Jigs for Manual Tightening

?* Information on days to ship and prices

• 

  Installation Clamping Module, Screw-In Version, 6203L

  AMF

  Installation clamping module, screw-in version
  Pneumatic opening.
  Opening operating pressure: min. 6 bar - max. 12 bar.
  Cover and piston hardened.
  Repeatability < 0.02 mm.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	548.34 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Clamping Module, Screw-In Version, 6215RP

  AMF

  Clamping module, screw-in version
  Pneumatic opening.
  Opening operating pressure: min. 5 bar - max. 12 bar.
  Housing and piston hardened.
  Repetition accuracy < 0.1 mm.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	204.21 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  6400 Screw jack with flat support

  AMF

  Screw jack with flat support Centring hole dia. 12 mm. Spindle: Trapezoidal thread, self-locking with end stopbody. Tempering steel, varnished. The product is available per 1 peace.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	39.54 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Hook type toggle clamps for pulling action

  GANTER

  The draw hook of the GN 850 hook type toggle clamps can be adjusted within the stroke.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.70 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  6314V Tapered clamp with adjusting support screw

  AMF

  Tapered clamp with adjusting support screw Tempering steel, varnished. The product is available per 1 peace.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	29.62 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  6490 Low height clamping jaws, model Bulle

  AMF

  Low height clamping jaws, model Bulle tempered and burnished. Packing: 2 units in carton, complete with cap screw ISO 4762-10.9, T-nuts DIN 508 and hexagon key ISO 2936.
  Available in pairs only! The product is available per 1 peace.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	146.29 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamping Module with Detent Function, Mechanical, Screw-In Version, 6214RM-251

  AMF

  Clamping module with detent function, mechanical, screw-in version
  Mechanical opening.
  Housing and piston hardened.
  Repetition accuracy < 0.1 mm.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	190.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  6321 Stepless height adjustable clamp

  AMF

  Stepless height adjustable clamp Steel, forged and tempered, zinc-plated. The product is available per 1 peace.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	59.35 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  6405 Aluminium screw jack with magnetic base

  AMF

  Aluminium screw jack with magnetic base Centring hole dia. 12 mm. Spindle: Tempering steel, blued. Trapezoidal thread, self-locking with end stopbody. Base: Aluminium 400 N/mm2 tensile strength. The product is available per 1 peace.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	157.04 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  6497 Extra strong clamping jaw

  AMF

  Extra strong clamping jaw High design with exact prismatic guide.
  Main body: malleable iron.
  Clamping jaws: case-hardening steel, case-hardened. Reversible clamping jaws with smooth side for machined workpieces and serrated side for rough clamping surfaces. The product is available per 1 peace.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	397.67 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Flanged connector clamps / Aluminium / GN 146.3 / 2-with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bores of GN 146.3 flanged connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  GN 146.3 flanged connector clamps are also suitable for mounting on profile systems.
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.26 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  6435 Heavy screw jack

  AMF

  Heavy screw jack
  with nickel lock bolt. Centring hole D12 / M10. Spindle: Tempered steel, self-locking acme thread, with final stop. Spindle head burnished. Body: tempered steel, painted.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	398.87 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Toggle Down Clamp 6830

  NABEYA

  [Features]
  · 6830: SS400/6830NI: SUS304, 6830: Zinc-plated toggle-down clamp 6830. 6830S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

  Select to compare

  Configure now
  Starting from∗ ：	63.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  6322B Low type tenons

  AMF

  Low type tenons Steel C15, case hardened and ground. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.03 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Base plate connector clamps / Aluminum / GN 162.3 / 2-with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bore of GN 162.3 base plate connector clamps is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  Base plate connector clamps GN 162.3 are also suitable for mounting on profile systems.
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Base plate connector clamps / Aluminum / GN 163 / 2-with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bores of GN 163 base plate connector clamps are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.26 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Double Swing Clamp S Type

  NABEYA

  This product can clamp 2 workpieces at the same time. Due to its compact structure (cylinder diameter 10 mm to 30 mm), it can be used in small spaces. The freely rotating structure saves time when loading and unloading the workpieces.

