(página 2) General Steel | Chamfer, V-Grooves - Chamfering / Centering Tools - Configure and purchase | MISUMI

IWATA TOOL

[Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	90	1.2 ～ 16	General Steel[○]	Single blade	N/A	Carbide	N/A	-

Preço regular (excluindo IVA):

79.43 €～

Data de envio regular:

6 dias úteis

Configurar

IWATA TOOL

Toglon Sharp SP 90° Carbide Long Type

[Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	90	3 ～ 12	General Steel[○]	Single blade	N/A	Carbide	N/A	-

Preço regular (excluindo IVA):

104.35 €～

Data de envio regular:

6 dias úteis

Configurar

ASAHI TOOLS

Angular Cutter with TAG Handle G2

Brazed Shape Milling Cutter for Dovetail Grooving Can be used for thinning hole processing and the like at the bottom of the table groove

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Chamfering/Horizontal	45° ～ 60°	15 ～ 100	General Steel[○]	Single blade	Available	Carbide	N/A	Non-Coated

Preço regular (excluindo IVA):

162.11 €～

Data de envio regular:

6 dias úteis

Configurar

ASAHI TOOLS

CMC MC Chamfering Cutter G2

Soldering shape, Angle tolerance ±15'.Shape accuracy with straight edge.Applications, Hole chamfering/bevelling/horizontal run Work material, General steel/heat treated steel/stainless steel/cast iron/aluminium/copper/resinSingle-edged blade2 blades.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer / Chamfering/Horizontal	60 ～ 90	10 ～ 60	General Steel[○]	Single blade	Available	Carbide	N/A	Non-Coated

Preço regular (excluindo IVA):

113.60 €～

Data de envio regular:

6 dias úteis

Configurar

CS2S Type II Chamfering Cutter (Single Flute), Straight Shank

Volume Discount

OKAZAKI SEIKO

CS2S Type II Chamfering Cutter (Single Flute), Straight Shank

1-flute type. For steel and stainless steel. All products are TiN coated.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer	90	66	General Steel[○]	Single blade	N/A	Cobalt HSS	Available	TiN

Preço regular (excluindo IVA):

371.94 €

Data de envio regular:

6 dias úteis

Configurar

CS3S Type III Chamfering Cutter (3-Flute), Straight Shank

Volume Discount

OKAZAKI SEIKO

CS3S Type III Chamfering Cutter (3-Flute), Straight Shank

3-flute type. For steel and stainless steel. All products are TiN coated.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer	90	20	General Steel[○]	Single blade	N/A	Cobalt HSS	Available	TiN

Preço regular (excluindo IVA):

102.41 €

Data de envio regular:

6 dias úteis

Configurar

Volume Discount

OKAZAKI SEIKO

SVM Chamfering Mill, Non-Coated

In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer / Chamfering/Horizontal / V Groove	90 ～ 120	3 ～ 20	General Steel[○]	Single blade	Available	Carbide	N/A	Non-Coated

Preço regular (excluindo IVA):

83.38 €～

Data de envio regular:

8 dias úteis

Configurar

OKAZAKI SEIKO

SVMA Chamfering Mill, OK Coated

In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer / Chamfering/Horizontal / V Groove	90 ～ 120	3 ～ 20	General Steel[○]	Single blade	Available	Carbide	Available	TiAlN

Preço regular (excluindo IVA):

104.53 €～

Data de envio regular:

8 dias úteis

Configurar

DIJET

Solid V Point Mill VSE VSESS Type

It is a tool with excellent abrasion resistance.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Chamfering/Horizontal / V Groove / Drilling / Other	60 ～ 90	5 ～ 12	General Steel[○]	Single blade	-	Carbide	N/A	Non-Coated

Preço regular (excluindo IVA):

106.60 €～

Data de envio regular:

6 dias úteis

Configurar

Volume Discount

NT TOOL

NEW Chamfering Drill

For machining non-viscous materials[Features]· A wide range of chamfering sizes with one unit.· Beautiful cut surfaces with zero chatter.· Easy positioning.· Uses Cobalt HSS

