Screw-Hole-Related Tools (Coating Y/N: Available página 3)
Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.
137 itens
* Informações sobre dias de expedição, custos de expedição e preços
YAMAWA MFG
Spiral Tap for Through Holes for High Speed F-SL
Capable of 20/MIN ~ 30/MIN high-speed processing. Use of Medium or Low Speeds at 15M/MIN or Less Will Cause a Poor Shape and Poor Emission of Chips, Causing Trouble to OccurLer maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M8 ～ M10 1.25 ～ 1.5 5P High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Spiral Tap For through hole Available ConfigurarPreço regular (excluindo IVA):53.47 €～Data de envio regular:6 dias úteis
CARMEX
Carbide Solid Mill Thread Metric Screw (ISO)
Enables internal threading to be performed in a single pass.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M27 0.5 ～ 3 - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):229.39 €～Data de envio regular:6 dias úteis
CARMEX
Carbide Solid Mill Thread BSPT
For both internal and external threading.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Parallel for Pipes - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):229.39 €～Data de envio regular:6 dias úteis
CARMEX
For both inner/outer diameter threads.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Parallel for Pipes - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):229.39 €～Data de envio regular:6 dias úteis
CARMEX
Carbide Solid Mill Thread with Oil Hole ISO
Metric thread / for I.D.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M4 ～ M24 0.5 ～ 3 - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):229.39 €～Data de envio regular:6 dias úteis
CARMEX
Mill Thread G (55°) Solid Carbide with Oil Hole
Whitworth screw, I.D./O.D. common type.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Parallel for Pipes - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):273.20 €～Data de envio regular:6 dias úteis
CARMEX
Carbide Solid Mill Thread with Oil Hole BSPT
BSPT thread, I.D./O.D. common type.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Parallel for Pipes - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):273.20 €～Data de envio regular:6 dias úteis
CARMEX
Carbide Solid Mill Thread with Oil Hole UN
For unified screws and inner diameter screws.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Unified - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):273.20 €～Data de envio regular:6 dias úteis
CARMEX
Carbide Solid Mill Thread with Oil Hole NPT
NPT thread, I.D./O.D. common type.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Parallel for Pipes - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):273.20 €～Data de envio regular:6 dias úteis
CARMEX
Carbide Solid Mill Thread with Oil Hole NPS
Internal and external use inch shank.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Parallel for Pipes - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):273.20 €～Data de envio regular:6 dias úteis
CARMEX
Carbide Solid Mill Thread with Oil Hole NPSF
Inch shank for both inner and outer diameters.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Parallel for Pipes - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):273.20 €～Data de envio regular:6 dias úteis
CARMEX
Carbide Solid Mill Thread with Oil Hole PG
For both internal and external diameters.[Features]· Threading is done in 1 pass.· Spiral grooves allow reduction of cutting torque and smoother processing.· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.· Starting with blade diameter of 2.2 mm, various small diameters are available.· Can be used to cut the effective thread up to the edge of blind holes.· The same tool can be used to machine workpieces of different materials.· The finish is very clean.· The unique multilayer coating extends the life of the tool.· Cutting pressure is reduced, enabling machining of thin workpieces.· The same tool can be used for left and right threading.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Other - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):390.01 €Data de envio regular:6 dias úteis
CARMEX
MTZ Jet Mill Thread with Oil Hole ISO
For metric I.D. thread.[Features]· New type of carbide solid mill thread with oil holes inside the spiral groove.· Efficiently conveys cooling fluid to the cutting edge for smoother machining.· Especially effective with through holes.· Effective for cutting powder removal.· Also suitable for machinery that does not include an external lubricating device.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M6 ～ M20 1 ～ 2.5 - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):263.46 €～Data de envio regular:6 dias úteis
CARMEX
MTZ Jet Mill Thread with Oil Hole BSPT
For both internal and external threading.[Features]· New type of carbide solid mill thread with oil holes inside the spiral groove.· Efficiently conveys cooling fluid to the cutting edge for smoother machining.· Especially effective with through holes.· Effective for cutting powder removal.· Also suitable for machinery that does not include an external lubricating device.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Parallel for Pipes - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):305.88 €～Data de envio regular:6 dias úteis
