Registar

Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Condições de filtragem

Limpar tudo

  • Estoque
  • Pitch (P), Number of Threading(mm)
  • Chamfer threads (Lcf)
  • Roll Taps

    A forming tap is a raised type screw forming tool that makes a screw mark on a metal pilot hole. It can be used for both blind holes and through holes, and there is almost no chips, so cleaning can be shortened, etc. Depending on the product, there is also a special processing that enables long-life processing without chip problems, and low torque is achieved by adopting a special shape for the tap raised part. Others have a tin coating and have excellent abrasion and chip-welding resistance. Compatible materials for processing include rolled aluminum, structural steel, copper, etc. The selection point of the forming tap is not suitable for the work material, so select one suitable for the work material used. At the same time, it is necessary to check the screw length, nominal size, pitch, number of bites, etc., depending on the place to be used before selecting.
      • Hand tap set
        • Volume Discount

        REX TOOLS

        Hand tap set

        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
        -M3 ~ Mf32-------
        Preço (excluindo IVA) a partir de:
        12.85 €
        Data de envio regular:
        3 dias úteis
        Configurar
      • Groove-Free Tap Series X Performer S-XPF
        • DESCONTO
        • Volume Discount

        OSG

        Groove-Free Tap Series X Performer S-XPF

        When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts * M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.
        Ler mais
        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
        MeterM1 ~ M450.2 ~ 4.52P ~ 4PPowder high-speed steel / Vanadium High-Speed SteelLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor through hole / For blind holeAvailable
        Preço (excluindo IVA) a partir de:
        19.66 €
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Groove-Free Tap Series, Tin Coated, TIN-NRT
        • DESCONTO
        • Volume Discount

        OSG

        Groove-Free Tap Series, Tin Coated, TIN-NRT

        Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.
        Ler mais
        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
        Meter / UnifiedNo0UN ~ M200.25 ~ 802P ~ 4PVanadium High-Speed SteelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Roll tapFor blind holeAvailable
        Preço (excluindo IVA) a partir de:
        17.52 €
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • S-XPF 6GX, HSSE forming tap for through & blind holes, Metric

          OSG

          S-XPF 6GX, HSSE forming tap for through & blind holes, Metric

          For general steels, stainless steels and aluminum - For 6G internal thread tolerance
          Ler mais
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          ---------
          Preço (excluindo IVA) a partir de:
          56.00 €
          Data de envio regular:
          4 dias úteis
          Configurar
        • S-XPF-LH, HSSE forming tap for through & blind holes, Metric

            OSG

            S-XPF-LH, HSSE forming tap for through & blind holes, Metric

            For general steels, stainless steels and aluminum - For left-hand threads
            Ler mais
            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
            ---------
            Preço (excluindo IVA) a partir de:
            69.20 €
            Data de envio regular:
            4 dias úteis
            Configurar
          • A-XPF, Powder metal forming tap for through & blind holes, Metric

              OSG

              A-XPF, Powder metal forming tap for through & blind holes, Metric

              High speed tapping in general steels, aluminum, stainless steels - Powder metal for long tool life
              Ler mais
              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
              ---------
              Preço (excluindo IVA) a partir de:
              56.30 €
              Data de envio regular:
              4 dias úteis
              Configurar
            • TiN Coated High-Speed Steel Roll Tap

                MISUMI

                TiN Coated High-Speed Steel Roll Tap【5 unidades】

                [Features] -Used for tapping that produces no chips-Suitable for a wide range of materials, from general steel to non-ferrous alloys-Excellent abrasion resistance and chip weld resistance due to TiN coating.
                Ler mais
                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                MeterM3 ~ M100.5 ~ 1.52 P ~ 4 PVanadium High-Speed SteelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Roll tapFor through hole / For blind holeAvailable
                Preço (excluindo IVA) a partir de:
                53.99 €
                Data de envio regular:
                5 dias úteis
                Configurar
              • Tapping head
                • Volume Discount

                WERA

                Tapping head

                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                MeterM3 ~ M10-------
                Preço (excluindo IVA) a partir de:
                7.75 €
                Data de envio regular:
                4 dias úteis
                Configurar
              • Treaded tool holder
                • Volume Discount

                REX TOOLS

                Treaded tool holder

                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                -M3 - M10 ~ M5 - M12-------
                Preço (excluindo IVA) a partir de:
                9.08 €
                Data de envio regular:
                3 dias úteis
                Configurar
              • S-XPF, HSSE forming tap for through & blind holes, Metric