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer	90	-	General Steel[○]	Single blade / Double-edged	N/A	Cobalt HSS	N/A	-

Preço regular (excluindo IVA):

53.24 €～

Data de envio regular:

6 dias úteis

Configurar

EIKOSHA

Chamfering Cutter (for Spool Bushing) RC

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Round Chamfer	-	-	General Steel[○]	-	-	Cobalt HSS	N/A	-

Preço regular (excluindo IVA):

108.97 €～

Data de envio regular:

6 dias úteis

Configurar

Volume Discount

EIKOSHA

Starting Drill GSS

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Drilling	90 ～ 135	3 ～ 25	General Steel[○]	-	-	Cobalt HSS	Available	TiN

Preço regular (excluindo IVA):

23.20 €～

Data de envio regular:

6 dias úteis

Configurar

EIKOSHA

Umbrella-Type Cutter w/ Handle PCS

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer	60 ～ 90	15 ～ 100	General Steel[○]	-	-	High-speed steel / Cobalt HSS	N/A	-

Preço regular (excluindo IVA):

106.30 €～

Data de envio regular:

6 dias úteis

Configurar

DESCONTO
Volume Discount

KYOWA SEIKO

Carbide Chamfering Cutter KMC-2

[Features] It can be used for chamfering and horizontal machining. [Features] By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron and aluminium.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Chamfering/Horizontal	90°	0.3 ～ 4	General Steel[◎]	Single blade	-	Carbide	N/A	-

Preço regular (excluindo IVA):

42.95 €～

Preço regular (excluindo IVA):

Preço especial

Data de envio regular:

Item em stock: 1 dia útil

Alguns artigos podem ser enviados no próprio dia

Configurar

KYOWA SEIKO

Carbide Inversed Chamfering Cutter KUMC-4

4 straight cutting edges.45° (one-sided angle)Material, general steel/heat-treated steel/stainless steel/cast iron/aluminiumSingle-edged bladeTool grade, carbide

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Chamfering/Horizontal	-	-	General Steel[◎]	Single blade	-	Carbide	N/A	-

Preço regular (excluindo IVA):

109.96 €～

Data de envio regular:

8 dias úteis

Configurar

KYOWA SEIKO

Carbide Inversed Chamfering Cutter KUMW-4

4 straight cutting edges.90° (including angle type)Working material, General steel/Heat treated steel/Stainless steel/Cast iron/Aluminium/Copper/ResinSingle-edged bladeTool quality, carbide.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Chamfering/Horizontal	-	-	General Steel[◎]	Single blade	-	Carbide	N/A	-

Preço regular (excluindo IVA):

109.96 €～

Data de envio regular:

8 dias úteis

Configurar

SANDVIK

CoroMill Plura General-Purpose End Mill For Round Chamfering, 1U000

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Chamfering/Horizontal	-	6 ～ 20	General Steel[○]	Single blade	N/A	Carbide	N/A	-

Preço regular (excluindo IVA):

117.96 €～

Data de envio regular:

8 dias úteis

Configurar

SPEED TIGER

SPEED / T, 2-Flute, Multi 90°

[Features]· Blade diameters φ10 or less are high rigidity types with thick shank diameter.· A high-lubricity AlTiN coated tool that is ideal for soft materials with a hardness of HRC 45 or less, such as raw materials or stainless steel. Handy to have one in a magazine rack.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	90	3 ～ 20	General Steel[○]	Double-edged	Available	-	Available	Other

Preço regular (excluindo IVA):

42.39 €～

Data de envio regular:

8 dias úteis

Configurar

7 LEADERS

Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

[Features]· 90° Carbide 2-Flute Chamfering V-Grooving End Mill· Use for V-grooving, horizontal chamfering, centering, hole chamfering.· Nanoparticle Multilayer Coating· Excellent lubricity and abrasion resistance.· Suitable for a wide range of work materials from general steel to aluminum.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	90	0.5 ～ 20	General Steel[◎]	-	-	Carbide	Available	Other

Preço regular (excluindo IVA):

47.43 €～

Data de envio regular:

6 dias úteis

Configurar

Volume Discount

NOGAJAPAN

Blade for Chamfer / Deburring【1 a 10 unidades】

[Features] One blade for chamfering and deburring.Compatible base body: compatible holder (EL04003), compatible handle (NG3000), compatible holder (UH1000, SC1400), compatible handle (NC5100), compatible handle (NC5200).

