Registar

Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Condições de filtragem

Limpar tudo

  • Estoque
  • Application
  • Tip angle (θ)
    [60-160/1]
  • Tool Diameter (D)(mm)
  • work material
  • Tool Material Type
  • R Size (R)(mm)
  • CAD
  • Chamfer, V-Grooves (work material: Quenched and tempered steel)

      • Leading Drills, TIN-NC-LDS
        • Volume Discount

        OSG

        Leading Drills, TIN-NC-LDS

        TiN Coating Makes Possible Higher Speed and Longer Life than NC-LDS
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer60 ~ 1203 ~ 25Quenched and tempered steel[○]Single bladeN/AHigh-speed steelAvailableTiN
        Preço (excluindo IVA) a partir de:
        21.10 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • TS coated carbide chamfer, V grooving end mill, 2-flute
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes

        MISUMI

        TS coated carbide chamfer, V grooving end mill, 2-flute

        [Features] -Ideal for chamfers and V-grooves-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove60 ~ 1203 ~ 16Quenched and tempered steel[◎]Single bladeN/ACarbideAvailableTS
        Preço (excluindo IVA) a partir de:
        68.82 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • TS coated carbide chamfering end mill, 2-flute / 15° spiral
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes

        MISUMI

        TS coated carbide chamfering end mill, 2-flute / 15° spiral

        [Features] -The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool-The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12Quenched and tempered steel[◎]Single bladeN/ACarbideAvailableTS
        Preço (excluindo IVA) a partir de:
        40.79 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
        • Volume Discount

        MISUMI

        XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type

        [Features]・The popular high hardness steel chamfer end mill is even more affordable.・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)・High-efficiency machining is possible by adopting a 6-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal--Quenched and tempered steel[○]Single bladeN/ACarbideAvailableTS
        Preço (excluindo IVA) a partir de:
        42.86 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • 3-Flute, Chamfering Cutter (Negative Type) HSCT-N
        • Volume Discount

        OSG

        3-Flute, Chamfering Cutter (Negative Type) HSCT-N

        End mill for negative chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove901 ~ 2Quenched and tempered steel[○]Single bladeN/ACarbideN/ANon-Coated
        Preço (excluindo IVA) a partir de:
        73.17 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes

        MISUMI

        TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

        Ideal for the Deep Chamfering of Workpieces
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove903 ~ 12Quenched and tempered steel[◎]Single bladeAvailableCarbideAvailableTS
        Preço (excluindo IVA) a partir de:
        48.89 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • TS coated carbide chamfering end mill, 2-flute / short model
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes
        • S (Short)

        MISUMI

        TS coated carbide chamfering end mill, 2-flute / short model

        [Features] -Ideal for chamfering. Can also be used as a deburring tool-Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting-Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal60 ~ 1203 ~ 12Quenched and tempered steel[◎]Single bladeAvailableCarbideAvailableTS
        Preço (excluindo IVA) a partir de:
        38.81 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • TS coated carbide chamfering end mill, 3-flute / short model
        • Volume Discount
        • TS
        • General Steel
        • 3 Flutes
        • S (Short)

        MISUMI

        TS coated carbide chamfering end mill, 3-flute / short model

        [Features] -Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).-Peripheral grooves allow bevel, contour and spiral cutting-The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type-With helix angle on peripheral flutes-Can also be used as a deburring tool-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12Quenched and tempered steel[◎]Single bladeAvailableCarbideAvailableTS
        Preço (excluindo IVA) a partir de:
        46.59 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • TS coated carbide inner R-cutter, 2-flute
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes

        MISUMI

        TS coated carbide inner R-cutter, 2-flute

        [Features] Easy high-quality machining of corner radii-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Round Chamfer--Quenched and tempered steel[◎]Single bladeN/ACarbideAvailableTS
        Preço (excluindo IVA) a partir de:
        48.10 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade
        • Volume Discount
        • TS
        • SUS
        • 2 Flutes