CARMEX
MTZ Jet Mill Thread with Oil Hole BSW
For both internal and external threading.[Features]· New type of carbide solid mill thread with oil holes inside the spiral groove.· Efficiently conveys cooling fluid to the cutting edge for smoother machining.· Especially effective with through holes.· Effective for cutting powder removal.· Also suitable for machinery that does not include an external lubricating device.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Whitworth - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):263.46 €～Data de envio regular:6 dias úteis
CARMEX
Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads
For internally threaded metric screws.[Features]· For thread cutting deep, large diameter holes.· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.· Stable processing without causing chatter is possible.· Deep hole drilling can be performed with one pass.· Blade length is shorter, so cutting resistance decreases.· Able to thread long blade lengths of up to 3DLer maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter - 1 ～ 4 - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):349.53 €～Data de envio regular:6 dias úteis
CARMEX
For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw
For internally threaded unified screws.[Features]· For thread cutting deep, large diameter holes.· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.· Stable processing without causing chatter is possible.· Deep hole drilling can be performed with one pass.· Blade length is shorter, so cutting resistance decreases.· Able to thread long blade lengths of up to 3DLer maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Unified - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):349.53 €～Data de envio regular:6 dias úteis
CARMEX
Carbide Solid for Outer Diameter, Mill Thread ISO
Metric thread / for O.D. thread.[Features]· The spiral blade enables a clean finish.· Machining time is reduced by using three to six flutesLer maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter - 1 ～ 2 - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter - Available ConfigurarPreço regular (excluindo IVA):342.45 €～Data de envio regular:6 dias úteis
CARMEX
Carbide Solid for Outer Diameter, Mill Thread UN
For unified screws and outer diameter screws.[Features]· The spiral blade enables a clean finish.· Machining time is reduced by using three to six flutesLer maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Unified - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter - Available ConfigurarPreço regular (excluindo IVA):349.53 €～Data de envio regular:6 dias úteis
CARMEX
Jet Mini Mill Thread for Aircraft UNJ
It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Other - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):213.39 €～Data de envio regular:6 dias úteis
CARMEX
Jet Mini Mill Thread for Aircraft MJ
It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Other - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):217.83 €～Data de envio regular:6 dias úteis
CARMEX
Carbide Solid Mill Thread, No Finishing Flute 60°
It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide, and is effective for threading deep holes for both internal and outer diameter threads.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):208.53 €～Data de envio regular:6 dias úteis
CARMEX
DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole
With internal coolant hole, up to screw depth D1 x 2.[Features]· 3 functions with one tool. (drilling + threading + chamfering).· Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.· Drilling tools are not required.· High-performance tools shorten the cycle time and reduce the machining costs.· Can be used for both blind holes and through holes.· Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.· Thread processing with finished blade can be performed.· Both right-handed and left-handed threads can be processed with the same tool.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter - 1 ～ 2 - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):298.23 €～Data de envio regular:6 dias úteis
CARMEX
DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole
With internal coolant hole, up to screw depth D1 x 2.[Features]· 3 functions with one tool. (drilling + threading + chamfering).· Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.· Drilling tools are not required.· High-performance tools shorten the cycle time and reduce the machining costs.· Can be used for both blind holes and through holes.· Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.· Thread processing with finished blade can be performed.· Both right-handed and left-handed threads can be processed with the same tool.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Unified - - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):304.42 €Data de envio regular:6 dias úteis
CARMEX
