Registar
Condições de filtragem

Limpar tudo

  • Estoque
  • Screw size (Nominal)
  • Pitch (P), Number of Threading(mm)
  • Chamfer threads (Lcf)
  • Screw-Hole-Related Tools

    Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.
    • A Tap Series, Spiral Tap, A-SFT
      • DESCONTO
      • Volume Discount

      OSG

      A Tap Series, Spiral Tap, A-SFT

      Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.
      Ler mais
      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
      Meter / Unified1-8UNC ~ M560.25 ~ 5.51.5P ~ 2.5PPowder high-speed steel / Vanadium High-Speed SteelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Spiral TapFor blind holeAvailable
      Preço regular (excluindo IVA):
      16.04 €
      Preço regular (excluindo IVA):
      Preço especial
      Data de envio regular:
      Item em stock: 1 dia útil
      Alguns artigos podem ser enviados no próprio dia
      Configurar
    • Spiral Tap Series, General Purpose EX-SFT
      • DESCONTO
      • Volume Discount
      • Stock

      OSG

      Spiral Tap Series, General Purpose EX-SFT

      Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.
      Ler mais
      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
      Meter / Unified1UN ~ M560.25 ~ 482.5P ~ 3PVanadium High-Speed SteelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Spiral TapFor blind holeN/A
      Preço regular (excluindo IVA):
      7.97 €
      Preço regular (excluindo IVA):
      Preço especial
      Data de envio regular:
      Item em stock: 1 dia útil
      Alguns artigos podem ser enviados no próprio dia
      Configurar
    • Taper Tap Series for Pipes General Applications TPT
      • DESCONTO
      • Volume Discount

      OSG

      Taper Tap Series for Pipes General Applications TPT

      For use when machining tapered female threads for pipes. Long threaded type used primarily for connecting pipe-shaped items
      Ler mais
      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
      Taper for PipeR1 ~ R7/811 ~ 282.5PHigh-speed steelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Tap for pipesFor through hole / For blind holeN/A
      Preço regular (excluindo IVA):
      17.00 €
      Preço regular (excluindo IVA):
      Preço especial
      Data de envio regular:
      Item em stock: 1 dia útil
      Alguns artigos podem ser enviados no próprio dia
      Configurar
    • Spiral Tap Series, for Stainless EX-SUS-SFT
      • Volume Discount

      OSG

      Spiral Tap Series, for Stainless EX-SUS-SFT

      Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.
      Ler mais
      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
      Meter / Unified / Whitworth1UN ~ M420.4 ~ 482.5P ~ 3PVanadium High-Speed SteelStainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Spiral TapFor blind holeN/A
      Preço regular (excluindo IVA):
      8.81 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • Thread Cutting Tool (for Unified Threads) MMTU

        NS TOOL

        Thread Cutting Tool (for Unified Threads) MMTU

        [Features]・ Adopts a blade shape with an emphasis on sharpness, improving machining precision.・ Adopts MUGEN Coating Premium for the realization of a long life.・ For Unified Standard threads
        Ler mais
        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
        UnifiedNO.0-80UNF ~ 1/4-20UNC--CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Thread cutterFor blind holeAvailable
        Preço regular (excluindo IVA):
        108.22 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes

          SANDVIK

          SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes

          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          Meter / Unified / WhitworthG 1" ~ M48-------
          Preço regular (excluindo IVA):
          17.98 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • High-Speed Steel Hand Tap
          • Volume Discount

          MISUMI

          High-Speed Steel Hand Tap【10 unidades】

          [Features] A general purpose hand tap made from uncoated high speed steelHigh versatility, suitable for a wide range of applications and materials such as aluminium and general steel.
          Ler mais
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          MeterM3 ~ M100.5 ~ 1.51.5 P ~ 9 PVanadium High-Speed SteelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Hand TapFor through hole / For blind holeN/A
          Preço regular (excluindo IVA):
          34.59 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • Thread repair kit
          • Volume Discount

          REX TOOLS

          Thread repair kit

          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          -M5 ~ M12-------
          Preço regular (excluindo IVA):
          23.55 €
          Data de envio regular:
          3 dias úteis
          Configurar
        • Carbide Tap for Ultra High Hardness Steel UH-CT

            YAMAWA MFG

            Carbide Tap for Ultra High Hardness Steel UH-CT

            [SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.
            Ler mais
            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
            MeterM2 ~ M200.4 ~ 2.55PCarbideHigh Hardness Steel (50-60 HRC)[○]Point tapFor through hole / For blind holeAvailable
            Preço regular (excluindo IVA):
            102.84 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • Parallel Tap Series for Pipes General Applications SPT
            • DESCONTO
            • Volume Discount