        MISUMI

        TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

        The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12Quenched and tempered steel[○]Single bladeN/ACarbideAvailableTS
        Preço (excluindo IVA) a partir de:
        77.83 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
        • Volume Discount
        • TiCN
        • 2 Flutes
        • S (Short)

        MISUMI

        TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

        The chamfer angle can be selected from 60, 90 and 120°according to the machining style
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal60 ~ 12010 ~ 25Quenched and tempered steel[○]Single bladeAvailablePowder high-speed steelAvailable-
        Preço (excluindo IVA) a partir de:
        55.66 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • High-Speed Steel Chamfering End Mill, 2-Flute / Short
        • Non-Coated
        • 2 Flutes
        • S (Short)

        MISUMI

        High-Speed Steel Chamfering End Mill, 2-Flute / Short

        Chamfering end mill with the angle that can be freely selected in 1° increments
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal60 ~ 16010 ~ 25Quenched and tempered steel[○]Single bladeAvailableCobalt HSSAvailableTiCN
        Data de envio regular:
        13 dias úteis
        Configurar
      • XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
        • Volume Discount

        MISUMI

        XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type

        [Features]・MISUMI's original inner radius cutter specialized for machining high hardness steel.・Ideal for high hardness steel inner radius machining up to 65 HRC.・High-efficiency machining is possible by adopting a 4-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Round Chamfer--Quenched and tempered steel[○]Single bladeN/ACarbideAvailableAlCrN
        Preço (excluindo IVA) a partir de:
        71.31 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
        • Volume Discount

        MISUMI

        XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

        [Features]・Popular 3-flute type for helix angle chambering with high feed rate.・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.・It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal--Quenched and tempered steel[◎]Single bladeAvailableCarbideAvailableAlCrN
        Preço (excluindo IVA) a partir de:
        41.90 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
        • Volume Discount

        MISUMI

        XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type

        [Features]・Popular chamfering product with helix angle.・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal--Quenched and tempered steel[◎]Single bladeAvailableCarbideAvailableAlCrN
        Preço (excluindo IVA) a partir de:
        36.91 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
        • Volume Discount

        MISUMI

        XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

        [Features]・Machining from positioning to chamfering with a single tool.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal--Quenched and tempered steel[◎]Single bladeN/ACarbideAvailableAlCrN
        Preço (excluindo IVA) a partir de:
        41.67 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • XAL Series Carbide Chamfer End Mill 2-Flute
        • Volume Discount

        MISUMI

        XAL Series Carbide Chamfer End Mill 2-Flute

        [Features]・Recommended for chamfering general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal--Quenched and tempered steel[◎]Single bladeN/ACarbideAvailableAlCrN
        Preço (excluindo IVA) a partir de:
        32.62 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
        • Volume Discount

        MISUMI

        XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

        [Features]・Recommended for deep section chamfering of general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.・The long type is ideal for deep cavity milling.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove--Quenched and tempered steel[◎]Single bladeAvailableCarbideAvailableAlCrN
        Preço (excluindo IVA) a partir de:
        43.97 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • XAL Series Carbide Inner Radius Cutter, 2-Flute
        • Volume Discount

        MISUMI

        XAL Series Carbide Inner Radius Cutter, 2-Flute

        [Features]・An essential item for corner rounding.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        ---Quenched and tempered steel[◎]Single bladeN/ACarbideAvailableAlCrN
        Preço (excluindo IVA) a partir de:
        48.10 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • Leading Drills, VP-LDS

          OSG

          Leading Drills, VP-LDS

          V coating enables longer lasting life than TIN-NC-LDS
          Ler mais
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Centering (Positioning) / Hole Chamfer903 ~ 25Quenched and tempered steel[◎]Single bladeN/APowder high-speed steelAvailableTiCN
          Preço (excluindo IVA) a partir de:
          17.24 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Leading Drills, FX-LS-LDS

