Screw-Hole-Related Tools（work material：Cast Iron (FC) Page 2）

?* Information on days to ship and prices

• • Promotional pricing

  

  Hand Tap Series, for Difficult-to-Machine Material, CPM-HT

  OSG

  Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Planet Cutter Series MC-Planet Cutters PNGT

  OSG

  Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.

  Select to compare

  Configure now
  Starting from∗ ：	205.83 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Point Tap Series, V Coating, Long Shank, V-LT-POT

  OSG

  Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

  Select to compare

  Configure now
  Starting from∗ ：	27.47 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT

  OSG

  Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	40.05 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Taper Tap Series for Pipes Interrupted Threads Long Shank EX-LT-IRT

  OSG

  Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.

  Select to compare

  Configure now
  Starting from∗ ：	50.57 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Taper Tap Series for Pipes Interrupted Thread Short Screws Long Shank EX-LT-S-IRT

  OSG

  Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.

  Select to compare

  Configure now
  Starting from∗ ：	52.87 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Taper Tap Series for Pipes General Applications Short Screw S-TPT

  OSG

  For use when machining tapered female threads for pipes. Short Threaded Type used for tapping short-length threads, such as Elbow, Tees, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.77 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Taper Tap Series for Pipes Taper Tap OT-TPT

  OSG

  Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.

  Select to compare

  Configure now
  Starting from∗ ：	133.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Taper Tap Series for Pipes Taper Tap for Carbide Pipes Long Shank OT-LT-TPT

  OSG

  Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.

  Select to compare

  Configure now
  Starting from∗ ：	162.75 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Taper Tap Series for Pipes Taper Tap Short Screws for Carbide OT-S-TPT

  OSG

  Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.

  Select to compare

  Configure now
  Starting from∗ ：	133.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Taper Tap Series for Pipes for Difficult-to-Cut Materials Short Screw CPM-S-TPT

  OSG

  Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	44.76 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Taper Tap Series for Pipes Short Screws for Difficult-To-Cut Materials CPM-LT-S-TPT

  OSG

  Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  Select to compare

  Configure now
  Starting from∗ ：	60.18 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Parallel Tap Series for Pipes General Applications SPT

  OSG

  For use when machining parallel female pipe taper threads and female pipe parallel threads

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes OT-SPT

  OSG

  In conjunction with the work shape, point shape in through holes, and spiral shape in blind holes are available.

  Select to compare

  Configure now
  Starting from∗ ：	121.33 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes Long Shank OT-LT-SPT

  OSG

  In conjunction with the work shape, point shape in through holes, and spiral shape in blind holes are available.

  Select to compare

  Configure now
  Starting from∗ ：	148.20 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Taper Tap Series for American Pipes for General Application (NPSF) SPT

  OSG

  Used for machining of parallel female pipe taper threads and female pipe parallel threads

  Select to compare

  Configure now
  Starting from∗ ：	30.94 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Machining Center Tap Series, Short Type for Machining Centers, EX-S-MCT

  OSG

  With horizontal machining center, biting that is prone to chipping is easily controlled so the stable performance can be obtained.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.91 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Machining Center Tap Series, Long Shank Type for Machining Centers, EX-MCT

  OSG

  With horizontal machining center, biting that is prone to chipping is easily controlled so the stable performance can be obtained.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	33.74 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Round Die for Metric Screw

  TRUSCO NAKAYAMA

  [Features]
  · Dimensional adjustments can be made with the adjustment screw provided.
  · Can also be used to modify screw threads.
  · For round dies.
  [Applications]
  · Work materials: iron, light metals.
  · For male threading.
  · Correction of coarse screw threads.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	29.86 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  C.T.G Thick Conduit Pipe Screw Tap

  SKC

  It can be easily used by anyone, reduces precious production time to the minimum and improves work efficiency

  Select to compare

  Configure now
  Starting from∗ ：	122.18 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Pg Conduit Thread Tap (German Standard)

  SKC

  It can be easily used by anyone, reduces precious production time to the minimum and improves work efficiency

  Select to compare

  Configure now
  Starting from∗ ：	102.74 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Tap for Gas Pipes

  SKC

  [Features]
  It can be used to cut tapped holes in gas pipes.
  [Features]
  It uses high-speed steel with excellent heat resistance and resistance to thermal damage.

