Registar

Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Condições de filtragem

Limpar tudo

  • Estoque
  • Tool Diameter(mm)
    [1.8-5/0.1mm unidades]
    [0.3-15.99/0.01mm unidades]
    [0.3-15.995/0.005mm unidades]
  • Groove Length(mm)
    [0.5-48/0.5mm unidades]
    [3-10/1mm unidades]
  • Groove Shape
  • Tip diameter
  • Large End Diameter
  • radius R
    • Carbide Straight Reamer
      • Volume Discount

      OSG

      Carbide Straight Reamer

      The cutting material used is carbide.-Provide sufficient cutting fluid.-Use a chuck with high precision.-It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
      Ler mais
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.3 ~ 13.05End Mill Shank / Straight ShankGeneral Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-N/AStraightN/A--
      Preço (excluindo IVA) a partir de:
      35.50 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • Solid Long Hand Reamer CSLHR
      • Volume Discount

      EIKOSHA

      Solid Long Hand Reamer CSLHR

      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.4 ~ 10.05Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]20 ~ 150N/AStraightN/A--
      Preço (excluindo IVA) a partir de:
      80.61 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • Solid Reamer CSR
      • Volume Discount

      EIKOSHA

      Solid Reamer CSR

      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.4 ~ 20.05Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]4 ~ 80N/AStraightN/A--
      Preço (excluindo IVA) a partir de:
      31.73 €
      Data de envio regular:
      6 dias úteis
      Configurar
    • Solid Reamer for Blind Holes HR500S 1675

        GUHRING

        Solid Reamer for Blind Holes HR500S 1675

        [Features]· High-quality hole finish-machining can be performed at ultra high speed.· The applicable range of processing materials is wide, the processing cost can be reduced, and high reliability is provided.· Lubricates internally using the center-through hole, helping achieve reliable extraction of cutting chips.
        Ler mais
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        2.97 ~ 12.03--12 ~ 19Available----
        Preço (excluindo IVA) a partir de:
        272.64 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Carbide Spiral Reamer, High-Precision Tolerance Model
        • Volume Discount

        MISUMI

        Carbide Spiral Reamer, High-Precision Tolerance Model

        [Features] -Achieves high-precision hole machining by reducing the tolerance width of the cutting diameter-High-speed cutting greatly improves efficiency compared to high-speed steel reamers-The long service life makes it possible to maintain high-precision machining for a long time.-Even higher cutting speed is possible by using spiral grooves.
        Ler mais
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        1 ~ 13End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]10 ~ 44N/ASpiralN/A--
        Preço (excluindo IVA) a partir de:
        40.30 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • Carbide µ (Mu) Reamer
        • DESCONTO
        • Volume Discount

        FPTOOLS

        Carbide µ (Mu) Reamer

        [Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.
        Ler mais
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        0.5 ~ 10.009End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]5 ~ 40N/AStraightN/A--
        Preço (excluindo IVA) a partir de:
        65.44 €
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Carbide Reamer G Series
        • DESCONTO
        • Volume Discount

        FPTOOLS

        Carbide Reamer G Series

        [Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
        Ler mais
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        0.2 ~ 12.1End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]3 ~ 45N/AStraightN/A--
        Preço (excluindo IVA) a partir de:
        25.27 €
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Adjustable Reamer
        • DESCONTO

        FPTOOLS

        Adjustable Reamer

        Blade diameter dimensions can be adjusted to achieve the functionality of dozens of solid reamers with just the one reamer.
        Ler mais
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        6.35~7.15 ~ 30.25~34.25-General Steel[○] / Alloy Steel[○]35 ~ 98--N/A--
        Preço (excluindo IVA) a partir de:
        91.18 €
        Preço especial
        Data de envio regular:
        Item em stock: 1 dia útil
        Alguns artigos podem ser enviados no próprio dia
        Configurar
      • Straight Reamer with Carbide Bottom Blade
        • Volume Discount

