Chamfer, V-Grooves（Application：Centering (Positioning)）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 13 Days or Less 15 Days or Less

?* Information on days to ship and prices

TS coated carbide chamfer, V grooving end mill, 2-flute

MISUMI

[Features]
-Ideal for chamfers and V-grooves
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.

Volume Discount

TS
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	71.59 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Toglon Sharp SP 60° Carbide

IWATA TOOL

Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

Select to compare

Configure now
Starting from^∗ ：	94.31 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Leading Drills, TIN-NC-LDS

OSG

TiN Coating Makes Possible Higher Speed and Longer Life than NC-LDS

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Spiral Chamfering Cutter (for Steel / Aluminum Alloy) CA-SCC

OSG

By adopting of sharp high helix, clean working surface with less burr can be obtained.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	81.19 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°

MAKOTOLOY

[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.

Select to compare

Configure now
Starting from^∗ ：	93.69 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

MISUMI

The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

Volume Discount

TS
SUS
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	74.67 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

MISUMI

[Features]
・Popular 3-flute type for helix angle chambering with high feed rate.
・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
・It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	41.90 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Leading Drills, NC-LDS

OSG

Available tip angles are 90° (45° chamfer), 120°, and 130° (EX GOLD drill centering for slope / curved surfaces).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.20 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Center Chamfer Mill

FUKUDA

A single product capable of five types of machining: center positioning, chamfering, side surface machining, drilling, and V-grooving.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	54.38 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Toglon Sharp SP 90° Carbide

IWATA TOOL

[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.

Select to compare

Configure now
Starting from^∗ ：	79.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Toglon Sharp SP 60° ALD Coating

IWATA TOOL

[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

Select to compare

Configure now
Starting from^∗ ：	111.05 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

7 LEADERS

[Features]
· 90° Carbide 2-Flute Chamfering V-Grooving End Mill
· Use for V-grooving, horizontal chamfering, centering, hole chamfering.
· Nanoparticle Multilayer Coating
· Excellent lubricity and abrasion resistance.
· Suitable for a wide range of work materials from general steel to aluminum.

Select to compare

Configure now
Starting from^∗ ：	47.28 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°

MAKOTOLOY

Select to compare

Configure now
Starting from^∗ ：	125.71 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

MISUMI

Ideal for the Deep Chamfering of Workpieces

Volume Discount

TS
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	48.89 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TS coated carbide chamfering end mill, 2-flute / 15° spiral

MISUMI

[Features]
-The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool
-The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	42.10 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TS coated carbide chamfering end mill, 2-flute / short model

MISUMI

[Features]
-Ideal for chamfering. Can also be used as a deburring tool
-Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting
-Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above
-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	38.81 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TS coated carbide chamfering end mill, 3-flute / short model

MISUMI

[Features]
-Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).
-Peripheral grooves allow bevel, contour and spiral cutting
-The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type
-With helix angle on peripheral flutes
-Can also be used as a deburring tool
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	46.59 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

MISUMI

Capable of everything from positioning to chamfering in a single shot

Volume Discount

Non-Coated
Aluminum
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	40.79 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

MISUMI

The sharp helix blade achieves the clean machined surface with less burr

Volume Discount

Non-Coated
Aluminum
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	72.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

MISUMI

The chamfer angle can be selected from 60, 90 and 120°according to the machining style

Volume Discount

TiCN
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	57.90 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Chamfering End Mill, 2-Flute / Short

MISUMI

Chamfering end mill with the angle that can be freely selected in 1° increments

Non-Coated
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type

MISUMI

[Features]
・Popular chamfering product with helix angle.
・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	37.62 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

MISUMI

[Features]
・Machining from positioning to chamfering with a single tool.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	42.61 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Chamfer End Mill 2-Flute

MISUMI

[Features]
・Recommended for chamfering general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	32.62 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

MISUMI

[Features]
・Recommended for deep section chamfering of general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
・The long type is ideal for deep cavity milling.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	43.97 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type

MISUMI

[Features]
・The popular high hardness steel chamfer end mill is even more affordable.
・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)
・High-efficiency machining is possible by adopting a 6-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	42.86 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Leading Drills, VP-LDS

OSG

V coating enables longer lasting life than TIN-NC-LDS

Select to compare

Configure now
Starting from^∗ ：	17.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Leading Drills, FX-LS-LDS

OSG

90° of tip angle with FX coating, carbide leading drill with long shank. Ideal for chamfering deep parts.

Select to compare

Configure now
Starting from^∗ ：	295.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Leading Drills, FX-LDS

OSG

90° of tip angle with FX coating, carbide leading drill. It enables high speed and long life.