            OSG

            Parallel Tap Series for Pipes General Applications SPT

            For use when machining parallel female pipe taper threads and female pipe parallel threads
            Ler mais
            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
            Parallel for PipesG1 ~ G7/811 ~ 281.5P ~ 4PHigh-speed steelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Tap for pipesFor through hole / For blind holeN/A
            Preço regular (excluindo IVA):
            14.96 €
            Preço regular (excluindo IVA):
            Preço especial
            Data de envio regular:
            Item em stock: 1 dia útil
            Alguns artigos podem ser enviados no próprio dia
            Configurar
          • Carbide Spiral Tap
            • Volume Discount

            MISUMI

            Carbide Spiral Tap

            [Features] -Carbide tap with uncoated spiral flute-Can be used for machining blind holes-Suitable for mass production of aluminium and copper alloys
            Ler mais
            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
            MeterM3 ~ M100.5 ~ 1.51.5 P ~ 2.5 PCarbideSteel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Spiral TapFor blind holeN/A
            Preço regular (excluindo IVA):
            34.46 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • MT Series High-Speed Steel Point Tap
            • Volume Discount

            MISUMI

            MT Series High-Speed Steel Point Tap

            [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.
            Ler mais
            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
            MeterM2 ~ M240.4 ~ 35 PCobalt HSSLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Point tapFor through holeN/A
            Preço regular (excluindo IVA):
            7.09 €
            Data de envio regular:
            5 dias úteis
            Configurar
          • Insert Screw Tap Series, Hand Tap HL-HT
            • Volume Discount

            OSG

            Insert Screw Tap Series, Hand Tap HL-HT

            Used for female thread tapping in insertion of helical coil. Compared to ordinary taps of average size, the pitch is the same but outer diameter in just the inserting part is made larger.
            Ler mais
            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
            UnifiedNo8UN325PHigh-speed steelAluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎]Hand TapFor through hole / For blind holeN/A
            Preço regular (excluindo IVA):
            12.11 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • Spatter Removal Tap Series, for Female Thread Repair / Removal of Weld Spatters, SR-HT
            • Volume Discount

            OSG

            Spatter Removal Tap Series, for Female Thread Repair / Removal of Weld Spatters, SR-HT

            Ideal for removing weld spatter and cutting chips inside the internal thread.Tool material: vanadium high-speed steelCoating: surface treatment, uncoatedNumber of threads on chamfer: 5PAccuracy (grade) 0.06
            Ler mais
            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
            MeterM5 ~ M120.8 ~ 1.255PVanadium High-Speed Steel-Modification/removal ToolFor through hole / For blind holeN/A
            Preço regular (excluindo IVA):
            8.39 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • Hand Tap Series, for General, HT
            • DESCONTO
            • Volume Discount

            OSG

            Hand Tap Series, for General, HT

            High speed steel hand tap.Working material: magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible.
            Ler mais
            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
            Meter / Unified / Whitworth / Sewing MachineW1"1/4 ~ M350.5 ~ 401.5P ~ 9PHigh-speed steelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Hand TapFor through hole / For blind holeN/A
            Preço regular (excluindo IVA):
            8.29 €
            Preço regular (excluindo IVA):
            Preço especial
            Data de envio regular:
            Item em stock: 1 dia útil
            Alguns artigos podem ser enviados no próprio dia
            Configurar
          • Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT

              OSG

              Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT

              Suitable for 50 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, Etc.) Tapping
              Ler mais
              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
              MeterM2 ~ M200.4 ~ 2.53PCarbideHigh Hardness Steel (50-60 HRC)[◎]Hand TapFor through hole / For blind holeAvailable
              Preço regular (excluindo IVA):
              83.15 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • Point Tap Series, for General, EX-POT
              • DESCONTO
              • Volume Discount

              OSG

              Point Tap Series, for General, EX-POT

              Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference
              Ler mais
              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
              Meter / Unified / Whitworth / Sewing MachineNo0UN ~ M480.25 ~ 805PVanadium High-Speed SteelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Point tapFor through holeN/A
              Preço regular (excluindo IVA):
              7.45 €
              Preço regular (excluindo IVA):
              Preço especial
              Data de envio regular:
              Item em stock: 1 dia útil
              Alguns artigos podem ser enviados no próprio dia
              Configurar
            • Carbide Solid Mill Thread Unified Screw (UN)

                CARMEX

                Carbide Solid Mill Thread Unified Screw (UN)

