Registar

Estamos a traduzir a nossa loja para português!
Mas como temos muitos produtos e páginas, vai demorar algum tempo. Entretanto, o nosso catálogo de produtos estará em inglês. Obrigado pela sua paciência!

Condições de filtragem

Limpar tudo

  • Application
  • Tip angle (θ)
  • Tool Diameter (D)(mm)
  • work material
  • Tool Material Type

Chamfer, V-Grooves (Coating Type: Other)

    • CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

        SANDVIK

        CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Chamfering/Horizontal90°8 ~ 12General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Single bladeN/ACarbideAvailableOther
        Preço (excluindo IVA) a partir de:
        116.87 €
        Data de envio regular:
        6 dias úteis
        Configurar
      • Toglon Sharp SP 60° ALD Coating

          IWATA TOOL

          Toglon Sharp SP 60° ALD Coating

          [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.
          Ler mais
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove600.6 ~ 4Quenched and tempered steel[○] / High Hardness Steel[○]Single bladeN/ACarbideAvailableOther
          Preço (excluindo IVA) a partir de:
          103.54 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Toglon Sharp SP 90° ALD Coating
          • Volume Discount

          IWATA TOOL

          Toglon Sharp SP 90° ALD Coating

          [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.
          Ler mais
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove900.6 ~ 4Quenched and tempered steel[○] / High Hardness Steel[○]Single bladeN/ACarbideAvailableOther
          Preço (excluindo IVA) a partir de:
          103.54 €
          Data de envio regular:
          6 dias úteis
          Configurar
        • Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

            7 LEADERS

            Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

            [Features]· 90° Carbide 2-Flute Chamfering V-Grooving End Mill· Use for V-grooving, horizontal chamfering, centering, hole chamfering.· Nanoparticle Multilayer Coating· Excellent lubricity and abrasion resistance.· Suitable for a wide range of work materials from general steel to aluminum.
            Ler mais
            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove900.5 ~ 20General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]--CarbideAvailableOther
            Preço (excluindo IVA) a partir de:
            50.08 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • V Coat XPM 2-Flute Short (V-Cut Type) V-XPM-VCMS
            • Volume Discount

            OSG

            V Coat XPM 2-Flute Short (V-Cut Type) V-XPM-VCMS

            [Specifications]· Shanks with diameter 25 mm or more are shanks with 2 flattened cutouts.
            Ler mais
            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            -8X60° ~ 12X120°--Single bladeAvailablePowder high-speed steelAvailableOther
            Preço (excluindo IVA) a partir de:
            84.71 €
            Data de envio regular:
            6 dias úteis
            Configurar
          • WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P

              OSG

              WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P

              [Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.
              Ler mais
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              ---General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]--CarbideAvailableOther
              Preço (excluindo IVA) a partir de:
              79.82 €
              Data de envio regular:
              6 dias úteis
              Configurar
            • WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P

                OSG

                WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P

                [Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.
                Ler mais
                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                ---General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]--CarbideAvailableOther
                Preço (excluindo IVA) a partir de:
                84.46 €
                Data de envio regular:
                6 dias úteis
                Configurar
              • WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N

                  OSG

                  WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N

                  [Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.
                  Ler mais
                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                  ---General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]--CarbideAvailableOther
                  Preço (excluindo IVA) a partir de:
                  84.46 €
                  Data de envio regular:
                  6 dias úteis
                  Configurar