Chamfer, V-Grooves

• 

  NOGAJAPAN

  Chamfer / Deburring Tool Set

  [Features] ・ Economy kit for hoggersContents of kit: NogaGrip-3, N-holder, S-holder, C-holder + C20, D-holder + D50, N1, N2, S10, S20, S30, S150 blades.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Other	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  99.55 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  NOGAJAPAN

  Chamfering / Deburring Tool (Portable Type)

  [Features]· Pocket storage type deburring tool.· Suitable for deburring of straight parts, curved parts, drilled holes and the like made of metal, plastic, etc.· Suitable for work in narrow places with its thin handle.· Pocket clips are included as standard.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Other	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  9.18 €

  Data de envio regular:

  7 dias úteis

  Configurar
• 

  • Volume Discount

  GUHRING

  Milling Cutter for 120° Chamfering Type N 6714

  Taper half-angle 60° chamfering milling cutter.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  -	120	4 ～ 12	-	-	-	Carbide	Available	TiAlN

  Preço regular (excluindo IVA):

  54.67 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  NS TOOL

  MUGEN Coating C Chamfer Cutter NSCV-M

  [Features]· Enables easy C chamfering.· Uses MUGEN coating that dramatically improves the durability.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	45°	4 ～ 6	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	Available	Carbide	Available	TiAlN

  Preço regular (excluindo IVA):

  111.08 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • DESCONTO

  MAKOTOLOY

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	90	1 ～ 20	General Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Carbide	N/A	-

  Preço regular (excluindo IVA):

  93.69 €～

  Preço regular (excluindo IVA):

  Preço especial

  Data de envio regular:

  Item em stock: 1 dia útil

  Alguns artigos podem ser enviados no próprio dia

  Configurar
• 

  SANDVIK

  SANDVIK CoroMill 326 Solid Carbide End Mill for Chamfer Milling

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  -	-	6 ～ 8	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  58.52 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TiCN
  • 2 Flutes
  • S (Short)

  MISUMI

  TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

  The chamfer angle can be selected from 60, 90 and 120°according to the machining style

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	60 ～ 120	10 ～ 25	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Powder high-speed steel	Available	-

  Preço regular (excluindo IVA):

  57.90 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

  [Features]・Popular 3-flute type for helix angle chambering with high feed rate.・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.・It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  Ler mais

  CAD:

  2D

  /3D

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	-	-	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Carbide	Available	AlCrN

  Preço regular (excluindo IVA):

  41.90 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  XAL Series Carbide Inner Radius Cutter, 2-Flute

  [Features]・An essential item for corner rounding.

  Ler mais

  CAD:

  2D

  /3D

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  -	-	-	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Carbide	Available	AlCrN

  Preço regular (excluindo IVA):

  50.04 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  OSG

  Leading Drills, TIN-NC-LDS

  TiN Coating Makes Possible Higher Speed and Longer Life than NC-LDS

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer	60 ～ 120	3 ～ 25	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	Single blade	N/A	High-speed steel	Available	TiN

  Preço regular (excluindo IVA):

  21.10 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  NOGAJAPAN

  Back Seat Mini Chamfer (Dovetail 45° Blade)

  [Features]· Mini chamfer consisting only of back chamfer blade.· Ideal for chamfering undersides of shallow bases.[Applications]· Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.· A mini chamfer that can chamfer and deburr by back milling drill holes.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  -	45	1.5 ～ 6	-	-	-	-	-	TiAlN

  Preço regular (excluindo IVA):

  96.27 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  NOGAJAPAN

  Teddy Bar Chamfering / Deburring Tool

  [Features]· Pocket storage type deburring tool.· Suitable for deburring of straight parts, curved parts, drilled holes and the like made of metal, plastic, etc.· Suitable for work in narrow places with its thin handle.· Pocket clips are included as standard.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Other	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  11.47 €

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  NOGAJAPAN

  Chamfer / Deburring Tool

  [Features]· This is used for producing clearance at the corner.· A tool for marking.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Other	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  30.44 €

  Data de envio regular:

  10 dias úteis

  Configurar
• 

  STAR-M

  Cutter Kadokko

  [Features]· Ideal for cutting off protrusions of decorative tapes and wood tapes attached to furniture or fittings.· Uses ceramic blade.· Cut end shape, square (90 degrees).[Applications]· For cutting decorative tapes.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  46.48 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  SANDVIK CoroMill Plura Solid Carbide End Mill for Chamfer Milling

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  -	-	3.17 ～ 20	General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	-	-	-	-

  Preço regular (excluindo IVA):

  59.45 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Non-Coated
  • 2 Flutes
  • S (Short)

  MISUMI

  High-Speed Steel Chamfering End Mill, 2-Flute / Short

  Chamfering end mill with the angle that can be freely selected in 1° increments

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	60 ～ 160	10 ～ 25	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Cobalt HSS	Available / N/A	TiCN

  Data de envio regular:

  7 dias úteis

  Configurar
• 

  • Volume Discount

  OSG

  Leading Drills, NC-LDS

  Available tip angles are 90° (45° chamfer), 120°, and 130° (EX GOLD drill centering for slope / curved surfaces).