                For internal threading.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.
                Ler mais
                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                Unified---CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Thread cutterFor blind holeAvailable
                Preço regular (excluindo IVA):
                229.39 €
                Data de envio regular:
                6 dias úteis
                Configurar
                • Volume Discount

                CARMEX

                Carbide Solid Tapered End Mill

                [Features]· Carbide solid tapered end mills are used for pre-process machining when thread milling the screws of tapered shapes such as pipe screws.· Increases the service life of solid carbide type mill threads or mill thread tips.· Equal and proper load will be applied to the cutting edge of the mill thread cutter.· By applying taper shape pre-processing, the machining time of the mill thread is shortened
                Ler mais
                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                Taper for Pipe---CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Thread cutter-Available
                Preço regular (excluindo IVA):
                119.87 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-S
                • DESCONTO
                • Volume Discount

                OSG

                Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-S

                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                Meter / Unified / Whitworth / Sewing Machine1UN ~ M480.25 ~ 64-Alloy HSS-Die-N/A
                Preço regular (excluindo IVA):
                27.19 €
                Preço regular (excluindo IVA):
                Preço especial
                Data de envio regular:
                Item em stock: 1 dia útil
                Alguns artigos podem ser enviados no próprio dia
                Configurar
              • H-HL-SFT, Powder metal low spiral-fluted cutting tap for blind holes, Helicoil EG-MJ

                  OSG

                  H-HL-SFT, Powder metal low spiral-fluted cutting tap for blind holes, Helicoil EG-MJ

                  For hardened steels up to 45 HRC - For thread insert
                  Ler mais
                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                  ---------
                  Preço regular (excluindo IVA):
                  41.40 €
                  Data de envio regular:
                  2 dias úteis
                  Configurar
                • Hand tap, Finish tap
                  • Volume Discount

                  RUKO

                  Hand tap, Finish tap

                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                  MeterM2--High-speed steel-Hand Tap--
                  Preço regular (excluindo IVA):
                  5.27 €
                  Data de envio regular:
                  3 dias úteis
                  Configurar
                • TiN Coated High-Speed Steel Roll Tap

                    MISUMI

                    TiN Coated High-Speed Steel Roll Tap【5 unidades】

                    [Features] -Used for tapping that produces no chips-Suitable for a wide range of materials, from general steel to non-ferrous alloys-Excellent abrasion resistance and chip weld resistance due to TiN coating.
                    Ler mais
                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                    MeterM3 ~ M100.5 ~ 1.52 P ~ 4 PVanadium High-Speed SteelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Roll tapFor through hole / For blind holeAvailable
                    Preço regular (excluindo IVA):
                    56.10 €
                    Data de envio regular:
                    5 dias úteis
                    Configurar
                  • Carbide Hand Tap
                    • Volume Discount

                    MISUMI

                    Carbide Hand Tap

                    [Features] -Hand taps made from uncoated carbide-Can be used for both blind holes and through holes-Suitable for mass production of taps for various cast irons.
                    Ler mais
                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                    MeterM3 ~ M100.5 ~ 1.51.5 P ~ 3 PCarbideSteel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○]Hand TapFor through hole / For blind holeN/A
                    Preço regular (excluindo IVA):
                    34.46 €
                    Data de envio regular:
                    5 dias úteis
                    Configurar
                  • Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

                      OSG

                      Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

                      In applying HR coating with high welding-resisting properties on nickel based alloys, it achieves a long operating life even on aging nickel based alloys (40-45 HRC)
                      Ler mais
                      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                      MeterM81.255PPowder high-speed steelNickel-based alloy (Inconel, etc.)[◎]Point tapFor blind holeAvailable
                      Preço regular (excluindo IVA):
                      28.34 €
                      Data de envio regular:
                      6 dias úteis
                      Configurar
                    • Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT

                        OSG

                        Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT

                        Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.
                        Ler mais
                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                        MeterM3 ~ M200.5 ~ 2.51.5P ~ 3PCarbideCast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Hand TapFor through hole / For blind holeN/A
                        Preço regular (excluindo IVA):
                        88.83 €
                        Data de envio regular:
                        6 dias úteis
                        Configurar
                      • Point Tap Series, Tin Coated, TIN-POT
                        • Volume Discount

                        OSG

                        Point Tap Series, Tin Coated, TIN-POT

                        Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel
                        Ler mais
                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                        MeterM1.4 ~ M420.3 ~ 4.55PVanadium High-Speed SteelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Point tapFor through holeAvailable
                        Preço regular (excluindo IVA):
                        15.45 €
                        Data de envio regular:
                        6 dias úteis
                        Configurar
                      • Groove-Free Tap Series, Tin Coated, TIN-NRT
                        • DESCONTO
                        • Volume Discount

