Registar

Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Condições de filtragem

Limpar tudo

  • Estoque
  • Application
  • Tip angle (θ)
    [60-160/1]
  • Tool Diameter (D)(mm)
  • work material
  • Tool Material Type
  • R Size (R)(mm)
  • Chamfer, V-Grooves (Coating Y/N: N/A)

      • Carbide Chamfering End Mill for Aluminium Machining, 2-Flute, 30° Spiral
        • Volume Discount
        • Non-Coated
        • Aluminum
        • 2 Flutes

        MISUMI

        Carbide Chamfering End Mill for Aluminium Machining, 2-Flute, 30° Spiral

        Capable of everything from positioning to chamfering in a single shot
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Single bladeN/ACarbideN/A-
        Preço (excluindo IVA) a partir de:
        40.79 €
        Data de envio regular:
        5 dias úteis
        Configurar
      • 3-Flute, Chamfering Cutter (Negative Type) HSCT-N
        • Volume Discount

        OSG

        3-Flute, Chamfering Cutter (Negative Type) HSCT-N

        End mill for negative chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove901 ~ 2General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]Single bladeN/ACarbideN/ANon-Coated
        Preço (excluindo IVA) a partir de:
        73.17 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • 3-Flute, Chamfering Cutter (Positive Type) HSCT-P
        • Volume Discount

        OSG

        3-Flute, Chamfering Cutter (Positive Type) HSCT-P

        End mill for positive chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove901 ~ 2General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]Single bladeN/ACarbideN/ANon-Coated
        Preço (excluindo IVA) a partir de:
        73.51 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Corner Rounding End Mill
        • Volume Discount

        FUKUDA

        Corner Rounding End Mill

        Round chamfering end mill.
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Round Chamfer--General Steel[○] / Cast Iron[○] / Resin[○]Single bladeN/AHigh-speed steelN/ANon-Coated
        Preço (excluindo IVA) a partir de:
        97.85 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Chamfering Drill
        • Volume Discount

        NT TOOL

        Chamfering Drill

        For machining non-viscous materials[Features]· A wide range of chamfering sizes with one unit.· Beautiful cut surfaces with zero chatter.· Easy Positioning
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Hole Chamfer9010 ~ 25Aluminum[○] / Copper[○]Single blade / Double-edgedN/AHigh-speed steelN/A-
        Preço (excluindo IVA) a partir de:
        22.16 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • NEW Chamfering Drill
        • Volume Discount

        NT TOOL

        NEW Chamfering Drill

        For machining non-viscous materials[Features]· A wide range of chamfering sizes with one unit.· Beautiful cut surfaces with zero chatter.· Easy positioning.· Uses Cobalt HSS
        Ler mais
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Hole Chamfer90-General Steel[○] / High Hardness Steel[○] / Cast Iron[○]Single blade / Double-edgedN/ACobalt HSSN/A-
        Preço (excluindo IVA) a partir de:
        51.18 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Outside Chamfering Cutter (Nice Guy) NGC (SKH51)

          TAIYO-TOOL

          Outside Chamfering Cutter (Nice Guy) NGC (SKH51)

          [Applications]· Hole chamfer[Single Blade / Double Blade]· Single blade[Tool Grade]· High-speed steel[Coating Y/N] N[Coating Type] Non-Coated
          Ler mais
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Hole Chamfer-25 ~ 55-Single blade-High-speed steelN/ANon-Coated
          Preço (excluindo IVA) a partir de:
          203.14 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Carbide inner R-cutter, 2-flute
          • Volume Discount
          • Non-Coated
          • General Steel
          • 2 Flutes

          MISUMI

          Carbide inner R-cutter, 2-flute

          Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes
          Ler mais
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Round Chamfer--General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideN/A-
          Preço (excluindo IVA) a partir de:
          47.50 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • Carbide Chamfering End Mill for Aluminium Machining, 2-Flute
          • Volume Discount
          • Non-Coated
          • Aluminum
          • 2 Flutes

          MISUMI

          Carbide Chamfering End Mill for Aluminium Machining, 2-Flute

          The sharp helix blade achieves the clean machined surface with less burr
          Ler mais
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Single bladeN/ACarbideN/A-
          Preço (excluindo IVA) a partir de:
          75.63 €
          Data de envio regular:
          5 dias úteis
          Configurar
        • High-Speed Steel Chamfering End Mill, 2-Flute / Short
          • Non-Coated
          • 2 Flutes
          • S (Short)

          MISUMI

          High-Speed Steel Chamfering End Mill, 2-Flute / Short

          Chamfering end mill with the angle that can be freely selected in 1° increments
          Ler mais
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal60 ~ 16010 ~ 25General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCobalt HSSN/A-
          Data de envio regular:
          7 dias úteis
          Configurar
        • Leading Drills, NC-LDS
          • Volume Discount