  Select to compare

  Configure now
  Starting from∗ ：	84.55 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6803

  NABEYA

  [Features]
  · SS400 and galvanized toggle down clamp 6803.
  · 6803S: Since it has a structure where it cannot be operated unless the safety lever is gripped, it prevents error operation and malfunction.

  Select to compare

  Configure now
  Starting from∗ ：	99.55 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locating Pin (Adjustable Round Pin)

  NABEYA

  [Features]
  · A single wrench with the positioning repeatability of 5 μm.
  · Zero clearance with the reference hole and use of a high precision positioning pin makes it ideal for replacing plates or small-scale generalization.
  · The locating adjustment pin is a manually operated high-precision positioning pin whose diameter expands and contracts.
  · Locating adjustable pin creates zero gap.

  Select to compare

  Configure now
  Starting from∗ ：	142.23 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  6500E Universal step blocks

  AMF

  Universal step blocks Step increments: vertical 4.65 mm, horizontal 2.3 mm.
  Tempering steel, varnished. The product is available per 1 peace.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.98 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  6843 Angle base, solid

  AMF

  Angle base, solid for no. 6840 and no. 6844.
  Increased range of application due to enlarged height of center line. Fastening by means of 4 screws. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.90 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Flanged connector clamps / Aluminium / GN 147 / 2-with Stainless Steel-clamping screw DIN 912

  GANTER

  The clamping bores of GN 147 flanged connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The square designs are also suitable for use in profile systems.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	35.38 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Clamping Module, Screw-In Version, Short Design, 6215RP-251

  AMF

  Clamping module, screw-in version, short design
  Pneumatic opening.
  Operating pressure for opening: min. 5 bar - max. 12 bar.
  Housing and piston hardened.
  Repetition accuracy < 0.1 mm.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	234.46 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Heavy Type Screw Jack

  NABEYA

  A screw jack for large workpieces. The manufacturer has a product lineup with a maximum load capacity of 40 KN to 80 KN and a minimum height of 200 mm to a maximum of 1,250 mm.

  Select to compare

  Configure now
  Starting from∗ ：	1,114.20 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Strap Clamp

  NEW STRONG

  [Features] Materials: EN 1.1191 Equiv., hardness: HRC35, black oxide coating, finish.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	20.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Vacuum Chuck

  NABEYA

  [Features]
  · Adsorption of workpieces is possible by simply supplying air from a compressor.
  · Supports non-magnetic workpieces such as aluminum, stainless steel, and copper, etc. with which a magnetic chuck cannot be used.
  · VCM0303E.
  · Supply valve can only turn the adsorption ON or OFF.
  · VCM0303S.
  · Adsorption and air blowing are both possible using the changeover switch.
  · The current adsorption force can be confirmed by vacuum pressure gauge.
  · Adsorption force can be adjusted by vacuum regulator

  Select to compare

  Configure now
  Starting from∗ ：	2,454.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  508R Blanks for T-nuts

  AMF

  Blanks for T-nuts Tempering steel 0.35-0.45 % C. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.67 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  6322A Fixed type tenons

  AMF

  Fixed type tenons (previously DIN 6322 developed 1957)
  C15 case-hardened. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	37.84 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  6365 Clamping Jaws, serrated

  AMF

  Clamping Jaws, serrated Hardened steel The product is available per 1 peace.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	135.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Flanged connector clamps, Steel

  GANTER

  The clamping bores of GN 146 flanged connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.32 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Aluminum Screw Jack

  NABEYA

  Made of aluminum so doesn't scratch the base, clamps, etc. Convenient for use as a support jack for plastic clamp sets.

  Select to compare

  Configure now
  Starting from∗ ：	52.91 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamp Support Screw Jack

  NABEYA

  Clamp support screw jack is convenient for supporting a variety of clamps. When one unit is insufficient in operation or height, two or three units can be stacked together. (Only for same sizes) The attachment is convenient for supporting irregular objects.

