Spiral Taps（work material：Low-Carbon Steel (carbon alloy less than 0.25%)）

?* Information on days to ship and prices

• 

  SG Spiral Tap SGSP

  NACHI(FUJIKOSHI)

  [Features]
  -Demonstrates excellent performance in a variety of materials, machining equipment and a wide range of cutting conditions.

  Select to compare

  Configure now
  Starting from∗ ：	30.24 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Trapezoidal Thread Cutting Tap _TMB 29100

  WALTER PROTOTYP

  HSS-E, Cutting Blade 24 x P, 5° Left Torsion, 200 to 900 N/mm² Work Material or 28 HRC, for Long- and Short-Chipping Work Material

  Select to compare

  Configure now
  Starting from∗ ：	693.66 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  A Tap Series, Spiral Tap, A-SFT

  OSG

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spiral Tap Series, Tin Coated, TIN-SFT

  OSG

  The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.04 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Spiral Flute Tap SP (N-SP)

  YAMAWA MFG

  The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
  [Features]
  ・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
  ・ Intermittent cutting of female threads with keyway is also possible.
  ・ Capable of machining both synchronously and asynchronously.
  ・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
  ・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
  ・ The tap can easily cut.
  ・ Intermittent cutting of pilot holes with keyway is also possible.
  ・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
  [Applications]
  ・ Ideal for machining blind holes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.94 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spiral Tap (for metal screws)

  TRUSCO NAKAYAMA

  [Characteristics]
  Spiral tap for regular steel.
  [Use]
  For pilot hole machining.
  Work materials: general steel, low to medium carbon steel, alloy steel.

  Select to compare

  Configure now
  Starting from∗ ：	10.01 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Plus Series Spiral Tap +SP (N+SP)

  YAMAWA MFG

  A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
  [Features]
  · Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
  [Applications]
  · Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.48 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  A Tap Series, Spiral Tap, Long Shank A-LT-SFT

  OSG

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

  Select to compare

  Configure now
  Starting from∗ ：	24.50 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Tap For Through Holes & Trapezoidal Threads SL Tr

  YAMAWA MFG

  [Features]
  · The angle of the thread crest is 30°.
  · The symbol used for the thread is represented by "Tr."

  Select to compare

  Configure now
  Starting from∗ ：	327.22 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】

  MISUMI

  [Features]
  -Multi-use tap for all materials from general steel, heat treated steel to stainless steel
  -Efficient chip removal due to short thread form and special flute shape.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	52.15 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】

  MISUMI

  The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also available

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High-Speed Steel Spiral Tap【10 Pieces Per Package】

  MISUMI

  [Features]
  -High speed uncoated steel tap with spiral flutes
  -Suitable for machining blind holes
  -Effective for materials with continuous chips such as carbon steel and steel alloys.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	73.19 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  MT Series High-Speed Steel Spiral Tap

  MISUMI

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
  The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
  [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.81 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  G Spiral Tap for Deep Holes in Stainless Steel GSPS

  NACHI(FUJIKOSHI)

  Suited for stainless steel and materials that produce a lot of swarf.

  Select to compare

  Configure now
  Starting from∗ ：	34.33 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT

  OSG

  Allows internal threading of stainless steel with a water soluble cutting fluid.
  Tool material: Vanadium high speed steel
  Hole type: For blind holes
  Material: General steel/stainless steel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.56 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Drill Tap Series Spiral Taps with Drills V-DR-SFT

  OSG

  For Through Hole Machining Only

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	51.61 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT

  OSG

  The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	23.77 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Spiral Tap Series, V Coated, V-SFT

  OSG

  Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.33 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Spiral Tap Series, General Purpose Homogenization Treated EX-H-SFT

  OSG

  Suited for Drilling Blind Holes in Materials That Leave Coil Shaped Connected Cutting Debris Such as Carbon Steel, Alloyed Steel, and Non-Ferrous Metals

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT

  OSG

  Suited for blind thread cutting using machinery equipped with complete lead feeding mechanisms.

  Select to compare

  Configure now
  Starting from∗ ：	32.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Spiral Tap Series, for Soft Steel / Deep Holes MS-DH-SFT

  OSG

  Suitable for blind hole drilling where debris related tap jamming and internal thread biting can easily occur.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.89 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Stainless Steel-Use SU Spiral-Type

  SKC

  [Specifications]
  · Shape: Spiral tap
  · Screw type: metric
  · Work materials:Low-Carbon Steel (less than 0.25% carbon alloy) [○] /Medium carbon steel (carbon content 0.25 to 0.45%) [O]/High Carbon Steel (C content over 0.45%) [○] /Stainless Steel (SUS) [◎] /Tempered steel (25 to 35 HRC)[O]/Tool Steel (Before SKD Hardening) [○] /Cast Steel (SC)[O]/Cast Iron (FC)[O]/Ductile Cast Iron (FCD) [○] /Copper (Cu) [○] /Brass (Bs) [○] /Brass cast iron (BsC) [○] /Bronze (PB) [○] /Aluminum Rolled Material (AL) [○] /Aluminum Alloy Casting (AC, ADC) [○] /Zinc Alloy Casting (ZDC) [○]
  · Material Details: SKH

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	18.77 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spiral Tap

  SKC

  [Features]
  Can be used for tapping screw holes in stainless steel.
  [Features]
  This twist tap can evacuate chips with a helical flute.