                  OSG

                  S-XPF, HSSE forming tap for through & blind holes, Metric

                  For general steels, stainless steels and aluminum
                  Ler mais
                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                  ---------
                  Preço (excluindo IVA) a partir de:
                  48.00 €
                  Data de envio regular:
                  4 dias úteis
                  Configurar
                • V-NRT, HSSE forming tap for through & blind holes, Metric

                    OSG

                    V-NRT, HSSE forming tap for through & blind holes, Metric

                    For general steels, stainless steels and aluminum
                    Ler mais
                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                    ---------
                    Preço (excluindo IVA) a partir de:
                    38.30 €
                    Data de envio regular:
                    4 dias úteis
                    Configurar
                  • CNC tapping head set
                    • Volume Discount

                    REX TOOLS

                    CNC tapping head set

                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                    ---------
                    Preço (excluindo IVA) a partir de:
                    85.57 €
                    Data de envio regular:
                    3 dias úteis
                    Configurar
                  • Thread gauge
                    • Volume Discount

                    REX TOOLS

                    Thread gauge

                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                    ---------
                    Preço (excluindo IVA) a partir de:
                    8.03 €
                    Data de envio regular:
                    3 dias úteis
                    Configurar
                  • Groove-Free Tap Series IT New Roll IT-NRT
                    • Volume Discount

                    OSG

                    Groove-Free Tap Series IT New Roll IT-NRT

                    Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.
                    Ler mais
                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                    Meter / UnifiedM1 ~ No4UN0.25 ~ 562PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor blind holeAvailable
                    Preço (excluindo IVA) a partir de:
                    19.82 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • Groove-Free Tap Series VP New Roll VP-NRT
                    • Volume Discount

                    OSG

                    Groove-Free Tap Series VP New Roll VP-NRT

                    Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.
                    Ler mais
                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                    Meter / UnifiedM1 ~ M120.25 ~ 562P ~ 4PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor blind holeAvailable
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT
                    • DESCONTO
                    • Volume Discount

                    OSG

                    Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT

                    Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.
                    Ler mais
                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                    Meter / UnifiedM1 ~ No6UN0.25 ~ 561PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor blind holeAvailable
                    Preço (excluindo IVA) a partir de:
                    19.89 €
                    Preço especial
                    Data de envio regular:
                    Item em stock: 1 dia útil
                    Alguns artigos podem ser enviados no próprio dia
                    Configurar
                  • Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT

                      OSG

                      Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT

                      Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.
                      Ler mais
                      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                      Meter / UnifiedM1 ~ M120.25 ~ 562P ~ 4PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor blind holeAvailable
                      Preço (excluindo IVA) a partir de:
                      24.43 €
                      Data de envio regular:
                      6 dias úteis
                      Configurar
                    • Groove-Free Tap Series For Non-Ferrous Alloy B-HRT
                      • Volume Discount

                      OSG

                      Groove-Free Tap Series For Non-Ferrous Alloy B-HRT

                      Suitable for nonferrous alloys such as aluminum, magnesium, zinc, copper and it's alloys.
                      Ler mais
                      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                      MeterM4 ~ M60.7 ~ 12.5P ~ 4PHigh-speed steelCopper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Roll tapFor blind holeN/A
                      Preço (excluindo IVA) a partir de:
                      9.91 €
                      Data de envio regular:
                      6 dias úteis
                      Configurar
                    • Titanium Coating Roll Tap R+V / R-V
                      • Volume Discount

                      YAMAWA MFG

                      Titanium Coating Roll Tap R+V / R-V

                      A coating roll tap suitable for threading steel and nonferrous materials.
                      Ler mais
                      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                      MeterM3 ~ M60.5 ~ 12P ~ 4PHigh-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Roll tapFor through hole / For blind holeAvailable
                      Preço (excluindo IVA) a partir de:
                      27.26 €
                      Data de envio regular:
                      6 dias úteis
                      Configurar
                    • High Performance Roll Tap HP+ RZ / HP-RZ

                        YAMAWA MFG

                        High Performance Roll Tap HP+ RZ / HP-RZ

                        It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)
                        Ler mais
                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                        UnifiedM81.252P ~ 4PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Roll tapFor through hole / For blind holeAvailable
                        Preço (excluindo IVA) a partir de:
                        47.42 €
                        Data de envio regular:
                        6 dias úteis
                        Configurar
                      • S-OIL-XPF, HSSE forming tap for through & blind holes, UNF

