Thread Cutters（Tap Type：Thread cutter）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Carbide Solid Mill Thread, No Finishing Flute 60°

CARMEX

It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide, and is effective for threading deep holes for both internal and outer diameter threads.

Select to compare

Configure now
Starting from^∗ ：	208.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread G (55°)

CARMEX

Threading can be performed for both internal and external threads with a single pass.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

MISUMI

The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	222.23 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Planet Cutter Series NC-Planet Cutters WX-PNC

OSG

Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	158.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC

OSG

The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	101.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread Metric Screw (ISO)

CARMEX

Enables internal threading to be performed in a single pass.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread BSPT

CARMEX

For both internal and external threading.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Tapered End Mill

CARMEX

[Features]
· Carbide solid tapered end mills are used for pre-process machining when thread milling the screws of tapered shapes such as pipe screws.
· Increases the service life of solid carbide type mill threads or mill thread tips.
· Equal and proper load will be applied to the cutting edge of the mill thread cutter.
· By applying taper shape pre-processing, the machining time of the mill thread is shortened

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	119.87 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Jet Mini Mill Thread for Aircraft MJ

CARMEX

It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.

Select to compare

Configure now
Starting from^∗ ：	217.83 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters

CARMEX

For both internal and external threading

[Features]
· Ultrafine particle carbide and new type three-layer PVD coating

Select to compare

Configure now
Starting from^∗ ：	208.52 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws

CARMEX

Metric thread / for I.D. thread

[Features]
· Ultra-fine particle carbide with an advanced three layer PVD blue coating

Select to compare

Configure now
Starting from^∗ ：	212.85 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

MISUMI

Threading cutters that enable the high-speed stable processing are available at special prices

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	110.87 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

MISUMI

[Features]
-Carbide thread cutter for stable high speed machining
-Can be used for both blind holes and through holes
-DLC coating with excellent abrasion resistance and chip weld resistance makes it ideal for non-steel metals such as aluminium and copper.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	113.79 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

MISUMI

[Features]
-Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible
-Reduced cutting load due to short flute length (3 webs)
-Enables effective thread cutting right into the corners of blind holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	181.78 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

TS Coated Carbide Threading Cutter, for Internal Metric Threads

MISUMI

[Features]
--Tungsten carbide thread cutter for stable high speed machining
-Can be used for both blind holes and through holes
-
-It is coated with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	181.83 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Planet Cutter Series MC-Planet Cutters PNGT

OSG

Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.

Select to compare

Configure now
Starting from^∗ ：	205.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series Super Planet DR-PNAC

OSG

A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving Productivity

Select to compare

Configure now
Starting from^∗ ：	295.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC

OSG

A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving Productivity

Select to compare

Configure now
Starting from^∗ ：	324.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC

OSG

By spraying machining oil compound from the lubrication hole, allows effective removal of cutting debris.

Select to compare

Configure now
Starting from^∗ ：	165.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MMTS Micro Threading Tool

NS TOOL

Helical threaded with a smaller tool diameter than that of pilot holes, so removal and re-processing is possible when broken

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	100.28 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 3737

GUHRING

[Features]
· Threading is performed with helical cutting.
· If the pitch is the same, one unit can process threads with different diameters.
· Both right-handed and left-handed female threads can be machined.

Select to compare

Configure now
Starting from^∗ ：	254.77 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 4133

GUHRING

Select to compare

Configure now
Starting from^∗ ：	196.80 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

MC - Helical Cutter MC-HLC

YAMAWA MFG

A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.

Select to compare

Configure now
Starting from^∗ ：	253.22 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Carbide MC - Helical Cutter MC-CSLC

YAMAWA MFG

Select to compare

Configure now
Starting from^∗ ：	295.34 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Carbide Solid Mill Thread Unified Screw (UN)

CARMEX

For internal threading.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread NPT

CARMEX

For both inner/outer diameter threads.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread NPTF

CARMEX

Select to compare

Configure now
Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole ISO

CARMEX

Metric thread / for I.D.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Mill Thread G (55°) Solid Carbide with Oil Hole

CARMEX

Whitworth screw, I.D./O.D. common type.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole BSPT

CARMEX

BSPT thread, I.D./O.D. common type.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole UN

CARMEX

For unified screws and inner diameter screws.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole NPT

CARMEX

NPT thread, I.D./O.D. common type.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole NPS

CARMEX

Internal and external use inch shank.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole NPSF

CARMEX

Inch shank for both inner and outer diameters.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole PG

CARMEX

For both internal and external diameters.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	390.01 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MTZ Jet Mill Thread with Oil Hole ISO

CARMEX

For metric I.D. thread.