  Select to compare

  Configure now
  Starting from∗ ：	53.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Height Setting Jack

  NABEYA

  With a hole at the upper center. (φ12) E-756 Attachment for jack can be used in combination. Bearing is embedded in thread component.

  Select to compare

  Configure now
  Starting from∗ ：	455.41 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Nut Runner Clamp Large Model

  NABEYA

  A clamp bar for L-type nut runners. This product can be additionally processed by the customer.
  
  [Features]
  · Torque control and speedy clamping can be performed by using Nut Runner.
  · Quasi-hydraulic operability, no piping is required so it is handy to use.
  · Clamp bar springs up to easily attach/detach the workpiece.
  · Free from troubles such as oil leakage as it does not use oil.

  Select to compare

  Configure now
  Starting from∗ ：	659.44 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Eccentric Height Cylinder

  NABEYA

  EN 1.7264 Equiv., Hardening HRC60 eccentricity height cylinder.
  Compatible bolts are M12/16.

  Select to compare

  Configure now
  Starting from∗ ：	64.47 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Screw Support-Use Tip

  NEW STRONG

  SST-7 & SST-70 have a flat surface (after machining) and support slanted workpieces. SST-8 & SST-80 are cast and forged

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	32.28 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  6312V Crocodile clamp, complete with DIN 787

  AMF

  Crocodile clamp with counterholder, adjustable complete with clamping bolt DIN 787, washer DIN 6340 and nut DIN 6330B. Infinitely adjustable, tempered, galvanised with captive compression piece and counter bearing. The product is available per 1 peace.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	90.77 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  6400M Screw jack with flat support and magnetic base

  AMF

  Screw jack with flat support and magnetic base Centring hole dia. 12 mm. Spindle: Self-locking trapezoidal thread with final stop. Painted tempered steel. The product is available per 1 peace.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	88.96 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamping plates for position indicators / GN 954.6 / B8, B10, B12, B14

  GANTER

  Clamping plates GN 954.6 are used in connection with position indicators GN 954 / GN 9054.
  In a simpler way and without large construction and installation effort these spindles can, after adjustment, be clamped and locked.
  At the same time these plates are fitted with the bore Ø 6,1 to accept the torque limiter for the position indicator.
  The spacer can be installed so that it lies as required either to the right or the left.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.12 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Module, Mechanical, Screw-In Version, 6214M

  AMF

  Clamping module, mechanical, screw-in version
  Mechanical opening.
  Housing and piston hardened.
  Repetition accuracy < 0.1 mm.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	156.00 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Installation Clamping Module, 6206LA

  AMF

  Installation clamping module
  Pneumatic opening.
  Pneumatic blow-out.
  Opening operating pressure:
  KP5.3 min. 5 bar - max. 12 bar.
  KP10.3 min. 5 bar - max. 12 bar.
  KP20.3 min. 4.5 bar - max. 12 bar.
  Cover and piston hardened.
  Repeat accuracy < 0.005 mm.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,306.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Support element, eccentric free-cutting steel (02390)

  NORELEM

  · Flexible positioning through off-centre fastening hole
  
  · Contact faces ground and tempered
  
  · Fastened with a socket head screw
  
  · Various heights available
  
  · For supporting workpieces

  Select to compare

  Configure now
  Starting from∗ ：	27.79 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Screw jack, stainless steel (02171)

  NORELEM

  · Supporting overhanging clamping points
  
  · Prevents vibrations and bending
  
  · Height-adjustable
  
  · Flexible positioning
  
  · Self-locking trapezoidal thread

  Select to compare

  Configure now
  Starting from∗ ：	64.13 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  6430 Atlas screw jack with counter nut

  AMF

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	121.81 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Screw jack, carbon steel (02170)

  NORELEM

  · Supporting overhanging clamping points
  
  · Prevents vibrations and bending
  
  · Height-adjustable
  
  · Flexible positioning
  
  · Self-locking trapezoidal thread

  Select to compare

  Configure now
  Starting from∗ ：	30.33 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...