Tooling（Product Category：Measuring equipment）

?* Information on days to ship and prices

• 

  Point Master Pro

  BIG KAISER

  [Features]
  · Ideal for a high-speed machining center with ceramic bearings. Instantly detects the reference point even for non-conductive workpieces or machines

  Select to compare

  Configure now
  Starting from∗ ：	831.12 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Point Master (PMG Series / Straight Shank Type)

  BIG KAISER

  [Features]
  · Instantly transmits touch position with LED lamp. A straight shank type.

  Select to compare

  Configure now
  Starting from∗ ：	328.60 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Accu Center (High-Precision Centering Bar)

  BIG KAISER

  [Features]
  · High-precision positioning done with a simple mechanical design. Measurements can be completed by simply attaching a probe to the end face of the workpiece.
  · Repeatability within 3 μ (vertical type).
  · A hard chrome plating of excellent durability has been adopted for the probe.

  Select to compare

  Configure now
  Starting from∗ ：	67.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Accu Stand Magnetic-Base Type

  BIG KAISER

  Select to compare

  Configure now
  Starting from∗ ：	406.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Level Master

  BIG KAISER

  [Features]
  · For level management of machine tools/precision assembly machinery
  · 2-axis simultaneous detection level
  · Alerts to completion of leveling operation with an LED and buzzer
  · Uses an optical level detection sensor
  · 2-axis simultaneous detection dramatically reduces cost and inspection time compared to conventional leveling work using 2 levels

  Select to compare

  Configure now
  Starting from∗ ：	1,193.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Centering Gauge

  NISSIN SANGYO

  Centering gauge, a centering classic. Additionally, three-dimensional measurement such as inner diameter, outer diameter, steps and circles can be performed at high accuracy.
  When the probe is mounted onto the spindle and then brought into contact with the workpiece, the LED emits light and measurement can be done easily.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	256.76 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Accu Stand (ASP-M)

  BIG KAISER

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	404.45 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Point Master (PMC Series / Straight Shank Type)

  BIG KAISER

  [Features]
  · Instantly transmits touch position with LED lamp and buzzer.
  · Notifies reduction of battery life via flashing LED during workpiece measurement.
  · A straight shank type.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	397.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Centering Bar

  FUJI TOOL

  [Features]
  · Can be used for everything from machining centers to NC milling machines.
  [Applications]
  · For general machine, NC machine, machining center, and other factory machine X and Y axis origin point location testing.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	99.40 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Non-Magnetic Small Point Finder i

  NISSIN SANGYO

  Used exclusively for small, high speed machining centers.
  
  [Features]
  · It can also be used for compact high-speed machining centers for molding mobile phones and digital appliances.
  · It can be used with a ceramic spindle and has a nonmagnetic stylus, so there are no measurement errors due to magnetic force

  Select to compare

  Configure now
  Starting from∗ ：	1,506.37 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Reference Position Detection Bar Magic Center

  KASAHARA

  As it has a simple structure and measurement terminal that does not easily get magnetized, high measurement accuracy can be maintained for a long time. Measurement accuracy is within 2 microns

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	96.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Reference Position Detection Bar Spring for Replacement of Magic Center

  KASAHARA

  One spring includes 2 hooks.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.65 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tool Setter - Internal Contact Type (Supports Non-Conductive Workpieces)

  NISSIN SANGYO

  An ultra-precise tool setter with a detection accuracy of 1 μm.
  
  [Features]
  · An ultra-precise tool setter with a detection accuracy of 1 μm.
  · Uses scratch-resistant ceramic for the cutting edge detection part.
  · Ideal for detecting the position of the cutting edges of small diameter drills and end mills.
  · Adopts an internal contact system that can be used for non-conductive workpieces and machining centers with ceramic spindles.
  · Magnet on base plate.
  · Can be used with both vertical and horizontal types.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	637.01 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Tool Point

  NIIGATA SEIKI

  A presetter used as a high precision positioning detector for milling cutters and machining centers.
  [Features]
  · Finds the 0 point rapidly with light sensor. (Conductivity)
  [Applications]
  · For setting the reference position in the Z direction.
  · Used for setting the zero point reference for standard to precision tolerance on general purpose and NC milling machines, machining centers, etc.

