drill (Stub Size)

                                      A Swiss-made stub-sized drill. It provides excellent polish on grooves and surfaces, removes cutting chips well and provides excellent hole finish.
                                      Ler mais
                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                      0.4 ~ 36 ~ 12Aluminum[○]Carbide30 ~ 46Straight ShankN/A-N/A
                                      Preço (excluindo IVA) a partir de:
                                      22.58 €
                                      Data de envio regular:
                                      6 dias úteis
                                      Configurar
                                    • Carbide Edged Tip Taper Shank Drill

                                        FUKUDA

                                        Carbide Edged Tip Taper Shank Drill

                                        Economical soldering type. The drill helps maintain high economic efficiency as it is appropriate for cast iron and non-ferrous metals, and taking into account the characteristics of carbide alloy and selection of regrinding frequencies.
                                        Ler mais
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        6 ~ 6030 ~ 222Aluminum[○]-110 ~ 412Taper shankN/A-N/A
                                        Preço (excluindo IVA) a partir de:
                                        140.19 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar
                                      • Standard Solid Drill with Coating
                                        • DESCONTO
                                        • Volume Discount

                                        ATOM

                                        Standard Solid Drill with Coating

                                        ADS standard type with a TiAlN coating achieves a long life and consistent machining. It is also possible to drill hardened steel of up to 50 HRC, for which machining was difficult with standard non-coated products.
                                        Ler mais
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        0.3 ~ 64 ~ 40Aluminum[◎]Carbide30 ~ 80Straight ShankAvailableTiAlNN/A
                                        Preço (excluindo IVA) a partir de:
                                        22.38 €
                                        Preço especial
                                        Data de envio regular:
                                        Item em stock: 1 dia útil
                                        Alguns artigos podem ser enviados no próprio dia
                                        Configurar
                                      • Sweep Cut Drill Straight Shank

                                          ATOM

                                          Sweep Cut Drill Straight Shank

                                          Drastically reduces the burrs of through holes. Achieves high hole position and hole diameter precision by suppressing bit runout and deflection when biting. Suppresses hole bending.
                                          Ler mais
                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                          1 ~ 616 ~ 50Aluminum[◎]Carbide50 ~ 102End Mill ShankN/ANon-CoatedN/A
                                          Preço (excluindo IVA) a partir de:
                                          47.90 €
                                          Data de envio regular:
                                          6 dias úteis
                                          Configurar
                                        • Super Long Drill
                                          • Volume Discount

                                          ATOM

                                          Super Long Drill

                                          ADS standard straight shank drill extra-long type.
                                          Ler mais
                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                          0.3 ~ 1315 ~ 120Aluminum[◎]Carbide75 ~ 250Straight ShankN/ANon-CoatedN/A
                                          Preço (excluindo IVA) a partir de:
                                          29.54 €
                                          Data de envio regular:
                                          6 dias úteis
                                          Configurar
                                        • Hi-Spec Micro Drill
                                          • DESCONTO
                                          • Volume Discount

                                          ATOM

                                          Hi-Spec Micro Drill

                                          The intermediate size of the drill diameter 0.01 mm increment size is standardized. High-spec and high-precision drill, keeping runout accuracy and lip height difference that affect hole accuracy within 2 microns.
                                          Ler mais
                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                          0.035 ~ 1.9950.4 ~ 22Aluminum[◎]Carbide38 ~ 50End Mill ShankN/ANon-CoatedN/A
                                          Preço (excluindo IVA) a partir de:
                                          40.91 €
                                          Preço especial
                                          Data de envio regular:
                                          Item em stock: 1 dia útil
                                          Alguns artigos podem ser enviados no próprio dia
                                          Configurar
                                        • Long Drill
                                          • Volume Discount

                                          ATOM

                                          Long Drill

                                          ADS standard straight shank drill long type.
                                          Ler mais
                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                          0.3 ~ 1310 ~ 90Aluminum[◎]Carbide60 ~ 200Straight ShankN/ANon-CoatedN/A
                                          Preço (excluindo IVA) a partir de:
                                          26.55 €
                                          Data de envio regular:
                                          6 dias úteis
                                          Configurar
                                        • Standard Solid Drill
                                          • DESCONTO
                                          • Volume Discount

                                          ATOM

                                          Standard Solid Drill

                                          A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.
                                          Ler mais
                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                          0.3 ~ 134 ~ 50Aluminum[◎]Carbide30 ~ 100Straight ShankN/ANon-CoatedN/A
                                          Preço (excluindo IVA) a partir de:
                                          16.75 €
                                          Preço especial
                                          Data de envio regular:
                                          Item em stock: 1 dia útil
                                          Alguns artigos podem ser enviados no próprio dia
                                          Configurar
                                        • Micro Drill, 8 X D, Type-N 6408

                                            GUHRING

                                            Micro Drill, 8 X D, Type-N 6408

                                            Improves chip disposal by increasing groove width, allowing stable small diameter deep hole milling. Equipped with cooling ducts for internal lubrication, ideal for deep hole machining
                                            Ler mais
                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                            1.4 ~ 315 ~ 33Aluminum[○]Carbide52 ~ 66-AvailableOtherAvailable
                                            Preço (excluindo IVA) a partir de:
                                            152.28 €
                                            Data de envio regular:
                                            6 dias úteis
                                            Configurar
                                          • Micro Drill, Type-N 3899
                                            • Volume Discount

                                            GUHRING

                                            Micro Drill, Type-N 3899

                                            Achieves high-precision and long-life small diameter hole machining by adoption of base material with high breaking resistance and specialized coating ideal for small-diameter drills. The shank diameters are unified at φ3. Lineup featuring sizes in 1/100 increments.
                                            Ler mais
                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                            0.1 ~ 31.2 ~ 12Aluminum[○]Carbide38-AvailableTiAlNN/A
                                            Preço (excluindo IVA) a partir de:
                                            54.95 €
                                            Data de envio regular:
                                            6 dias úteis
                                            Configurar
                                          • Top Solid Tapered Shank Twist Drill DTD

                                              DIJET

                                              Top Solid Tapered Shank Twist Drill DTD

                                              [Features]· It is a tool with excellent abrasion resistance.
                                              Ler mais
                                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                              6 ~ 3068 ~ 188Aluminum[○]Carbide148 ~ 305Taper shankN/ANon-CoatedN/A
                                              Preço (excluindo IVA) a partir de:
                                              202.21 €
                                              Data de envio regular:
                                              8 dias úteis
                                              Configurar
                                            • Carbide Flat Drill ADFLS-2D
                                              • Volume Discount

                                              OSG

                                              Carbide Flat Drill ADFLS-2D

                                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                              3 ~ 2015 ~ 88Aluminum[○]Carbide100 ~ 250End Mill Shank / Straight ShankAvailableOtherN/A
                                              Preço (excluindo IVA) a partir de:
                                              89.70 €
                                              Data de envio regular:
                                              6 dias úteis
                                              Configurar
                                            • Solid Carbide Pilot Drill With Oil Hole For Extra-Long Drills ADO-PLT

                                                OSG

                                                Solid Carbide Pilot Drill With Oil Hole For Extra-Long Drills ADO-PLT

                                                [Features]· Carbide drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
                                                Ler mais
                                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                3.03 ~ 12.0315 ~ 60Aluminum[○]Carbide65 ~ 120End Mill ShankAvailableOtherAvailable
                                                Preço (excluindo IVA) a partir de:
                                                98.10 €
                                                Data de envio regular:
                                                6 dias úteis
                                                Configurar

                                              Produtos recentemente visualizados