            OSG

            Leading Drills, FX-LS-LDS

            90° of tip angle with FX coating, carbide leading drill with long shank. Ideal for chamfering deep parts.
            Ler mais
            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            Centering (Positioning) / Hole Chamfer9016 ~ 25Quenched and tempered steel[◎]Single bladeN/ACarbideAvailableTiAlN
            Preço (excluindo IVA) a partir de:
            295.75 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • Leading Drills, FX-LDS

              OSG

              Leading Drills, FX-LDS

              90° of tip angle with FX coating, carbide leading drill. It enables high speed and long life.
              Ler mais
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Centering (Positioning) / Hole Chamfer9016 ~ 25Quenched and tempered steel[◎]Single bladeN/ACarbideAvailableTiAlN
              Preço (excluindo IVA) a partir de:
              357.80 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • 2-Flute Spiral Chamfering Cutter FX-SCC
              • Volume Discount

              OSG

              2-Flute Spiral Chamfering Cutter FX-SCC

              By adopting of sharp high helix, clean working surface with less burr can be obtained.
              Ler mais
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove900.8 ~ 1Quenched and tempered steel[◎]Single bladeN/ACarbideAvailableTiAlN
              Preço (excluindo IVA) a partir de:
              88.29 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • 2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC

                OSG

                2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC

                Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.
                Ler mais
                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove900.8 ~ 1Quenched and tempered steel[◎]Single bladeN/ACarbideAvailableTiAlN
                Preço (excluindo IVA) a partir de:
                84.50 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • 3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N
                • Volume Discount

                OSG

                3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N

                End mill for negative chamfering, long shank type. It suppresses chatter during machining and has good chip evacuation for a nice surface finish.
                Ler mais
                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove901 ~ 2Quenched and tempered steel[○]Single bladeN/ACarbideN/ANon-Coated
                Preço (excluindo IVA) a partir de:
                78.36 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Spiral Chamfering Cutter for SV Chamfering Process

                  UNION TOOL

                  Spiral Chamfering Cutter for SV Chamfering Process

                  [Features]· Carbide spiral chamfering cutter· Half Taper Angle of 45°· The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.
                  Ler mais
                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                  Hole Chamfer / Chamfering/Horizontal / Round Chamfer900.8 ~ 1Quenched and tempered steel[◎]Single bladeN/ACarbideN/A-
                  Preço (excluindo IVA) a partir de:
                  135.77 €
                  Data de envio regular:
                  7 dias úteis
                  Configurar
                • High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters
                  • Volume Discount

                  OSG

                  High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters

                  By adopting of sharp high helix, clean working surface with less burr can be obtained.
                  Ler mais
                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal--Quenched and tempered steel[○]Single bladeN/APowder high-speed steelAvailableTiCN
                  Preço (excluindo IVA) a partir de:
                  44.76 €
                  Data de envio regular:
                  6 dias úteis
                  Configurar
                • Hole Chamfering Leading Drill V Coating Powder HSS Long Shank

                    OSG

                    Hole Chamfering Leading Drill V Coating Powder HSS Long Shank

                    Leading long shank drill with powder metal high speed steel XPM as base material, with 90° V-coated point angle. Ideal for chamfering deep parts.
                    Ler mais
                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                    Centering (Positioning) / Hole Chamfer903 ~ 25Quenched and tempered steel[◎]Single bladeAvailablePowder high-speed steelAvailableTiCN
                    Preço (excluindo IVA) a partir de:
                    23.64 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • Carbide Mini WR Chamfer Cutter

                      EIKOSHA

                      Carbide Mini WR Chamfer Cutter

                      Front / Back R-Chamfering
                      Ler mais
                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                      Round Chamfer-3.8 ~ 13.4Quenched and tempered steel[○]--Carbide--
                      Preço (excluindo IVA) a partir de:
                      200.05 €
                      Data de envio regular:
                      6 dias úteis
                      Configurar
                    • Carbide Mini WR Chamfer Cutter, Long