          OSG

          Leading Drills, NC-LDS

          Available tip angles are 90° (45° chamfer), 120°, and 130° (EX GOLD drill centering for slope / curved surfaces).
          Ler mais
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Centering (Positioning) / Hole Chamfer90 ~ 1303 ~ 25General Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/AHigh-speed steelN/ANon-Coated
          Preço (excluindo IVA) a partir de:
          12.20 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • 2-Flute Spiral Chamfering Cutter (for Steel / Aluminium Alloy) CA-SCC
          • Volume Discount

          OSG

          2-Flute Spiral Chamfering Cutter (for Steel / Aluminium Alloy) CA-SCC

          By adopting of sharp high helix, clean working surface with less burr can be obtained.
          Ler mais
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove900.8 ~ 1Aluminum[◎] / Copper[◎] / Resin[○]Single bladeN/ACarbideN/ANon-Coated
          Preço (excluindo IVA) a partir de:
          81.19 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • 2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminium) CA-LS-SCC
          • Volume Discount

          OSG

          2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminium) CA-LS-SCC

          Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.
          Ler mais
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove900.8 ~ 1Aluminum[◎] / Copper[◎] / Resin[○]Single bladeN/ACarbideN/ANon-Coated
          Preço (excluindo IVA) a partir de:
          87.63 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • 3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N
          • Volume Discount

          OSG

          3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N

          End mill for negative chamfering, long shank type. It suppresses chatter during machining and has good chip evacuation for a nice surface finish.
          Ler mais
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove901 ~ 2General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]Single bladeN/ACarbideN/ANon-Coated
          Preço (excluindo IVA) a partir de:
          78.36 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • 3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P
          • Volume Discount

          OSG

          3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P

          Positive chamfer cutter with long shank. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.
          Ler mais
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove901 ~ 2General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]Single bladeN/ACarbideN/ANon-Coated
          Preço (excluindo IVA) a partir de:
          78.36 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Spiral Chamfering Cutter for SV Chamfering Process

            UNION TOOL

            Spiral Chamfering Cutter for SV Chamfering Process

            [Features]· Carbide spiral chamfering cutter· Half Taper Angle of 45°· The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.
            Ler mais
            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            Hole Chamfer / Chamfering/Horizontal / Round Chamfer900.8 ~ 1General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○]Single bladeN/ACarbideN/A-
            Preço (excluindo IVA) a partir de:
            135.77 €
            Data de envio regular:
            7 dias úteis
            Configurar
          • Center Chamfer Mill
            • DESCONTO
            • Volume Discount

            FUKUDA

            Center Chamfer Mill

            A single product capable of five types of machining: center positioning, chamfering, side surface machining, drilling, and V-grooving.
            Ler mais
            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            Centering (Positioning) / Hole Chamfer / V Groove / Drilling / Other60 ~ 1204 ~ 40General Steel[○] / Cast Iron[○] / Resin[○]Single bladeAvailableCobalt HSSN/ANon-Coated
            Preço (excluindo IVA) a partir de:
            58.35 €
            Preço especial
            Data de envio regular:
            Item em stock: 1 dia útil
            Alguns artigos podem ser enviados no próprio dia
            Configurar
          • Chatterless Chamfer Milling Machine
            • DESCONTO
            • Volume Discount

            FUKUDA

            Chatterless Chamfer Milling Machine

            6-flute blade improves cutting force, fantastic sharpness means zero chatter, horizontal motion during face milling is possible, and the uncomfortable metallic sound during machining is drastically reduced.[Features]· Chamfering.· Drilling machines, milling machines, machining centers.· Horizontal Milling
            Ler mais
            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            Hole Chamfer / Chamfering/Horizontal60 ~ 120-General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/ACobalt HSSN/ANon-Coated
            Preço (excluindo IVA) a partir de:
            41.32 €
            Preço especial
            Data de envio regular:
            Item em stock: 1 dia útil
            Alguns artigos podem ser enviados no próprio dia
            Configurar
          • Center Reamer (Taper Shank)

              FUKUDA

              Center Reamer (Taper Shank)

              A reamer used for finishing and chamfering center holes. The odd number of blades reduces chatter.
              Ler mais
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Hole Chamfer60 ~ 90-General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/AHigh-speed steelN/ANon-Coated
              Preço (excluindo IVA) a partir de:
              239.54 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • Center reamer
              • Volume Discount

              FUKUDA

              Center reamer

              Reamers for center hole finishing or chamfering. Edges of odd number reduce chatter.
              Ler mais
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Hole Chamfer60 ~ 120-General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/AHigh-speed steelN/ANon-Coated
              Preço (excluindo IVA) a partir de:
              29.74 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • GCCC for Carbide Center Chamfering

