Screw-Hole-Related Tools (Chamfer threads (Lcf): 2.5P)
Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.
81 itens
* Informações sobre dias de expedição, custos de expedição e preços
- DESCONTO
- Volume Discount
OSG
A Tap Series, Spiral Tap, A-SFT
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Unified 1-8UNC ～ M56 0.25 ～ 5.5 2.5P Powder high-speed steel / Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Spiral Tap For blind hole Available ConfigurarPreço regular (excluindo IVA):16.04 €～Preço regular (excluindo IVA):Preço especialData de envio regular:Item em stock: 1 dia útilAlguns artigos podem ser enviados no próprio dia
- DESCONTO
- Volume Discount
OSG
Taper Tap Series for Pipes General Applications TPT
For use when machining tapered female threads for pipes. Long threaded type used primarily for connecting pipe-shaped itemsLer maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R7/8 11 ～ 28 2.5P High-speed steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Tap for pipes For through hole / For blind hole N/A ConfigurarPreço regular (excluindo IVA):17.00 €～Preço regular (excluindo IVA):Preço especialData de envio regular:Item em stock: 1 dia útilAlguns artigos podem ser enviados no próprio dia
- Volume Discount
OSG
Spiral Tap Series, for Stainless EX-SUS-SFT
Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Unified / Whitworth 1UN ～ M33 0.4 ～ 48 2.5P Vanadium High-Speed Steel Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] Spiral Tap For blind hole N/A ConfigurarPreço regular (excluindo IVA):8.81 €～Data de envio regular:6 dias úteis
- DESCONTO
- Volume Discount
- Stock
OSG
Spiral Tap Series, General Purpose EX-SFT
Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Unified 1UN ～ M56 0.25 ～ 48 2.5P Vanadium High-Speed Steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole N/A ConfigurarPreço regular (excluindo IVA):7.97 €～Preço regular (excluindo IVA):Preço especialData de envio regular:Item em stock: 1 dia útilAlguns artigos podem ser enviados no próprio dia
- Volume Discount
OSG
Spiral Tap Series, for Aluminum, EX-AL-SFT
Suitable for tapping blind hole of nonferrous metal such as aluminum and its alloys, and die-castLer maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M8 1 2.5P Vanadium High-Speed Steel Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] Spiral Tap For blind hole N/A ConfigurarPreço regular (excluindo IVA):15.96 €Data de envio regular:6 dias úteis
- Volume Discount
OSG
Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT
Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tapLer maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2 ～ M36 0.4 ～ 4 2.5P Vanadium High-Speed Steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole N/A ConfigurarPreço regular (excluindo IVA):14.47 €～Data de envio regular:6 dias úteis
OSG
A Tap Series, Spiral Tap, Long Shank A-LT-SFT
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2 ～ M24 0.25 ～ 3 2.5P Powder high-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Spiral Tap For blind hole Available ConfigurarPreço regular (excluindo IVA):24.50 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT
Allows internal threading of stainless steel with a water soluble cutting fluid.Tool material: Vanadium high speed steelHole type: For blind holesMaterial: General steel/stainless steel.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2 ～ M24 0.4 ～ 3 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] Spiral Tap For blind hole Available ConfigurarPreço regular (excluindo IVA):17.56 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT
Suitable for 42-52 HRC tempered steel (alloy steel, die steel, tool steel, etc.) tapping. Excellent Abrasion Resistant V Coating Has Been Applied to Maximize the Properties of the Base Material on the SurfaceLer maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M12 0.5 ～ 1.75 2.5P Powder high-speed steel Quenched and tempered steel (45 to 55 HRC)[◎] Hand Tap For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):26.47 €～Data de envio regular:8 dias úteis
OSG
Taper Tap Series for Pipes Short Screws for Stainless Steel Long Shank LT-SUS-S-TPT
This is a short thread, long shank type used for machining tapered internal threads. It is suitable for difficult-to-cut materials such as stainless steel.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1/2 ～ R3/8 14 ～ 28 2.5P Carbide Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Tap for pipes For through hole / For blind hole N/A ConfigurarPreço regular (excluindo IVA):46.86 €～Data de envio regular:6 dias úteis
YAMAWA MFG
Plus Series Spiral Tap +SP (N+SP)
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.[Features]· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.[Applications]· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2 ～ M6 0.4 ～ 1 2.5P High-speed steel - Spiral Tap For blind hole N/A ConfigurarPreço regular (excluindo IVA):11.10 €～Data de envio regular:6 dias úteis
NACHI(FUJIKOSHI)
G Spiral Tap for Deep Holes in Stainless Steel GSPS
Suited for stainless steel and materials that produce a lot of swarf.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M8 ～ M16 1.25 ～ 2 2.5P Alloy HSS Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] Spiral Tap For blind hole Available ConfigurarPreço regular (excluindo IVA):34.33 €～Data de envio regular:6 dias úteis
OSG
Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT
Combining spiral tap with knurled flutes has brought in highly rigid edges. Assure long-lasting, stable machining of nickel-based alloy (40 - 45 HRC) processed under aging treatment.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M4 ～ M8 0.7 ～ 1.25 2.5P Powder high-speed steel Nickel-based alloy (Inconel, etc.)[◎] Spiral Tap For through hole Available ConfigurarPreço regular (excluindo IVA):22.41 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT
