OSG
Taper Tap Series for Pipes General Applications TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | High-speed steel | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Tap for pipes | For through hole / For blind hole | N/A |
OSG
Taper Tap Series for Pipes Spiral Fluted SFT-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | High-speed steel | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Tap for pipes | For blind hole | N/A |
OSG
Taper Tap Series for Pipes Taper Tap OT-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Carbide | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Tap for pipes | For through hole / For blind hole | N/A |
OSG
Taper Tap Series for Pipes for Difficult-to-Cut Materials CPM-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Powder high-speed steel | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Tap for pipes | For through hole / For blind hole | N/A |
OSG
Taper Tap Series for Pipes Interrupted Thread (PT) EX-IRT-PT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Vanadium High-Speed Steel | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] | Tap for pipes | For through hole / For blind hole | N/A |
OSG
Taper Tap Series for Pipes TIN Coated TIN-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Vanadium High-Speed Steel | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Tap for pipes | For through hole / For blind hole | Available |
OSG
Taper Tap Series for Pipes TIN Coating Interrupted Thread TIN-IRT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Carbide | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎] | Tap for pipes | For through hole / For blind hole | Available |
OSG
Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws TIN-S-IRT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Carbide | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎] | Tap for pipes | For through hole / For blind hole | Available |
OSG
Taper Tap Series for Pipes TIN Coated Short Screws TIN-S-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Vanadium High-Speed Steel | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Tap for pipes | For through hole / For blind hole | Available |
OSG
Taper Tap Series for Pipes V Coating Powder HSS (For High Hardness Steel) V-XPM-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 3P | Powder high-speed steel | Quenched and tempered steel (45 to 55 HRC)[◎] | Tap for pipes | For through hole / For blind hole | Available |
OSG
Taper Tap Series for Pipes V Coated Carbide (For High Hardness Steel) VX-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 3P | Carbide | High Hardness Steel (50-60 HRC)[◎] | Tap for pipes | For through hole / For blind hole | Available |
OSG
Taper Tap Series for Pipes For Aluminum V-AL-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Vanadium High-Speed Steel | Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Tap for pipes | For through hole / For blind hole | Available |
OSG
Taper Tap Series for Pipes Interrupted Threads Long Shank EX-LT-IRT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Carbide | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] | Tap for pipes | For through hole / For blind hole | N/A |
OSG
Taper Tap Series for Pipes Interrupted Thread Short Screws EX-S-IRT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Carbide | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] | Tap for pipes | For through hole / For blind hole | N/A |
OSG
Taper Tap Series for Pipes Interrupted Thread Short Screws Long Shank EX-LT-S-IRT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Carbide | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] | Tap for pipes | For through hole / For blind hole | N/A |
OSG
Tapered Tap Series For Pipes, For Stainless Steel Use EX-SUS-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | - | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Tap for pipes | For through hole / For blind hole | N/A |
OSG
Taper Tap Series for Pipes For Stainless Steel Long Shank LT-SUS-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Carbide | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Tap for pipes | For through hole / For blind hole | N/A |
OSG
Taper Tap Series for Pipes Spiral Fluted Short Screws for Stainless Steel SUS-SFT-S-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Vanadium High-Speed Steel | Stainless Steel (JIS-SUS)[◎] | Tap for pipes | For blind hole | N/A |
OSG
Taper Tap Series for Pipes Short Screws for Stainless EX-SUS-S-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Carbide | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Tap for pipes | For through hole / For blind hole | N/A |
OSG
Taper Tap Series for Pipes Short Screws for Stainless Steel Long Shank LT-SUS-S-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Carbide | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Tap for pipes | For through hole / For blind hole | N/A |
OSG
Taper Tap Series for Pipes Spiral Fluted Long Shank LT-SFT-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | High-speed steel | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Tap for pipes | For blind hole | N/A |
OSG
Taper Tap Series for Pipes Spiral Fluted Long Shank Short Screws LT-SFT-S-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | High-speed steel | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Tap for pipes | For blind hole | N/A |
OSG
Taper Tap Series for Pipes Spiral Fluted Short Screws SFT-S-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | High-speed steel | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Tap for pipes | For blind hole | N/A |
OSG
Taper Tap Series for Pipes General Applications Short Screw S-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | High-speed steel | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Tap for pipes | For through hole / For blind hole | N/A |
OSG
Taper Tap Series for Pipes Taper Tap for Carbide Pipes Long Shank OT-LT-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Carbide | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Tap for pipes | For through hole / For blind hole | N/A |
OSG
Taper Tap Series for Pipes Taper Tap Short Screws for Carbide OT-S-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Carbide | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Tap for pipes | For through hole / For blind hole | N/A |
OSG
Taper Tap Series for Pipes for Difficult-to-Cut Materials Short Screw CPM-S-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Powder high-speed steel | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Tap for pipes | For through hole / For blind hole | N/A |
OSG
Taper Tap Series for Pipes Short Screws for Difficult-To-Cut Materials CPM-LT-S-TPT
Screw Types | Screw size (Nominal) | Pitch (P), Number of Threading(mm) | Chamfer threads (Lcf) | Tool Material Type | work material | Tap Type | Hole type | Coating Y/N |
---|---|---|---|---|---|---|---|---|
Taper for Pipe | R1/2 | 14 | 2.5P | Powder high-speed steel | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Tap for pipes | For through hole / For blind hole | N/A |