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer	90 ～ 130	3 ～ 25	General Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	High-speed steel	N/A	Non-Coated

  Preço regular (excluindo IVA):

  12.20 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  GUHRING

  Milling Cutter for 60° Chamfering Type N 6711

  Taper half-angle 30° chamfering milling cutter.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  -	60	4 ～ 12	-	-	-	Carbide	Available	TiAlN

  Preço regular (excluindo IVA):

  50.44 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  TAIYO-TOOL

  Chamfering Tool CFT (SKH57)

  [Applications]· Hole chamfer[Single Blade / Double Blade]· Single blade[Tool Grade]· High-speed steel[Coating Y/N] N[Coating Type] Non-Coated[Flute No.] 1-Flute

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Hole Chamfer	60 ～ 90	10 ～ 20	-	Single blade	-	High-speed steel	N/A	Non-Coated

  Preço regular (excluindo IVA):

  134.81 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  TAIYO-TOOL

  Outside Chamfering Cutter (Nice Guy) NGC (SKH51)

  [Applications]· Hole chamfer[Single Blade / Double Blade]· Single blade[Tool Grade]· High-speed steel[Coating Y/N] N[Coating Type] Non-Coated

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Hole Chamfer	-	25 ～ 55	-	Single blade	-	High-speed steel	N/A	Non-Coated

  Preço regular (excluindo IVA):

  211.31 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  SANDVIK

  CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90°	8 ～ 12	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Single blade	N/A	Carbide	Available	Other

  Preço regular (excluindo IVA):

  116.87 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  NOGAJAPAN

  Back Seat Mini Chamfer (Long Reach 90° Blade)

  [Features]· A solid carbide chamfering cutter which can chamfer small diameter hole backs (minimum blade diameter: 3.0 mm).· Ideal for machining.· Spiral blade provides smooth sharpness.· A mini chamfer that can chamfer/deburr by milling either the back or front of the drill hole.[Applications]· Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.· A mini chamfer that can chamfer and deburr by milling either the back or front of the drill hole.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  -	90	3 ～ 12	-	-	-	-	-	TiAlN

  Preço regular (excluindo IVA):

  96.27 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  IWATA TOOL

  High Speed Chamfering Tool TOGLON® Multi Chamfer

  [Features]· Toglon-shaped 5-flute chamfering dedicated model· Ultra-high speed machining with suppressed burrs is possible for light chamfering[Applications]· Work materials: Mild steel, carbon steel, alloy steel, tempered steel, stainless steel, titanium alloy

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  -	90	-	-	-	-	-	-	Non-Coated / ALT

  Preço regular (excluindo IVA):

  64.75 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  NOGAJAPAN

  Chamfer / Deburring Tool

  [Features]· Suitable for deburring of straight parts, curved parts, drilled holes and the like made of metal, plastic, etc.· A robust pencil type deburring tool.· The housing part holding the blade is made of steel so it can be used semi-permanently.· All S blades can be attached.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Other	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  16.20 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  NOGAJAPAN

  Chamfering / Deburring Tool (for 1 to 3 mm Wide Inner Diameter O-Ring Grooves)

  [Features]· Deburring tool for the inside diameter of O-ring grooves with a 1 to 3 mm width and a depth of up to 20 mm.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Other	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  24.62 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  NOGAJAPAN

  Chamfering / Deburring Tool (for Making Clearance for Slots Over 3.5 mm)

  [Features]· Used to create corner relief in narrow slots of 3.5 mm or more.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Other	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  32.17 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  NOGAJAPAN

  Tools for Cleaning Metal Scraps Chip Hook Set

  [Features]· Can be mounted onto a chip hook and used for scraping out chips.[Applications]· For cleaning the metal powder produced in cut machining such as with a lathe.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Other	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  16.70 €

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  • Volume Discount

  NS TOOL

  C Chamfering Cutter NSCV

  [Features]· It allows easy chamfer edge machining.[Part Number: NSCV-4]cutting diameter (D) (mm): 4Blade length (mm): 2Shank diameter (d) (mm): 4Overall length (mm): 60Minimum order quantity: 1 pc.[Part Number: NSCV-6]cutting diameter (D) (mm): 6Blade length (mm): 3Shank diameter (d) (mm): 6Overall length (mm): 70Minimum order quantity: 1 pc.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	45°	4 ～ 6	Aluminum[◎] / Copper[◎] / Resin[◎]	Single blade	Available	Carbide	N/A	-

  Preço regular (excluindo IVA):

