Tooling（Spindle types：BT40 Page 2）

?* Information on days to ship and prices

• 

  WMH Wedge Mill Holder

  MANYO TOOLS

  [Features]
  · Lightly tightening the clamp screw alone makes the wedge work powerfully on the flat part of the end mill, tightly locking the end mill
  · The wedge tightening system guarantees maximum rigidity and accuracy
  · No Sliding or Dropping Out for Extra Heavy Cutting
  · No hammer is required for tightening and loosening (only light tightening is required, as cutting force will automatically tighten the endmill)
  · The wedge tightens the flat section of the end mill, with gripping force several times higher than the side lock holder

  Select to compare

  Configure now
  Starting from∗ ：	353.85 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  MTA Morse Taper Holder Type A

  MANYO TOOLS

  [Features]
  · Various types are available, compatible with all sorts of drilling. For use with a Morse taper drill installed

  Select to compare

  Configure now
  Starting from∗ ：	143.81 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  SA Series BT-SA-III Type Tapper (Bottle Grip Taper Shank)

  KATO MFG

  [Features]
  · Best-selling "Kato Tapper"
  · Sizing type screw depth built-in limiting device
  · Tapper that works with all machinery, workpieces, and cutting conditions
  · Ideal for machining valuable workpieces such as prototypes, single articles, molds, etc.
  · The specifications, such as the strength of the spring and extension/contraction amount, can be changed to match the usage conditions.
  · The expansion device absorbs feed errors to realize high thread accuracy

  Select to compare

  Configure now
  Starting from∗ ：	582.22 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  α Tooling Cleaner

  BIG KAISER

  [Features]
  · The taper and flange face are cleaned simultaneously.

  Select to compare

  Configure now
  Starting from∗ ：	28.90 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  DAISHOWA SEIKI Auto Tapping Tool B Type

  BIG KAISER

  [Features]
  · Simple, compact and low priced.
  The variation of the depth of the tap can be kept at ±0.15 mm and is ideal for work done with pipe taps and blind-hole tapping.
  A best seller from the Auto Tapper series.

  Select to compare

  Configure now
  Starting from∗ ：	305.45 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Auto Tapper E

  BIG KAISER

  [Features]
  · Smoother Float Function (Axial Direction) and Tapper with Built-in Torque Limiter
  · Most suitable for tapping cycles in machining centers
  · Our Original One-Way Torque Limiter
  · The BIG AUTO TAPPER series uses a unique one-way torque limiter that does not work while in reverse, allowing safe tapping.

  Select to compare

  Configure now
  Starting from∗ ：	241.04 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Side Locking End Mill Holder (BT Shank)

  BIG KAISER

  [Features]
  · Thick-design side lock holder. Supports lateral feeding for endmills.

  Select to compare

  Configure now
  Starting from∗ ：	107.43 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Facemill Arbor A Type

  BIG KAISER

  [Features]
  A dual contact type.
  Spindle/shaft style: BT
  (See manufacturer's catalogue for details).

  Select to compare

  Configure now
  Starting from∗ ：	102.09 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Facemill Arbor H Type / BT40, 50 / Center Through (Blade Through)

  BIG KAISER

  [Features]
  · A face mill arbor for cutters that support through-tool cooling, reliably supplying coolant and air to the cutting edge.
  

  Select to compare

  Configure now
  Starting from∗ ：	171.00 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Bull Point (Center Through Type)

  BIG KAISER

  [Features]
  · High-quality durable pull bolt, made using highly reliable materials. A center through type

  Select to compare

  Configure now
  Starting from∗ ：	26.20 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  Point Master Pro

  BIG KAISER

  [Features]
  · Ideal for a high-speed machining center with ceramic bearings. Instantly detects the reference point even for non-conductive workpieces or machines

  Select to compare

  Configure now
  Starting from∗ ：	1,300.00 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Mega Synchro Tapping Holder (BBT Shank)

  BIG KAISER

  [Features]
  · Thrust load caused by synchronization error is reduced to 1/10 to improve thread precision and tap longevity.
  · In addition to various tap sizes, the long tap holder is standardized.

  Select to compare

  Configure now
  Starting from∗ ：	196.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mega Micro Chuck (High Rigidity Type)

  BIG KAISER

  [Features]
  · Supports ultra small diameter end mill processing.
  · Ultra-slim design with world's smallest 10 nut outer diameter.
  · Slim, high speed rotation holder designed to prevent interference with workpiece and jig.