                          OSG

                          S-OIL-XPF, HSSE forming tap for through & blind holes, UNF

                          For general steels, stainless steels and aluminum - Side through coolant
                          Ler mais
                          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                          ---------
                          Preço (excluindo IVA) a partir de:
                          106.80 €
                          Data de envio regular:
                          4 dias úteis
                          Configurar
                        • S-OIL-XPF 6GX, HSSE forming tap for through & blind holes, Metric

                            OSG

                            S-OIL-XPF 6GX, HSSE forming tap for through & blind holes, Metric

                            For general steels, stainless steels and aluminum - For 6G internal thread tolerance - Side through coolant
                            Ler mais
                            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                            ---------
                            Preço (excluindo IVA) a partir de:
                            83.30 €
                            Data de envio regular:
                            4 dias úteis
                            Configurar
                          • S-XPF-GL, HSSE forming tap for through & blind holes, G (BSP)

                              OSG

                              S-XPF-GL, HSSE forming tap for through & blind holes, G (BSP)

                              For general steels, stainless steels and aluminum - Without oil grooves for higher rigidity
                              Ler mais
                              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                              ---------
                              Preço (excluindo IVA) a partir de:
                              75.10 €
                              Data de envio regular:
                              4 dias úteis
                              Configurar
                            • V-NRT FORM D, HSSE forming tap for through holes, Metric Fine

                                OSG

                                V-NRT FORM D, HSSE forming tap for through holes, Metric Fine

                                For general steels, stainless steels and aluminum - Chamfer Form D
                                Ler mais
                                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                ---------
                                Preço (excluindo IVA) a partir de:
                                57.30 €
                                Data de envio regular:
                                4 dias úteis
                                Configurar
                              • Tapping combo head
                                • Volume Discount

                                WERA

                                Tapping combo head

                                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                MeterM3 ~ M10-------
                                Preço (excluindo IVA) a partir de:
                                13.28 €
                                Data de envio regular:
                                4 dias úteis
                                Configurar
                              • Die metric
                                • Volume Discount

                                REX TOOLS

                                Die metric

                                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                -M2 ~ M12-------
                                Preço (excluindo IVA) a partir de:
                                4.53 €
                                Data de envio regular:
                                3 dias úteis
                                Configurar
                              • Hand tap, Finish tap
                                • Volume Discount

                                RUKO

                                Hand tap, Finish tap

                                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                MeterM2--High-speed steel-Hand Tap--
                                Preço (excluindo IVA) a partir de:
                                5.32 €
                                Data de envio regular:
                                3 dias úteis
                                Configurar
                              • Insert Screw Tap Series, New Roll Tap for Non-Irons, Long Shank, HL-LT-B-NRT

                                  OSG

                                  Insert Screw Tap Series, New Roll Tap for Non-Irons, Long Shank, HL-LT-B-NRT

                                  When cutting aluminum (cast, rolled and forged) and other light alloys, this is suitable as a countermeasure for obstruction from metal shavings, or when the objective is extending the tap usage life.
                                  Ler mais
                                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                  MeterM81.252PHigh-speed steelAluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor through hole / For blind holeAvailable
                                  Preço (excluindo IVA) a partir de:
                                  42.36 €
                                  Data de envio regular:
                                  6 dias úteis
                                  Configurar
                                • Groove-Free Tap Series TIN Coated Long Shank TIN-LT-NRT

                                    OSG

                                    Groove-Free Tap Series TIN Coated Long Shank TIN-LT-NRT

                                    Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.
                                    Ler mais
                                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                    MeterM3 ~ M120.5 ~ 1.752P ~ 4PVanadium High-Speed SteelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Roll tapFor through hole / For blind holeAvailable
                                    Preço (excluindo IVA) a partir de:
                                    24.43 €
                                    Data de envio regular:
                                    6 dias úteis
                                    Configurar
                                  • Groove-Free Tap Series UM New Roll UM-NRT
                                    • Volume Discount

                                    OSG

                                    Groove-Free Tap Series UM New Roll UM-NRT

                                    Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.
                                    Ler mais
                                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                    MiniatureS0.5 ~ S0.9.02 ~ 0.2252PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless Steel (JIS-SUS)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor blind holeAvailable
                                    Preço (excluindo IVA) a partir de:
                                    31.64 €
                                    Data de envio regular:
                                    6 dias úteis
                                    Configurar
                                  • Groove-Free Tap Series V Coating For Thin Sheet V-SS-NRT
                                    • Volume Discount