  95.50 €～

  Data de envio regular:

  6 dias úteis

  Configurar
• 

  MAKOTOLOY

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°

  [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	120	1 ～ 20	General Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Carbide	N/A	-

  Preço regular (excluindo IVA):

  93.69 €～

  Data de envio regular:

  8 dias úteis

  Configurar
• 

  SANDVIK

  SANDVIK U-Max Chamfer Milling Cutter

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  -	-	-	-	-	-	-	-	-

  Preço regular (excluindo IVA):

  410.69 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes

  MISUMI

  TS coated carbide chamfer, V grooving end mill, 2-flute

  [Features] -Ideal for chamfers and V-grooves-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	60 ～ 120	3 ～ 16	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Carbide	Available	TS

  Preço regular (excluindo IVA):

  71.59 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes

  MISUMI

  TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

  Ideal for the Deep Chamfering of Workpieces

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	90	3 ～ 12	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Carbide	Available	TS

  Preço regular (excluindo IVA):

  48.89 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes

  MISUMI

  TS coated carbide chamfering end mill, 2-flute / 15° spiral

  [Features] -The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool-The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	90	3 ～ 12	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Carbide	Available	TS

  Preço regular (excluindo IVA):

  42.10 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  MISUMI

  TS coated carbide chamfering end mill, 2-flute / short model

  [Features] -Ideal for chamfering. Can also be used as a deburring tool-Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting-Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	60 ～ 120	3 ～ 12	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Carbide	Available	TS

  Preço regular (excluindo IVA):

  38.81 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  MISUMI

  TS coated carbide chamfering end mill, 3-flute / short model

  [Features] -Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).-Peripheral grooves allow bevel, contour and spiral cutting-The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type-With helix angle on peripheral flutes-Can also be used as a deburring tool-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	90	3 ～ 12	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Carbide	Available	TS

  Preço regular (excluindo IVA):

  46.59 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes

  MISUMI

  TS coated carbide inner R-cutter, 2-flute

  [Features] Easy high-quality machining of corner radii-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Round Chamfer	-	-	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Carbide	Available	TS

  Preço regular (excluindo IVA):

  50.04 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • Non-Coated
  • General Steel
  • 2 Flutes

  MISUMI

  Carbide inner R-cutter, 2-flute

  Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Round Chamfer	-	-	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Carbide	N/A	-

  Preço regular (excluindo IVA):

  49.42 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • TS
  • SUS
  • 2 Flutes

  MISUMI

  TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

  The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	90	3 ～ 12	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Single blade	N/A	Carbide	Available	TS

  Preço regular (excluindo IVA):

  74.67 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • Non-Coated
  • Aluminum
  • 2 Flutes

  MISUMI

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

  Capable of everything from positioning to chamfering in a single shot

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	90	3 ～ 12	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Single blade	N/A	Carbide	N/A	-

  Preço regular (excluindo IVA):

  40.79 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount
  • Non-Coated
  • Aluminum
  • 2 Flutes

  MISUMI

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

  The sharp helix blade achieves the clean machined surface with less burr

  Ler mais

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	90	3 ～ 12	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Single blade	N/A	Carbide	N/A	-

  Preço regular (excluindo IVA):

  72.54 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type

  [Features]・MISUMI's original inner radius cutter specialized for machining high hardness steel.・Ideal for high hardness steel inner radius machining up to 65 HRC.・High-efficiency machining is possible by adopting a 4-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.

  Ler mais

  CAD:

  2D

  /3D

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Round Chamfer	-	-	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[◎]	Single blade	N/A	Carbide	Available	AlCrN

  Preço regular (excluindo IVA):

  74.16 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type

  [Features]・Popular chamfering product with helix angle.・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  Ler mais

  CAD:

  2D

  /3D

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	-	-	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Carbide	Available	AlCrN

  Preço regular (excluindo IVA):

  37.71 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

  [Features]・Machining from positioning to chamfering with a single tool.

  Ler mais

  CAD:

  2D

  /3D

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	-	-	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Carbide	Available	AlCrN

  Preço regular (excluindo IVA):

  42.61 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  XAL Series Carbide Chamfer End Mill 2-Flute

  [Features]・Recommended for chamfering general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  Ler mais

  CAD:

  2D

  /3D

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	-	-	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Carbide	Available	AlCrN

  Preço regular (excluindo IVA):

  32.62 €～

  Data de envio regular:

  5 dias úteis

  Configurar
• 

  • Volume Discount

  MISUMI

  XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

  [Features]・Recommended for deep section chamfering of general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.・The long type is ideal for deep cavity milling.

  Ler mais

  CAD:

  2D

  /3D

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	-	-	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Carbide	Available	AlCrN

  Preço regular (excluindo IVA):

  43.97 €～

  Data de envio regular:

  5 dias úteis

  Configurar