Suitable for threading hardened steel up to 55 HRC.Material: High hardness steel up to 55 HRCFor coating / surface treatment / steelAccuracy (class) OH3Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M12 0.5 ～ 1.75 2.5P Carbide Quenched and tempered steel (45 to 55 HRC)[◎] Hand Tap For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):83.34 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Spiral Tap Series, Tin Coated, TIN-SFT
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M1.4 ～ M16 0.3 ～ 2 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole Available ConfigurarPreço regular (excluindo IVA):16.04 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M16 0.5 ～ 2 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole Available ConfigurarPreço regular (excluindo IVA):23.77 €～Data de envio regular:6 dias úteis
OSG
Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT
Optimal for machining pre-hardened steel alloys from 35 to 42 HRC.Tool material: Powder metal high-speed steelThread type: MetricHole type: For blind holesMaterial: General steel / heat-treated steelCoating: Surface treatment for steel.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M12 0.5 ～ 1.75 2.5P Powder high-speed steel High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] Spiral Tap For blind hole Available ConfigurarPreço regular (excluindo IVA):17.33 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Spiral Tap Series, V Coated, V-SFT
Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M16 0.5 ～ 2 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole Available ConfigurarPreço regular (excluindo IVA):17.63 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT
Ideal for deep hole drilling of stainless steel beyond 2D.Working material: Stainless steel / copper / resinCoating: Surface treatment, steam oxide treatment.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2.6 ～ M10 0.45 ～ 1.5 2.5P Vanadium High-Speed Steel Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] Spiral Tap For blind hole N/A ConfigurarPreço regular (excluindo IVA):10.88 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT
Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M24 0.5 ～ 3 2.5P Vanadium High-Speed Steel Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] Spiral Tap For blind hole N/A ConfigurarPreço regular (excluindo IVA):14.52 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Spiral Tap Series, Low Spiral LW-SFT
Debris is chopped into fine pieces and expelled backward thanks to the grooves with a weak twist, allowing for stable tapping. Also has good chipping resistance qualities.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M6 1 2.5P Vanadium High-Speed Steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole N/A ConfigurarPreço regular (excluindo IVA):9.50 €Data de envio regular:6 dias úteis
- Volume Discount
OSG
Spiral Tap Series, General Purpose Homogenization Treated EX-H-SFT
Suited for Drilling Blind Holes in Materials That Leave Coil Shaped Connected Cutting Debris Such as Carbon Steel, Alloyed Steel, and Non-Ferrous MetalsLer maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M16 ～ M24 1.5 ～ 3 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] Spiral Tap For blind hole N/A ConfigurarPreço regular (excluindo IVA):33.84 €～Data de envio regular:6 dias úteis
OSG
Spiral Tap Series, Carbide Spiral Tap OT-SFT
Suitable for massive tapping of blind hole of aluminum alloy/magnesium alloy/copper alloy/thermoplastic plastic by high precision automatic machineLer maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M12 0.5 ～ 1.75 2.5P Carbide Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole N/A ConfigurarPreço regular (excluindo IVA):72.40 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Spiral Tap Series, for Copper, CU-SFT
Treated With CRN Coating Which Shows Excellent Friction Resistance and Anti-Sticking Properties Against Copper and Use of HSSE as Material Allows Long Lived Machining on CopperLer maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M10 1.5 2.5P Vanadium High-Speed Steel Stainless Steel (JIS-SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole Available ConfigurarPreço regular (excluindo IVA):26.27 €Data de envio regular:6 dias úteis
- Volume Discount
OSG
Spiral Tap Series, for Soft Steel / Deep Holes MS-DH-SFT
Suitable for blind hole drilling where debris related tap jamming and internal thread biting can easily occur.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2.6 ～ M10 0.45 ～ 1.5 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole N/A ConfigurarPreço regular (excluindo IVA):8.89 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Spiral Tap Series, for Non-Ferrous Alloys / Deep Holes EX-B-DH-SFT
Suitable for blind hole drilling where debris related tap jamming and internal thread biting can easily occur.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M10 ～ M16 1.5 2.5P Vanadium High-Speed Steel Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole N/A ConfigurarPreço regular (excluindo IVA):14.22 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Taper Tap Series for Pipes TIN Coated TIN-TPT
TIN coating with excellent solvent resistance, abrasion resistance has been applied.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Tap for pipes For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):30.48 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Taper Tap Series for Pipes TIN Coating Interrupted Thread TIN-IRT
TIN coating with excellent solvent resistance, abrasion resistance has been applied.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎] Tap for pipes For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):39.15 €～Data de envio regular:6 dias úteis
OSG
Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws TIN-S-IRT