                                    OSG

                                    Groove-Free Tap Series V Coating For Thin Sheet V-SS-NRT

                                    Well suited for thread cutting of soft steel sheets with a pull strength of 700N or below. Reduces burrs, whiskers, and tears.
                                    Ler mais
                                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                    MeterM618PVanadium High-Speed SteelLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○]Roll tapFor through holeAvailable
                                    Preço (excluindo IVA) a partir de:
                                    22.33 €
                                    Data de envio regular:
                                    6 dias úteis
                                    Configurar
                                  • Groove-Free Tap Series For Aluminium High Speed Synchronized Tap HS-AL-NRT
                                    • Volume Discount

                                    OSG

                                    Groove-Free Tap Series For Aluminium High Speed Synchronized Tap HS-AL-NRT

                                    High precision female screw processing is done on aluminum and aluminum alloys without producing any chips.
                                    Ler mais
                                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                    MeterM40.72PVanadium High-Speed SteelAluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor through hole / For blind holeN/A
                                    Preço (excluindo IVA) a partir de:
                                    13.52 €
                                    Data de envio regular:
                                    6 dias úteis
                                    Configurar
                                  • Groove-Free Tap Series Ultra Synchronized Tap US-AL-NRT
                                    • Volume Discount

                                    OSG

                                    Groove-Free Tap Series Ultra Synchronized Tap US-AL-NRT

                                    Through the use of plastic deformation, high speed, high precision female screw processing is done on aluminum and aluminum alloys without producing any chips
                                    Ler mais
                                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                    MeterM30.52PVanadium High-Speed SteelAluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor through hole / For blind holeAvailable
                                    Preço (excluindo IVA) a partir de:
                                    19.52 €
                                    Data de envio regular:
                                    6 dias úteis
                                    Configurar
                                  • Groove-Free Tap Series for Steel HRT
                                    • Volume Discount

                                    OSG

                                    Groove-Free Tap Series for Steel HRT

                                    Suited for high stretch materials such as low-carbon steel, low-carbon alloyed steel and stainless steel due to plasticity deformation formed screws. Particularly Suited For Blind Holes Due to Lack of Debris
                                    Ler mais
                                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                    MeterM1.4 ~ M3.50.3 ~ 0.62.5PHigh-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○]Roll tapFor blind holeN/A
                                    Preço (excluindo IVA) a partir de:
                                    8.41 €
                                    Data de envio regular:
                                    6 dias úteis
                                    Configurar
                                  • Groove-Free Tap Series for Steel NRT
                                    • Volume Discount

                                    OSG

                                    Groove-Free Tap Series for Steel NRT

                                    Suited for high stretch materials such as low-carbon steel, low-carbon alloyed steel and stainless steel due to plasticity deformation formed screws. Particularly Suited For Blind Holes Due to Lack of Debris
                                    Ler mais
                                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                    MeterM1.6 ~ M100.35 ~ 1.252P ~ 4PHigh-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○]Roll tapFor through hole / For blind holeN/A
                                    Preço (excluindo IVA) a partir de:
                                    10.08 €
                                    Data de envio regular:
                                    6 dias úteis
                                    Configurar
                                  • Groove-Free Tap Series Carbide New Roll Tap OT-NRT

                                      OSG

                                      Groove-Free Tap Series Carbide New Roll Tap OT-NRT

                                      Suitable for massive tapping of aluminum alloy/magnesium alloy/copper alloy by high precision automatic machine.
                                      Ler mais
                                      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                      MeterM3 ~ M120.5 ~ 1.752PCarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor through hole / For blind holeN/A
                                      Preço (excluindo IVA) a partir de:
                                      85.84 €
                                      Data de envio regular:
                                      6 dias úteis
                                      Configurar
                                    • Groove-Free Tap Series Carbide New Roll Tap Long Shank OT-LT-NRT

                                        OSG

                                        Groove-Free Tap Series Carbide New Roll Tap Long Shank OT-LT-NRT

                                        Suitable for massive tapping of aluminum alloy/magnesium alloy/copper alloy by high precision automatic machine.
                                        Ler mais
                                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                        MeterM3 ~ M120.5 ~ 1.752PCarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor through hole / For blind holeN/A
                                        Preço (excluindo IVA) a partir de:
                                        117.30 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar
                                      • Groove-Free Tap Series For Copper CU-NRT
                                        • Volume Discount