[Features]· This new tool meets the needs of the mold industry.· High-speed cutting enabled.· Shortens the machining time.· The blade length is short, so cutting load is not applied.· Can be used to cut the effective thread up to the edge of blind holes.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter - 0.4 - Carbide Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):244.68 €Data de envio regular:6 dias úteis
CARMEX
[Features]· This new tool meets the needs of the mold industry.· High-speed cutting enabled.· Shortens the machining time.· The blade length is short, so cutting load is not applied.· Can be used to cut the effective thread up to the edge of blind holes.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Unified - - - Carbide Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):218.26 €～Data de envio regular:6 dias úteis
CARMEX
Slim Head Type Hard Cut MTH ISO
[Features]· For mini mill thread type hard cuts, we have developed an innovative tool capable of threading high hardness materials up to HRC 62 in one pass.· Shortens machining time because the same tool can be used for thread cutting and chamfering.· Compatible with relatively large diameters.· The unique coating technology demonstrates excellent resistance to abrasion and heat.· Excellent carbide grade which also handles hardened steel.· Cutting chips are reduced, providing machining stability.· The cycle time is short, increasing productivity.· Supports screw depths up to twice the machining thread diameter.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M12 0.5 ～ 1.75 - Carbide Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):266.94 €～Data de envio regular:6 dias úteis
- Volume Discount
OSG
Spiral Tap Series, Ultra-Synchronized Tap, US-AL-SFT
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M16 0.5 ～ 2 3P Vanadium High-Speed Steel Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] Spiral Tap For blind hole Available ConfigurarPreço regular (excluindo IVA):24.10 €～Data de envio regular:6 dias úteis
OSG
Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws Long Shank TIN-LT-S-IRT
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe Rc1/2 ～ Rc3/8 14 ～ 28 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎] Tap for pipes For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):64.89 €～Data de envio regular:6 dias úteisOSG
Taper Tap Series for Pipes TIN Coated Short Screws Long Shank TIN-LT-S-TPT
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe Rc1/2 ～ Rc3/8 14 ～ 28 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Tap for pipes For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):53.57 €～Data de envio regular:6 dias úteis
OSG
Taper Tap Series for Pipes TIN Coated Long Shank TIN-LT-TPT
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe Rc1/2 ～ Rc3/8 14 ～ 28 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Tap for pipes For through hole / For blind hole Available ConfigurarPreço regular (excluindo IVA):47.40 €～Data de envio regular:Item em stock: 1 dia útilAlguns artigos podem ser enviados no próprio dia
CARMEX
Now with further improved cutting performance and beautiful surface finishing.[Features]· Lineup starting from the very small diameter of M1.4 x 0.3 is available.· This new tool meets the needs of the mold industry.· High-speed cutting enabled.· Shortens the machining time.· The blade length is short, so cutting load is not applied.· Can be used to cut the effective thread up to the edge of blind holes.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter - 2 - Carbide Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] Thread cutter For blind hole Available ConfigurarPreço regular (excluindo IVA):390.43 €Data de envio regular:6 dias úteis
OSG
A Tap Series Point Tap Long Shank A-LT-POT
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2 ～ M24 0.25 ～ 3 5P Powder high-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] Point tap For through hole Available ConfigurarPreço regular (excluindo IVA):23.65 €～Data de envio regular:6 dias úteis
- Volume Discount
SANDVIK
Spiral Tap Claw Tap 300 (for Metal Screws) EX0BMJ Series
[Features]· A high-productivity tap tool.· Long tool life and excellent chip processing provide high stability.· Oxidized type with excellent welding resistance.· Taps are available for each work material, making selection easy.[Applications]· For blind hole machining.· Work materials:Stainless steel or steel.[Material]· High-Speed Steel (HSS-E)Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M5 ～ M10 0.8 ～ 1.5 2P - - Spiral Tap For blind hole Available ConfigurarPreço regular (excluindo IVA):31.33 €～Data de envio regular:6 dias úteis
- Volume Discount
SANDVIK
Spiral Tap Claw Tap 300 TiCN Coating (for Metal Screws)
The taps are available for every material, which makes selection easier.Hole type: For blind holesCoating: Surface treatment for steel.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M24 0.5 ～ 3 2P - - Spiral Tap For blind hole Available ConfigurarPreço regular (excluindo IVA):44.15 €～Data de envio regular:6 dias úteis
- Volume Discount
SANDVIK