  Select to compare

  Configure now
  Starting from∗ ：	232.15 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  BT40 Super G1 Chuck

  YUKIWA SEIKO

  The ultimate tool holder. Satisfies all the user's needs with high accuracy, high rigidity, high gripping force, high balance, and safety

  Select to compare

  Configure now
  Starting from∗ ：	242.09 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  BT40/BT50 New Drill Mill Chuck

  YUKIWA SEIKO

  High rigidity, high precision drill mill chuck compatible with high pressure coolants

  Select to compare

  Configure now
  Starting from∗ ：	245.76 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  BT Shank Jacobs Taper Arbor

  YUKIWA SEIKO

  Jacobs Taper Arbor is used in combination with drill chucks with Jacobs Taper. The taper range is extremely large, enabling powerful installation.

  Select to compare

  Configure now
  Starting from∗ ：	117.09 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  BT Shank Tap Holder

  YUKIWA SEIKO

  Torque control that boasts outstanding durability. Revolutionary. Double Roller Clutch Mechanism

  Select to compare

  Configure now
  Starting from∗ ：	372.04 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Super Keyless Dream Chuck

  YUKIWA SEIKO

  For drilling and tapping: One unit plays two roles.
  
  [Features]
  · Adopts a reverse rotation locking function that enables machining in reverse.
  · Tap stand can process up to M16.
  · Loosening prevention is realized with a single touch.
  · Prevents loosening even with instantaneous stops during high speed rotation.
  · The same cutting torque can be achieved with both forward and reverse rotation.
  · Can be retightened using a hook wrench, improving safety.
  · Compact design: Same dimensions as conventional keyless chuck. A logical short-mount design.
  · Runout accuracy of 0.05 mm or less: Meets JIS B 4634 with a standard test bar, maximum grasping diameter, and 1/2 diameter measurement.
  · No loosening, even when the spindle stops suddenly: Includes key lock function through lock ring operation.
  · Function improvements for greater safety: Adopts a completely integrated shank structure to prevent falling out while rotating.

  Select to compare

  Configure now
  Starting from∗ ：	359.17 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  BT Shank CNC Keyless Drill Chuck

  YUKIWA SEIKO

  [Features]
  · A strong grip with high accuracy.
  · Machining center buddy.
  · Perfect for drilling. Integral-type BT shank and chuck. Greater safety and reliability: The conventional tapered holder B and chuck are tightly fastened to prevent dropout during rotation and cutting.
  · Increased power with hook wrench. No loosening even if spindle stops suddenly. Retightening with attached hook wrench increases gripping force.
  · It does not loosen or slip, so safety and security are ensured for unmanned operations, etc.
  · Much shorter and more compact. Short Mount Design: Taper Holder

  Select to compare

  Configure now
  Starting from∗ ：	297.34 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Drill Chuck for NC

  NIKKEN KOSAKUSHO

  [Features]
  · Since the shank body and keyless drill chuck are integrated, there are no concerns about falling out.
  · Supports a heavy duty fastening wrench for safe human-free operation without the drill coming out.
  · Has 3 times higher tightening force compared to conventional products, ideal for carbide drills too.

  Select to compare

  Configure now
  Starting from∗ ：	247.97 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Jacobs Taper Adapter

  NIKKEN KOSAKUSHO

  [Features]
  · With 80% or more per taper, there is no runout.

  Select to compare

  Configure now
  Starting from∗ ：	145.35 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Morse Taper Sleeve A Type (Tank Type)

  NIKKEN KOSAKUSHO

  [Features]
  · With 80% or more per taper, there is no runout.

  Select to compare

  Configure now
  Starting from∗ ：	128.48 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Automatic Sizing Tapper Chuck

  NIKKEN KOSAKUSHO

  [Features]
  · Ideal for gas taps, taps with a base, and lightweight alloys. When the machine forward feed is stopped at a designated point, the tap will continue for the set amount only (4 mm for ZL12 type) before idling.
  · Simply reverse it afterwards to align the tap depth at high precision.

  Select to compare

  Configure now
  Starting from∗ ：	242.71 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Tapper Chuck

  NIKKEN KOSAKUSHO

  [Features]
  · A tapper ideal for interactive machining centers.
  · Enables safe and reliable tapping, with stable torque and slim design that further improve ease of use.
  · Unmanned operation-orientated tap holding system (PAT).
  · No deflection, detachment, or breakage.

