Registar
Condições de filtragem

Limpar tudo

  • Screw Types
  • Screw size (Nominal)
  • Pitch (P), Number of Threading(mm)
  • Chamfer threads (Lcf)
  • Tool Material Type
  • work material

Roll Taps (Screw Types: Unified)

A forming tap is a raised type screw forming tool that makes a screw mark on a metal pilot hole. It can be used for both blind holes and through holes, and there is almost no chips, so cleaning can be shortened, etc. Depending on the product, there is also a special processing that enables long-life processing without chip problems, and low torque is achieved by adopting a special shape for the tap raised part. Others have a tin coating and have excellent abrasion and chip-welding resistance. Compatible materials for processing include rolled aluminum, structural steel, copper, etc. The selection point of the forming tap is not suitable for the work material, so select one suitable for the work material used. At the same time, it is necessary to check the screw length, nominal size, pitch, number of bites, etc., depending on the place to be used before selecting.
    • Groove-Free Tap Series VP New Roll VP-NRT
      • Volume Discount

      OSG

      Groove-Free Tap Series VP New Roll VP-NRT

      Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.
      Ler mais
      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
      UnifiedNo2UN ~ No6UN32 ~ 562P ~ 4PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor blind holeAvailable
      Preço regular (excluindo IVA):
      23.13 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • Groove-Free Tap Series, Tin Coated, TIN-NRT
      • DESCONTO
      • Volume Discount

      OSG

      Groove-Free Tap Series, Tin Coated, TIN-NRT

      Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.
      Ler mais
      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
      UnifiedNo0UN ~ No12UN20 ~ 802P ~ 4PVanadium High-Speed SteelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Roll tapFor blind holeAvailable
      Preço regular (excluindo IVA):
      22.03 €
      Preço regular (excluindo IVA):
      Preço especial
      Data de envio regular:
      6 dias úteis
      Configurar
    • Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT

        OSG

        Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT

        Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.
        Ler mais
        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
        UnifiedNo2UN ~ No6UN32 ~ 562P ~ 4PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor blind holeAvailable
        Preço regular (excluindo IVA):
        31.24 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Dry Processing Roll Tap OL+RZ / OL-RZ
        • Volume Discount

        YAMAWA MFG

        Dry Processing Roll Tap OL+RZ / OL-RZ

        It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.
        Ler mais
        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
        UnifiedNo.10-32UNF ~ 1/4-20UNC-4PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Roll tapFor through holeAvailable
        Preço regular (excluindo IVA):
        35.96 €
        Data de envio regular:
        8 dias úteis
        Configurar
      • SANDVIK CoroTap 400 Forming Tap

          SANDVIK

          SANDVIK CoroTap 400 Forming Tap

          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          UnifiedUNC 1" ~ UNC 12-------
          Preço regular (excluindo IVA):
          44.03 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • Groove-Free Tap Series IT New Roll IT-NRT
          • Volume Discount

          OSG

          Groove-Free Tap Series IT New Roll IT-NRT

          Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.
          Ler mais
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          UnifiedNo2UN ~ No4UN40 ~ 562PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor blind holeAvailable
          Preço regular (excluindo IVA):
          24.73 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT
          • DESCONTO
          • Volume Discount

          OSG

          Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT

          Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.
          Ler mais
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          UnifiedNo2UN ~ No6UN32 ~ 561PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor blind holeAvailable
          Preço regular (excluindo IVA):
          24.73 €
          Preço regular (excluindo IVA):
          Preço especial
          Data de envio regular:
          6 dias úteis
          Configurar
        • High Performance Roll Tap HP+ RZ / HP-RZ
          • Volume Discount

          YAMAWA MFG

          High Performance Roll Tap HP+ RZ / HP-RZ

          It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)
          Ler mais
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          UnifiedNo.2-56UNC ~ M100.25 ~ 1.52P ~ 4PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Roll tapFor through hole / For blind holeAvailable
          Preço regular (excluindo IVA):
          24.43 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • SU Roll Tap SURZ
          • Volume Discount

          YAMAWA MFG

          SU Roll Tap SURZ

          [Features]· A special shape is adopted for the base of the tap pits that enables the female thread internal diameter shape to be controlled.· The part of the tap that sticks out (protrudes) adopts a special shape that realizes low torque.· Demonstrates effectiveness for roll tap machining of stainless steel.· Adjusting the pilot hole diameter enables the female thread internal diameter shape to be adjusted.
          Ler mais
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          UnifiedNo.4-2PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Roll tapFor blind holeAvailable
          Preço regular (excluindo IVA):
          42.08 €
          Data de envio regular:
          8 dias úteis
          Configurar