Spiral Tap Claw Tap 300 TiN Coating (for Metal Screws / Coarse Type)
[Features]· A high-productivity tap tool.· Long tool life and excellent chip processing provide high stability.· TiN coating with high heat resistance ensures long service life even for work materials that are prone to heat buildup.· Taps are available for each work material, making selection easy.[Applications]· For blind hole machining.· Work materials: Steel.[Material]· High-Speed Steel (HSS-E)Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M4 ～ M10 0.7 ～ 1.5 2.5P - - Spiral Tap For blind hole Available ConfigurarPreço regular (excluindo IVA):48.07 €～Data de envio regular:6 dias úteis
- Volume Discount
SANDVIK
CoroTap 200 3 × DN Point Tap JIS EP0DM
[Features]·Wide selection of power strip for different work materials·For work materials with long cutting chipsLer maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M24 0.5 ～ 3 - - - Point tap - Available ConfigurarPreço regular (excluindo IVA):38.34 €～Data de envio regular:6 dias úteis
SANDVIK
Point Tap CoroTap 200, TiN Coated (For Metric Threads, Fine Type)
[Features]· A high-productivity tap tool.· The long tool life and excellent chip discharging capabilities help ensure high levels of stability.· The highly heat-resistant TiN coating ensures a long life, even for those work materials which are prone to building up heat.· There are different taps for different work materials, making selecting a tap simple[Applications]· For machining through holes.· Work material: steel, cast iron, aluminum alloy.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M8 ～ M12 1 - - - Point tap - Available ConfigurarPreço regular (excluindo IVA):76.42 €～Data de envio regular:6 dias úteis
NACHI(FUJIKOSHI)
[Features]・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2.6 0.45 5 High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] Point tap For through hole Available ConfigurarPreço regular (excluindo IVA):36.74 €Data de envio regular:6 dias úteis
- Volume Discount
YAMAWA MFG
Spiral Tap for Aluminum AL-SP 1.5P
[Features]· Eliminates scrap bite-in or blockages when cutting aluminum die casting or cast aluminum, as a tap for female thread cutting without tearing.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter - - 1.5P High-speed steel Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] Spiral Tap For blind hole Available ConfigurarPreço regular (excluindo IVA):14.39 €～Data de envio regular:6 dias úteis
- Volume Discount
YAMAWA MFG
I Series Point Tap IPO Blister Pack
[Features]· Through-hole tap for low speed machining with a drilling machine.· Use for machining iron products (SPC, SS400, etc.) that are commonly available.· Has a surface treatment (oxide treated) that is ideal for machining iron.· Machines small amounts of female threads for product prototypes.· The biting part has a twisted groove to discharge scrap in the same direction as bit movement, for use with through holes.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter - - 5P High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] Point tap For through hole Available ConfigurarPreço regular (excluindo IVA):16.03 €Data de envio regular:6 dias úteis
YAMAWA MFG
Oxidized Point Tap For High Carbon Steel HC-PO OX
[Features]· A point tap suitable for tapping high carbon steel varieties such as S55C.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M8 1.25 5P High-speed steel High Carbon Steel (C with a content over 0.45%)[○] Point tap For through hole Available ConfigurarPreço regular (excluindo IVA):25.02 €Data de envio regular:8 dias úteis
- Volume Discount
YAMAWA MFG
Long-Shank Short-Spiral Tap For Stainless Steel LS-SU-S-SP
[Features]· A long-shank short-spiral tap for stainless steel; ideal for machining pilot holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.· Can also be used for deep tapping operations.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M20 0.5 ～ 2 2.5P High-speed steel High Carbon Steel (C with a content over 0.45%)[○] / Stainless Steel (JIS-SUS)[○] Spiral Tap For blind hole Available ConfigurarPreço regular (excluindo IVA):45.02 €～Data de envio regular:8 dias úteis
- Volume Discount
YAMAWA MFG
Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO
[Features]· A long-shank point tap for machining through holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.· Can also be used for deep tapping operations.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M4 0.7 4.5P High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[○] Point tap For through hole Available ConfigurarPreço regular (excluindo IVA):46.78 €Data de envio regular:6 dias úteis
YAMAWA MFG
Long-Shank Spiral Tap For High-Speeds & Through Holes LS-F-SL
[Features]· A long-shank spiral tap for through holes. For use in high-speed machining between 15 m/min and 25 m/min.Ler maisScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M18 1.5 5.5P High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] Spiral Tap For through hole Available ConfigurarPreço regular (excluindo IVA):201.95 €Data de envio regular:8 dias úteis