[Features]
· New type of carbide solid mill thread with oil holes inside the spiral groove.
· Efficiently conveys cooling fluid to the cutting edge for smoother machining.
· Especially effective with through holes.
· Effective for cutting powder removal.
· Also suitable for machinery that does not include an external lubricating device.

Select to compare

Configure now
Starting from^∗ ：	263.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MTZ Jet Mill Thread with Oil Hole BSPT

CARMEX

For both internal and external threading.

[Features]
· New type of carbide solid mill thread with oil holes inside the spiral groove.
· Efficiently conveys cooling fluid to the cutting edge for smoother machining.
· Especially effective with through holes.
· Effective for cutting powder removal.
· Also suitable for machinery that does not include an external lubricating device.

Select to compare

Configure now
Starting from^∗ ：	305.88 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MTZ Jet Mill Thread with Oil Hole BSW

CARMEX

Select to compare

Configure now
Starting from^∗ ：	263.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads

CARMEX

For internally threaded metric screws.

[Features]
· For thread cutting deep, large diameter holes.
· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
· Stable processing without causing chatter is possible.
· Deep hole drilling can be performed with one pass.
· Blade length is shorter, so cutting resistance decreases.
· Able to thread long blade lengths of up to 3D

Select to compare

Configure now
Starting from^∗ ：	349.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw

CARMEX

For internally threaded unified screws.

[Features]
· For thread cutting deep, large diameter holes.
· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
· Stable processing without causing chatter is possible.
· Deep hole drilling can be performed with one pass.
· Blade length is shorter, so cutting resistance decreases.
· Able to thread long blade lengths of up to 3D

Select to compare

Configure now
Starting from^∗ ：	349.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid for Outer Diameter, Mill Thread ISO

CARMEX

Metric thread / for O.D. thread.

[Features]
· The spiral blade enables a clean finish.
· Machining time is reduced by using three to six flutes

Select to compare

Configure now
Starting from^∗ ：	342.45 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid for Outer Diameter, Mill Thread UN

CARMEX

For unified screws and outer diameter screws.

[Features]
· The spiral blade enables a clean finish.
· Machining time is reduced by using three to six flutes

Select to compare

Configure now
Starting from^∗ ：	349.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Mini Mill Thread G55°

CARMEX

For both G (55°) inner and outer diameter thread (MT7).

[Features]
· Mini mill thread is a carbide solid mill thread developed for threading the inside diameter of very small holes.
· Achieves phenomenal performance due to its highly precise blade shape and multiple-layer titanium aluminum nitride coated high performance ultrafine particle carbide (MT7).
· Small diameter threading from M1 x 0.25 (pilot hole diameter φ0.75 mm) is possible.
· Because high-speed cutting can be performed, machining time is shortened.
· The blade length is short (3 ridges), so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.
· Enables thread cutting of difficult-to-cut and high hardness materials.

Select to compare

Configure now
Starting from^∗ ：	211.31 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Jet Mini Mill Thread for Aircraft UNJ

CARMEX

Select to compare

Configure now
Starting from^∗ ：	213.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole

CARMEX

With internal coolant hole, up to screw depth D1 x 2.

[Features]
· 3 functions with one tool. (drilling + threading + chamfering).
· Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.
· Drilling tools are not required.
· High-performance tools shorten the cycle time and reduce the machining costs.
· Can be used for both blind holes and through holes.
· Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.
· Thread processing with finished blade can be performed.
· Both right-handed and left-handed threads can be processed with the same tool.