        MISUMI

        Straight Reamer with Carbide Bottom Blade

        [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole.
        Ler mais
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        3 ~ 10.01End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]27 ~ 40N/AStraightAvailable--
        Preço (excluindo IVA) a partir de:
        52.82 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • Carbide Helical Reamer
        • Volume Discount

        MISUMI

        Carbide Helical Reamer

        [Features] -High-speed milling significantly improves efficiency compared to high-speed steel reamers-High-speed milling is possible by using spiral grooves.
        Ler mais
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        3 ~ 10End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]25 ~ 40N/ASpiralN/A--
        Preço (excluindo IVA) a partir de:
        80.25 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • Carbide Pilot Hole Correction Boring Bit

          MISUMI

          Carbide Pilot Hole Correction Boring Bit

          In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding. By using it before finishing the reamer, the bend of the hole can be modified.
          Ler mais
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          1.8 ~ 5End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-N/AStraightN/A--
          Data de envio regular:
          8 dias úteis
          Configurar
        • Carbide Boring End Mill
          • Volume Discount

          MISUMI

          Carbide Boring End Mill

          [Features] -Unique cutting edge shape enables drilling of various materials such as stainless steel and aluminium alloys-Drilling is possible under cutting conditions of 60 m/min or more-Compatible with various applications such as. Hole machining and high precision It can be used for finishing holes as it achieves the same dimensional accuracy and surface roughness as drilling and reaming-Ideal for drilling precision threads with a high percentage of thread engagement-It is able to correct variations in the diameter of the pilot hole, allows for improved hole position accuracy
          Ler mais
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          2 ~ 10End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]12 ~ 52AvailableStraightN/A--
          Preço (excluindo IVA) a partir de:
          106.63 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • Carbide Reamer H Series
          • DESCONTO
          • Volume Discount

          FPTOOLS

          Carbide Reamer H Series

          [Features]· Cutting speed can be increased by 50% compared to carbide straight blade types.· Ideal for deep drilling: Long neck section.· Excellent anterior chip discharge: 30° torsion, left
          Ler mais
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          1 ~ 15.5End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎]8 ~ 45N/ASpiralN/A--
          Preço (excluindo IVA) a partir de:
          110.00 €
          Preço especial
          Data de envio regular:
          Item em stock: 1 dia útil
          Alguns artigos podem ser enviados no próprio dia
          Configurar
        • Carbide Reamer R Series
          • Volume Discount

          FPTOOLS

          Carbide Reamer R Series

          Cutting capacity for quenched hardness around 60 HRC, thanks to purple coating for high-hardness steel and right-lead blade shape. Shank diameter is endmill shank type.
          Ler mais
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          1 ~ 12.1End Mill ShankQuenched and tempered steel[◎]15 ~ 65AvailableSpiralN/A--
          Preço (excluindo IVA) a partir de:
          74.23 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • BCCR Carbide Chucking Reamer (Straight Shank)
          • Volume Discount

          OKAZAKI SEIKO

          BCCR Carbide Chucking Reamer (Straight Shank)

          Tip brazing type, straight shank specification. The neck is thinner than the blade diameter to enable deep hole drilling.
          Ler mais
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          12.5 ~ 30Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/AStraightN/A--
          Preço (excluindo IVA) a partir de:
          126.32 €
          Data de envio regular:
          10 dias úteis
          Configurar
        • CCR Carbide Chucking Reamer
          • Volume Discount

          OKAZAKI SEIKO

          CCR Carbide Chucking Reamer

          A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.
          Ler mais
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          3 ~ 12Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/AStraightN/A--
          Preço (excluindo IVA) a partir de:
          36.45 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Solid Reamer for Through Holes HR500D 1686

            GUHRING

            Solid Reamer for Through Holes HR500D 1686

            [Features]· High-quality hole finish-machining can be performed at ultra high speed.· The applicable range of processing materials is wide, the processing cost can be reduced, and high reliability is provided.· Coolant is supplied through the shank, helping achieve reliable extraction of cutting chips.
            Ler mais
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            3 ~ 20--12 ~ 25Available----
            Preço (excluindo IVA) a partir de:
            229.66 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • Carbide Oil Hole Spiral Tapered Reamer CSPOTR