  Select to compare

  Configure now
  Starting from∗ ：	16.70 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL

  YAMAWA MFG

  We have adopted the side through-hole shape by dry machining and ultra-high-speed machining.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	36.15 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFIHS

  YAMAWA MFG

  Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole of alloy steel, carbon steel, and it is for the vertical direction processing.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	36.15 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP

  YAMAWA MFG

  Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole of alloy steel, carbon steel, and it is for the horizontal direction processing.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	36.15 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Spiral Tap for Stainless Steel Through Holes SU+SL

  YAMAWA MFG

  Work hardening in blind hole processing of significantly gummy materials, from stainless steel and chrome steel to molybdenum steel. Processable in mid-speed range of 10 M/MIN ~ 20 M/MIN.

  Select to compare

  Configure now
  Starting from∗ ：	11.86 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Titanium Coated Through Hole Spiral Tap AU+SL

  YAMAWA MFG

  Coated Spiral Tap For Through Hole Drilling Suited For Stable Mid-Speed (10 to 25m/minute) Threading in Both Synchronous and Asynchronous Machining

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spiral Tap for Nickel Base Alloy ZEN-B

  YAMAWA MFG

  A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Coating Spiral Tap AU+ SP

  YAMAWA MFG

  Coating spiral tap with blind holes has a screw part that leaves behind complete threads and its special form sweeps away half of the screw threads afterwards + unique groove form helps maintain the discharge of scraps and has achieved in reducing friction.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.66 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Tap for Through Holes for High Speed F-SL

  YAMAWA MFG

  Capable of 20/MIN ~ 30/MIN high-speed processing. Use of Medium or Low Speeds at 15M/MIN or Less Will Cause a Poor Shape and Poor Emission of Chips, Causing Trouble to Occur

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	29.58 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Tap for High Speed F-SP

  YAMAWA MFG

  Capable of 20/MIN ~ 30/MIN high-speed processing. Use of medium or low speeds at 15M/MIN or less will cause a poor shape and poor emission of chips, causing trouble to occur.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	29.58 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Spiral Tap For High Carbon Steel HC+SP / HC-SP

  YAMAWA MFG

  It is suitable for tapping high carbon steel such as S55C.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.27 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX

  YAMAWA MFG

  Suitable for tapping high carbon steel like S55C etc. Has undergone oxidation treatment.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.36 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Short Spiral Tap for Deep Holes S-SP

  YAMAWA MFG

  Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
  [Features]
  · Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
  · Oxide treatment (OX treatment) applied to prevent welding.
  [Applications]
  · Optimal for deep thread machining to 2.5 times the nominal diameter or more.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.65 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Tap For Soft Steel / Esper E-SP

  YAMAWA MFG

  A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.18 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP

  YAMAWA MFG

  Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.71 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  N Spiral Tap NSP

  NACHI(FUJIKOSHI)

  [Features]
  It can be used for machining threaded holes.
  [Features]
  This product can be used universally as it is not treated and its spiral groove can drain chips.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.72 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SG Spiral Tap Short Chamfer SGSP-1.5P

  NACHI(FUJIKOSHI)

  [Features]
  ・ Bite shape optimized for long life

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.48 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  SG Spiral Tap Long Shank SGSPL

  NACHI(FUJIKOSHI)

  [Applications]
  ·Used when standard dimension does not have enough tool runout length

  Select to compare

  Configure now
  Starting from∗ ：	48.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Hyper Z Spiral Tap ZSP

  NACHI(FUJIKOSHI)

  [Features]
  ・ A high performance general purpose tap with long life and little variation over a wide range of machining work.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	18.74 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Tap for Through-Holes in Medium Hardness Carbon Steel MHSL

  YAMAWA MFG

  [Features]
  · Ideal for S48C to S55C forged products and tempered materials (20 to 30 HRC).
  · Realizes longer life by adopting a special coating and high-speed steel material for abrasion resistance.
  · Adopts an original groove shape that realizes stable scrap discharge at medium speeds.
  · Improves the surface roughness of female threads.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	37.30 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Long-Shank Spiral Tap For High-Speeds & Through Holes LS-F-SL

  YAMAWA MFG

  [Features]
  · A long-shank spiral tap for through holes. For use in high-speed machining between 15 m/min and 25 m/min.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	53.11 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Long-Shank Spiral Tap For High-Speeds LS-F-SP

  YAMAWA MFG

  [Features]
  · A long-shank spiral tap for use in high-speed machining between 15 m/min and 25 m/min.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	53.11 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Spiral Tap For Through Holes & Trapezoidal Threads, For Left-Handed Threads SL LH Tr

  YAMAWA MFG

  [Features]
  · The angle of the thread crest is 30°.
  · The symbol used for the thread is represented by "Tr."

  Select to compare

  Configure now
  Starting from∗ ：	391.90 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...