Select to compare

Configure now
Starting from^∗ ：	298.23 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	CARMEX	CARMEX	MISUMI	OSG	OSG	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	NS TOOL	GUHRING	GUHRING	YAMAWA MFG	YAMAWA MFG	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX
Product Series	Carbide Solid Mill Thread, No Finishing Flute 60°	Carbide Solid Mill Thread G (55°)	TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads	Planet Cutter Series NC-Planet Cutters WX-PNC	Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC	Carbide Solid Mill Thread Metric Screw (ISO)	Carbide Solid Mill Thread BSPT	Carbide Solid Tapered End Mill	Jet Mini Mill Thread for Aircraft MJ	MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters	MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws	TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads	DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model	TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads	TS Coated Carbide Threading Cutter, for Internal Metric Threads	Planet Cutter Series MC-Planet Cutters PNGT	Planet Cutter Series Super Planet DR-PNAC	Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC	Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC	MMTS Micro Threading Tool	Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 3737	Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 4133	MC - Helical Cutter MC-HLC	Carbide MC - Helical Cutter MC-CSLC	Carbide Solid Mill Thread Unified Screw (UN)	Carbide Solid Mill Thread NPT	Carbide Solid Mill Thread NPTF	Carbide Solid Mill Thread with Oil Hole ISO	Mill Thread G (55°) Solid Carbide with Oil Hole	Carbide Solid Mill Thread with Oil Hole BSPT	Carbide Solid Mill Thread with Oil Hole UN	Carbide Solid Mill Thread with Oil Hole NPT	Carbide Solid Mill Thread with Oil Hole NPS	Carbide Solid Mill Thread with Oil Hole NPSF	Carbide Solid Mill Thread with Oil Hole PG	MTZ Jet Mill Thread with Oil Hole ISO	MTZ Jet Mill Thread with Oil Hole BSPT	MTZ Jet Mill Thread with Oil Hole BSW	Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads	For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw	Carbide Solid for Outer Diameter, Mill Thread ISO	Carbide Solid for Outer Diameter, Mill Thread UN	Mini Mill Thread G55°	Jet Mini Mill Thread for Aircraft UNJ	DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole
Starting from^∗	208.53 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	222.23 € *Unit price with basic configuration Volume Discount	158.30 € *Unit price with basic configuration Volume Discount	101.50 € *Unit price with basic configuration Volume Discount	229.39 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	119.87 € *Unit price with basic configuration Volume Discount	217.83 € *Unit price with basic configuration	208.52 € *Unit price with basic configuration	212.85 € *Unit price with basic configuration	110.87 € *Unit price with basic configuration Volume Discount	113.79 € *Unit price with basic configuration Volume Discount	181.78 € *Unit price with basic configuration Volume Discount	181.83 € *Unit price with basic configuration Volume Discount	205.83 € *Unit price with basic configuration	295.75 € *Unit price with basic configuration	324.46 € *Unit price with basic configuration	165.90 € *Unit price with basic configuration	100.28 € *Unit price with basic configuration Volume Discount	254.77 € *Unit price with basic configuration	196.80 € *Unit price with basic configuration	253.22 € *Unit price with basic configuration	295.34 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	390.01 € *Unit price with basic configuration	263.46 € *Unit price with basic configuration	305.88 € *Unit price with basic configuration	263.46 € *Unit price with basic configuration	349.53 € *Unit price with basic configuration	349.53 € *Unit price with basic configuration	342.45 € *Unit price with basic configuration	349.53 € *Unit price with basic configuration	211.31 € *Unit price with basic configuration	213.39 € *Unit price with basic configuration	298.23 € *Unit price with basic configuration
Min. Shipping Days	5 Days	5 Days	7 Days	6 Days	6 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	7 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	8 Days	8 Days	8 Days	8 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days
Screw Types	Meter	Parallel for Pipes	Meter	Meter / Unified / Taper for Pipe	Meter / Unified	Meter	Parallel for Pipes	Taper for Pipe	Other	Meter	Meter	Meter	Meter	Meter	Meter	Meter / Taper for Pipe / Parallel for Pipes	Meter	Meter	Meter	Other	Meter	Meter	Meter / Taper for Pipe / Parallel for Pipes	Meter / Taper for Pipe / Parallel for Pipes	Unified	Parallel for Pipes	Parallel for Pipes	Meter	Parallel for Pipes	Parallel for Pipes	Unified	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Other	Meter	Parallel for Pipes	Whitworth	Meter	Unified	Meter	Unified	Whitworth	Other	Meter
Screw size (Nominal)	-	-	M2 ～ M12	-	-	M3 ～ M27	-	-	-	-	M1 ～ M3	M3 ～ M20	M3 ～ M16	M1.4 ～ M20	M3 ～ M12	-	M6 ～ M12	M6 ～ M12	-	S0.1 ～ S1.4	M6 ～ M20	M6 ～ M20	1015 ～ 32506N300M	06510X28R ～ 200505N300M	-	-	-	M4 ～ M24	-	-	-	-	-	-	-	M6 ～ M20	-	-	-	-	-	-	-	-	-
Pitch (P), Number of Threading(mm)	-	11 ～ 28	0.4 ～ 1.75	1 ～ 28	0.25 ～ 32	0.5 ～ 3	-	-	-	-	0.25 ～ 0.5	0.5 ～ 2.5	0.5 ～ 2	0.3 ～ 2.5	0.5 ～ 1.75	1 ～ 19	1 ～ 1.75	1 ～ 1.75	0.5 ～ 3	0.025 ～ 0.3	1 ～ 2.5	1 ～ 2.5	-	0.5 ～ 3	-	-	-	0.5 ～ 3	-	-	-	-	-	-	-	1 ～ 2.5	-	-	1 ～ 4	-	1 ～ 2	-	-	-	1 ～ 2
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]
Tap Type	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter
Hole type	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	-	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	-	For through hole / For blind hole	For through hole / For blind hole	-	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	-	-	For blind hole	For blind hole	For through hole / For blind hole
Coating Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	Nitriding Treatment	Nitriding Treatment	TiAlN	TiAlN	For High Hardness (Silicon Group) / Other	TiAlN	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	TiAlN	DLC	TiAlN	For High Hardness (Silicon Group)	TiN	TiAlN	TiAlN	TiAlN	TiAlN	TiCN	TiCN	TiN	TiAlN	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment
Overall Length (L)(mm)	58 ～ 101	58 ～ 105	58 ～ 73	60 ～ 120	40	58 ～ 120	58 ～ 105	58 ～ 84	58 ～ 64	39 ～ 58	39	57 ～ 115	57 ～ 92	39 ～ 105	48 ～ 74	80 ～ 210	62 ～ 89	62 ～ 89	60 ～ 120	45	54 ～ 102	54 ～ 102	70 ～ 200	50 ～ 140	58 ～ 105	58 ～ 105	58 ～ 105	58 ～ 120	64 ～ 105	64 ～ 105	64 ～ 105	64 ～ 73	63 ～ 76	63 ～ 76	84	58 ～ 101	64 ～ 101	58 ～ 73	73 ～ 160	73 ～ 105	73 ～ 84	73 ～ 84	64 ～ 105	58 ～ 73	64 ～ 84