  Select to compare

  Configure now
  Starting from∗ ：	331.44 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Stylus Center

  NIIGATA SEIKI

  Presetter optimal for high-precision X/Y-axis centering bar.
  [Applications]
  · It can detect the reference position within 2 μm.
  · Ideal for determining accurate reference points for general use, NC milling cutter and MC origin positions, etc.
  · Lapping finish is applied to working surface, which is the foundation of accuracy.
  · Enables positioning by simply placing the probe on the end face of the workpiece.
  · Suitable rotation speed: 450 to 600 rpm; over-increasing the rotation speed can cause damage.
  [Applications]
  · Used as a high-precision X/Y-axis centering bar.

  Select to compare

  Configure now
  Starting from∗ ：	98.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamp Piece for φ6 Accu Stand

  BIG KAISER

  [Features]
  Tip hole ø8, side hole ø6
  [Features]
  Please purchase if using ø6 dial gauge.

  Select to compare

  Configure now
  Starting from∗ ：	25.51 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Point Master Replacement Stylus

  BIG KAISER

  [Features]
  · Point Master replaceable stylus.
  · Stylus portion can be detached and an M3 screw-in type is used, meaning that the stylus can be replaced based on the workpiece shape should the stylus suffer damage

  Select to compare

  Configure now
  Starting from∗ ：	89.08 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Point Master (PMC Series / BT / BBT Shank Type)

  BIG KAISER

  [Features]
  · Instantly transmits touch position with LED lamp and buzzer.
  · Notifies reduction of battery life via flashing LED during workpiece measurement.
  · BT/BBT shank type.

  Select to compare

  Configure now
  Starting from∗ ：	503.09 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tool Setter i

  NISSIN SANGYO

  Blade position with cutting tool diameter of φ0.05 mm can be detected. Machine-mounted tool length measurement instrument for high-speed spindle type machining center.
  
  [Features]
  · Developed for machining centers with ceramic spindles.
  · Can also be used for non-conductive workpieces because of the internal contact system.
  · Uses scratch-resistant ceramic for the cutting edge detection part. High-luminosity LED (blue) notifies the user of position detection.
  · A magnet is attached to the bottom to support both vertical and horizontal use.

  Select to compare

  Configure now
  Starting from∗ ：	640.77 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Non-Magnetic Buzzer Specification Point Finder

  NISSIN SANGYO

  [Features]
  · The LED will light with a small contact pressure of 0.1 gf between the stylus and the workpiece.
  · Accurate measurement, even on thin workpieces.
  · Includes buzzer with simultaneous electronic sound and LED to provide notification of position detection.
  · Safe design that allows the stylus to swing in X/Y/Z directions.
  · The measurement accuracy of metals and nonferrous metals has been dramatically improved

  Select to compare

  Configure now
  Starting from∗ ：	662.98 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Non-Magnetic Small Point Finder

  NISSIN SANGYO

  Used exclusively for small, high speed machining centers.
  
  [Features]
  · It can also be used for compact high-speed machining centers for molding mobile phones and digital appliances.
  · It can be used with a ceramic spindle and has a nonmagnetic stylus, so there are no measurement errors due to magnetic force

  Select to compare

  Configure now
  Starting from∗ ：	931.94 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Non-Magnetic Point Finder Stylus

  NISSIN SANGYO

  The non-magnetic carbide stylus has been crafted using our unique production method. Technology that owes its existence to the total comprehension of work sites.
  