TIN coating with excellent solvent resistance, abrasion resistance has been applied.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎] Tap for pipes For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):41.25 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Taper Tap Series for Pipes TIN Coated Short Screws TIN-S-TPT
TIN coating with excellent solvent resistance, abrasion resistance has been applied.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Tap for pipes For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):31.88 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Taper Tap Series for Pipes For Aluminum V-AL-TPT
Ideal for taper female screw machining for aluminum alloy tube, as gouging of female screw occurs easilyLer maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P Vanadium High-Speed Steel Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] Tap for pipes For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):27.23 €～Data de envio regular:6 dias úteis
OSG
Taper Tap Series for Pipes Interrupted Threads Long Shank EX-LT-IRT
Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] Tap for pipes For through hole / For blind hole N/A ConfigurarPreço regular (excluindo IVA):50.57 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Taper Tap Series for Pipes Interrupted Thread Short Screws EX-S-IRT
Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] Tap for pipes For through hole / For blind hole N/A ConfigurarPreço regular (excluindo IVA):29.40 €～Data de envio regular:6 dias úteis
OSG
Taper Tap Series for Pipes Interrupted Thread Short Screws Long Shank EX-LT-S-IRT
Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] Tap for pipes For through hole / For blind hole N/A ConfigurarPreço regular (excluindo IVA):52.87 €～Data de envio regular:6 dias úteis
OSG
Tapered Tap Series For Pipes, For Stainless Steel Use EX-SUS-TPT
It can be used to machine female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P - Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Tap for pipes For through hole / For blind hole N/A ConfigurarPreço regular (excluindo IVA):24.17 €～Data de envio regular:6 dias úteis
OSG
Taper Tap Series for Pipes For Stainless Steel Long Shank LT-SUS-TPT
This type with a long shaft is used for machining tapered internal threads in pipes. It is suitable for difficult-to-cut materials such as stainless steel.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1/2 ～ R3/8 14 ～ 28 2.5P Carbide Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Tap for pipes For through hole / For blind hole N/A ConfigurarPreço regular (excluindo IVA):40.55 €～Data de envio regular:6 dias úteis
OSG
Taper Tap Series for Pipes Spiral Fluted for Stainless Steel SUS-SFT-TPT
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe G1/2 ～ G3/8 14 ～ 28 2.5P Vanadium High-Speed Steel Stainless Steel (JIS-SUS)[◎] Spiral Tap For blind hole N/A ConfigurarPreço regular (excluindo IVA):29.78 €～Data de envio regular:6 dias úteis
OSG
Taper Tap Series for Pipes Spiral Fluted Short Screws for Stainless Steel SUS-SFT-S-TPT
This is a short thread type used for machining tapered internal threads in pipes. It is suitable for blind holes with hard-to-cut materials such as stainless steel.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P Vanadium High-Speed Steel Stainless Steel (JIS-SUS)[◎] Tap for pipes For blind hole N/A ConfigurarPreço regular (excluindo IVA):31.28 €～Data de envio regular:6 dias úteis
OSG
Taper Tap Series for Pipes Short Screws for Stainless EX-SUS-S-TPT
This is a short thread type used for machining tapered internal threads in pipes. It is suitable for hard-to-cut materials such as stainless steel.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P Carbide Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Tap for pipes For through hole / For blind hole N/A ConfigurarPreço regular (excluindo IVA):25.37 €～Data de envio regular:6 dias úteis
OSG
Taper Tap Series for Pipes Spiral Fluted SFT-TPT
It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P High-speed steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] Tap for pipes For blind hole N/A ConfigurarPreço regular (excluindo IVA):24.17 €～Data de envio regular:6 dias úteis
OSG
Taper Tap Series for Pipes Spiral Fluted Long Shank LT-SFT-TPT
It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1/2 ～ R3/8 14 ～ 28 2.5P High-speed steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] Tap for pipes For blind hole N/A ConfigurarPreço regular (excluindo IVA):40.55 €～Data de envio regular:6 dias úteis
OSG
Taper Tap Series for Pipes Spiral Fluted Long Shank Short Screws LT-SFT-S-TPT
It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1/2 ～ R3/8 14 ～ 28 2.5P High-speed steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] Tap for pipes For blind hole N/A ConfigurarPreço regular (excluindo IVA):47.66 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Taper Tap Series for Pipes Spiral Fluted Short Screws SFT-S-TPT
It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P High-speed steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] Tap for pipes For blind hole N/A ConfigurarPreço regular (excluindo IVA):26.27 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Taper Tap Series for Pipes General Applications Short Screw S-TPT
For use when machining tapered female threads for pipes. Short Threaded Type used for tapping short-length threads, such as Elbow, Tees, etc.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P High-speed steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Tap for pipes For through hole / For blind hole N/A ConfigurarPreço regular (excluindo IVA):19.77 €～Data de envio regular:6 dias úteis
OSG
Taper Tap Series for Pipes Taper Tap OT-TPT
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1/2 ～ R3/8 14 ～ 28 2.5P Carbide Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] Tap for pipes For through hole / For blind hole N/A ConfigurarPreço regular (excluindo IVA):133.79 €～Data de envio regular:6 dias úteis