              EIKOSHA

              Carbide Oil Hole Spiral Tapered Reamer CSPOTR

              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              -End Mill ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]40 ~ 55N/ASpiralN/A-12.2 ~ 30.2
              Preço (excluindo IVA) a partir de:
              306.66 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • Carbide High Helical Reamer CHHR

                EIKOSHA

                Carbide High Helical Reamer CHHR

                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                2 ~ 14Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎]10 ~ 29N/AHelicalN/A--
                Preço (excluindo IVA) a partir de:
                94.11 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Coro Reamer 835 for Cylindrical Holes Coro Reamer 835 - Multi-Edged Design Straight Flute for Blind Holes

                  SANDVIK

                  Coro Reamer 835 for Cylindrical Holes Coro Reamer 835 - Multi-Edged Design Straight Flute for Blind Holes

                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  -Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○]-AvailableStraightN/A--
                  Preço (excluindo IVA) a partir de:
                  260.37 €
                  Data de envio regular:
                  6 dias úteis
                  Configurar
                • SANDVIK CoroReamer 830 Solid Carbide Head for Reaming

                    SANDVIK

                    SANDVIK CoroReamer 830 Solid Carbide Head for Reaming

                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                    10 ~ 30--------
                    Preço (excluindo IVA) a partir de:
                    558.31 €
                    Data de envio regular:
                    5 dias úteis
                    Configurar
                  • SANDVIK CoroReamer 435 Solid Carbide Reamer

                      SANDVIK

                      SANDVIK CoroReamer 435 Solid Carbide Reamer

                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      4 ~ 20-General Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Alloy Steel[○]12 ~ 25-----
                      Preço (excluindo IVA) a partir de:
                      149.54 €
                      Data de envio regular:
                      5 dias úteis
                      Configurar
                    • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model

                        MISUMI

                        Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model

                        [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole.
                        Ler mais
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        0.3 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
                        Data de envio regular:
                        7 dias úteis
                        Configurar
                      • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model

                          MISUMI

                          Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model

                          [Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes
                          Ler mais
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          0.3 ~ 5.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightAvailable--
                          Data de envio regular:
                          8 dias úteis
                          Configurar
                        • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model

                            MISUMI

                            Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model

                            [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole
                            Ler mais
                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            0.4 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
                            Data de envio regular:
                            7 dias úteis
                            Configurar
                          • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model

                              MISUMI

                              Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model

                              [Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes.
                              Ler mais
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              0.4 ~ 5.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightAvailable--
                              Data de envio regular:
                              8 dias úteis
                              Configurar
                            • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model

                                MISUMI

                                Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model

                                [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole
                                Ler mais
                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                0.4 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
                                Data de envio regular:
                                7 dias úteis
                                Configurar
                              • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model

                                  MISUMI

                                  Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model

                                  [Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes
                                  Ler mais
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  0.4 ~ 5.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightAvailable--
                                  Data de envio regular:
                                  8 dias úteis
                                  Configurar
                                • Spiral Reamer with Carbide Bottom Blade
                                  • Volume Discount

                                  MISUMI

                                  Spiral Reamer with Carbide Bottom Blade

                                  [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Even higher cutting speed is possible by using spiral grooves
                                  Ler mais
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  3 ~ 10.01End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]20 ~ 30N/ASpiralAvailable--
                                  Preço (excluindo IVA) a partir de:
                                  86.03 €
                                  Data de envio regular:
                                  5 dias úteis
                                  Configurar
                                • Carbide Straight Reamer, Regular Model

