Chamfer, V-Grooves (work material: Stainless Steel página 2)

• 

  OSG

  WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P

  [Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  -	-	-	Stainless Steel[◎]	-	-	Carbide	Available	Other

  Preço regular (excluindo IVA):

  79.82 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  OSG

  WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P

  [Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  -	-	-	Stainless Steel[◎]	-	-	Carbide	Available	Other

  Preço regular (excluindo IVA):

  84.46 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  OSG

  WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N

  [Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  -	-	-	Stainless Steel[○]	-	-	Carbide	Available	Other

  Preço regular (excluindo IVA):

  84.46 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  THE CUT

  V Men-Maru C-MPE-V

  [Features]· Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.· Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.· Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly longer tool life.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Chamfering/Horizontal / V Groove / Drilling / Other	90	10	Stainless Steel[○]	Single blade	-	Carbide	Available	TiAlN

  Preço regular (excluindo IVA):

  192.95 €

  Data de envio regular:

  6 dias úteis

  Configurar