  [Features]
  · It is not subject to measurement error due to the influence of magnetic force.
  · No need to demagnetize or replace the stylus.
  · No rusting.
  · Low-temperature welding, preventing thermal stress.
  · Economical with the same price as a general stylus.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	179.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  For Non-Magnetic Stylus Center Ring Gauge Swing Type

  NISSIN SANGYO

  ● There is no measurement error due to magnetism.
  ● Demagnetized, so there is no need to replace styluses, which improves work efficiency.
  ● Permeability (μ) ≤ 1.01 → Non-Magnetic
  ● Sphericity: Within 0.6 μm
  ● Hardness: HRA 92
  ● Specific Electrical Resistance: 3.2 μΩ (1/3 that of Iron)
  ● Wire Expansion Coefficient: 1.2 x 10-6 (1/10 that of Iron)
  ● No Rusting
  ● Unique low-temperature welding technology does not crack easily, and there is no residual inside stress, so deterioration does not occur due to aging.
  ● Economical with the same price as a general stylus.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	211.56 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Point Master Pro PMPC Series Straight Shank Type

  BIG KAISER

  [Features]
  · Detects reference point instantly even on non-conductive workpieces or machines.
  · Notifies user of touch position with LED and an electronic beep.

  Select to compare

  Configure now
  Starting from∗ ：	885.83 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Accu Stand Mini Mini Type Gauge Support Set

  BIG KAISER

  [Features]
  Mini-mini type of gauge support.
  ·This ultra-precise flexible arm stand uses heavy-duty cam mechanism to securely lock the arm
  ·This Accu stand is designed to be lightweight and compact, suitable for small machines with frequent interference and short strokes

  Select to compare

  Configure now
  Starting from∗ ：	51.49 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Digital Height Master, Inch

  MITUTOYO

  This is a standard model with a digital display, that offers you the following benefits:
  - It gives you all the essential specifications required for a versatile height standard.
  - You can use it to calibrate and set height gauges and other measuring instruments.
  - Models have two measuring faces on the same level, one facing up and the other down.

  Select to compare

  Configure now
  Starting from∗ ：	3,730.26 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Digital Height Master

  MITUTOYO

  This is a standard model with a digital display, that offers you the following benefits:
  - It gives you all the essential specifications required for a versatile height standard.
  - You can use it to calibrate and set height gauges and other measuring instruments.
  - Models have two measuring faces on the same level, one facing up and the other down.

  Select to compare

  Configure now
  Starting from∗ ：	3,730.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cylindrical Measuring Pin DIN 2269, Set

  MITUTOYO

  This is a complete incremental set of plug (or pin) gauges, that offers you the following benefits:
  - It includes 91 or 273 pieces that you can use in the inspection room, or on the shop floor in tool and fixture making.

  Select to compare

  Configure now
  Starting from∗ ：	2,070.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Check Master, Inch

  MITUTOYO

  This Check Master allows you to test precision tool and coordinate measuring machines, and offers you the following benefits:
  - You can test the X, Y and Z-coordinate axes of precision tool machines and coordinate measuring machines.
  - It consists of rigidly clamped gauge blocks with a step of 10mm.
  - It is supplied in a fitted wooden case.

  Select to compare

  Configure now
  Starting from∗ ：	3,388.16 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Check Master

  MITUTOYO

  This Check Master allows you to test precision tool and coordinate measuring machines, and offers you the following benefits:
  - You can test the X, Y and Z-coordinate axes of precision tool machines and coordinate measuring machines.
  - It consists of rigidly clamped gauge blocks with a step of 10 mm.
  - It is supplied in a fitted wooden case.

  Select to compare

  Configure now
  Starting from∗ ：	3,388.16 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Center Support

  MITUTOYO

  For Profile Projectors and Measuring Microscopes

  Select to compare

  Configure now
  Starting from∗ ：	1,608.32 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Center Master

  MITUTOYO

  This Mitutoyo centre probe allows quick measurement of centre to centre distance between holes.

  Select to compare

  Configure now
  Starting from∗ ：	161.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...