Select to compare

Configure now
Starting from^∗ ：	357.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Spiral Chamfering Cutter FX-SCC

OSG

By adopting of sharp high helix, clean working surface with less burr can be obtained.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	88.29 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC

OSG

Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.

Select to compare

Configure now
Starting from^∗ ：	84.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminum) CA-LS-SCC

OSG

Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	87.63 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute, Chamfering Cutter (Negative Type) HSCT-N

OSG

End mill for negative chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	73.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute, Chamfering Cutter (Positive Type) HSCT-P

OSG

End mill for positive chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	73.51 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N

OSG

End mill for negative chamfering, long shank type. It suppresses chatter during machining and has good chip evacuation for a nice surface finish.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	78.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P

OSG

Positive chamfer cutter with long shank. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	78.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters

OSG

By adopting of sharp high helix, clean working surface with less burr can be obtained.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	44.76 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hole Chamfering Leading Drill V Coating Powder HSS Long Shank

OSG

Leading long shank drill with powder metal high speed steel XPM as base material, with 90° V-coated point angle. Ideal for chamfering deep parts.

Select to compare

Configure now
Starting from^∗ ：	23.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Chamfering End Mill 3-Flute

DIXI

High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.

Select to compare

Configure now
Starting from^∗ ：	75.30 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SAGCCC SA Coated Carbide for Center Chamfering

SANKO MFG

Center chamfering cutter with TiAlN coating. Double angle adopted for the chamfer part.

Select to compare

Configure now
Starting from^∗ ：	123.10 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

GCCC for Carbide Center Chamfering

SANKO MFG

[Features]
· Melding the design concepts of endmills and drills, it is available for a wide range of applications.
· Double angle adopted for the chamfer part.
· Provides a clean finish with fewer burrs.

Select to compare

Configure now
Starting from^∗ ：	101.59 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CC for Centering + Chamfering

SANKO MFG

Center chamfering cutter used in a large variety of different applications.

[Features]
· As the outer diameter and shank have the same diameter, interference with the workpiece can be avoided.
· Used in a large variety of different applications.

Select to compare

Configure now
Starting from^∗ ：	69.03 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Toglon Sharp SP 60° Carbide DLC Coating

IWATA TOOL

Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

Select to compare

Configure now
Starting from^∗ ：	113.05 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Toglon Sharp SP 90° Carbide DLC Coating

IWATA TOOL

Select to compare

Configure now
Starting from^∗ ：	92.97 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Toglon Sharp SP 90° Carbide Long Type