                                    MISUMI

                                    Carbide Straight Reamer, Regular Model

                                    [Features] -Standard carbide reamer with custom dimensions-Custom dimensions can be specified in units of 0.01 mm for the cutting diameter and 0.5 mm for the flute length
                                    Ler mais
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    0.3 ~ 15.99End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightN/A--
                                    Data de envio regular:
                                    7 dias úteis
                                    Configurar
                                  • Carbide Straight Reamer, Long Model

                                      MISUMI

                                      Carbide Straight Reamer, Long Model

                                      [Features] -Standard carbide reamer with custom dimensions-Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length-Long design enables reaming of deep areas.
                                      Ler mais
                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      0.3 ~ 5.99End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightN/A--
                                      Data de envio regular:
                                      8 dias úteis
                                      Configurar
                                    • Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
                                      • Volume Discount

                                      MISUMI

                                      Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining

                                      [Features] -Carbide material enables high-speed cutting, which greatly improves efficiency compared to high-speed steel reamers-TS-coated products are ideal for machining high-hardness steels with 40 HRC or more (TSC-XHR).
                                      Ler mais
                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      1 ~ 10End Mill ShankGeneral Steel[○/◎] / Quenched and tempered steel[○/◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]12 ~ 40Available ~ N/AStraightN/A--
                                      Preço (excluindo IVA) a partir de:
                                      37.11 €
                                      Data de envio regular:
                                      5 dias úteis
                                      Configurar
                                    • Carbide Precision Straight Reamer

                                        MISUMI

                                        Carbide Precision Straight Reamer

                                        It is capable of finishing holes with clean surface roughness compared to the normal reamer.
                                        Ler mais
                                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                        0.5 ~ 5.9End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 10N/AStraightN/A--
                                        Data de envio regular:
                                        8 dias úteis
                                        Configurar
                                      • Carbide Step Reamer, Custom Dimensions / Long Shank Type

                                          MISUMI

                                          Carbide Step Reamer, Custom Dimensions / Long Shank Type

                                          [Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
                                          Ler mais
                                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                          -End Mill ShankGeneral Steel[◎] / Aluminum[◎]-N/AStraight---
                                          Data de envio regular:
                                          7 dias úteis
                                          Configurar
                                        • Carbide Step Reamer, Custom Dimensions Type

                                            MISUMI

                                            Carbide Step Reamer, Custom Dimensions Type

                                            [Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
                                            Ler mais
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            -End Mill ShankGeneral Steel[◎] / Aluminum[◎]-N/AStraight---
                                            Data de envio regular:
                                            7 dias úteis
                                            Configurar
                                          • Carbide Reamer for Stainless Steel CSUSR-A
                                            • Volume Discount

                                            EIKOSHA

                                            Carbide Reamer for Stainless Steel CSUSR-A

                                            Shape Suitable for Hard-to-Cut Materials including Stainless Steel, Heat-Resistant Coated, Wear-Resistant Material, Right Helix
                                            Ler mais
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            0.5 ~ 12.05End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[○]6 ~ 45AvailableSpiralN/A--
                                            Preço (excluindo IVA) a partir de:
                                            85.75 €
                                            Data de envio regular:
                                            6 dias úteis
                                            Configurar
                                          • Coated Solid Reamer CSR-C
                                            • DESCONTO
                                            • Volume Discount

                                            EIKOSHA

                                            Coated Solid Reamer CSR-C

                                            The Usage of the TICN647 Coating Prevents Deposition, and Improves Finished Surface Roughness
                                            Ler mais
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            0.8 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎]12 ~ 45AvailableStraightN/A--
                                            Preço (excluindo IVA) a partir de:
                                            65.29 €
                                            Preço especial
                                            Data de envio regular:
                                            Item em stock: 1 dia útil
                                            Alguns artigos podem ser enviados no próprio dia
                                            Configurar
                                          • Coated Solid Spiral Reamer CSPR-C
                                            • DESCONTO
                                            • Volume Discount