                        OSG

                        Groove-Free Tap Series, Tin Coated, TIN-NRT

                        Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.
                        Ler mais
                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                        Meter / UnifiedNo0UN ~ M200.25 ~ 802P ~ 4PVanadium High-Speed SteelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Roll tapFor blind holeAvailable
                        Preço regular (excluindo IVA):
                        17.52 €
                        Preço regular (excluindo IVA):
                        Preço especial
                        Data de envio regular:
                        Item em stock: 1 dia útil
                        Alguns artigos podem ser enviados no próprio dia
                        Configurar
                      • Broken Tap Extractor Set

                          TRUSCO NAKAYAMA

                          Broken Tap Extractor Set【5 a 7 unidades】

                          [Characteristics] When a tap breaks during work, this tool can be used to easily remove taps that have broken with damaging the screw threads. Because a special steel string is used for the claw, it features a high twisting strength and does not break easily. It also easily removes taps that have become deeply sunk in or broken. Even if the claw becomes damaged, it can be used many times until it becomes short. Also offers easy replacement of spare nails, making it extremely economic. Especially for use with hand taps. [Use] For removal of bent hand taps.
                          Ler mais
                          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                          ------Modification/removal Tool--
                          Preço regular (excluindo IVA):
                          158.24 €
                          Data de envio regular:
                          6 dias úteis
                          Configurar
                        • A Tap Series for Pipes Point Tap A-POT
                          • Volume Discount

                          OSG

                          A Tap Series for Pipes Point Tap A-POT

                          Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.
                          Ler mais
                          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                          Meter / Unified1/2-20UNF ~ M240.25 ~ 35PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]Point tapFor through holeAvailable
                          Preço regular (excluindo IVA):
                          15.94 €
                          Data de envio regular:
                          6 dias úteis
                          Configurar
                        • Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP
                          • Volume Discount

                          YAMAWA MFG

                          Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP

                          Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.
                          Ler mais
                          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                          MeterM4 ~ M160.7 ~ 23PHigh-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]Spiral TapFor blind holeN/A
                          Preço regular (excluindo IVA):
                          15.61 €
                          Data de envio regular:
                          Item em stock: 1 dia útil
                          Alguns artigos podem ser enviados no próprio dia
                          Configurar
                        • A Tap Series, Spiral Tap, Long Shank A-LT-SFT

                            OSG

                            A Tap Series, Spiral Tap, Long Shank A-LT-SFT

                            Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.
                            Ler mais
                            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                            MeterM2 ~ M240.25 ~ 32.5PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Spiral TapFor blind holeAvailable
                            Preço regular (excluindo IVA):
                            24.50 €
                            Data de envio regular:
                            6 dias úteis
                            Configurar
                          • S-LT-SFT, HSSE spiral-fluted cutting tap for blind holes, Metric

                              OSG

                              S-LT-SFT, HSSE spiral-fluted cutting tap for blind holes, Metric

                              General purpose tapping in steels and stainless steels - Long reach threading
                              Ler mais
                              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                              ---------
                              Preço regular (excluindo IVA):
                              35.40 €
                              Data de envio regular:
                              2 dias úteis
                              Configurar
                            • S-SFT, HSSE spiral-fluted cutting tap for blind holes, BSF

                                OSG

                                S-SFT, HSSE spiral-fluted cutting tap for blind holes, BSF

                                General purpose tapping in steels and stainless steels
                                Ler mais
                                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                ---------
                                Preço regular (excluindo IVA):
                                36.90 €
                                Data de envio regular:
                                2 dias úteis
                                Configurar
                              • CC-HL-SFT, HSSE spiral-fluted cutting tap for blind holes, Helicoil EG-M

                                  OSG

                                  CC-HL-SFT, HSSE spiral-fluted cutting tap for blind holes, Helicoil EG-M

                                  For general steels, stainless steels, aluminum - Developed for rigid tapping on CNC machines - For thread insert
                                  Ler mais
                                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                  ---------
                                  Preço regular (excluindo IVA):
                                  31.60 €
                                  Data de envio regular:
                                  2 dias úteis
                                  Configurar
                                • CC-HL-SFT, HSSE spiral-fluted cutting tap for blind holes, Helicoil EG-UNJF

                                    OSG

                                    CC-HL-SFT, HSSE spiral-fluted cutting tap for blind holes, Helicoil EG-UNJF

                                    For general steels, stainless steels, aluminum - Developed for rigid tapping on CNC machines - For thread insert
                                    Ler mais
                                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                    ---------
                                    Preço regular (excluindo IVA):
                                    45.10 €
                                    Data de envio regular:
                                    2 dias úteis
                                    Configurar
                                  • S-TPT, HSS straight flute cutting tap for through & blind holes