IWATA TOOL

Select to compare

Configure now
Starting from^∗ ：	104.35 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Application
Tip angle (θ)
Tool Diameter (D)(mm)
work material
Single blade, two blades
Peripheral Blade Y/N
Tool Material Type
Coating Y/N
Coating Type
R Size (R)(mm)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MISUMI	IWATA TOOL	OSG	OSG	MAKOTOLOY	MISUMI	MISUMI	OSG	FUKUDA	IWATA TOOL	IWATA TOOL	7 LEADERS	MAKOTOLOY	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	DIXI	SANKO MFG	SANKO MFG	SANKO MFG	IWATA TOOL	IWATA TOOL	IWATA TOOL
Product Series	TS coated carbide chamfer, V grooving end mill, 2-flute	Toglon Sharp SP 60° Carbide	Leading Drills, TIN-NC-LDS	2-Flute Spiral Chamfering Cutter (for Steel / Aluminum Alloy) CA-SCC	V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°	TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade	XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type	Leading Drills, NC-LDS	Center Chamfer Mill	Toglon Sharp SP 90° Carbide	Toglon Sharp SP 60° ALD Coating	Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X	V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°	TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model	TS coated carbide chamfering end mill, 2-flute / 15° spiral	TS coated carbide chamfering end mill, 2-flute / short model	TS coated carbide chamfering end mill, 3-flute / short model	Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral	Carbide Chamfering End Mill for Aluminum Machining, 2-Flute	TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short	High-Speed Steel Chamfering End Mill, 2-Flute / Short	XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type	XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle	XAL Series Carbide Chamfer End Mill 2-Flute	XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type	XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type	Leading Drills, VP-LDS	Leading Drills, FX-LS-LDS	Leading Drills, FX-LDS	2-Flute Spiral Chamfering Cutter FX-SCC	2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC	2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminum) CA-LS-SCC	3-Flute, Chamfering Cutter (Negative Type) HSCT-N	3-Flute, Chamfering Cutter (Positive Type) HSCT-P	3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N	3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P	High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters	Hole Chamfering Leading Drill V Coating Powder HSS Long Shank	Carbide Solid Chamfering End Mill 3-Flute	SAGCCC SA Coated Carbide for Center Chamfering	GCCC for Carbide Center Chamfering	CC for Centering + Chamfering	Toglon Sharp SP 60° Carbide DLC Coating	Toglon Sharp SP 90° Carbide DLC Coating	Toglon Sharp SP 90° Carbide Long Type
CAD							2D / 3D															2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
Starting from^∗	71.59 € *Unit price with basic configuration Volume Discount	94.31 € *Unit price with basic configuration	21.10 € *Unit price with basic configuration Volume Discount	81.19 € *Unit price with basic configuration Volume Discount	93.69 € Special price *Unit price with basic configuration Promotional pricing	74.67 € *Unit price with basic configuration Volume Discount	41.90 € *Unit price with basic configuration Volume Discount	12.20 € *Unit price with basic configuration Volume Discount	54.38 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	79.43 € *Unit price with basic configuration	111.05 € *Unit price with basic configuration	47.28 € *Unit price with basic configuration	125.71 € *Unit price with basic configuration	48.89 € *Unit price with basic configuration Volume Discount	42.10 € *Unit price with basic configuration Volume Discount	38.81 € *Unit price with basic configuration Volume Discount	46.59 € *Unit price with basic configuration Volume Discount	40.79 € *Unit price with basic configuration Volume Discount	72.54 € *Unit price with basic configuration Volume Discount	57.90 € *Unit price with basic configuration Volume Discount	-	37.62 € *Unit price with basic configuration Volume Discount	42.61 € *Unit price with basic configuration Volume Discount	32.62 € *Unit price with basic configuration Volume Discount	43.97 € *Unit price with basic configuration Volume Discount	42.86 € *Unit price with basic configuration Volume Discount	17.24 € *Unit price with basic configuration	295.75 € *Unit price with basic configuration	357.80 € *Unit price with basic configuration	88.29 € *Unit price with basic configuration Volume Discount	84.50 € *Unit price with basic configuration	87.63 € *Unit price with basic configuration Volume Discount	73.17 € *Unit price with basic configuration Volume Discount	73.51 € *Unit price with basic configuration Volume Discount	78.36 € *Unit price with basic configuration Volume Discount	78.36 € *Unit price with basic configuration Volume Discount	44.76 € *Unit price with basic configuration Volume Discount	23.64 € *Unit price with basic configuration	75.30 € *Unit price with basic configuration	123.10 € *Unit price with basic configuration	101.59 € *Unit price with basic configuration	69.03 € *Unit price with basic configuration	113.05 € *Unit price with basic configuration	92.97 € *Unit price with basic configuration	104.35 € *Unit price with basic configuration
Min. Shipping Days	5 Days	6 Days	6 Days	6 Days	Same day	5 Days	5 Days	6 Days	Same day	6 Days	6 Days	6 Days	8 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	7 Days	5 Days	5 Days	5 Days	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	8 Days	8 Days	6 Days	8 Days	6 Days	6 Days	6 Days
Specifications	TS General Steel 2 Flutes					TS SUS 2 Flutes								TS General Steel 2 Flutes	TS General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)	TS General Steel 3 Flutes S (Short)	Non-Coated Aluminum 2 Flutes	Non-Coated Aluminum 2 Flutes	TiCN 2 Flutes S (Short)	Non-Coated 2 Flutes S (Short)
Application	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)	Centering (Positioning)
Tip angle (θ)	60 ～ 120	60	60 ～ 120	90	90	90	-	90 ～ 130	60 ～ 120	90	60	90	120	90	90	60 ～ 120	90	90	90	60 ～ 120	60 ～ 160	-	-	-	-	-	90	90	90	90	90	90	90	90	90	90	-	90	90	-	-	-	60	90	90
Tool Diameter (D)(mm)	3 ～ 16	1.2 ～ 16	3 ～ 25	0.8 ～ 1	1 ～ 20	3 ～ 12	-	3 ～ 25	4 ～ 40	1.2 ～ 16	0.6 ～ 4	0.5 ～ 20	1 ～ 20	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	10 ～ 25	10 ～ 25	-	-	-	-	-	3 ～ 25	16 ～ 25	16 ～ 25	0.8 ～ 1	0.8 ～ 1	0.8 ～ 1	1 ～ 2	1 ～ 2	1 ～ 2	1 ～ 2	-	3 ～ 25	2 ～ 12	3 ～ 20	3 ～ 20	6 ～ 32	2 ～ 16	1.2 ～ 16	3 ～ 12
work material	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Resin[○]	General Steel[○] / Aluminum[○] / Copper[○] / Resin[○]	Quenched and tempered steel[○] / High Hardness Steel[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	General Steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	General Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	-	-	-	Single blade	Single blade	Single blade
Peripheral Blade Y/N	N/A	N/A	N/A	N/A	-	N/A	Available	N/A	Available	N/A	N/A	-	-	Available	N/A	Available	Available	N/A	N/A	Available	Available	Available	N/A	N/A	Available	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	Available	-	Available	Available	Available	N/A	N/A	N/A
Tool Material Type	Carbide	Carbide	High-speed steel	Carbide	Carbide	Carbide	Carbide	High-speed steel	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Powder high-speed steel	Carbide	Carbide	Carbide	Cobalt HSS	Carbide	Carbide	Carbide
Coating Y/N	Available	N/A	Available	N/A	N/A	Available	Available	N/A	N/A	N/A	Available	Available	Available	Available	Available	Available	Available	N/A	N/A	Available	Available / N/A	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	N/A	N/A	N/A	N/A	N/A	Available	Available	Available	Available	N/A	N/A	Available	Available	N/A
Coating Type	TS	-	TiN	Non-Coated	-	TS	AlCrN	Non-Coated	Non-Coated	-	Other	Other	TiAlN	TS	TS	TS	TS	-	-	-	TiCN	AlCrN	AlCrN	AlCrN	AlCrN	TS	TiCN	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN	TiCN	TiAlN	TiAlN	Non-Coated	Non-Coated	DLC	DLC	-
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Show only stock items
Clear