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Other	-	-	General Steel[○]	-	-	High-speed steel / Cobalt HSS	-	-

Preço regular (excluindo IVA):

31.82 €～

Data de envio regular:

6 dias úteis

Configurar

DAIICHITOOL

Chamfering Reamer (3-Flute) MC

[Features] Bevel reamers with an overall length of 55 to 95 mm and handle diameters of 8 mm, 10 mm and 12 mm.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Chamfering/Horizontal	60° ～ 90°	8 ～ 46	General Steel[○]	Single blade	Available	Cobalt HSS	-	-

Preço regular (excluindo IVA):

56.40 €～

Data de envio regular:

8 dias úteis

Configurar

V Coat XPM 2-Flute (V-Cut Type) V-XPM-VCM

Volume Discount

OSG

V Coat XPM 2-Flute (V-Cut Type) V-XPM-VCM

[Specifications]· Shanks with diameter 25 mm or more are shanks with 2 flattened cutouts.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
-	90	3 ～ 6	General Steel[◎]	Single blade	Available	Powder high-speed steel	Available	Other

Preço regular (excluindo IVA):

81.11 €～

Data de envio regular:

6 dias úteis

Configurar

OSG

WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N

[Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Chamfering/Horizontal	90°	-	General Steel[◎]	Single blade	N/A	Carbide	Available	-

Preço regular (excluindo IVA):

79.82 €～

Data de envio regular:

6 dias úteis

Configurar

OSG

WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P

[Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
-	-	-	General Steel[○]	-	-	Carbide	Available	Other

Preço regular (excluindo IVA):

79.82 €～

Data de envio regular:

6 dias úteis

Configurar

OSG

WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P

[Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
-	-	-	General Steel[○]	-	-	Carbide	Available	Other

Preço regular (excluindo IVA):

84.46 €～

Data de envio regular:

6 dias úteis

Configurar

OSG

WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N

[Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
-	-	-	General Steel[◎]	-	-	Carbide	Available	Other

Preço regular (excluindo IVA):

84.46 €～

Data de envio regular:

6 dias úteis

Configurar

MAKOTOLOY

V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°

[Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer / Chamfering/Horizontal	60	1 ～ 20	General Steel[○]	Single blade	-	Carbide	N/A	-

Preço regular (excluindo IVA):

93.69 €～

Data de envio regular:

6 dias úteis

Configurar

MAKOTOLOY

V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°

[Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	120	1 ～ 20	General Steel[○]	Single blade	-	Carbide	N/A	-

Preço regular (excluindo IVA):

93.69 €～

Data de envio regular:

8 dias úteis

Configurar

MAKOTOLOY

V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°

[Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer / Chamfering/Horizontal	60	1 ～ 20	General Steel[○]	Single blade	-	Carbide	Available	TiAlN

Preço regular (excluindo IVA):

125.71 €～

Data de envio regular:

8 dias úteis

Configurar

MAKOTOLOY

V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°

[Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	90	1 ～ 20	General Steel[○]	Single blade	-	Carbide	Available	TiAlN

Preço regular (excluindo IVA):

125.71 €～

Data de envio regular:

8 dias úteis

Configurar

MAKOTOLOY

V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°

[Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	120	1 ～ 20	General Steel[○]	Single blade	-	Carbide	Available	TiAlN

Preço regular (excluindo IVA):

125.71 €～

Data de envio regular:

8 dias úteis

Configurar

MAKOTOLOY

V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°

[Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer / Chamfering/Horizontal	60	3 ～ 20	General Steel[○]	Single blade	-	Carbide	N/A	-

Preço regular (excluindo IVA):

110.87 €～

Data de envio regular:

8 dias úteis

Configurar

MAKOTOLOY

V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°

[Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	90	3 ～ 20	General Steel[○]	Single blade	-	Carbide	N/A	-