                                      OSG

                                      S-TPT, HSS straight flute cutting tap for through & blind holes

                                      General purpose tapping in steels and stainless steels - RC (BSPT) tapered 1:16
                                      Ler mais
                                      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                      ---------
                                      Preço regular (excluindo IVA):
                                      56.80 €
                                      Data de envio regular:
                                      2 dias úteis
                                      Configurar
                                    • Screw extractor set
                                      • Volume Discount

                                      BAHCO

                                      Screw extractor set

                                      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                      ---------
                                      Preço regular (excluindo IVA):
                                      114.71 €
                                      Data de envio regular:
                                      3 dias úteis
                                      Configurar
                                    • Hand tap set
                                      • Volume Discount

                                      REX TOOLS

                                      Hand tap set

                                      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                      -M3 ~ Mf32-------
                                      Preço regular (excluindo IVA):
                                      11.68 €
                                      Data de envio regular:
                                      3 dias úteis
                                      Configurar
                                    • SANDVIK CoroTap 200 Cutting Tap with Spiral Point

                                        SANDVIK

                                        SANDVIK CoroTap 200 Cutting Tap with Spiral Point

                                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                        Meter / Unified / WhitworthG 1" ~ MF30-------
                                        Preço regular (excluindo IVA):
                                        19.18 €
                                        Data de envio regular:
                                        5 dias úteis
                                        Configurar
                                      • TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
                                        • Volume Discount

                                        MISUMI

                                        TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

                                        Threading cutters that enable the high-speed stable processing are available at special prices
                                        Ler mais
                                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                        MeterM3 ~ M200.5 ~ 2.5-CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Thread cutterFor through hole / For blind holeAvailable
                                        Preço regular (excluindo IVA):
                                        112.49 €
                                        Data de envio regular:
                                        5 dias úteis
                                        Configurar
                                      • Outer Diameter Thread Correction Tool
                                        • DESCONTO
                                        • Volume Discount

                                        NOGAJAPAN

                                        Outer Diameter Thread Correction Tool【1 a 2 unidades】

                                        Thread ridge repair tool.[Features]· By turning the grip, the 2 blades are moved up and down.· Any size in the applicable range is usable (inch, metric, both left and right threaded).· Two blades have play on left and right and can be automatically applied to any pitch of screw.· There is no need to accurately measure the screws, so it can be kept on hand for immediate use.[Applications]· Ideal for repairing outer diameter screw threads.
                                        Ler mais
                                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                        ------Modification/removal Tool--
                                        Preço regular (excluindo IVA):
                                        26.98 €
                                        Preço regular (excluindo IVA):
                                        Preço especial
                                        Data de envio regular:
                                        Item em stock: 1 dia útil
                                        Alguns artigos podem ser enviados no próprio dia
                                        Configurar
                                      • Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT
                                        • Volume Discount

                                        OSG

                                        Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT

                                        Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap
                                        Ler mais
                                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                        MeterM2 ~ M360.4 ~ 42.5PVanadium High-Speed SteelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Spiral TapFor blind holeN/A
                                        Preço regular (excluindo IVA):
                                        14.47 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar
                                      • Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT
                                        • Volume Discount

                                        OSG

                                        Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT

                                        Suitable for 42-52 HRC tempered steel (alloy steel, die steel, tool steel, etc.) tapping. Excellent Abrasion Resistant V Coating Has Been Applied to Maximize the Properties of the Base Material on the Surface
                                        Ler mais
                                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                        MeterM3 ~ M120.5 ~ 1.752.5P ~ 5PPowder high-speed steelQuenched and tempered steel (45 to 55 HRC)[◎]Hand TapFor through hole / For blind holeAvailable
                                        Preço regular (excluindo IVA):
                                        26.47 €
                                        Data de envio regular:
                                        Item em stock: 1 dia útil
                                        Alguns artigos podem ser enviados no próprio dia
                                        Configurar
                                      • Hand Tap Series, Super Hard Hand Tap, OTT

                                          OSG

                                          Hand Tap Series, Super Hard Hand Tap, OTT

                                          Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.
                                          Ler mais
                                          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                          MeterM1.4 ~ M200.3 ~ 2.51.5P ~ 3PCarbideCast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Hand TapFor through hole / For blind holeN/A
                                          Preço regular (excluindo IVA):
                                          60.78 €
                                          Data de envio regular:
                                          6 dias úteis
                                          Configurar