Application
- Centering (Positioning)
- Hole Chamfer
- Chamfering/Horizontal
- V Groove
- Round Chamfer
- Drilling
- Other
Images

Clear

Tip angle (θ)
5～85°

30

45

45°

60

60°

65°

75°

90

90°

Center Hole Angle: 90°

120

130

135
[60-160/1]
Drawing

Clear

Tool Diameter (D)(mm)
0 to 2

0.1

0.2

0.3

0.3, 0.6

0.4

0.5

0.5, 1

0.6

0.7

0.8

0.9

1

1, 2

1.2

1.5

1.6

1.8

2

2.4

2.5

2.6

2.8

3

3.17

3.2

3.3

3.4

3.5

3.6

3.8

4

4.2

4.4

4.5

4.6

4.8

5

5.2

5.4

5.5

5.6

5.8

6

6.2

6.35

6.4

6.5

6.6

6.8

7

7.2

7.4

7.5

7.6

7.8

7.92

8

8.2

8.4

8.5

8.8

9.4

9.53

10

10.2

10.4

10.8

11

11.4

12

12.4

12.7

13

13.4

14

14.4

15

15.4

15.88

16

17

18

19

20

21

22

23

25

26

30

31

32

35

36

40

45

46

50

55

60

65

66

70

75

80

90

100
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Single blade, two blades
- Single blade
- Double-edged
Images

Clear

Peripheral Blade Y/N
- Available
- N/A
Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
Details

Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- TS
- TiAlN
- TiCN
- TiN
- DLC
- Non-Coated
- AlCrN
- ALT
- Other
Details

Clear

R Size (R)(mm)
0.1

0.15

0.2

0.25

0.3

0.35

0.4

0.5

0.55

0.6

0.7

0.75

0.8

0.85

0.9

0.95

1

1, 1.5

1.1

1.2

1.25

1.3

1.4

1.5

1.6

1.7

1.75

1.8

1.9

2

2, 3

2.1

2.2

2.25

2.3

2.4

2.5

2.6

2.7

2.75

2.8

2.9

3

3.25

3.5

3.75

4

4.25

4.5

4.75

5

5.25

5.5

5.75

6

6.25

6.5

6.75

7

7.25

7.5

7.75

8

8.5

9

9.5

10

10.5

11

11.5

12

12.5

13

13.5

14

14.5

15

15.5

16

16.5

17

17.5

18

18.5

19

19.5

20

20.5

21

21.5

22

22.5

23

23.5

24

24.5

25

25.5

26

26.5

27

27.5

28

28.5

29

29.5

30
Drawing

Clear

Brand

- MISUMI (16)
- Cost Efficient Products ()
- MAKOTOLOY (16)
- OSG (15)
- IWATA TOOL (9)
- SANKO MFG (3)
- 7 LEADERS (1)
- DAIICHITOOL (1)
- DIXI (1)
- EIKOSHA (1)
- FUJIGEN (1)
- FUKUDA (1)
- SPEED TIGER (1)
- THE CUT (1)
- BIG KAISER (0)
- MAPAL (0)
- STAR-M (0)
- NS TOOL (0)
- UNION TOOL (0)
- DIJET (0)
- OKAZAKI SEIKO (0)
- NT TOOL (0)
- GUHRING (0)
- NOGAJAPAN (0)
- TAIYO-TOOL (0)
- SANDVIK (0)
- KYOWA SEIKO (0)
- ASAHI TOOLS (0)
Clear