  Select to compare

  Configure now
  Starting from∗ ：	19.30 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP

  YAMAWA MFG

  Uses a center through hole shape that supports internally lubricating machines, and can perform both mist and dry machining. Suitable for blind holes on carbon steel and alloy steel, processing in vertical and horizontal directions.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	66.42 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP

  YAMAWA MFG

  Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole of alloy steel, carbon steel, and it is for the horizontal direction processing.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	66.42 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Titanium coating point tab PO-V (N-PO-V)

  YAMAWA MFG

  Coated point tap suitable for low carbon steel to high carbon steel machining.
  [Features]
  · Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.
  [Applications]
  · Can process both synchronously and asynchronously.
  · Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	29.89 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Hand Tap for Left-Hand Threads HT(LH)

  YAMAWA MFG

  It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	25.93 €
  	Special price
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  For Tapered Screw for Pipe (Short Screw Type) S-PT

  YAMAWA MFG

  A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes

  Select to compare

  Configure now
  Starting from∗ ：	31.92 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  For Tapered Screw for Pipe (Long Screw Type Long Shank) LS-PT

  YAMAWA MFG

  For standard pipe taps, it is used when the protruding length of the screw is insufficient.

  Select to compare

  Configure now
  Starting from∗ ：	73.50 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread Metric Screw (ISO)

  CARMEX

  Enables internal threading to be performed in a single pass.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.
  

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread Unified Screw (UN)

  CARMEX

  For internal threading.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread BSPT

  CARMEX

  For both internal and external threading.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread NPT

  CARMEX

  For both inner/outer diameter threads.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread NPTF

  CARMEX

  For both inner/outer diameter threads.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole ISO

  CARMEX

  Metric thread / for I.D.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	229.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole BSPT

  CARMEX

  BSPT thread, I.D./O.D. common type.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole UN

  CARMEX

  For unified screws and inner diameter screws.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole NPT

  CARMEX

  NPT thread, I.D./O.D. common type.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole NPS

  CARMEX

  Internal and external use inch shank.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid Mill Thread with Oil Hole NPSF

  CARMEX

  Inch shank for both inner and outer diameters.
  
  [Features]
  · Threading is done in 1 pass.
  · Spiral grooves allow reduction of cutting torque and smoother processing.
  · Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
  · Starting with blade diameter of 2.2 mm, various small diameters are available.
  · Can be used to cut the effective thread up to the edge of blind holes.
  · The same tool can be used to machine workpieces of different materials.
  · The finish is very clean.
  · The unique multilayer coating extends the life of the tool.
  · Cutting pressure is reduced, enabling machining of thin workpieces.
  · The same tool can be used for left and right threading.

  Select to compare

  Configure now
  Starting from∗ ：	273.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MTZ Jet Mill Thread with Oil Hole BSPT

  CARMEX

  For both internal and external threading.
  
  [Features]
  · New type of carbide solid mill thread with oil holes inside the spiral groove.
  · Efficiently conveys cooling fluid to the cutting edge for smoother machining.
  · Especially effective with through holes.
  · Effective for cutting powder removal.
  · Also suitable for machinery that does not include an external lubricating device.

  Select to compare

  Configure now
  Starting from∗ ：	305.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MTZ Jet Mill Thread with Oil Hole BSW

  CARMEX

  For both internal and external threading.
  
  [Features]
  · New type of carbide solid mill thread with oil holes inside the spiral groove.
  · Efficiently conveys cooling fluid to the cutting edge for smoother machining.
  · Especially effective with through holes.
  · Effective for cutting powder removal.
  · Also suitable for machinery that does not include an external lubricating device.

  Select to compare

  Configure now
  Starting from∗ ：	263.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw

  CARMEX

  For internally threaded unified screws.
  
  [Features]
  · For thread cutting deep, large diameter holes.
  · With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
  · Stable processing without causing chatter is possible.
  · Deep hole drilling can be performed with one pass.
  · Blade length is shorter, so cutting resistance decreases.
  · Able to thread long blade lengths of up to 3D

  Select to compare

  Configure now
  Starting from∗ ：	349.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid for Outer Diameter, Mill Thread ISO

  CARMEX

  Metric thread / for O.D. thread.
  
  [Features]
  · The spiral blade enables a clean finish.
  · Machining time is reduced by using three to six flutes

  Select to compare

  Configure now
  Starting from∗ ：	342.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Solid for Outer Diameter, Mill Thread UN

  CARMEX

  For unified screws and outer diameter screws.
  
  [Features]
  · The spiral blade enables a clean finish.
  · Machining time is reduced by using three to six flutes

  Select to compare

  Configure now
  Starting from∗ ：	349.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Jet Mini Mill Thread for Aircraft UNJ

  CARMEX

  It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.

  Select to compare

  Configure now
  Starting from∗ ：	213.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...