                        EIKOSHA

                        Carbide Mini WR Chamfer Cutter, Long

                        Front / Back R-Chamfering, Long Pattern
                        Ler mais
                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                        Round Chamfer-6.8 ~ 15.4Quenched and tempered steel[○]--Carbide--
                        Preço (excluindo IVA) a partir de:
                        261.96 €
                        Data de envio regular:
                        6 dias úteis
                        Configurar
                      • New Chamfering Cutter
                        • Volume Discount

                        EIKOSHA

                        New Chamfering Cutter

                        Chamfering, 1-Flute
                        Ler mais
                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                        Chamfering/Horizontal606Quenched and tempered steel[○]--High-speed steel--
                        Preço (excluindo IVA) a partir de:
                        48.99 €
                        Data de envio regular:
                        6 dias úteis
                        Configurar
                      • Center reamer
                        • Volume Discount

                        FUKUDA

                        Center reamer

                        Reamers for center hole finishing or chamfering. Edges of odd number reduce chatter.
                        Ler mais
                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                        Hole Chamfer60 ~ 120-Quenched and tempered steel[○]Single bladeN/AHigh-speed steelN/ANon-Coated
                        Preço (excluindo IVA) a partir de:
                        29.74 €
                        Data de envio regular:
                        6 dias úteis
                        Configurar
                      • GCCC for Carbide Center Chamfering

                          SANKO MFG

                          GCCC for Carbide Center Chamfering

                          [Features]· Melding the design concepts of endmills and drills, it is available for a wide range of applications.· Double angle adopted for the chamfer part.· Provides a clean finish with fewer burrs.
                          Ler mais
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal-10Quenched and tempered steel[○]-AvailableCarbideN/ANon-Coated
                          Preço (excluindo IVA) a partir de:
                          140.94 €
                          Data de envio regular:
                          6 dias úteis
                          Configurar
                        • Toglon Sharp SP 60° ALD Coating

                            IWATA TOOL

                            Toglon Sharp SP 60° ALD Coating

                            [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.
                            Ler mais
                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove600.6 ~ 4Quenched and tempered steel[○]Single bladeN/ACarbideAvailableOther
                            Preço (excluindo IVA) a partir de:
                            103.54 €
                            Data de envio regular:
                            6 dias úteis
                            Configurar
                          • Toglon Sharp SP 90° ALD Coating
                            • Volume Discount

                            IWATA TOOL

                            Toglon Sharp SP 90° ALD Coating

                            [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.
                            Ler mais
                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove900.6 ~ 4Quenched and tempered steel[○]Single bladeN/ACarbideAvailableOther
                            Preço (excluindo IVA) a partir de:
                            103.54 €
                            Data de envio regular:
                            6 dias úteis
                            Configurar
                          • Toglon Miniature Hard SP 90° ALT Coating

                              IWATA TOOL

                              Toglon Miniature Hard SP 90° ALT Coating

                              [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.
                              Ler mais
                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                              Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove900.1 ~ 1.5Quenched and tempered steel[○]Single bladeN/ACarbideAvailableALT
                              Preço (excluindo IVA) a partir de:
                              97.11 €
                              Data de envio regular:
                              6 dias úteis
                              Configurar
                            • SVM Chamfering Mill, Non-Coated
                              • Volume Discount

                              OKAZAKI SEIKO

                              SVM Chamfering Mill, Non-Coated

                              In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.
                              Ler mais
                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                              Hole Chamfer / Chamfering/Horizontal / V Groove90 ~ 1203 ~ 20Quenched and tempered steel[○]Single bladeAvailableCarbideN/ANon-Coated
                              Preço (excluindo IVA) a partir de:
                              80.16 €
                              Data de envio regular:
                              8 dias úteis
                              Configurar
                            • SVMA Chamfering Mill, OK Coated

                                OKAZAKI SEIKO

                                SVMA Chamfering Mill, OK Coated

                                In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.
                                Ler mais
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Hole Chamfer / Chamfering/Horizontal / V Groove90 ~ 1203 ~ 20Quenched and tempered steel[○]Single bladeAvailableCarbideAvailableTiAlN
                                Preço (excluindo IVA) a partir de:
                                100.48 €
                                Data de envio regular:
                                8 dias úteis
                                Configurar
                              • Carbide Chamfering Cutter KMC-2
                                • DESCONTO
                                • Volume Discount