  Select to compare

  Configure now
  Starting from∗ ：	251.16 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Front Face Mill Arbor Type A

  NIKKEN KOSAKUSHO

  [Features]
  · JIS B4113 face mill cutter tapered at 80% or more for zero chatter.

  Select to compare

  Configure now
  Starting from∗ ：	112.63 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Shoulder Cutter Arbor

  NIKKEN KOSAKUSHO

  [Features]
  · With 80% or more per taper, there is no chattering.

  Select to compare

  Configure now
  Starting from∗ ：	106.59 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  High Pressure Center Through Slim Chuck

  NIKKEN KOSAKUSHO

  [Features]
  · A high pressure center-through type slim chuck. Nuts are included.

  Select to compare

  Configure now
  Starting from∗ ：	256.57 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Flange Through Slim Chuck

  NIKKEN KOSAKUSHO

  [Features]
  ● Slim flange through chuck.
  ● Spindle/shank shape: BT
  ● Accessories: Nut.

  Select to compare

  Configure now
  Starting from∗ ：	420.06 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Side Locking Oil Hole Holder

  NIKKEN KOSAKUSHO

  [Features]
  · A side lock type oil hole holder.
  · Max. coolant pressure: 2.5 MPa.

  Select to compare

  Configure now
  Starting from∗ ：	769.73 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Zero Fit Type Milling Chuck (BT Shank)

  NIKKEN KOSAKUSHO

  [Features]
  · It is a Zero Fit type milling chuck (BT shank).

  Select to compare

  Configure now
  Starting from∗ ：	434.11 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  NIKKEN Microtouch for Machining Center

  NIKKEN KOSAKUSHO

  [Features]
  · 3D electronic reference point detector.
  · 3 Repeatability: ±2 μ swing type touch sensor.
  · 3 Large overtravel with red lamp and electronic buzzer that alert the touch position.
  · Red lamps around the entire periphery illuminate instantly with 3 touches.

  Select to compare

  Configure now
  Starting from∗ ：	599.85 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Automatic Tapping Oil Supply Holder

  NIKKEN KOSAKUSHO

  [Features]
  · Before tapping, the necessary amount of oil or grease is replenished automatically to improve tap runout accuracy and tap life.

  Select to compare

  Configure now
  Starting from∗ ：	837.24 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Pull Circle Attachment / Removal Tool Dedicated for Pull Bolt Pull Circle (BT40)

  THE CUT

  Select to compare

  Configure now
  Starting from∗ ：	91.25 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Pull-Stud Bolt (MAS Standard)

  TAKURA KOGU

  TAKURA KOGU SEISAKUSYO milling arbor pull stud bolt (MAS standard)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	41.44 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Two-Plane Restraint BBT Shank Hydro Chuck Jet-Through Type

  BIG KAISER

  [Features]
  · For a variety of high accuracy machining, including automotive parts machining and mold machining.
  · Slim design holding workpiece interference to a minimum. Optimal for mold engraving.

  Select to compare

  Configure now
  Starting from∗ ：	478.00 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Super Keyless Chuck

  BIG KAISER

  [Features]·Easy operation and reliable chucking of drills. ·Big Plus (BBT shank) tools can be used on Big Plus main shanks and machine with conventional BT main shanks. ·1 hook wrench is included.

  Select to compare

  Configure now
  Starting from∗ ：	281.03 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cleaning Quill

  GIGA SELECTION

  [Features]
  · Can be mounted to an existing machining center (BT/HSK holder type model with through coolant function)
  · Housed in a magazine, is only mounted to the main spindle by ATC when in use, and is removed in the same way
  · Head nozzle is variable from 0 to ±110° (stepless and fixed)
  · Equipped with a fixed bar inside the machine for varying the nozzle angle, and the angle of the arm can be changed automatically when spindle operation X, Y or Z are used so that the arm makes contact with the fixed bar
  · The tip nozzle can swing up to 110° on one side, allowing coolant to also be sprayed on the front side of the spindle
  · Directly mounted on the spindle so it turns when the spindle rotates, allowing repeated spraying via the XY axis
  · When using a horizontal machining center, chip removal is possible in an orthogonal direction with the nozzle at 90°
  · Can be used from the day it is mounted without adding any modifications to the machining center (adjust the nozzle angle manually)
  · Aim the coolant spray at flat sections, including the telescopic cover and machine cover inside the machining center, to provide effective machine maintenance
  · Can be used for many types of chip shapes if the tip nozzle is replaced with a straight or diffusion nozzle (R1/8)

  Select to compare

  Configure now
  Starting from∗ ：	810.98 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...