                                        OSG

                                        Groove-Free Tap Series For Copper CU-NRT

                                        Treated With CRN Coating Which Shows Excellent Friction Resistance and Anti-Sticking Properties Against Copper and Use of HSSE as Material Allows Long Lived Machining on Copper
                                        Ler mais
                                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                        MeterM40.72PVanadium High-Speed SteelStainless Steel (JIS-SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○]Roll tapFor through hole / For blind holeAvailable
                                        Preço (excluindo IVA) a partir de:
                                        18.92 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar
                                      • Groove-Free Tap Series For Non-Ferrous Alloy B-NRT
                                        • Volume Discount

                                        OSG

                                        Groove-Free Tap Series For Non-Ferrous Alloy B-NRT

                                        Suitable for nonferrous alloys such as aluminum, magnesium, zinc, copper and it's alloys.
                                        Ler mais
                                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                        MeterM8 ~ M201.25 ~ 1.54PHigh-speed steelCopper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor blind holeAvailable
                                        Preço (excluindo IVA) a partir de:
                                        16.42 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar
                                      • Rolling Tap 1017
                                        • Volume Discount

                                        GUHRING

                                        Rolling Tap 1017

                                        [Features]· Rolling tap suitable for steel with ductility or non-ferrous metal such as aluminum or copper.
                                        Ler mais
                                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                        MeterM3 ~ M60.5 ~ 1-High-speed steel-Roll tap-Available
                                        Preço (excluindo IVA) a partir de:
                                        31.25 €
                                        Data de envio regular:
                                        8 dias úteis
                                        Configurar
                                      • Short Chamfer Torqueless Roll Taps SC-TL-RZ

                                          YAMAWA MFG

                                          Short Chamfer Torqueless Roll Taps SC-TL-RZ

                                          The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.
                                          Ler mais
                                          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                          MeterM611PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Roll tapFor blind holeAvailable
                                          Preço (excluindo IVA) a partir de:
                                          38.20 €
                                          Data de envio regular:
                                          6 dias úteis
                                          Configurar
                                        • Dry Processing Roll Tap OL+RZ / OL-RZ

                                            YAMAWA MFG

                                            Dry Processing Roll Tap OL+RZ / OL-RZ

                                            It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.
                                            Ler mais
                                            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                            MeterM50.84PPowder high-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Roll tapFor through holeAvailable
                                            Preço (excluindo IVA) a partir de:
                                            31.79 €
                                            Data de envio regular:
                                            6 dias úteis
                                            Configurar
                                          • Groove-Free Tap Series X Performer Long Shank LT-S-XPF
                                            • Volume Discount

                                            OSG

                                            Groove-Free Tap Series X Performer Long Shank LT-S-XPF

                                            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                            MeterM3 ~ M120.5 ~ 1.75-Vanadium High-Speed SteelLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Roll tapFor through hole / For blind holeAvailable
                                            Preço (excluindo IVA) a partir de:
                                            25.83 €
                                            Data de envio regular:
                                            6 dias úteis
                                            Configurar
                                          • Roll Tap Coro Tap 400 TiN Coated (for Blind and Through Holes, Non-Fluted)

                                              SANDVIK

                                              Roll Tap Coro Tap 400 TiN Coated (for Blind and Through Holes, Non-Fluted)

                                              [Features]· A high-productivity tap tool.· Long tool life and excellent chip processing provide high stability.· Rolling tap that does not emit chips.· Taps are available for each work material, making selection easy.[Applications]· For blind hole or through hole machining.· Work materials: Steel, stainless steel, aluminum alloy, nickel alloy.
                                              Ler mais
                                              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                              MeterM8 ~ M121.25 ~ 1.75---Roll tap--
                                              Preço (excluindo IVA) a partir de:
                                              78.10 €
                                              Data de envio regular:
                                              12 dias úteis
                                              Configurar
                                            • S-LT-XPF, HSSE forming tap for through & blind holes, Metric

                                                OSG

                                                S-LT-XPF, HSSE forming tap for through & blind holes, Metric

                                                For general steels, stainless steels and aluminum - Long reach threading
                                                Ler mais
                                                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                                ---------
                                                Preço (excluindo IVA) a partir de:
                                                94.20 €
                                                Data de envio regular:
                                                4 dias úteis
                                                Configurar

                                              Produtos recentemente visualizados