                                            EIKOSHA

                                            Coated Solid Spiral Reamer CSPR-C

                                            The Usage of the TICN1297 Coating Prevents Deposition, and Improves Finished Surface Roughness
                                            Ler mais
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            0.8 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎]15 ~ 45AvailableSpiralN/A--
                                            Preço (excluindo IVA) a partir de:
                                            69.45 €
                                            Preço especial
                                            Data de envio regular:
                                            Item em stock: 1 dia útil
                                            Alguns artigos podem ser enviados no próprio dia
                                            Configurar
                                          • DLC Carbide Solid Reamer for Aluminum CSR-DLC

                                              EIKOSHA

                                              DLC Carbide Solid Reamer for Aluminum CSR-DLC

                                              Adopts low friction coefficient DLC coating for aluminum/nonferrous metal
                                              Ler mais
                                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                              0.5 ~ 12.05End Mill ShankCast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○]6 ~ 45AvailableStraightN/A--
                                              Preço (excluindo IVA) a partir de:
                                              95.24 €
                                              Data de envio regular:
                                              6 dias úteis
                                              Configurar
                                            • Reamer with Carbide Oil Hole for Stop Holes CSOER

                                                EIKOSHA

                                                Reamer with Carbide Oil Hole for Stop Holes CSOER

                                                Bottom blade with blind hole reamer Oil hole right twist
                                                Ler mais
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                2.95 ~ 16Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎]16 ~ 30N/ASpiralAvailable--
                                                Preço (excluindo IVA) a partir de:
                                                120.41 €
                                                Data de envio regular:
                                                6 dias úteis
                                                Configurar
                                              • Carbide Solid Pivot Reamer CSRR-3
                                                • Volume Discount

                                                EIKOSHA

                                                Carbide Solid Pivot Reamer CSRR-3

                                                Small Diameter Use Reamer φ193 Shank
                                                Ler mais
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                0.2 ~ 3Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎]3 ~ 25N/AStraightN/A--
                                                Preço (excluindo IVA) a partir de:
                                                49.74 €
                                                Data de envio regular:
                                                6 dias úteis
                                                Configurar
                                              • Solid Medium Reamer CSRM
                                                • Volume Discount

                                                EIKOSHA

                                                Solid Medium Reamer CSRM

                                                For General-Purpose Wear resistant Carbide K Type Adopted
                                                Ler mais
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                0.8 ~ 12.05Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]15 ~ 80N/AStraightN/A--
                                                Preço (excluindo IVA) a partir de:
                                                65.16 €
                                                Data de envio regular:
                                                6 dias úteis
                                                Configurar
                                              • Carbide Chucking Reamer CSCRS
                                                • Volume Discount

                                                EIKOSHA

                                                Carbide Chucking Reamer CSCRS

                                                For General-Purpose Short blade, long shank, for deep hole finishing
                                                Ler mais
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                1 ~ 30Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]15 ~ 75N/AStraightN/A--
                                                Preço (excluindo IVA) a partir de:
                                                83.18 €
                                                Data de envio regular:
                                                6 dias úteis
                                                Configurar
                                              • Solid Taper Pin Reamer CSTPR
                                                • Volume Discount

                                                EIKOSHA

                                                Solid Taper Pin Reamer CSTPR

                                                For 1/50 Taper Pins
                                                Ler mais
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                -Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]28 ~ 194N/AStraightN/A1 ~ 131.46 ~ 16.74
                                                Preço (excluindo IVA) a partir de:
                                                62.64 €
                                                Data de envio regular:
                                                6 dias úteis
                                                Configurar
                                              • Solid Pin Gate Reamer CSPGR

                                                  EIKOSHA

                                                  Solid Pin Gate Reamer CSPGR

                                                  Sprue Hole Drilling Reamer for Pin-Gate Mold
                                                  Ler mais
                                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                  -Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]25 ~ 60N/ASpiralN/A-1.42 ~ 9.01
                                                  Preço (excluindo IVA) a partir de:
                                                  107.23 €
                                                  Data de envio regular:
                                                  6 dias úteis
                                                  Configurar