Condições de filtragem

Limpar tudo

Estoque
Mostrar apenas artigos em stock

Screw Types

Meter
Unified

Screw size (Nominal)

M1.2

Pitch (P), Number of Threading(mm)

0.2
0.25

Chamfer threads (Lcf)

1P
1.5P
2P
2.5P
3P
4P
5P

Tool Material Type

High-speed steel
Powder high-speed steel
Carbide
Vanadium High-Speed Steel

work material

Low-Carbon Steel (carbon alloy less than 0.25%)
Medium carbon steel (carbon content 0.25 to 0.45%)
High Carbon Steel (C with a content over 0.45%)
Alloy Steel (SCM)
Stainless Steel (JIS-SUS)
Quenched and tempered steel (25 to 35 HRC)
Quenched and tempered steel (35 to 45 HRC)
Steel casting (SC)
Cast Iron (FC)
Ductile Cast Iron (FCD)
Copper (Cu)
Brass (Bs)
Brass cast iron (BsC)
Bronze (Pb)
Aluminum Rolled Material (AL)
Aluminum Alloy Casting (AC, ADC)
Magnesium Alloy (MC)
Zinc Alloy Casting (ZDC)
Titanium Alloy (Ti-6Al-4V, etc)
Nickel-based alloy (Inconel, etc.)
Thermosetting plastic (bakelite, phenol, etc.)
Thermoplastic plastic (vinyl chloride, nylon, etc.)

Tap Type

Spiral Tap
Point tap
Roll tap
Thread cutter

Hole type

For through hole
For blind hole

Coating Y/N

Available
N/A

Coating Type

TiCN
TiN
Non-Coated
Nitriding Treatment
Other

Overall Length (L)(mm)

Fabricante

Screw-Hole-Related Tools (Screw size (Nominal): M1.2)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

15 itens

* Informações sobre dias de expedição, custos de expedição e preços

Lista

Foto

Comparar especificações

Número de itens a exibir:Ordenar por:

Data de envio:

Spiral Tap Series, General Purpose EX-SFT

DESCONTO
Volume Discount
Stock

OSG

Spiral Tap Series, General Purpose EX-SFT

Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.

Ler mais

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M1.2	0.25	2.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

Preço regular (excluindo IVA):

19.66 €

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

6 dias úteis

Configurar

Groove-Free Tap Series X Performer S-XPF

DESCONTO
Volume Discount

OSG

Groove-Free Tap Series X Performer S-XPF

When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts * M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.

Ler mais

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M1.2	0.25	2P ～ 4P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Roll tap	For through hole / For blind hole	Available

Preço regular (excluindo IVA):

25.33 €

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

6 dias úteis

Configurar

Groove-Free Tap Series, Tin Coated, TIN-NRT

DESCONTO
Volume Discount

OSG

Groove-Free Tap Series, Tin Coated, TIN-NRT

Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.

Ler mais

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M1.2	0.25	2P ～ 4P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Roll tap	For blind hole	Available

Preço regular (excluindo IVA):

22.43 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

6 dias úteis

Configurar

DESCONTO
Volume Discount

OSG

Point Tap Series, for General, EX-POT

Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

Ler mais

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M1.2	0.25	5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

Preço regular (excluindo IVA):

22.58 €

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Envio possível no próprio dia

Configurar

Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT

DESCONTO
Volume Discount

OSG

Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Ler mais

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M1.2	0.25	1P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Roll tap	For blind hole	Available

Preço regular (excluindo IVA):

26.13 €

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

6 dias úteis

Configurar

OSG

Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Ler mais

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M1.2	0.25	2P ～ 4P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Roll tap	For blind hole	Available

Preço regular (excluindo IVA):

33.34 €

Data de envio regular:

6 dias úteis

Configurar

SANDVIK
SANDVIK CoroTap 200 Cutting Tap with Spiral Point
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
Meter M1.2 - - - - - - -
Preço regular (excluindo IVA):
67.46 €
Data de envio regular:
5 dias úteis
Configurar
SANDVIK
SANDVIK CoroTap 400 Forming Tap
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
Meter M1.2 - - - - - - -
Preço regular (excluindo IVA):
63.89 €～
Data de envio regular:
5 dias úteis
Configurar

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M1.2	-	-	-	-	-	-	-

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M1.2	-	-	-	-	-	-	-

Spiral Tap Series, Short Chamfer Type, EX-SC-SFT

DESCONTO
Volume Discount

OSG

Spiral Tap Series, Short Chamfer Type, EX-SC-SFT

Bite length is 1.5 threads per inch. For Blind Holes Where it Can't Secure an Effective Screw Length With a Standard Spiral Tap with 2.5 Threads Per Inch

Ler mais

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M1.2	0.25	1.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	Spiral Tap	For blind hole	N/A

Preço regular (excluindo IVA):

20.12 €

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

8 dias úteis

Configurar

Groove-Free Tap Series IT New Roll IT-NRT

Volume Discount

OSG

Groove-Free Tap Series IT New Roll IT-NRT

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Ler mais

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M1.2	0.25	2P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Roll tap	For blind hole	Available

Preço regular (excluindo IVA):

26.13 €

Data de envio regular:

6 dias úteis

Configurar

Groove-Free Tap Series VP New Roll VP-NRT

Volume Discount

OSG

Groove-Free Tap Series VP New Roll VP-NRT

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Ler mais

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M1.2	0.25	2P ～ 4P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Roll tap	For blind hole	Available

Preço regular (excluindo IVA):

24.33 €

Data de envio regular:

6 dias úteis

Configurar

DESCONTO
Volume Discount

TANOI MFG

IT-Toughlet C Coated

Rise tap with a correct bite without pitch or angle errors.

Ler mais

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M1.2	0.2 ～ 0.25	1P ～ 4P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Roll tap	-	Available

Preço regular (excluindo IVA):

64.44 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

6 dias úteis

Configurar

DESCONTO

TANOI MFG

IT-Toughlet TiCN Coated

Rise tap with a correct bite without pitch or angle errors.

Ler mais

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M1.2	0.2 ～ 0.25	1P ～ 4P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Roll tap	-	Available

Preço regular (excluindo IVA):

64.44 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

6 dias úteis

Configurar

High Performance Roll Tap HP+ RZ / HP-RZ

Volume Discount

YAMAWA MFG

High Performance Roll Tap HP+ RZ / HP-RZ

It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)

Ler mais

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Unified	M1.2	0.25	2P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Roll tap	For through hole / For blind hole	Available

Preço regular (excluindo IVA):

39.84 €

Data de envio regular:

8 dias úteis

Configurar

CARMEX

MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws

Metric thread / for I.D. thread[Features]· Ultra-fine particle carbide with an advanced three layer PVD blue coating

Ler mais

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M1.2	0.25	-	Carbide	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Thread cutter	For blind hole	Available

Preço regular (excluindo IVA):

204.63 €

Data de envio regular:

6 dias úteis

Configurar

Screw-Hole-Related Tools (Screw size (Nominal): M1.2)

Categorias relacionadas com Screw-Hole-Related Tools