                                KYOWA SEIKO

                                Carbide Chamfering Cutter KMC-2

                                [Features] It can be used for chamfering and horizontal machining. [Features] By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron and aluminium.
                                Ler mais
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Chamfering/Horizontal90°0.3 ~ 4Quenched and tempered steel[○]Single blade-CarbideN/A-
                                Preço (excluindo IVA) a partir de:
                                42.95 €
                                Preço especial
                                Data de envio regular:
                                Item em stock: 1 dia útil
                                Alguns artigos podem ser enviados no próprio dia
                                Configurar
                              • Carbide Inversed Chamfering Cutter KUMC-4

                                  KYOWA SEIKO

                                  Carbide Inversed Chamfering Cutter KUMC-4

                                  4 straight cutting edges.45° (one-sided angle)Material, general steel/heat-treated steel/stainless steel/cast iron/aluminiumSingle-edged bladeTool grade, carbide
                                  Ler mais
                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                  Chamfering/Horizontal--Quenched and tempered steel[○]Single blade-CarbideN/A-
                                  Preço (excluindo IVA) a partir de:
                                  105.71 €
                                  Data de envio regular:
                                  8 dias úteis
                                  Configurar
                                • Carbide Inversed Chamfering Cutter KUMW-4

                                    KYOWA SEIKO

                                    Carbide Inversed Chamfering Cutter KUMW-4

                                    4 straight cutting edges.90° (including angle type)Working material, General steel/Heat treated steel/Stainless steel/Cast iron/Aluminium/Copper/ResinSingle-edged bladeTool quality, carbide.
                                    Ler mais
                                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                    Chamfering/Horizontal--Quenched and tempered steel[○]Single blade-CarbideN/A-
                                    Preço (excluindo IVA) a partir de:
                                    105.71 €
                                    Data de envio regular:
                                    8 dias úteis
                                    Configurar
                                  • CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

                                      SANDVIK

                                      CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                      Chamfering/Horizontal90°8 ~ 12Quenched and tempered steel[○]Single bladeN/ACarbideAvailableOther
                                      Preço (excluindo IVA) a partir de:
                                      116.87 €
                                      Data de envio regular:
                                      6 dias úteis
                                      Configurar
                                    • Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

                                        7 LEADERS

                                        Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

                                        [Features]· 90° Carbide 2-Flute Chamfering V-Grooving End Mill· Use for V-grooving, horizontal chamfering, centering, hole chamfering.· Nanoparticle Multilayer Coating· Excellent lubricity and abrasion resistance.· Suitable for a wide range of work materials from general steel to aluminum.
                                        Ler mais
                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove900.5 ~ 20Quenched and tempered steel[○]--CarbideAvailableOther
                                        Preço (excluindo IVA) a partir de:
                                        50.08 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar
                                      • WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N

                                          OSG

                                          WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N

                                          [Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.
                                          Ler mais
                                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                          Chamfering/Horizontal90°-Quenched and tempered steel[○]Single bladeN/ACarbideAvailable-
                                          Preço (excluindo IVA) a partir de:
                                          79.82 €
                                          Data de envio regular:
                                          6 dias úteis
                                          Configurar
                                        • MUGEN Coating C Chamfer Cutter NSCV-M

                                            NS TOOL

                                            MUGEN Coating C Chamfer Cutter NSCV-M

                                            [Features]· Enables easy C chamfering.· Uses MUGEN coating that dramatically improves the durability.
                                            Ler mais
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Chamfering/Horizontal45°4 ~ 6Quenched and tempered steel[◎]Single bladeAvailableCarbideAvailableTiAlN
                                            Preço (excluindo IVA) a partir de:
                                            106.80 €
                                            Data de envio regular:
                                            6 dias úteis
                                            Configurar