                SANKO MFG

                GCCC for Carbide Center Chamfering

                [Features]· Melding the design concepts of endmills and drills, it is available for a wide range of applications.· Double angle adopted for the chamfer part.· Provides a clean finish with fewer burrs.
                Ler mais
                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal-10General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]-AvailableCarbideN/ANon-Coated
                Preço (excluindo IVA) a partir de:
                140.94 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • Toglon Sharp SP 60° Carbide

                  IWATA TOOL

                  Toglon Sharp SP 60° Carbide

                  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.
                  Ler mais
                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove601.2 ~ 16General Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Single bladeN/ACarbideN/A-
                  Preço (excluindo IVA) a partir de:
                  100.97 €
                  Data de envio regular:
                  6 dias úteis
                  Configurar
                • Toglon Sharp SP 90° Carbide

                    IWATA TOOL

                    Toglon Sharp SP 90° Carbide

                    [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.
                    Ler mais
                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                    Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove901.2 ~ 16General Steel[○] / Aluminum[○] / Copper[○] / Resin[○]Single bladeN/ACarbideN/A-
                    Preço (excluindo IVA) a partir de:
                    87.41 €
                    Data de envio regular:
                    6 dias úteis
                    Configurar
                  • Toglon Sharp SP 90° Carbide Long Type

                      IWATA TOOL

                      Toglon Sharp SP 90° Carbide Long Type

                      [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.
                      Ler mais
                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                      Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove903 ~ 12General Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Single bladeN/ACarbideN/A-
                      Preço (excluindo IVA) a partir de:
                      113.83 €
                      Data de envio regular:
                      6 dias úteis
                      Configurar
                    • Aluminium Samurai

                        FUJIGEN

                        Aluminium Samurai

                        [Features]· Dedicated for aluminum. : The blade tip shape is specialized for aluminum machining and provides a clean cut with less burring, reducing the need for burr removal after machining.· Significantly reduces running cost thanks to its high strength and improved abrasion resistance.· Achieves high runout accuracy within 5/1,000 mm.
                        Ler mais
                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                        Centering (Positioning) / Chamfering/Horizontal904 ~ 10Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
                        Preço (excluindo IVA) a partir de:
                        160.01 €
                        Data de envio regular:
                        9 dias úteis
                        Configurar
                      • SVM Chamfering Mill, Non-Coated
                        • Volume Discount

                        OKAZAKI SEIKO

                        SVM Chamfering Mill, Non-Coated

                        In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.
                        Ler mais
                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                        Hole Chamfer / Chamfering/Horizontal / V Groove90 ~ 1203 ~ 20General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]Single bladeAvailableCarbideN/ANon-Coated
                        Preço (excluindo IVA) a partir de:
                        80.16 €
                        Data de envio regular:
                        8 dias úteis
                        Configurar
                      • Solid V Point Mill VSE VSESS Type

                          DIJET

                          Solid V Point Mill VSE VSESS Type

                          It is a tool with excellent abrasion resistance.
                          Ler mais
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Chamfering/Horizontal / V Groove / Drilling / Other60 ~ 905 ~ 12General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single blade-CarbideN/ANon-Coated
                          Preço (excluindo IVA) a partir de:
                          110.60 €
                          Data de envio regular:
                          6 dias úteis
                          Configurar
                        • For Mentatsu Aluminium AL-VME

                            DIJET

                            For Mentatsu Aluminium AL-VME

                            A tool with excellent abrasion resistance.Working material, aluminiumSingle-edged bladeTool type, carbideTip angle (θ) 90.
                            Ler mais
                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            Chamfering/Horizontal904Aluminum[◎]Single blade-CarbideN/ANon-Coated
                            Preço (excluindo IVA) a partir de:
                            82.01 €
                            Data de envio regular:
                            10 dias úteis
                            Configurar
                          • Chamfering Cutter (for Spool Bushing) RC

                              EIKOSHA

                              Chamfering Cutter (for Spool Bushing) RC

                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                              Round Chamfer--General Steel[○] / Aluminum[○] / Copper[○]--Cobalt HSSN/A-
                              Preço (excluindo IVA) a partir de:
                              104.76 €
                              Data de envio regular:
                              6 dias úteis
                              Configurar
                            • Umbrella-Type Cutter w/ Handle PCS

                                EIKOSHA

                                Umbrella-Type Cutter w/ Handle PCS

                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Hole Chamfer60 ~ 9015 ~ 100General Steel[○] / Aluminum[○] / Copper[○]--High-speed steel / Cobalt HSSN/A-
                                Preço (excluindo IVA) a partir de:
                                102.21 €
                                Data de envio regular:
                                6 dias úteis
                                Configurar
                              • Carbide Chamfering Cutter KMC-2
                                • DESCONTO
                                • Volume Discount