Preço regular (excluindo IVA):

110.87 €～

Data de envio regular:

8 dias úteis

Configurar

MAKOTOLOY

V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°

[Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	120	3 ～ 20	General Steel[○]	Single blade	-	Carbide	N/A	-

Preço regular (excluindo IVA):

110.87 €～

Data de envio regular:

8 dias úteis

Configurar

MAKOTOLOY

V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°

[Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer / Chamfering/Horizontal	60	3 ～ 20	General Steel[○]	Single blade	-	Carbide	Available	TiAlN

Preço regular (excluindo IVA):

134.27 €～

Data de envio regular:

6 dias úteis

Configurar

MAKOTOLOY

V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

[Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	90	3 ～ 20	General Steel[○]	Single blade	-	Carbide	Available	TiAlN

Preço regular (excluindo IVA):

134.27 €～

Data de envio regular:

8 dias úteis

Configurar

MAKOTOLOY

Carbide V Cut End Mill Long Type Coated Series AMVL 120°

[Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	120	3 ～ 20	General Steel[○]	Single blade	-	Carbide	Available	TiAlN

Preço regular (excluindo IVA):

134.27 €～

Data de envio regular:

8 dias úteis

Configurar

MAKOTOLOY

V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°

[Features]· A small but high quality end mill that can also be used with high precision machining technology.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer / Chamfering/Horizontal	60	0.3 ～ 0.9	General Steel[○]	Single blade	-	Carbide	N/A	-

Preço regular (excluindo IVA):

104.69 €～

Data de envio regular:

8 dias úteis

Configurar

MAKOTOLOY

V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°

[Features]· A small but high quality end mill that can also be used with high precision machining technology.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	90	0.3 ～ 0.9	General Steel[○]	Single blade	-	Carbide	N/A	-

Preço regular (excluindo IVA):

104.69 €～

Data de envio regular:

8 dias úteis

Configurar

MAKOTOLOY

V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°

[Features]· A small but high quality end mill that can also be used with high precision machining technology.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	120	0.3 ～ 0.9	General Steel[○]	Single blade	-	Carbide	N/A	-

Preço regular (excluindo IVA):

104.69 €～

Data de envio regular:

8 dias úteis

Configurar

MAKOTOLOY

V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°

[Features]· A small but high quality end mill that can also be used with high precision machining technology.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer / Chamfering/Horizontal	60	0.3 ～ 0.9	General Steel[○]	Single blade	-	Carbide	Available	TiAlN

Preço regular (excluindo IVA):

118.22 €～

Data de envio regular:

8 dias úteis

Configurar

MAKOTOLOY

V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°

[Features]· A small but high quality end mill that can also be used with high precision machining technology.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	90	0.3 ～ 0.9	General Steel[○]	Single blade	-	Carbide	Available	TiAlN

Preço regular (excluindo IVA):

118.22 €～

Data de envio regular:

8 dias úteis

Configurar

MAKOTOLOY

V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°

[Features]· A small but high quality end mill that can also be used with high precision machining technology.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	120	0.3 ～ 0.9	General Steel[○]	Single blade	-	Carbide	Available	TiAlN

Preço regular (excluindo IVA):

118.22 €～

Data de envio regular:

8 dias úteis

Configurar

MAKOTOLOY

V Spot Carbide Drill, Standard Type, TiN Coat, 90°

[Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer	90	3 ～ 25	General Steel[○]	Single blade	-	Carbide	Available	TiN

Preço regular (excluindo IVA):

110.84 €～

Data de envio regular:

8 dias úteis

Configurar

MAKOTOLOY

V Spot Carbide Drill, Standard Type, TiN Coat, 120°

[Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.

Ler mais

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer	120	3 ～ 25	General Steel[○]	Single blade	-	Carbide	Available	TiN

Preço regular (excluindo IVA):

110.84 €～

Data de envio regular:

8 dias úteis

Configurar

Chamfer, V-Grooves (work material: General Steel página 2)

Categorias relacionadas com Chamfer, V-Grooves