Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!
Phoenix Head Replaceable Type Drills (work material: Copper)
An indexable drill is a drill with a replaceable tip attached to the tip of the drill. Drills are tools that perform drilling, which is indispensable for machining, however, if used for a long time, the cutting edge will wear. In this case, you must either grind the cutting edge to improve cutting performance, or replace the drill body before using it. With the indexable drill, if the cutting edge becomes worn, it is possible to replace only the insert at the tip instead of the drill body, so maintenance work time and cost reduction can be expected, especially when the machining diameter is large. There are many variations in the shape and size of the drill, and the shape and material of the tip to be mounted also vary. There are drills that can handle multiple inserts, and various work materials and holes can be machined.
15 itens
* Informações sobre dias de expedição, custos de expedição e preços
GUHRING
[Features]· Also suitable for hole drilling up to 1.5D and drilling deep pilot holes.· Internal oil supply type.Ler maisHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - Copper[○] - 84 ～ 194 - N/A - Available ConfigurarPreço (excluindo IVA) a partir de:316.67 €Data de envio regular:8 dias úteis
- Volume Discount
OSG
Phoenix Head Replaceable Drill PXD Head PXD-NC
Hole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 14 ～ 25.4 - Copper[○] - - - Available Other - ConfigurarPreço (excluindo IVA) a partir de:76.30 €Data de envio regular:6 dias úteis
SANDVIK
SANDVIK CoroDrill 880 Indexable Insert Drill
[Specifications]・Drill type: Indexable insert drill・eClass-5.1: 21010103[Features]・Wiper geometry for best surface finish or higher feed possibilities・Optimized chip channels for accelerated chip evacuation・Easy identification thanks to laser marking with drill, insert, and screw codes on the drill shank・Two or four cutting edges depending on drill diameter・Optimized geometries assure high performance in most materials・Optimized grades assure longer insert tool lifeLer maisHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 12 ～ 84 212.77 ～ 339.15 Copper[○] - 295 ～ 404 - - - - ConfigurarPreço (excluindo IVA) a partir de:627.00 €Data de envio regular:5 dias úteis
GUHRING
[Features]· Can be used for both hole drilling up to 1 X D and chamfering at the same time.· Suitable for deep pilot hole machining.· Internal oil supply type.Ler maisHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - Copper[○] - 81 ～ 173 - N/A - Available ConfigurarPreço (excluindo IVA) a partir de:452.13 €Data de envio regular:24 dias úteis
GUHRING
[Features]· Enables stable machining with the reliable clamping method and highly rigid body.· Unique groove shape and coolant duct position provide excellent chip discharge properties.· Internal oil supply type.Ler maisHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - Copper[○] - 182 ～ 441 - N/A - Available ConfigurarPreço (excluindo IVA) a partir de:630.31 €Data de envio regular:8 dias úteis
GUHRING
[Features]· Enables stable machining with the reliable clamping method and highly rigid body.· Internal oil supply type.Ler maisHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - Copper[○] - 101 ～ 254 - N/A - Available ConfigurarPreço (excluindo IVA) a partir de:395.91 €Data de envio regular:8 dias úteis
GUHRING
Holder 3 x D with Oil Hole RT800WP 5242
[Features]· Unique tip clamping method enables tips to be quickly and easily interchanged even within the machine.· Can always machine with a new cutting edge, so productivity and consistency are excellent, and cost reductions and simplified tool management can be achieved.· Internal oil supply type.Ler maisHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - 76 ～ 167 Copper[○] - 130 ～ 231 - N/A - Available ConfigurarPreço (excluindo IVA) a partir de:588.48 €Data de envio regular:8 dias úteis
GUHRING
[Features]· Enables stable machining with the reliable clamping method and highly rigid body.· Unique groove shape and coolant duct position provide excellent chip discharge properties.· Internal oil supply type.Ler maisHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - Copper[○] - 124 ～ 334 - N/A - Available ConfigurarPreço (excluindo IVA) a partir de:476.36 €Data de envio regular:8 dias úteis
GUHRING
Holder 5 x D with Oil Hole RT800WP 5243
[Features]· Unique tip clamping method enables tips to be quickly and easily interchanged even within the machine.· Can always machine with a new cutting edge, so productivity and consistency are excellent, and cost reductions and simplified tool management can be achieved.· Internal oil supply type.Ler maisHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - 112 ～ 247 Copper[○] - 166 ～ 311 - N/A - Available ConfigurarPreço (excluindo IVA) a partir de:602.53 €Data de envio regular:8 dias úteis
GUHRING
[Features]· Enables stable machining with the reliable clamping method and highly rigid body.· Unique groove shape and coolant duct position provide excellent chip discharge properties.· Internal oil supply type.Ler maisHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - Copper[○] - 147 ～ 344 - N/A - Available ConfigurarPreço (excluindo IVA) a partir de:504.47 €Data de envio regular:8 dias úteis
GUHRING
Holder 7 x D with Oil Hole RT800WP 5248
[Features]· Unique tip clamping method enables tips to be quickly and easily interchanged even within the machine.· Can always machine with a new cutting edge, so productivity and consistency are excellent, and cost reductions and simplified tool management can be achieved.· Internal oil supply type.Ler maisHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - 148 ～ 327 Copper[○] - 202 ～ 391 - N/A - Available ConfigurarPreço (excluindo IVA) a partir de:652.12 €Data de envio regular:24 dias úteis
OSG
Indexable drills that can stably perform hole drilling with 2D depth.Ler maisHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 21 ～ 33.5 - Copper[○] Carbide 121 ～ 160 End Mill Shank N/A Non-Coated Available ConfigurarPreço (excluindo IVA) a partir de:316.60 €Data de envio regular:6 dias úteis
OSG
Indexable insert drill that can perform stable drilling with 3D depth.Ler maisHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 21 ～ 50.5 - Copper[○] Carbide 142 ～ 252 End Mill Shank N/A Non-Coated Available ConfigurarPreço (excluindo IVA) a partir de:355.70 €Data de envio regular:6 dias úteis
OSG
Hole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 21 ～ 33.5 - Copper[○] Carbide 163 ～ 227 End Mill Shank N/A Non-Coated Available ConfigurarPreço (excluindo IVA) a partir de:505.90 €Data de envio regular:6 dias úteis
SANDVIK
SANDVIK CoroDrill 880 Drill Body for Cassettes
Hole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 65 ～ 80 - Copper[○] - - - - - - ConfigurarPreço (excluindo IVA) a partir de:1,287.62 €Data de envio regular:5 dias úteis