Filter by:

Screw Types
- Meter
- Unified
- Whitworth
- Taper for Pipe
- Parallel for Pipes
- Other
Clear

Screw size (Nominal)
NO.0-80UNF

S0.1

NO.1-72UNF

NO.1-64UNC

NO.10-32UNF

NO.10-24UNC

NO.12-28UNF

NO.12-24UNC

S0.2

NO.2-64UNF

NO.2-56UNC

S0.3

NO.3-56UNF

NO.3-48UNC

S0.4

NO.4-48UNF

NO.4-40UNC

S0.5

NO.5-44UNF

NO.5-40UNC

S0.6

NO.6-40UNF

S0.8

NO.8-36UNF

NO.8-32UNC

M1

S1

UNC 1

G1"-3"

G1/2 5/8

G1/4

UNC 1/4

UNF 1/4

1/4-28UNF

1/4-20UNC

G1/8

M1.2

S1.2

M1.4

S1.4

M1.6

M2

UNC 2

UNF 2

M2.2

M2.5

M3

UNC 3

UNF 3

G3/8

M3 - M10

M3 - M12

3.5

M3.5

4

M4

UNC 4

UNF 4

M5

G5/8 3/4

M5 - M12

UNC 5/16

UNF 5/16

6

M6

MF6

UNC 6

UNF 6

7 execution M3 - M12

7.5

M8

MF8

UNC 8

9

M10

MF10

UNC 10

UNF 10

M12

MF12

Mf12

M12 x 1.5

M14

MF14

M16

MF16

Mf16

M16 x 1.5

M18

M20

MF20

Mf20

M20 x 1.5

M22

M24

MF24

Mf25

M25 x 1.5

M27

MF28

Mf32

1015

1020N100M

1020N150M

06510X28R

10154

12204

12254N100M

12254N150M

12254N200M

16304N100M

16304N150M

16304N200M

16304N250M

20305

20505N100M

20505N150M

20505N200M

20505N300M

20505N350M

25506N100M

25506N150M

25506N200M

25506N300M

25506N350M

32506

32506N150M

32506N200M

32506N300M

035083N075M

035083N080M

040123N100M

060163N050M

060163N100M

060163N125M

065103X28G

075203N125M

075203N150M

080153X19G

080153X19R

080203N050M

080203N100M

090244N125M

090244N175M

100254N050M

100254N100M

100254N150M

100254N200M

120204X14G

120204X14R

120304N100M

120304N150M

120304N200M

160264X11G

160264X11R

160404N150M

160404N200M

160404N250M

200305X11G

200305X11R

200505N150M

200505N200M

200505N300M
Clear

Pitch (P), Number of Threading(mm)
0.025

0.05

0.08

0.1

0.125

0.15

0.2

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

1

1.1

1.25

1.4

1.5

1.75

1.9

2

2.5

2.8

3

3.5

4

11

11.5

12

13

14

16

18

19

20

24

27

28

32
Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Carbide
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Hand Tap
- Thread cutter
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
33

35

36

38

39

40

41

44

45

48

50

51

54

56

57

58

59

60

62

63

64

65

68

69

70

72

73

74

75

76

78

79

80

83

84

85

89

90

92

95

100

101

102

104

105

110

115

120

121

125

140

145

150

160

165

175

200

210
Drawing

Clear

Brand

- MISUMI (5)
- Cost Efficient Products ()
- CARMEX (35)
- OSG (6)
- YAMAWA MFG (3)
- GUHRING (2)
- NS TOOL (2)
- WERA (0)
- FEIN (0)
- BERNSTEIN AG (0)
- RUKO (0)
- STAHLWILLE (0)
- GEDORE (0)
- SANDVIK (0)
- HAZET (0)
- REX TOOLS (0)
Clear