                                KYOWA SEIKO

                                Carbide Chamfering Cutter KMC-2

                                [Features] It can be used for chamfering and horizontal machining. [Features] By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron and aluminium.
                                Ler mais
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Chamfering/Horizontal90°0.3 ~ 4General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]Single blade-CarbideN/A-
                                Preço (excluindo IVA) a partir de:
                                42.95 €
                                Preço especial
                                Data de envio regular:
                                Item em stock: 1 dia útil
                                Alguns artigos podem ser enviados no próprio dia
                                Configurar
                              • Carbide Inversed Chamfering Cutter KUMC-4

                                  KYOWA SEIKO

                                  Carbide Inversed Chamfering Cutter KUMC-4

                                  4 straight cutting edges.45° (one-sided angle)Material, general steel/heat-treated steel/stainless steel/cast iron/aluminiumSingle-edged bladeTool grade, carbide
                                  Ler mais
                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                  Chamfering/Horizontal--General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]Single blade-CarbideN/A-
                                  Preço (excluindo IVA) a partir de:
                                  105.71 €
                                  Data de envio regular:
                                  8 dias úteis
                                  Configurar
                                • Carbide Inversed Chamfering Cutter KUMW-4

                                    KYOWA SEIKO

                                    Carbide Inversed Chamfering Cutter KUMW-4

                                    4 straight cutting edges.90° (including angle type)Working material, General steel/Heat treated steel/Stainless steel/Cast iron/Aluminium/Copper/ResinSingle-edged bladeTool quality, carbide.
                                    Ler mais
                                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                    Chamfering/Horizontal--General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○]Single blade-CarbideN/A-
                                    Preço (excluindo IVA) a partir de:
                                    105.71 €
                                    Data de envio regular:
                                    8 dias úteis
                                    Configurar
                                  • Chamfering Tool CFT (SKH57)

                                      TAIYO-TOOL

                                      Chamfering Tool CFT (SKH57)

                                      [Applications]· Hole chamfer[Single Blade / Double Blade]· Single blade[Tool Grade]· High-speed steel[Coating Y/N] N[Coating Type] Non-Coated[Flute No.] 1-Flute
                                      Ler mais
                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                      Hole Chamfer60 ~ 9010 ~ 20-Single blade-High-speed steelN/ANon-Coated
                                      Preço (excluindo IVA) a partir de:
                                      129.62 €
                                      Data de envio regular:
                                      6 dias úteis
                                      Configurar
                                    • Mini Corner Round Cutter MCRC (SKH56)

                                        TAIYO-TOOL

                                        Mini Corner Round Cutter MCRC (SKH56)

                                        [Applications]· Round chamfer[Single Blade / Double Blade]· Single blade[Tool Grade]· High-speed steel[Coating Y/N] N[Coating Type] Non-Coated[Flute No.] 1-Flute
                                        Ler mais
                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                        Round Chamfer-2.6 ~ 23-Single blade-High-speed steelN/ANon-Coated
                                        Preço (excluindo IVA) a partir de:
                                        94.85 €
                                        Data de envio regular:
                                        6 dias úteis
                                        Configurar
                                      • CoroMill Plura General-Purpose End Mill For Round Chamfering, 1U000

                                          SANDVIK

                                          CoroMill Plura General-Purpose End Mill For Round Chamfering, 1U000

                                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                          Chamfering/Horizontal-6 ~ 20General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]Single bladeN/ACarbideN/A-
                                          Preço (excluindo IVA) a partir de:
                                          117.96 €
                                          Data de envio regular:
                                          8 dias úteis
                                          Configurar
                                        • C Chamfering Cutter NSCV
                                          • Volume Discount

                                          NS TOOL

                                          C Chamfering Cutter NSCV

                                          [Features]· It allows easy chamfer edge machining.[Part Number: NSCV-4]cutting diameter (D) (mm): 4Blade length (mm): 2Shank diameter (d) (mm): 4Overall length (mm): 60Minimum order quantity: 1 pc.[Part Number: NSCV-6]cutting diameter (D) (mm): 6Blade length (mm): 3Shank diameter (d) (mm): 6Overall length (mm): 70Minimum order quantity: 1 pc.
                                          Ler mais
                                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                          Chamfering/Horizontal45°4 ~ 6Aluminum[◎] / Copper[◎] / Resin[◎]Single bladeAvailableCarbideN/A-
                                          Preço (excluindo IVA) a partir de:
                                          91.81 €
                                          Data de envio regular:
                                          6 dias úteis
                                          Configurar